Effect of supplementing compost with grapeseed meal on Agaricus bisporus production

BACKGROUND: This work assesses the agronomic performance of grapeseed meal, before and after oil extraction, in nutritional compost supplement when growing the mushroom species Agaricus bisporus (Lange) Imbach. The effect of formaldehyde treatment before using this compost is also considered. Materials were applied at different doses at spawning. Along with non-supplemented compost, three commercial nutritional supplements were used as controls.RESULTS: In general terms, grapeseed meal performance was similar to that of commercial delayed-release nutrients, but improved the non-supplemented compost response. We highlight that grapeseed enhances performance as larger yields of harvested mushrooms were obtained with greater dry weight content; however, their protein content was lower. The best performance was displayed by fresh formaldehyde-treated grapeseed (6000 ppm) when applied to the 10 g kg(-1) compost dose.CONCLUSIONS: Our findings suggest that grapeseed meal offers a great potential to be applied on a commercial scale. The addition of grapeseed resulted in an enhanced performance as shown by the higher number of harvested mushrooms. The use of grapeseed meal (extracted or non-extracted), a low-cost ingredient with high levels of carbohydrates, may suppose an economic profit on the basis of the positive effect of adding carbon in the mushroom cultivation. (C) 2012 Society of Chemical Industry

Screening Botryosphaeria species for lipases: Production of lipase by Botryosphaeria ribis EC-01 grown on soybean oil and other carbon sources

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison of Botryosphaeran production by the ascomyceteous fungus Botryosphaeria sp., grown on different carbohydrate carbon sources, and their partial structural features

The influence of glucose concentration and other carbohydrates (monosaccharides: fructose, galactose, mannose; polyols: mannitol and sorbitol; disaccharides: lactose, sucrose and commercial sucrose; and industrial sugarcane molasses) were compared as sole carbon sources for the production of Botryosphaeran, an exopolysaccharide (EPS) produced by Botryosphaeria sp. The optimum glucose concentration for EPS production was 50 g 1(-1). With the exception of mannitol, the fungus produced EPS on all carbon sources studied, with highest yields occurring with sucrose followed by glucose. All EPS showed exclusively glucose after acid hydrolysis and monosaccharide analysis. FTIR spectroscopy demonstrated the presence of beta-anomers indicating that all the EPS produced by Botryosphaeria sp. on the different carbon sources were essentially of the beta-D-glucan type.

Pyrolysis and auto-gasification of black liquor in presence of ZnO: An integrated process for Zn/ZnO nanostructure production and bioenergy generation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The benefits of ethanol use for hydrogen production in urban transportation

The purpose of this paper is to describe the benefits of sugar cane ethanol in Brazil, appointing the productivity of this type of fuel based on hectares of plantation, its carbon dioxide cycle and the contribution to reduce the greenhouse effect. In the following step the uses of ethanol for hydrogen production by steam reforming is analyzed and some comparison with natural gas steam reforming is performed. The sugar cane industry in Brazil, in a near future, in the hydrogen era, could be modified according to our purpose, since besides the production of sugar, and ethylic and anhydric alcohol, Brazilian sugar cane industry will also be able to produce biohydrogen.Fuel cells appear like a promising technology for energy generation. Among several technologies in the present, the PEMFC (proton exchange membrane fuel cell) is the most appropriate for vehicles application, because it combines durability, high power density, high efficiency, good response and it works at relatively low temperatures. Besides that it is easy to turn it on and off and it is able to support present vibration in vehicles. A PEMFC's problem is the need of noble catalysts like platinum. Another problem is that CO needs to be in low concentration, requiring a more clean hydrogen to avoid fuel cell deterioration.One part of this paper was developed in Stockholm, where there are some buses within the CUTE (clean urban transport for Europe) project that has been in operation with FC since January 2004. Another part was developed in Guaratingueta, Brazil. Brazil intends to start up a program of FC buses. As conclusion, this paper shows the economical analysis comparing buses moved by fuel cells using hydrogen by different kinds of production. Electrolyze with wind turbine, natural gas steam reforming and ethanol steam reforming. (C) 2009 Elsevier Ltd. All rights reserved.

Production of a low young modulus titanium alloy by powder metallurgy

Titanium alloys have several advantages over ferrous and non-ferrous metallic materials, such as high strengthto-weight ratio and excellent corrosion resistance. A blended elemental titanium powder metallurgy process has been developed to offer low cost commercial products. The process employs hydride-dehydride (HDH) powders as raw material. In this work, results of the Ti-35Nb alloy sintering are presented. This alloy due to its lower modulus of elasticity and high biocompatibility is a promising candidate for aerospace and medical use. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by isochronal sintering between 900 up to 1600 °C, in vacuum. Sintering behavior was studied by means of microscopy and density. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Samples sintered at high temperatures display a fine plate-like alpha structure and intergranular beta. A few remaining pores are still found and density above 90% for specimens sintered in temperatures over 1500 °C is reached.

Prostaglandin E-2 production by high and low virulent strains of Paracoccidioides brasiliensis

The production of prostaglandins (PGs) during fungal infections could be an important suppressor factor of host immune response. Host cells are one source of prostaglandin E-2 (PGE(2)); however another potential source of PGE(2) is the fungal pathogen itself. Thus, both host and fungal PGE2 production is theorized to play a role in pathogenesis, being critical for growth of the fungus and to modulate the host immune response. The purpose of this work was to investigate if high and low virulent strains of Paracoccidioides brasiliensis have the capacity to produce PGE(2) in vitro, and if this production was related to the fungal growth. The results demonstrated that both strains of P. brasiliensis produce high levels of PGE(2) and the treatment with indomethacin, a cyclooxygenase inhibitor, significantly reduced the production of this mediator, as well as the viability of the fungus. Thus, our data indicate that PGE(2) is produced by P. brasiliensis by a cyclooxygenase-dependent metabolic pathway, and its production is required for fungal survival. This discovery reveals an important factor that has potentially great implications for understanding the mechanisms of immune deviation during infection.

Cytokine production in lungs and adrenal glands of high and low antibody producing mice infected with Paracoccidioides brasiliensis

Mice genetically selected for high (H) and low (L) antibody production (HIV-A and L-IV-A) were used in an experimental model of paracoccidioidomycosis. In a previous work, it was observed that male HIV-A animals were more susceptible to the infection due to adrenal gland damage. Male HIV-A and LIV-A animals were intravenously inoculated with Paracoccidioides brasiliensis (strain 18) and sacrificed 2, 4, 6, 8 and 10 weeks after inoculation. At each time interval, lungs and adrenals were removed to estimate recoverability of the fungus, as well as to determine Th1 (IFN-gamma, TNF-alpha) and Th2 (IL-4 and IL-10) cytokine profiles. While viable fungi recoverability from the lungs of HIV-A mice was higher after 4 and 8 weeks, there was less fungal recovery from the adrenals of LIV-A animals after the 2nd week, with total fungal elimination after the 8th week. With regard to Th2 cytokines, there was an inhibition in IL-4 production in the organs from infected animals, the extent of which varied according to the organ and the time period after initiation of infection. IL-10 production was found to be lower in both organs. Determination of Th1 cytokines revealed that IFN-gamma production increased in both organs, mainly in the adrenal of LIV-A after 8 and 10 weeks, when these animals showed a total fungal elimination. A significant difference was observed between HIV-A and LIV-A concerning TNF-alpha production in both organs and at all recovery times, in that LIV-A produced a higher level of this cytokine, mainly in the adrenal. These results may explain the high susceptibility of HIV-A to P. brasiliensis infection, is due, at least in part, to adrenal involvement. The higher production of Th1 cytokines by LIV-A in comparison to HIV-A mice may account for LIV-A resistance to P. brasiliensis infection. Our data reveal the importance of this experimental model in the study of the adrenal involvement in paracoccidioidomycosis, since this gland may be highly compromised in the patients, leading to the development of Addison's Disease.

Production of reactive oxygen (H2O2) and nitrogen (NO) intermediates and TNF-α in mice genetically selected for high (H) and low (L) antibody response and experimentally infected with Leptospira serovar pomona

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Xylanolytic complex from Aspergillus giganteus: production and characterization

An Aspergillus giganteus strain was isolated as an excellent producer of xylanase associated with low levels of cellulase. Optimal xylanase production was obtained in liquid VOGEL medium containing xylan as carbon source, pH 6.5 to 7.0, at 25degreesC and. under shaking at 120 rpm during 84h. Among the several carbon sources tested, higher xylanase production was verified in xylan, xylose, sugar-cane bagasse, wheat bran and corn cob cultures, respectively. Optimal conditions for activity determination were 50degreesC and pH 6.0. The xylanolytic complex of A. giganteus showed low thermal stability with T-50 of 2 h, 13 min and I min when it was incubated at 40, 50 and 60degreesC, respectively, and high stability from pH 4.5 to 10.5, with the best interval between 7.0 to 7.5. This broad range of stability in alkali pH indicates a potential applicability in some industrial processes, which require such condition. Xylanolytic activity of A. giganteus was totally inhibited by Hg+2, Cu+2 and SDS at 10 mm. The analysis of the products from the oat spelts xylan hydrolysis through thin-layer chromatography indicated endoxylanase activity, lack of debranching enzymes and P-xylosidase activity in assay conditions.

Xylanase production by Aspergillus versicolor

The xylanolytic system of Aspergillus versicolor is controlled by induction and carbon catabolite repression. Carboxymethylcellulose and wheat bran were the best inducers of xylanolytic activity. When the fungus was grown for 5 days on VOGEL's liquid medium with wheat bran, the optimal pH and temperature for xylanase production were 6.5 and 30 degrees C, respectively. Optimal conditions for the xylanolytic activity assay were at pH 6.0 and 55 degrees C. The half-life at 60 degrees C of the crude enzyme was 6.5 and 21 minutes, in the absence or presence of substrate, respectively.Xylan is the main hemicellulosic component of plant biomass being present in appreciable quantities in agricultural and several agroindustrial wastes. From the products of xylan enzymatic hydrolysis it is possible to obtain cell protein, fuels and other chemicals. Xylanases combined with cellulase could have applications in food processing. Cellulase-free xylanases can be also utilized for preparation of cellulose pulps and liberation of textile fibres (WOODWARD 1984; BIELY 1985, WONG et al. 1988). In view of the potential applications of xylanases, a study of these enzymes from various sources and their multiplicity is desirable.Among xylanolytic microorganisms, filamentous fungi have been more extensively studied and the genus Aspergillus has been shown to be an efficient producer of xylanases. Preliminary observations from our laboratory have demonstrated that a strain of Aspergillus versicolor, isolated from Brazilian soil, produced high xylanase and low cellulase levels, which is an interesting characteristic for some industrial applications. In this report we describe the production and some properties of xylanase obtained from this fungus.

Production of xylanolytic enzymes by Penicillium janczewskii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

d(-)-Lactic Acid Production by Leuconostoc mesenteroides B512 Using Different Carbon and Nitrogen Sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cassava wastewater as a substrate for the simultaneous production of rhamnolipids and polyhydroxyalkanoates by Pseudomonas aeruginosa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Primary production of Utricularia foliosa L., Egeria densa Planchon and Cabomba furcata Schult & Schult.f from rivers of the coastal plain of the State of São Paulo, Brazil

Seasonal variation in gross primary production (GPP) of Utricularia foliosa Linnaeus, Egeria densa Planchon and Cabomba furcata Schult & Schult.f. in rivers of the coastal plain of the state of São Paulo, Brazil was examined in relation to water physico-chemistry. These three species do not affect the multiple uses of the streams and are present throughout the year. The most productive was U. foliosa (maximum production 24.7 mgO(2) g(-1) DW h(-1)), while C. furcata had an intermediate GPP (maximum production 17.5 mgO(2) g(-1) DW h(-1)) and E. densa was lowest at 5.6 mgO(2) g(-1) DW h(-1). Despite the low amplitude of seasonal variation in this south tropical area, the three species showed seasonal variation in the primary production: GPP was positively correlated with photosynthetic active radiation for U. foliosa and E. densa, and there was a negative correlation for C. furcata. For U. foliosa, GPP was positively correlated with temperature and dissolved inorganic carbon and the GPP of C. jurcata was positively correlated with dissolved inorganic carbon.