Value Chain Dynamics and Growth of Local Firms:The Case of Motorcycle Industry in Vietnam

Vietnam’s burgeoning market for motorcycles has attracted global industry eaders,players from developing countries, and local firms. This has led to a dynamic evolution of value chains. This paper presents an explanation of the varieties of the growth patterns xperienced by the local suppliers, focusing on the roles of customer and local supplier strategies. Case studies showed that while the role of customers may be important, strategies of suppliers to improve the ompetitive edge in the production of otorcycle components and to diversify into other products account for important ariations of growth trajectories among local suppliers. Findings presented in this paper suggest the need to direct more attention to strategy that local firms use to boost their competitive edge in business.

Analysis and optimization of propagation losses in LiNbO3 optical waveguides produced by swift heavy-ion irradiation

The propagation losses (PL) of lithium niobate optical planar waveguides fabricated by swift heavy-ion irradiation (SHI), an alternative to conventional ion implantation, have been investigated and optimized. For waveguide fabrication, congruently melting LiNbO3 substrates were irradiated with F ions at 20 MeV or 30 MeV and fluences in the range 1013–1014 cm−2. The influence of the temperature and time of post-irradiation annealing treatments has been systematically studied. Optimum propagation losses lower than 0.5 dB/cm have been obtained for both TE and TM modes, after a two-stage annealing treatment at 350 and 375∘C. Possible loss mechanisms are discussed.

Multiple avirulence paralogues in cereal powdery mildew fungi may contribute to parasite fitness and defeat of plant resistance

Powdery mildews, obligate biotrophic fungal parasites on a wide range of important crops, can be controlled by plant resistance (R) genes, but these are rapidly overcome by parasite mutants evading recognition. It is unknown how this rapid evolution occurs without apparent loss of parasite fitness. R proteins recognize avirulence (AVR) molecules from parasites in a gene-for-gene manner and trigger defense responses. We identify AVRa10 and AVRk1 of barley powdery mildew fungus, Blumeria graminis f sp hordei (Bgh), and show that they induce both cell death and naccessibility when transiently expressed in Mla10 and Mlk1 barley (Hordeum vulgare) varieties, respectively. In contrast with other reported fungal AVR genes, AVRa10 and AVRk1 encode proteins that lack secretion signal peptides and enhance infection success on susceptible host plant cells. AVRa10 and AVRk1 belong to a large family with mayor que30 paralogues in the genome of Bgh, and homologous sequences are present in other formae speciales of the fungus infecting other grasses. Our findings imply that the mildew fungus has a repertoire of AVR genes, which may function as effectors and contribute to parasite virulence. Multiple copies of related but distinct AVR effector paralogues might enable populations of Bgh to rapidly overcome host R genes while maintaining virulence.

Optimisation of a Low-Speed Wind Tunnel. Analysis and Redesign of Corner Vanes.

This paper includes the experimental study, analysis, redesign and subsequent test of the parts of a closed circuit, low speed wind tunnel which are relevant in terms of total pressure loss. The objective is to lower the energy consumption of this system for given conditions in test chamber, so as to reduce the operational costs. In order to achieve this objective, several tasks were performed as the text shows in its different parts. For these tasks, the ETSIAE wind tunnel was used, although the results of this work can be extrapolated to any wind tunnel with the same characteristics. Part II presents a theoretical previous study of the general running of a closed circuit, low speed wind tunnel, as well as the followed procedure to conduct experimental tests for obtaining the total pressure loss in its parts. Results from these tests and their analysis are included in this part. In part III, the analysis of the influence of corner 1 on the pressure loss takes place. As it is said in this part, corner 1 has great importance in the total pressure loss of the wind tunnel. Therefore, it is the first part that should be modified in order to improve the performances of the wind tunnel. During part IV, an optimised guide vane is designed in order to reduce the pressure loss in corner 1 of the wind tunnel. Software MISES is used to achieve this goal by means of selecting the optimum guide vane. In order to introduce the new guide vane in wind tunnels with affordable costs, the easily constructable criterion is kept during design. For this reason, the guide vane will consist of simple aerodynamic contours. Part V includes some possible improvements for the proposed guide vane, in order to evaluate if there is room for improvement in its design. Finally, part VI includes the tests that were conducted in the wind tunnel with the new guide vane cascade and the analysis of their results, in order to asses whether the proposed design fulfills the requirement of lowering the total pressure loss in the wind tunnel. Part VII gathers the main ideas resulting from the whole work.

Modelling and Control of Stepper Motors for High Accuracy Positioning Systems Used in Radioactive Environments

Hybrid Stepper Motors are widely used in open-loop position applications. They are the choice of actuation for the collimators in the Large Hadron Collider, the largest particle accelerator at CERN. In this case the positioning requirements and the highly radioactive operating environment are unique. The latter forces both the use of long cables to connect the motors to the drives which act as transmission lines and also prevents the use of standard position sensors. However, reliable and precise operation of the collimators is critical for the machine, requiring the prevention of step loss in the motors and maintenance to be foreseen in case of mechanical degradation. In order to make the above possible, an approach is proposed for the application of an Extended Kalman Filter to a sensorless stepper motor drive, when the motor is separated from its drive by long cables. When the long cables and high frequency pulse width modulated control voltage signals are used together, the electrical signals difer greatly between the motor and drive-side of the cable. Since in the considered case only drive-side data is available, it is therefore necessary to estimate the motor-side signals. Modelling the entire cable and motor system in an Extended Kalman Filter is too computationally intensive for standard embedded real-time platforms. It is, in consequence, proposed to divide the problem into an Extended Kalman Filter, based only on the motor model, and separated motor-side signal estimators, the combination of which is less demanding computationally. The efectiveness of this approach is shown in simulation. Then its validity is experimentally demonstrated via implementation in a DSP based drive. A testbench to test its performance when driving an axis of a Large Hadron Collider collimator is presented along with the results achieved. It is shown that the proposed method is capable of achieving position and load torque estimates which allow step loss to be detected and mechanical degradation to be evaluated without the need for physical sensors. These estimation algorithms often require a precise model of the motor, but the standard electrical model used for hybrid stepper motors is limited when currents, which are high enough to produce saturation of the magnetic circuit, are present. New model extensions are proposed in order to have a more precise model of the motor independently of the current level, whilst maintaining a low computational cost. It is shown that a significant improvement in the model It is achieved with these extensions, and their computational performance is compared to study the cost of model improvement versus computation cost. The applicability of the proposed model extensions is demonstrated via their use in an Extended Kalman Filter running in real-time for closed-loop current control and mechanical state estimation. An additional problem arises from the use of stepper motors. The mechanics of the collimators can wear due to the abrupt motion and torque profiles that are applied by them when used in the standard way, i.e. stepping in open-loop. Closed-loop position control, more specifically Field Oriented Control, would allow smoother profiles, more respectful to the mechanics, to be applied but requires position feedback. As mentioned already, the use of sensors in radioactive environments is very limited for reliability reasons. Sensorless control is a known option but when the speed is very low or zero, as is the case most of the time for the motors used in the LHC collimator, the loss of observability prevents its use. In order to allow the use of position sensors without reducing the long term reliability of the whole system, the possibility to switch from closed to open loop is proposed and validated, allowing the use of closed-loop control when the position sensors function correctly and open-loop when there is a sensor failure. A different approach to deal with the switched drive working with long cables is also presented. Switched mode stepper motor drives tend to have poor performance or even fail completely when the motor is fed through a long cable due to the high oscillations in the drive-side current. The design of a stepper motor output fillter which solves this problem is thus proposed. A two stage filter, one devoted to dealing with the diferential mode and the other with the common mode, is designed and validated experimentally. With this ?lter the drive performance is greatly improved, achieving a positioning repeatability even better than with the drive working without a long cable, the radiated emissions are reduced and the overvoltages at the motor terminals are eliminated.

Fishing effort control regulations influence on stability, safety and operability of small fishing vessels: study of a series of stability related accidents occurred in Spain between 2004 and 2007

Entre los años 2004 y 2007 se hundieron por problemas de estabilidad cinco pesqueros españoles de pequeña eslora, de características parecidas, de relativamente poca edad, que habían sido construidos en un intervalo de pocos años. La mayoría de los tripulantes de esos pesqueros fallecieron o desaparecieron en esos accidentes. Este conjunto de accidentes tuvo bastante repercusión social y mediática. Entre ingenieros navales y marinos del sector de la pesca se relacionó estos accidentes con los condicionantes a los diseños de los pesqueros impuestos por la normativa de control de esfuerzo pesquero. Los accidentes fueron investigados y publicados sus correspondientes informes; en ellos no se exploró esta supuesta relación. Esta tesis pretende investigar la relación entre esos accidentes y los cambios de la normativa de esfuerzo pesquero. En la introducción se expone la normativa de control de esfuerzo pesquero analizada, se presentan datos sobre la estructura de la flota pesquera en España y su accidentalidad, y se detallan los criterios de estabilidad manejados durante el trabajo, explicando su relación con la seguridad de los pesqueros. Seguidamente se realiza un análisis estadístico de la siniestralidad en el sector de la pesca para establecer si el conjunto de accidentes estudiados supone una anomalía, o si por el contrario el conjunto de estos accidentes no es relevante desde el punto de vista estadístico. Se analiza la siniestralidad a partir de diversas bases de datos de buques pesqueros en España y se concluye que el conjunto de accidentes estudiados supone una anomalía estadística, ya que la probabilidad de ocurrencia de los cinco sucesos es muy baja considerando la frecuencia estimada de pérdidas de buques por estabilidad en el subsector de la flota pesquera en el que se encuadran los cinco buques perdidos. A continuación el trabajo se centra en la comparación de los buques accidentados con los buques pesqueros dados de baja para construir aquellos, según exige la normativa de control de esfuerzo pesquero; a estos últimos buques nos referiremos como “predecesores” de los buques accidentados. Se comparan las dimensiones principales de cada buque y de su predecesor, resultando que los buques accidentados comparten características de diseño comunes que son sensiblemente diferentes en los buques predecesores, y enlazando dichas características de diseño con los requisitos de la nueva normativa de control del esfuerzo pesquero bajo la que se construyeron estos barcos. Ello permite establecer una relación entre los accidentes y el mencionado cambio normativo. A continuación se compara el margen con que se cumplían los criterios reglamentarios de estabilidad entre los buques accidentados y los predecesores, encontrándose que en cuatro de los cinco casos los predecesores cumplían los criterios de estabilidad con mayor holgura que los buques accidentados. Los resultados obtenidos en este punto permiten establecer una relación entre el cambio de normativa de esfuerzo pesquero y la estabilidad de los buques. Los cinco buques accidentados cumplían con los criterios reglamentarios de estabilidad en vigor, lo que cuestiona la relación entre esos criterios y la seguridad. Por ello se extiende la comparativa entre pesqueros a dos nuevos campos relacionados con la estabilidad y la seguridad delos buques: • Movimientos a bordo (operatividad del buque), y • Criterios de estabilidad en condiciones meteorológicas adversas El estudio de la operatividad muestra que los buques accidentados tenían, en general, una mayor operatividad que sus predecesores, contrariamente a lo que sucedía con el cumplimiento de los criterios reglamentarios de estabilidad. Por último, se comprueba el desempeño de los diez buques en dos criterios específicos de estabilidad en caso de mal tiempo: el criterio IMO de viento y balance intenso, y un criterio de estabilidad de nueva generación, incluyendo la contribución original del autor de considerar agua en cubierta. Las tendencias observadas en estas dos comparativas son opuestas, lo que permite cuestionar la validez del último criterio sin un control exhaustivo de los parámetros de su formulación, poniendo de manifiesto la necesidad de más investigaciones sobre ese criterio antes de su adopción para uso regulatorio. El conjunto de estos resultados permite obtener una serie de conclusiones en la comparativa entre ambos conjuntos de buques pesqueros. Si bien los resultados de este trabajo no muestran que la aprobación de la nueva normativa de esfuerzo pesquero haya significado una merma general de seguridad en sectores enteros de la flota pesquera, sí se concluye que permitió que algunos diseños de buques pesqueros, posiblemente en busca de la mayor eficiencia compatible con dicha normativa, quedaran con una estabilidad precaria, poniendo de manifiesto que la relación entre seguridad y criterios de estabilidad no es unívoca, y la necesidad de que éstos evolucionen y se adapten a los nuevos diseños de buques pesqueros para continuar garantizando su seguridad. También se concluye que la estabilidad es un aspecto transversal del diseño de los buques, por lo que cualquier reforma normativa que afecte al diseño de los pesqueros o su forma de operar debería estar sujeta a evaluación por parte de las autoridades responsables de la seguridad marítima con carácter previo a su aprobación. ABSTRACT Between 2004 and 2007 five small Spanish fishing vessels sank in stability related accidents. These vessels had similar characteristics, had relatively short age, and had been built in a period of a few years. Most crewmembers of these five vessels died or disappeared in those accidents. This set of accidents had significant social and media impact. Among naval architects and seamen of the fishing sector these accidents were related to the design constraints imposed by the fishing control effort regulations. The accidents were investigated and the official reports issued; this alleged relationship was not explored. This thesis aims to investigate the relationship between those accidents and changes in fishing effort control regulations. In the introduction, the fishing effort control regulation is exposed, data of the Spanish fishing fleet structure and its accident rates are presented, and stability criteria dealt with in this work are explained, detailing its relationship with fishing vessel safety. A statistical analysis of the accident rates in the fishing sector in Spain is performed afterwards. The objective is determining whether the set of accidents studied constitute an anomaly or, on the contrary, they are not statistically relevant. Fishing vessels accident rates is analyzed from several fishing vessel databases in Spain. It is concluded that the set of studied accidents is statistically relevant, as the probability of occurrence of the five happenings is extremely low, considering the loss rates in the subsector of the Spanish fishing fleet where the studied vessels are fitted within. From this point the thesis focuses in comparing the vessels lost and the vessels that were decommissioned to build them as required by the fishing effort control regulation; these vessels will be referred to as “predecessors” of the sunk vessels. The main dimensions between each lost vessel and her predecessor are compared, leading to the conclusion that the lost vessels share design characteristics which are sensibly different from the predecessors, and linking these design characteristics with the requirements imposed by the new fishing control effort regulations. This allows establishing a relationship between the accidents and this regulation change. Then the margin in fulfilling the regulatory stability criteria among the vessels is compared, resulting, in four of the five cases, that predecessors meet the stability criteria with greater clearance than the sunk vessels. The results obtained at this point would establish a relationship between the change of fishing effort control regulation and the stability of vessels. The five lost vessels complied with the stability criteria in force, so the relation between these criteria and safety is put in question. Consequently, the comparison among vessels is extended to other fields related to safety and stability: • Motions onboard (operability), and • Specific stability criteria in rough weather The operability study shows that the lost vessels had in general greater operability than their predecessors, just the opposite as when comparing stability criteria. Finally, performance under specific rough weather stability criteria is checked. The criteria studied are the IMO Weather Criterion, and one of the 2nd generation stability criteria under development by IMO considering in this last case the presence of water on deck, which is an original contribution by the author. The observed trends in these two cases are opposite, allowing to put into question the last criterion validity without an exhaustive control of its formulation parameters; indicating that further research might be necessary before using it for regulatory purposes. The analysis of this set of results leads to some conclusions when comparing both groups of fishing vessels. While the results obtained are not conclusive in the sense that the entry into force of a new fishing effort control in 1998 caused a generalized safety reduction in whole sectors of the Spanish fishing fleet, it can be concluded that it opened the door for some vessel designs resulting with precarious stability. This evidences that the relation between safety and stability criteria is not univocal, so stability criteria needs to evolve for adapting to new fishing vessels designs so their safety is still guaranteed. It is also concluded that stability is a transversal aspect to ship design and operability, implying that any legislative reform affecting ship design or operating modes should be subjected to assessing by the authorities responsible for marine safety before being adopted.

Social companies as an innovative and sustainable way of solving social problems. A case study from Spain.

In the current context of economic crisis, there is an increasing need for new approaches for solving social problems without relying upon public resources. With this regard, social entrepreneurship has been arising as an important solution to develop social innovations and address social needs. Social entrepreneurs found new ventures that aim at solving social problems. The main purpose of this research is to identify the general profile of the social entrepreneurs and the main features of social companies, such as geographic scope, profit or non-profit approach, collaborative networks, decision making structure, and typologies of customers that benefit from their social actions.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.

Masking and unmasking of the sialic acid-binding lectin activity of CD22 (Siglec-2) on B lymphocytes

CD22 is a B cell-restricted glycoprotein involved in signal transduction and modulation of cellular activation. It is also an I-type lectin (now designated Siglec-2), whose extracellular domain can specifically recognize α2–6-linked sialic acid (Sia) residues. This activity is postulated to mediate intercellular adhesion and/or to act as a coreceptor in antigen-induced B cell activation. However, studies with recombinant CD22 indicate that the lectin function can be inactivated by expression of α2–6-linked Sia residues on the same cell surface. To explore whether this masking phenomenon affects native CD22 on B cells, we first developed a probe to detect the lectin activity of recombinant CD22 expressed on Chinese hamster ovary cells (which have no endogenous α2–6-linked Sia residues). This probe is inactive against CD22-positive B lymphoma cells and Epstein–Barr virus-transformed lymphoblasts which express high levels of α2–6-linked Sia residues. Enzymatic desialylation unmasks the CD22 lectin activity, indicating that endogenous Sia residues block the CD22 lectin-binding site. Truncation of the side chains of cell surface Sia residues by mild periodate oxidation (known to abrogate Sia recognition by CD22) also had this unmasking effect, indicating that the effects of desialylation are not due to a loss of negative charge. Normal resting B cells from human peripheral blood gave similar findings. However, the lectin is partially unmasked during in vitro activation of these cells. Thus, the lectin activity of CD22 is restricted by endogenous sialylation in resting B cells and may be transiently unmasked during in vivo activation, perhaps to modulate intercellular or intracellular interactions at this critical stage in the humoral response.