Analysis of pollutants evolved from combustion and pyrolysis of flexible polyurethane foam in a laboratory furnace

Resumen del póster presentado en PIC2015 – the 14th International Congress on Combustion By-Products and Their Health Effects, Umeå, Sweden, 14-17 June 2015.

TABLETUTORIAL: Stata module to provide tutorial on automated table generation and reporting

-tabletutorial- illustrates how Stata can be used to export statistical results and generate customized reports. Part 1 explains how results from Stata routines can be accessed and how they can be exported using the -file- comand or a wrapper such as, e.g., -mat2txt-. Part 2 shows how model estimation results can be archived using -estwrite- and how models can be tabulated and exported to LaTeX, MS Excel, or MS Word using -estout-. Part 3 illustrates how to set up automatic reports in LaTeX or MS Word. The tutorial is based on a talk given at CEPS/INSTEAD in Luxembourg in October 2008. After install, type -help tabletutorial- to start the tutorial (in Stata 8, type -whelp tabletutorial-). The -mat2txt-, -estwrite-, and -estout- packages, also available from SSC, are required to run the examples.

ESTOUT: Stata module to export estimation results from estimates table

estout produces a table of regression results from one or several models for use with spreadsheets, LaTeX, HTML, or a word-processor table. eststo stores a quick copy of the active estimation results for later tabulation. esttab is a wrapper for estout. It displays a pretty looking publication-style regression table without much typing. estadd adds additional results to the e()-returns for one or several models previously fitted and stored. This package subsumes the previously circulated esto, esta, estadd, and estadd_plus. An earlier version of estout is available as estout1.

Synthetic rubber facts.

Cover title.

Compounding indgredients for rubber,

Mode of access: Internet.

Influence apart from Adoption: How Interaction between Programming and Scientific Practices Shapes Modes of Inquiry in Four Oceanography Teams

Thesis (Ph.D.)--University of Washington, 2016-06

Performance of improved guayule lines in Australia

Guayule (Parthenium argentatum Gray) is a potential source of commercial natural rubber. Its commercialisation depends mainly on economical plant production. The objective of this study was to evaluate the performance of improved lines in Australia. Seeds from five improved lines (AZ-1, AZ-2, AZ-3, AZ-5 and AZ-6) and two previously developed guayule lines (N 565 and 11591) were obtained from the Agricultural Research Service (ARS) of the United States Department of Agriculture (USDA). Seedlings from these lines were grown in a glasshouse for 3 months and later transplanted in a field experiment in early September 2001. Plant height and width were monitored from transplanting to 62 weeks at regular intervals. After 62 weeks, plant dry matter production, rubber and resin content, and yields were analysed. Plant height and width of the improved lines were higher than N 565 and 11591. Plant dry matter, rubber and resin yields were significantly different among lines. Of the five lines, AZ-1 and AZ-2 produced rubber yields of 620 and 550 kg/ha, respectively and these yields were significantly greater than for N 565 (371 kg/ha) and 11591 (391 kg/ha). AZ-1 and AZ-2 also produced significantly higher resin yields, 727 and 668 kg/ha, respectively, than those for N 565 (436 kg/ha) and 11591 (325 kg/ha). Rubber and resin yield increase of lines, AZ-1 and AZ-2, were in the range of 41-68% and 53-123%, respectively over N 565 and 11591. AZ-1 tended to produce higher rubber and resin yields than AZ-2 but exhibited highly variable plant height (CV = 25%) and width (CV = 41%) indicating potential for further genetic improvement. AZ-2 offers the best combination of desirable characters including early vigour, uniformity and comparatively higher rubber and resin yields. (C) 2003 Published by Elsevier B.V.

Effect of periodontal treatment on the C-reactive protein and proinflammatory cytokine levels in Japanese periodontitis patients

Background: Recent epidemiological studies have shown that individuals with periodontitis have a significantly increased risk of developing coronary heart disease. In addition to conventional risk factors, chronic infection and subsequent production of systemic inflammatory markers may be associated with this increased risk. Objectives: The aim of the present study was to determine whether the presence of chronic periodontitis and subsequent periodontal treatment could influence the serum levels of C-reactive protein (CRP), interleukin-6 and tumor necrosis factor-alpha (TNF-alpha) in a Japanese population. Methods: Sera were obtained from 24 patients with moderate to advanced periodontitis at the baseline examination and at reassessment after completion of treatment. As a control, sera were also obtained from 21 subjects without periodontitis. High-sensitivity CRP (hs-CRP) was measured using nephelometry with a latex particle-enhanced immunoassay and interleukin-6 and TNF-alpha were determined by sensitive enzyme-linked immunosorbent assay. Results: The levels of hs-CRP and interleukin-6 in the sera of this Japanese population seemed to be much lower than those reported in other populations. TNF-alpha on the other hand, demonstrated similar levels between this Japanese and other populations. Periodontal status demonstrated a significant improvement in all patients following treatment. There was a trend toward higher hs-CRP levels in patients at baseline compared with control subjects. Hs-CRP level tended to decrease with improvement of the periodontal condition following treatment and approached that of control subjects, although this decline was not statistically significant. interleukin-6 and TNF-alpha levels did not change following periodontal treatment. Furthermore, there was no difference in the serum levels of these inflammatory cytokines between patients either at baseline or at reassessment and control subjects. Conclusions: In this pilot study, we were unable to show that periodontal disease significantly affects the serum levels of systemic inflammatory markers. However, this does not necessarily mean that periodontitis does not contribute to the total burden of inflammation as there was a tendency for hs-CRP to decrease following successful periodontal treatment. Large-scale studies are clearly needed to determine the impact of periodontal disease on systemic inflammation.

Scale-up in emulsion polymerisation

The procedure for successful scale-up of batchwise emulsion polymerisation has been studied. The relevant literature on liquid-liquid dispersion on scale-up and on emulsion polymerisation has been crit1cally reviewed. Batchwise emulsion polymerisation of styrene in a specially built 3 litre, unbaffled, reactor confirmed that impeller speed had a direct effect on the latex particle size and on the reaction rate. This was noted to be more significant at low soap concentrations and the phenomenon was related to the depletion of micelle forming soap by soap adsorption onto the monomer emulsion surface. The scale-up procedure necessary to maintain constant monomer emulsion surface area in an unbaffled batch reactor was therefore investigated. Three geometrically similar 'vessels of 152, 229 and 305mm internal diameter, and a range of impeller speeds (190 to 960 r.p.m.) were employed. The droplet sizes were measured either through photomicroscopy or via a Coulter Counter. The power input to the impeller was also measured. A scale-up procedure was proposed based on the governing relationship between droplet diameter, impeller speed and impeller diameter. The relationships between impeller speed soap concentration, latex particle size and reaction rate were investigated in a series of polymerisations employing an amended commercial recipe for polystyrene. The particle size was determined via a light transmission technique. Two computer models, based on the Smith and Ewart approach but taking into account the adsorption/desorption of soap at the monomer surface, were successful 1n predicting the particle size and the progress of the reaction up to the end of stage II, i.e. to the end of the period of constant reaction rate.

The study and characterisation of water-based latices used for can coating interiors

Water-based latices, used in the production of internal liners for beer/beverage cans, were investigated using a number of analytical techniques. The epoxy-graft-acrylic polymers, used to prepare the latices, and films, produced from those latices, were also examined. It was confirmed that acrylic polymer preferentially grafts onto higher molecular weight portions of the epoxy polymer. The amount of epoxy remaining ungrafted was determined to be 80%. This figure is higher than was previously thought. Molecular weight distribution studies were carried out on the epoxy and epoxy-g-acrylic resins. A quantitative method for determining copolymer composition using GPC was evaluated. The GPC method was also used to determine polymer composition as a function of molecular weight. IR spectroscopy was used to determine the total level of acrylic modification of the polymers and NMR was used to determine the level of grafting. Particle size determinations were carried out using transmission electron microscopy and dynamic light scattering. Levels of stabilising amine greatly affected the viscosity of the latex, particle size and amount of soluble polymer but the core particle size, as determined using TEM, was unaffected. NMR spectra of the latices produced spectra only from solvents and amine modifiers. Using solid-state CP/MAS/freezing techniques spectra from the epoxy component could be observed. FT-IR spectra of the latices were obtained after special subtraction of water. The only difference between the spectra of the latices and those of the dry film were due to the presence of the solvents in the former. A distinctive morphology in the films produced from the latices was observed. This suggested that the micelle structure of the latex survives the film forming process. If insufficient acrylic is present, large epoxy domains are produced which gives rise to poor film characteristics. Casting the polymers from organic solutions failed to produce similar morphology.

Acanthamoebal surface properties and the modulation of phagocytosis

The surface nature of Acanthamoeba trophozoites and cysts was investigated with respect to cell surface charge, hydrophobicity and surface carbohydrate composition. Particulate microelectrophoresis revealed a marked negative charge for both morphological forms, though less for cyst surfaces. Hydrophobicity was determined by adhesion to n-hexadecane and indicated a relatively low hydrophobic nature of both forms, though less so for cysts. Surface carbohydrate composition was studied by the use of fluorescent lectins and flow cytometry, using a ligand-receptor approach for further in depth analysis of binding of particular lectins. These studies showed trophozoite and cyst surfaces to be rich in N-acetylglucosamine, N-acteylneuraminic acid, mannose and glucose, with the addition of N-acetylgalactosamine on cysts. The importance of such surface properties was investigated with respect to phagocytosis of polystyrene latex microspheres, of different surface types and size. Investigations into the optimum conditions of uptake of beads indicated a preference for a medium devoid of nutrients, such as saline, though temperature was not a factor. An amoebal predilection for beads of lower charge and greater hydrophobicity was demonstrated. Furthermore, a preference for the largest bead size used (2.0 m) was observed. The influence of either Con A or mannose or glucose on bead association was apparently limited. The fate of foreign DNA ingested by Acanthamoeba appeared to indicate that such DNA was destroyed, as it could not be detected following extraction procedures and PCR amplification.

Oral uptake and distribution of microspheres

There is a growing body of experimental evidence suggesting that the gastrointestinal tract (GIT) may be penetrated by sub-micron sized polymeric particles which have the capacity to deliver therapeutic compounds. We investigated this, initially with Fluoresbrite™ carboxylate latex microspheres (0.87 m diameter) which were administered orally to rats. Microsphere numbers within blood samples were then quantified using fluorescence microscopy or FACS technology. These studies were prone to quantitative error, but indicated that increased microsphere translocation occurred if particles were administered in conjunction with large volumes of hypotonic liquid, and that uptake was very rapid. Test particles were detected in blood, only a few minutes after dosing. To improve quantification, GPC technology was adopted. 0.22 m latex particles were found to accumulate in greatest numbers within the Mononuclear phagocyte system tissues after gavage. Again translocation was rapid. The ability of test particles to leave the intestinal lumen and access systemic compartments was found to be highly dependent on their size and hydrophobicity, determined by hydrophobic interaction chromatography. Considerably lower numbers of 0.97 m diameter latex microspheres were detectable within extra-intestinal tissue locations after gavage. Histological studies showed that Fluoresbrite™ microspheres accumulate within the liver, spleen, Mesenteric lymph node and vasculature of rats after oral administration. Fluorescent particles were observed in both the Peyer's patches (PPs), and non lymphoid regions of rat intestinal mucosa after gavage, conductive to the acceptance that more than one mechanism of particle absorption may operate.

The targeting of corticosteroids to inflamed tissues

In recent years, much interest has focused on the beneficial effects of administering potentially harmful therapeutic agents in drug carriers so as to reduce their toxic side effects. Rheumatoid arthritis is a chronic systemic disease with progressive destruction of the Joints and long term patient disability, Corticosteroids have been shown to retard the progression of Joint destruction but are limited in their use due to adverse side effects,This project, following the line of investigation started by other workers, was designed to study the use of microspheres to deliver corticosteroids to inflamed tissues by both the oral and intravenous routes. Hydrocortisone (HC)-loaded albumin microspheres were prepared by three different methods, by direct incorporation of HC within the particles, by indirect incorporation of HC by the enzymatic conversion of hydrocortisone-21-phosphate (H-21-P) to HC within the particles, and by the adsorption of HC onto the surface. HC was also loaded with PLA microspheres. The level of corticosteriod loading and in vitro release from microspheres was determined by HPLC analysis. A reversed-phase, ion-pairing HPLC method was developed to simultaneously measure both HC and H-21-P. The highest level of corticosteroid loading was achieved using the incorporation of H-21-P with enzymatic conversion to HC method. However, HPLC analysis showed only 5% of the incorporated steroid was HC. In vitro release rates of steroid from albumin microspheres showed >95% of incorporated steroid was released within 2 hours of dissolution. Increasing the protein:steroid ratio, and the temperature and duration of microsphere stabilization, had little effect on prolonging drug release. In vivo studies, using the carrageenan-induced rat hind-paw model of inflammation, indicated steroid-incorporated microspheres administered both orally and intraperitoneally were not therapeutically advantageous when compared to equivalent free steroid doses. The ability of orally and intravenously dosed [125I]~albumin microspheres (2.67 μm mean diameter) to accumulate in acutely and chronically inflamed tissues was investigated, The subcutaneous air-pouch was the model of inflammation used, with carrageenan as the inflammatory stimulus. Acute and chronic inflammation was shown to be consistently formed  in pouch tissues in terms of cell infiltration and fluid exudate formation in the pouch cavity. Albumin microspheres were shown to accumulate in the inflamed tissues and pouch fluids after both oral and intravenous administration. Preliminary, confirmatory studies using latex microspheres and quantitation by GPC analysis, also indicated microsphere accumulation in both acutely and chronically inflamed air-pouch tissues. tntl lUr"'poucbtis,sues; The results indicate the uptake and transfer of microspheres across the gastrointestinal tract into the circulation and their migration through disrupted endothelium and basement membranes at the inflamed sites. , .

Steric stabilization and dissolution characteristics of aqueous suspensions of pharmaceutical interest

The adsorption of two qroups of nonionic surface active agents and a series of hiqh molecular weiqht hydrophilic polymer fractions onto a polystyrene latex and a drug substance diloxanide furoate B.P. has been investigated. The presence of pores within the drug surface has been demonstrated and this is shown to increase the adsorption of low molecular weight polymer species. Differences in the maximum amount of polymer adsorbed at both solid-solution interfaces have been ascribed to the different hydrophobicities of the surface as determined by contact angle measurements. Adsorbed layer thicknesses of polymer on polystyrene latex have been determined by three techniques: microelectrophoresis, intensity fluctuation spectroscopy and by viscometric means. These results, in combination with adsorption data, were used to interpret the configuration of the adsorbed polymer molecules at the interface. The type of druq suspension produced on adsorbing the different polymers in the absence of electrostatic stabilization was correlated with theoretical prediuctions of suspension characteristics deduced from potential energy diagrams, The agreement was good for the adsorption of short chain length surfactants, but for the polyvinylalcohols, discrepancies were found between experiment and theory. This was attributed to the inappropriate use of a mean segment density approximation within the adsorbed layer to calculate attractive potentials between particles. A maximum in the redispersibility values for suspensions coated with adsorbed nonylphenylethoxylates was attributed to "partial static stabilization" of the particles in conjunction with the attractive forces operating in the sediment between bare surface patches on neighbouring particles. No significant change in the dissolution of the drug was observed when nonylphenylethoxylates were adsorbed due to desorption upon contact with the dissolution medium. Pluronic F68 and all the polyvinylalcohol fractions caused a reduction in the dissolution rate which is explained by the decreased diffusion of drug' through the adsorbed polymer layer.

The effect of certain hydrophilic polymers on suspension stability

The adsorption of nonionic surface active agents of polyoxyethylene glycol monoethers of n hexadecanols on polystyrene latex and nonionic cellulose polymers of hydroxyethyl cellulose, hydroxypropyl cellulose and hydroxypropyl methylcellulose on polystyrene latex and ibuprofen drug particles have been studied. The adsorbed layer thicknesses were determined by means of microelectrophoretic and viscometric methods. The conformation of the adsorbed molecules at the solid-liquid interface was deduced from the molecular areas and the adsorbed layer thicknesses. Comparison of the adsorption results obtained from polystyrene latex and ibuprofen particles was made to explain the conformation difference between these two adsorbates. Sedimentation volumes and redispersibility values were the main criteria used to evaluate suspension stability. At low concentrations of surface active agents, hard caked suspensions were found, probably due to the attraction between the uncoated areas or, the mutual adsorption of the adsorbed molecules on the bare surface of the particles in the sediment. At high concentrations of hydroxypropyl cellulose and hydroxypropyl methylcellulose, heavily caked sediments were attributed to network structure formation by the adsorbed molecules. An attempt was made to relate the characteristics of the suspensions to the potential energy of interaction curves. Generally, the agreement between theory and experiment was good, but for hydroxyethyl cellulose-ibuprofen systems discrepancies were found. Experimental studies showed that hydroxyethyl cellulose flocculated polystyrene latex over a rather wide range of concentrations; similarly, hydroxyethyl cellulose-ibuprofen suspensions were also flocculated. Therefore, it ls suggested that a term to account for flocculation energy of the polymer should be added to the total energy of interaction. A rheometric method was employed to study the flocculation energy of the polymer.