The Predation of Artemia Nauplii by the Larvae of the Amazon River Prawn, Macrobrachium amazonicum (Heller, 1862), is Affected by Prey Density, Time of Day, and Ontogenetic Development

The present study analyzed the effects of prey density, the time of day, and ontogenetic development on the predation of Artemia nauplii by the larvae of the Amazon river prawn, Macrobrachium amazonicum, as well as possible synergy among these factors. Larvae were raised in 120-L tanks with biological filter systems, and fed on recently hatched Artemia nauplii, using two feeding management protocols: (a) fed once per day at 2000 h (high density HD) and (b) half of the ration provided at 2000 h, complemented at 0800 h the following day by a replacement of the nauplii consumed up to a maximum of the full ration (low density with replacement LDWR). Each treatment consisted of six replicates. The consumption of nauplii was estimated prior to the feeding times. Consumption varied according to time of day, ontogenetic development, and feeding protocol. The larvae ingested more nauplii during the daytime at most developmental stages. Ingestion rates were similar during the day under both treatments, but at night the higher density of prey in the HD treatment caused a higher encounter rate and increased ingestion of nauplii by the larvae. Among the performance indicators only survival was greater in HD in comparison with LDWR; productivity and dry weight were similar. The results indicate a circadian trophic rhythm in M. amazonicum, with the encounter rate being an important mechanism for the capture of prey during the night. A second mechanism probably the visual system aids the perception of prey during the daytime. Based on these results, we suggest that feeding captive Amazon river prawn larvae only once a day would be appropriate and economically beneficial. Further work is necessary to determine the most effective time that this single feed should be applied.

Changes in the rates of weight and waist circumference gain in Australian adults over time: a longitudinal cohort study

OBJECTIVE: To assess in a single cohort whether annual weight and waist circumference (WC) change has varied over time.

DESIGN: Longitudinal cohort study with three surveys (1) 1999/2000; (2) 2004/2005 and (3) 2011/2012. Generalised linear mixed models with random effects were used to compare annualised weight and WC change between surveys 1 and 2 (period 1) with that between surveys 2 and 3 (period 2). Models were adjusted for age to analyse changes with time rather than age. Models were additionally adjusted for sex, education status, area-level socioeconomic disadvantage, ethnicity, body mass index, diabetes status and smoking status.

SETTING: The Australian Diabetes, Obesity and Lifestyle study (AusDiab)-a population-based, stratified-cluster survey of 11247 adults aged ≥25 years. PARTICIPANTS: 3351 Australian adults who attended each of three surveys and had complete measures of weight, WC and covariates.

PRIMARY OUTCOME MEASURES: Weight and WC were measured at each survey. Change in weight and WC was annualised for comparison between the two periods.

RESULTS: Mean weight and WC increased in both periods (0.34 kg/year, 0.43 cm/year period 1; 0.13 kg/year, 0.46 cm/year period 2). Annualised weight gain in period 2 was 0.11 kg/year (95% CI 0.06 to 0.15) less than period 1. Lesser annual weight gain between the two periods was not seen for those with greatest area-level socioeconomic disadvantage, or in men over the age of 55. In contrast, the annualised WC increase in period 2 was greater than period 1 (0.07 cm/year, 95% CI 0.01 to 0.12). The increase was greatest in men aged 55+ years and those with a greater area-level socioeconomic disadvantage.

CONCLUSIONS: Between 2004/2005 and 2011/2012, Australian adults in a national study continued to gain weight, but more slowly than 1999/2000-2004/2005. While weight gain may be slowing, this was not observed for older men or those in more disadvantaged groups, and the same cannot be said for WC.

Presleep activities and time of sleep onset in children

OBJECTIVE: Presleep activities have been implicated in the declining sleep duration of young people. A use-of-time approach may be used to describe the presleep period. The study aims were to describe the activities undertaken 90 minutes before sleep onset and to examine the association between activities and time of sleep onset in New Zealand young people. METHODS: Participants (N = 2017; 5-18 years) self-reported their time use as part of a national survey. All activities reported in the 90 minutes before sleep were extracted. The top 20 activities were grouped into 3 behavioral sets: screen sedentary time, nonscreen sedentary time, and self-care. An adjusted regression model was used to estimate presleep time spent in each behavioral set for 4 distinct categories of sleep onset (very early, early, late, or very late), and the differences between sleep onset categories were tested. RESULTS: In the entire sample, television watching was the most commonly reported activity, and screen sedentary time accounted for ∼30 minutes of the 90-minute presleep period. Participants with a later sleep onset had significantly greater engagement in screen time than those with an earlier sleep onset. Conversely, those with an earlier sleep onset spent significantly greater time in nonscreen sedentary activities and self-care. CONCLUSIONS: Screen sedentary time dominated the presleep period in this sample and was associated with a later sleep onset. The development of interventions to reduce screen-based behaviors in the presleep period may promote earlier sleep onset and ultimately improved sleep duration in young people.

Measurement and data transmission validity of a multi-biosensor system for real-time remote exercise monitoring among cardiac patients

Background: Remote telemonitoring holds great potential to augment management of patients with coronary heart disease (CHD) and atrial fibrillation (AF) by enabling regular physiological monitoring during physical activity. Remote physiological monitoring may improve home and community exercise-based cardiac rehabilitation (exCR) programs and could improve assessment of the impact and management of pharmacological interventions for heart rate control in individuals with AF.

Objective: Our aim was to evaluate the measurement validity and data transmission reliability of a remote telemonitoring system comprising a wireless multi-parameter physiological sensor, custom mobile app, and middleware platform, among individuals in sinus rhythm and AF.

Methods: Participants in sinus rhythm and with AF undertook simulated daily activities, low, moderate, and/or high intensity exercise. Remote monitoring system heart rate and respiratory rate were compared to reference measures (12-lead ECG and indirect calorimeter). Wireless data transmission loss was calculated between the sensor, mobile app, and remote Internet server.

Results: Median heart rate (-0.30 to 1.10 b∙min-1) and respiratory rate (-1.25 to 0.39 br∙min-1) measurement biases were small, yet statistically significant (all P≤.003) due to the large number of observations. Measurement reliability was generally excellent (rho=.87-.97, all P<.001; intraclass correlation coefficient [ICC]=.94-.98, all P<.001; coefficient of variation [CV]=2.24-7.94%), although respiratory rate measurement reliability was poor among AF participants (rho=.43, P<.001; ICC=.55, P<.001; CV=16.61%). Data loss was minimal (<5%) when all system components were active; however, instability of the network hosting the remote data capture server resulted in data loss at the remote Internet server during some trials.

Conclusions: System validity was sufficient for remote monitoring of heart and respiratory rates across a range of exercise intensities. Remote exercise monitoring has potential to augment current exCR and heart rate control management approaches by enabling the provision of individually tailored care to individuals outside traditional clinical environments.

Multimodal iron oxide (Fe₃O₄)-saturated lactoferrin nanocapsules as nanotheranostics for real-time imaging and breast cancer therapy of claudin-low, triple-negative (ER-/PR-/HER2-)

AIM: To unravel the multimodal nanotheranostic ability of Fe3O4-saturated bovine lactoferrin nanocapsules (FebLf NCs) in claudin-low, triple-negative breast cancer model. MATERIALS & METHODS: Xenograft study was performed to examine biocompatibility, antitumor efficacy and multimodal nanotheranostic action in combination with near-infrared live mice imaging. RESULTS: FebLf NCs exhibited a size range of 80 nm ± 5 nm with observed superparamagnetism. FebLf NCs successfully internalized into breast cancer cells through receptor-mediated endocytosis and induced apoptosis through the downregulation of inhibitor of apoptosis survivin and livin proteins. Investigations revealed a remarkable biocompatibility, anticancer efficacy of the FebLf NCs. Near-infrared imaging observations confirmed selective localization of multimodal FebLf NCs at the tumor site and lead to time-dependent reduction of tumor growth. CONCLUSION: FebLf NCs can be safe, biocompatible nanotheranostic approach for real-time imaging and monitoring the effect of drugs in real time and have potentials in future clinical trials.

Exploration of Ground Penetrating Radar and Time Domain Reflectometry Methods for the Determination of Pavement Dielectric Constant

Traditionally, densities of newly built roadways are checked by direct sampling (cores) or by nuclear density gauge measurements. For roadway engineers, density of asphalt pavement surfaces is essential to determine pavement quality. Unfortunately, field measurements of density by direct sampling or by nuclear measurement are slow processes. Therefore, I have explored the use of rapidly-deployed ground penetrating radar (GPR) as an alternative means of determining pavement quality. The dielectric constant of pavement surface may be a substructure parameter that correlates with pavement density, and can be used as a proxy when density of asphalt is not known from nuclear or destructive methods. The dielectric constant of the asphalt can be determined using ground penetrating radar (GPR). In order to use GPR for evaluation of road surface quality, the relationship between dielectric constants of asphalt and their densities must be established. Field measurements of GPR were taken at four highway sites in Houghton and Keweenaw Counties, Michigan, where density values were also obtained using nuclear methods in the field. Laboratory studies involved asphalt samples taken from the field sites and samples created in the laboratory. These were tested in various ways, including, density, thickness, and time domain reflectometry (TDR). In the field, GPR data was acquired using a 1000 MHz air-launched unit and a ground-coupled unit at 200 and 500 MHz. The equipment used was owned and operated by the Michigan Department of Transportation (MDOT) and available for this study for a total of four days during summer 2005 and spring 2006. The analysis of the reflected waveforms included “routine” processing for velocity using commercial software and direct evaluation of reflection coefficients to determine a dielectric constant. The dielectric constants computed from velocities do not agree well with those obtained from reflection coefficients. Perhaps due to the limited range of asphalt types studied, no correlation between density and dielectric constant was evident. Laboratory measurements were taken with samples removed from the field and samples created for this study. Samples from the field were studied using TDR, in order to obtain dielectric constant directly, and these correlated well with the estimates made from reflection coefficients. Samples created in the laboratory were measured using 1000 MHz air-launched GPR, and 400 MHz ground-coupled GPR, each under both wet and dry conditions. On the basis of these observations, I conclude that dielectric constant of asphalt can be reliably measured from waveform amplitude analysis of GJPR data, based on the consistent agreement with that obtained in the laboratory using TDR. Because of the uniformity of asphalts studied here, any correlation between dielectric constant and density is not yet apparent.

Kinetic analysis of metal uptake by dry and gel alginate particles

The kinetics of metal uptake by gel and dry calcium alginate beads was analysed using solutions of copper or lead ions. Gel beads sorbed metal ions faster than the dry ones and larger diffusivities of metal ions were calculated for gel beads: approximately 10−4 cm2/min vs. 10−6 cm2/min for dry beads. In accordance, scanning electron microscopy and nitrogen adsorption data revealed a low porosity of dry alginate particles. However, dry beads showed higher sorption capacities and a mechanical stability more suitable for large-scale use. Two sorption models were fitted to the kinetic results: the Lagergren pseudo-first order and the Ho and McKay pseudo-second order equations. The former was found to be the most adequate to model metal uptake by dry alginate beads and kinetic constants in the orders of 10−3 and 10−2 min−1 were obtained for lead solutions with concentrations up to 100 g/m3. The pseudo-first order model was also found to be valid to describe biosorbent operation with a real wastewater indicating that it can be used to design processes of metal sorption with alginate-based materials.

Determination of subclinical metabolic disorders in transition dairy cows

Das Gesundheitsmanagement von Milchkühen hat in den vergangenen Jahren auf den landwirtschaftlichen Betrieben an Bedeutung gewonnen. Neben Präventionsmaßnahmen zur Gesunderhaltung der Tiere ist die frühzeitige und systematische Erkennung von Erkrankungen hierbei der Hauptbestandteil. Es zeigt sich vermehrt, dass vor allem Transitkühe verstärkt an Stoffwechselerkrankungen in sowohl klinischer als auch subklinischer Form erkranken. Letztere stellen ein hohes Risiko dar, zum einen weil subklinische Erkrankungen oftmals nur schwer oder gar nicht erkannt werden und zum anderen, weil sie in vielen Fällen die Grundlage für meist schwerwiegendere Folgeerkrankungen sind. In der vorliegenden Studie wird das Thema der Früherkennung von subklinischen Ketosen und der subakuten Pansenazidose behandelt. Verschiedene Methoden wurden unter praktischen Versuchsbedingungen auf ihre Tauglichkeit zur Krankheitserkennung hin geprüft. In einer ersten Studie wurde auf einem konventionellen Milchviehbetrieb ein Ketose-Monitoring bei frischlaktierenden Kühen ab Tag 3 postpartum durchgeführt. Insgesamt 15 Tiere waren an einer subklinischen Ketose erkrankt, was eine Aufkommensrate von 26% in den untersuchten Tieren bedeutete. Die Blutproben von insgesamt 24 Tieren wurden auf ihren IL-6-Gehalt untersucht. Von den untersuchten Tieren waren 14 Tiere erkrankt, 10 Tiere bildeten die gesunde Kontrollgruppe. Interleukin-6 wurde bestimmt, da dem Zytokin IL-6 in anderen Studien in Bezug auf Ketosen eine Rolle zugesprochen wurde. Die erwartete Erhöhung von IL-6 bei erkrankten Tieren konnte nicht festgestellt werden; die erkrankten Kühe zeigten vielmehr die niedrigsten IL-6 Werte der Studiengruppe. Insgesamt waren die IL-6 Konzentrationen auf einem niedrigen Niveau mit 27.2 pg/m l± 10.2. Es zeigte sich, dass die IL-6 Bestimmung im Blut hinsichtlich der Erkennung von subklinischen Ketosen nur eingeschränkt nutzbar ist. Es konnte ausschließlich eine schwache negative Korrelation zwischen Beta- Hydroxybutyrat (BHBA, Goldstandard für den Nachweis einer Ketose) und IL-6 detektiert werden. Zusätzlich zu den Blutanalysen wurde ebenfalls die tägliche Wiederkauaktivität mit dem „DairyCheck“ System bestimmt, welches kontinuierlich die charakteristischen Kaumuskelkontraktionen aufzeichnet und somit die Dauer des Wiederkäuens bestimmt werden kann. Es wurde geprüft, ob sich ketotische Tiere von nicht ketotischen Tieren hinsichtlich der täglichen Wiederkäuzeit unterscheiden. Milchkühe mit einer Ketose kauten im Schnitt 475 min/d ± 56 wieder, nach Genesung 497 min/d ± 48. Sie befanden sich somit im Durchschnitt immer unterhalb der gesunden Kontrollgruppe, welche 521 min/d ± 76 wiederkaute. Eine Korrelation zwischen der Wiederkauzeit und dem BHBA- Gehalt im Blut war nur sehr schwach ausgeprägt, nicht zuletzt da die Tiere generell eine hohe Variabilität in der Wiederkauaktivität zeigten. Bei einer weiteren Studie, ebenfalls auf einem Praxisbetrieb durchgeführt, wurde auf die Erkennung der subakuten Pansensazidose (SARA) fokussiert. Hierbei kam ein drahtloses, kommerziell verfügbares Bolussystem zum Einsatz, welches den pH Wert kontinuierlich im Retikulorumen misst. Es macht die Erkennung einer SARA auch unter Praxisbedingungen ohne invasive Methoden wie der Punktion möglich. Das Bolussystem wurde 24 Milchkühen kurz vor der Abkalbung oral eingegeben, um den pH-Wert während der gesamten Transitphase messen und überwachen zu können. Während in der Trockenstehphase nur vereinzelte SARA Fälle auftraten, erlitt ein Großteil der untersuchten Tiere in der Frühlaktation eine SARA. Auf Grundlage von pH-Werten von laktierenden Milchkühen, wurde zusätzlich eine Sensitivitätsanalyse von verschieden, bereits eingesetzten Nachweismethoden durchgeführt, um die Tauglichkeit für die SARA-Diagnostik zu untersuchen. Es handelte sich hierbei zum einen um einen SARA-Nachweis unter Heranziehung von Einzelwerten, Fress- und Wiederkäuzeiten, sowie ausgewählten Milchinhaltsstoffen und der Milchmenge. Die Analyse ergab, dass nahezu alle Nachweismethoden im Vergleich zur Langzeitmessung nur eingeschränkt zur SARA-Diagnostik nutzbar sind. In einem weiteren Teil der Studie wurde eine Kotfraktionierung bei den gleichen Tieren durchgeführt, um damit SARA-Tiere auch mittels der Kotanalyse erkennen kann. Es konnte gezeigt werden, dass zum einen die Ration einen Einfluss auf die Kotzusammensetzung hat (Trockensteherration versus Ration für Laktierende) zum anderen aber auch, dass eine SARA die Zusammensetzung des Kotes verändert. Hierfür wurden Kotproben ausschließlich von laktierenden Kühen untersucht, sodass der Einfluss der Ration ausgeschlossen werden konnte. Erhöhte Faseranteile im Kot von SARA - Kühen gaben Hinweis auf eine verminderte Verdaulichkeit. Dabei erwies sich vor allem die Hemizellulose als guter Parameter, um auf eine SARA schließen zu können. Die Versuchsbedingungen ließen es ebenfalls zu, die pH-Verläufe der Tiere in der Frühlaktation zu untersuchen. Eine Clusteranalyse von pH-Werten der ersten 12 Tage postpartum zeigte, dass die untersuchten Tiere trotz gleicher Haltungs- und Fütterungsbedingungen unterschiedliche pH-Wert Verläufe entwickelten. So gab es eine Gruppe von Milchkühen, die den pH-Wert stabil halten konnte, während die restlichen pH-Abfälle in verschiedenen Verläufen und Intensitäten aufzeigten. Es konnte ebenfalls aufgezeigt werden, dass Tiere innerhalb der Testherde unterschiedliche Schweregrade der SARA entwickelten. Auch in dieser Studie wurde deutlich, dass Tiere scheinbar unterschiedliche Möglichkeiten haben, auf ihre Umwelt zu reagieren, bzw. suboptimalen Bedingungen entgegenwirken zu können. Zusammengefasst wurden verschiedene Methoden zur Ketose- und SARA- Erkennung geprüft, von denen nur einzelne für die Praxis zu empfehlen sind. Die Variabilität der Tiere, sowohl bei der Ausprägung der Erkrankungen als auch bei den gemessenen Parametern verdeutlicht die Notwendigkeit, diese im Herden- und Gesundheitsmanagement in Zukunft stärker zu berücksichtigen.

Indoor exposure to submicrometer particles and PM2.5 in residential houses in Brisbane, Australia

As part of a large study investigating indoor air in residential houses in Brisbane, Australia, the purpose of this work was to quantify indoor exposure to submicrometer particles and PM2.5 for the inhabitants of 14 houses. Particle concentrations were measured simultaneously for more than 48 hours in the kitchens of all the houses by using a condensation particle counter (CPC) and a photometer (DustTrak). The occupants of the houses were asked to fill in a diary, noting the time and duration of any activity occurring throughout the house during measurement, as well as their presence or absence from home. From the time series concentration data and the information about indoor activities, exposure to the inhabitants of the houses was calculated for the entire time they spent at home as well as during indoor activities resulting in particle generation. The results show that the highest median concentration level occurred during cooking periods for both particle number concentration (47.5´103 particles cm-3) and PM2.5 concentration (13.4 mg m-3). The highest residential exposure period was the sleeping period for both particle number exposure (31%) and PM2.5 exposure (45.6%). The percentage of the average residential particle exposure level in total 24h particle exposure level was approximating 70% for both particle number and PM2.5 exposure.

Electronic tendering: an industry perspective

The construction industry is categorised as being an information-intensive industry and described as one of the most important industries in any developed country, facing a period of rapid and unparalleled change (Industry Science Resources 1999) (Love P.E.D., Tucker S.N. et al. 1996). Project communications are becoming increasingly complex, with a growing need and fundamental drive to collaborate electronically at project level and beyond (Olesen K. and Myers M.D. 1999; Thorpe T. and Mead S. 2001; CITE 2003). Yet, the industry is also identified as having a considerable lack of knowledge and awareness about innovative information and communication technology (ICT) and web-based communication processes, systems and solutions which may prove beneficial in the procurement, delivery and life cycle of projects (NSW Government 1998; Kajewski S. and Weippert A. 2000). The Internet has debatably revolutionised the way in which information is stored, exchanged and viewed, opening new avenues for business, which only a decade ago were deemed almost inconceivable (DCITA 1998; IIB 2002). In an attempt to put these ‘new avenues of business’ into perspective, this report provides an overall ‘snapshot’ of current public and private construction industry sector opportunities and practices in the implementation and application of web-based ICT tools, systems and processes (e-Uptake). Research found that even with a reserved uptake, the construction industry and its participating organisations are making concerted efforts (fortunately with positive results) in taking up innovative forms of doing business via the internet, including e-Tendering (making it possible to manage the entire tender letting process electronically and online) (Anumba C.J. and Ruikar K. 2002; ITCBP 2003). Furthermore, Government (often a key client within the construction industry),and with its increased tendency to transact its business electronically, undoubtedly has an effect on how various private industry consultants, contractors, suppliers, etc. do business (Murray M. 2003) – by offering a wide range of (current and anticipated) e-facilities / services, including e-Tendering (Ecommerce 2002). Overall, doing business electronically is found to have a profound impact on the way today’s construction businesses operate - streamlining existing processes, with the growth in innovative tools, such as e-Tender, offering the construction industry new responsibilities and opportunities for all parties involved (ITCBP 2003). It is therefore important that these opportunities should be accessible to as many construction industry businesses as possible (The Construction Confederation 2001). Historically, there is a considerable exchange of information between various parties during a tendering process, where accuracy and efficiency of documentation is critical. Traditionally this process is either paper-based (involving large volumes of supporting tender documentation), or via a number of stand-alone, non-compatible computer systems, usually costly to both the client and contractor. As such, having a standard electronic exchange format that allows all parties involved in an electronic tender process to access one system only via the Internet, saves both time and money, eliminates transcription errors and increases speed of bid analysis (The Construction Confederation 2001). Supporting this research project’s aims and objectives, researchers set to determine today’s construction industry ‘current state-of-play’ in relation to e-Tendering opportunities. The report also provides brief introductions to several Australian and International e-Tender systems identified during this investigation. e-Tendering, in its simplest form, is described as the electronic publishing, communicating, accessing, receiving and submitting of all tender related information and documentation via the internet, thereby replacing the traditional paper-based tender processes, and achieving a more efficient and effective business process for all parties involved (NT Governement 2000; NT Government 2000; NSW Department of Commerce 2003; NSW Government 2003). Although most of the e-Tender websites investigated at the time, maintain their tendering processes and capabilities are ‘electronic’, research shows these ‘eTendering’ systems vary from being reasonably advanced to more ‘basic’ electronic tender notification and archiving services for various industry sectors. Research also indicates an e-Tender system should have a number of basic features and capabilities, including: • All tender documentation to be distributed via a secure web-based tender system – thereby avoiding the need for collating paperwork and couriers. • The client/purchaser should be able to upload a notice and/or invitation to tender onto the system. • Notification is sent out electronically (usually via email) for suppliers to download the information and return their responses electronically (online). • During the tender period, updates and queries are exchanged through the same e-Tender system. • The client/purchaser should only be able to access the tenders after the deadline has passed. • All tender related information is held in a central database, which should be easily searchable and fully audited, with all activities recorded. • It is essential that tender documents are not read or submitted by unauthorised parties. • Users of the e-Tender system are to be properly identified and registered via controlled access. In simple terms, security has to be as good as if not better than a manual tender process. Data is to be encrypted and users authenticated by means such as digital signatures, electronic certificates or smartcards. • All parties must be assured that no 'undetected' alterations can be made to any tender. • The tenderer should be able to amend the bid right up to the deadline – whilst the client/purchaser cannot obtain access until the submission deadline has passed. • The e-Tender system may also include features such as a database of service providers with spreadsheet-based pricing schedules, which can make it easier for a potential tenderer to electronically prepare and analyse a tender. Research indicates the efficiency of an e-Tender process is well supported internationally, with a significant number, yet similar, e-Tender benefits identified during this investigation. Both construction industry and Government participants generally agree that the implementation of an automated e-Tendering process or system enhances the overall quality, timeliness and cost-effectiveness of a tender process, and provides a more streamlined method of receiving, managing, and submitting tender documents than the traditional paper-based process. On the other hand, whilst there are undoubtedly many more barriers challenging the successful implementation and adoption of an e-Tendering system or process, researchers have also identified a range of challenges and perceptions that seem to hinder the uptake of this innovative approach to tendering electronically. A central concern seems to be that of security - when industry organisations have to use the Internet for electronic information transfer. As a result, when it comes to e-Tendering, industry participants insist these innovative tendering systems are developed to ensure the utmost security and integrity. Finally, if Australian organisations continue to explore the competitive ‘dynamics’ of the construction industry, without realising the current and future, trends and benefits of adopting innovative processes, such as e-Tendering, it will limit their globalising opportunities to expand into overseas markets and allow the continuation of international firms successfully entering local markets. As such, researchers believe increased knowledge, awareness and successful implementation of innovative systems and processes raises great expectations regarding their contribution towards ‘stimulating’ the globalisation of electronic procurement activities, and improving overall business and project performances throughout the construction industry sectors and overall marketplace (NSW Government 2002; Harty C. 2003; Murray M. 2003; Pietroforte R. 2003). Achieving the successful integration of an innovative e-Tender solution with an existing / traditional process can be a complex, and if not done correctly, could lead to failure (Bourn J. 2002).

A longitudinal study comparing bereavement phenomena in recently bereaved spouses, adult children and parents

Objective: The study investigated previous research findings and clinical impressions which indicated that the intensity of grief for parents who had lost a child was likely to be higher than that for widows/widowers, who in turn were likely to have more intense reactions than adult children losing a parent. Method: In order to compare the intensities of the bereavement reactions among representative community samples of bereaved spouses (n = 44), adult children (n = 40) and parents (n = 36), and to follow the course of such phenomena, a detailed Bereavement Questionnaire was administered at four time points over a 13-month period following the loss. Results: Measures based on items central to the construct of bereavement showed significant time and group differences in accordance with the proposed hypothesis. More global items associated with the construct of resolution showed a significant time effect, but without significant group differences. Conclusions: Evidence from this study supports the hypothesis that in non-clinical, community-based populations the frequency with which core bereavement phenomena are experienced is in the order: bereaved parents bereaved spouses bereaved adult children.

Time series analysis of a Web search engine transaction log

In this paper, we use time series analysis to evaluate predictive scenarios using search engine transactional logs. Our goal is to develop models for the analysis of searchers’ behaviors over time and investigate if time series analysis is a valid method for predicting relationships between searcher actions. Time series analysis is a method often used to understand the underlying characteristics of temporal data in order to make forecasts. In this study, we used a Web search engine transactional log and time series analysis to investigate users’ actions. We conducted our analysis in two phases. In the initial phase, we employed a basic analysis and found that 10% of searchers clicked on sponsored links. However, from 22:00 to 24:00, searchers almost exclusively clicked on the organic links, with almost no clicks on sponsored links. In the second and more extensive phase, we used a one-step prediction time series analysis method along with a transfer function method. The period rarely affects navigational and transactional queries, while rates for transactional queries vary during different periods. Our results show that the average length of a searcher session is approximately 2.9 interactions and that this average is consistent across time periods. Most importantly, our findings shows that searchers who submit the shortest queries (i.e., in number of terms) click on highest ranked results. We discuss implications, including predictive value, and future research.

What about me? Avoiding fatigue and gaining personal time in the work to leisure transition in work-life balance initiatives

Fatigue and overwork are problems experienced by numerous employees in many industry sectors. Focusing on improving work-life balance can frame the ‘problem’ of long work hours to resolve working time duration issues. Flexible work options through re-organising working time arrangements is key to developing an organisational response for delivering work-life balance and usually involves changing the internal structure of work time. This study examines the effect of compressed long weekly working hours and the consequent ‘long break’ on work-life balance. Using Spillover theory and Border theory, this research considers organisational and personal determinants of overwork and fatigue. It concludes compressed long work hours with a long break provide better work-life balance. Further, a long break allows gaining ‘personal time’ and overcoming fatigue.

The nature and extent of policing alcohol related crime and reducing violence in and around late night entertainment areas

The misuse of alcohol is well documented in Australia and has been associated with disorders and harms that often require police attention. The extent of alcohol-related incidents requiring police attention has been recorded as substantial in some Australian cities (Arro, Crook, & Fenton, 1992; Davey & French, 1995; Ireland & Thommeny, 1993). A significant proportion of harmful drinking occurs in and around licensed premises (Jochelson, 1997; Stockwell, Masters, Phillips, Daly, Gahegan, Midford, & Philp, 1998; Borges, Cherpitel, & Rosovsky, 1998) and most of these incidents are not reported to police (Bryant & Williams, 2000; Lister, Hobbs, Hall, & Winlow, 2000). Alcohol-related incidents have also been found to be concentrated in certain places at certain times (Jochelson, 1997) and therefore manipulating the context in which these incidents occur may provide a means to prevent and reduce the harm associated with alcohol misuse. One of the major objectives of the present program of research was to investigate the occurrence and resource impact of alcohol-related incidents on operational (general duties) policing across a large geographical area. A second objective of the thesis was to examine the characteristics and temporal/spatial dynamics of police attended alcohol incidents in the context of Place Based theories of crime. It was envisaged that this approach would reveal the patterns of the most prevalent offences and demonstrate the relevance of Place Based theories of crime to understanding these patterns. In addition, the role of alcohol, time and place were also explored in order to examine the association between non criminal traffic offences and other types of criminal offences. A final objective of the thesis was to examine the impact of a situational crime prevention strategy that had been initiated to reduce the violence and disorder associated with late-night liquor trading premises. The program of research in this doctorate thesis has been undertaken through the presentation of published papers. The research was conducted in three stages which produced six manuscripts, five of which were submitted to peer reviewed journals and one that was published in a peer reviewed conference proceedings. Stage One included two studies (Studies 1 & 2) both of which involved a cross sectional approach to examine the prevalence and characteristics of alcohol-related incidents requiring police attendance across three large geographical areas that included metropolitan cities, provincial regions and rural areas. Stage Two of the program of research also comprised two cross sectional quantitative studies (Studies 3 & 4) that investigated the temporal and spatial dynamics of the major offence categories attended by operational police in a specific Police District (Gold Coast). Stage Three of the program of research involved two studies (Studies 5 & 6) that assessed the effectiveness of a situational crime prevention strategy. The studies employed a pre-post design to assess the impact on crime, disorder and violence by preventing patrons from entering late-night liquor trading premises between 3 a.m. and 5 a.m. (lockout policy). Although Study Five was solely quantitative in nature, Study Six included both quantitative and qualitative aspects. The approach adopted in Study Six, therefore facilitated not only a quantative comparison of the impact of the lockout policy on different policing areas, but also enabled the processes related to the implementation of the lockout policy to be examined. The thesis reports a program of research involving a common data collection method which then involved a series of studies being conducted to explore different aspects of the data. The data was collected from three sources. Firstly a pilot phase was undertaken to provide participants with training. Secondly a main study period was undertaken immediately following the pilot phase. The first and second sources of data were collected between 29th March 2004 and 2nd May 2004. Thirdly, additional data was collected between the 1st April 2005 and 31st May 2005. Participants in the current program of research were first response operational police officers who completed a modified activity log over a 9 week period (4 week pilot phase & 5 week survey study phase), identifying the type, prevalence and characteristics of alcohol-related incidents that were attended. During the study period police officers attended 31,090 alcohol-related incidents. Studies One and Two revealed that a substantial proportion of current police work involves attendance at alcohol-related incidents (i.e., 25% largely involving young males aged between 17 and 24 years). The most common incidents police attended were vehicle and/or traffic matters, disturbances and offences against property. The major category of offences most likely to involve alcohol included vehicle/traffic matters, disturbances and offences against the person (e.g., common & serious assaults). These events were most likely to occur in the late evenings and early hours of the morning on the weekends, and importantly, usually took longer for police to complete than non alcohol-related incidents. The findings in Studies Three and Four suggest that serious traffic offences, disturbances and offences against the person share similar characteristics and occur in concentrated places at similar times. In addition, it was found that time, place and incident type all have an influence on whether an incident attended by a police officer is alcohol-related. Alcohol-related incidents are more likely to occur in particular locations in the late evenings and early mornings on the weekends. In particular, there was a strong association between the occurrence of alcohol-related disturbances and alcohol-related serious traffic offences in regards to place and time. In general, stealing and property offences were not alcohol-related and occurred in daylight hours during weekdays. The results of Studies Five and Six were mixed. A number of alcohol-related offences requiring police attention were significantly reduced for some policing areas and for some types of offences following the implementation of the lockout policy. However, in some locations the lockout policy appeared to have a negative or minimal impact. Interviews with licensees revealed that although all were initially opposed to the lockout policy as they believed it would have a negative impact on business, most perceived some benefits from its introduction. Some of the benefits included, improved patron safety and the development of better business strategies to increase patron numbers. In conclusion, the overall findings of the six studies highlight the pervasive nature of alcohol across a range of criminal incidents, demonstrating the tremendous impact alcohol-related incidents have on police. The findings also demonstrate the importance of time and place in predicting the occurrence of alcohol-related offences. Although this program of research did not set out to test Place Based theories of crime, these theories were used to inform the interpretation of findings. The findings in the current research program provide evidence for the relevance of Place Based theories of crime to understanding the factors contributing to violence and disorder, and designing relevant crime prevention strategies. For instance, the results in Studies Five and Six provide supportive evidence that this novel lockout initiative can be beneficial for public safety by reducing some types of offences in particular areas in and around late-night liquor trading premises. Finally, intelligent-led policing initiatives based on problem oriented policing, such as the lockout policy examined in this thesis, have potential as a major crime prevention technique to reduce specific types of alcohol-related offences.

Youth identities : time, space and social exclusion : exploring youth policy and practice in Sheffield, 1999-2003

The type and quality of youth identities ascribed to young people living in residual housing areas present opportunities for action as well as structural constraints. In this book three ethnographies, based on a youth work practitioner's observations, interviews and participation in local networks, identify young people's resistant identities. Through an analysis of social exclusion, youth policies and interviews with young people, youth workers and their managers, the book outlines a contingent network of relationships that hinder informal learning. Globalisation, individualisation, welfare/education reform and the rise of cultural social movements act upon youth identities and steer youth policies to subordinate the notion of informal group learning. Drawing on Castells' and Touraine's sociological models of identity, the book explores youth as a category of time and residual housing areas as a category of space, as they pertain to local dynamics of social exclusion.