Fiber functionalization for biomedical applications

Deep-eutectic solvents (DES) are considered novel renewable and biodegradable solvents, with a cheap and easy synthesis, without waste production. Later it was discovered a new subclass of DES that even can be biocompatible, since their synthesis uses primary metabolites such as amino acids, organic acids and sugars, from organisms. This subclass was named natural deep-eutectic solvents (NADES). Due to their properties it was tried to study the interaction between these solvents and biopolymers, in order to produce functionalized fibers for biomedical applications. In this way, fibers were produced by using the electrospinning technique. However, it was first necessary to study some physical properties of NADES, as well as the influence of water in their properties. It has been concluded that the water has a high influence on NADES properties, which can be seen on the results obtained from the rheology and viscosity studies. The fluid dynamics had changed, as well as the viscosity. Afterwards, it was tested the viability of using a starch blend. First it was tested the dissolution of these biopolymers into NADES, in order to study the viability of their application in electrospinning. However the results obtained were not satisfactory, since the starch polymers studied did not presented any dissolution in any NADES, or even in organic solvents. In this way it was changed the approach, and it was used other biocompatible polymers. Poly(ethylene oxide), poly(vinyl alcohol) and gelatin were the others biopolymers tested for the electrospinning, with NADES. All polymers show good results, since it was possible to obtain fibers. However for gelatin it was used only eutectic mixtures, containing active pharmaceutical ingredients (API’s), instead of NADES. For this case it was used mandelic acid (antimicrobial properties), choline chloride, ibuprofen (anti-inflammatory properties) and menthol (analgesic properties). The polymers and the produced fibers were characterized by scanning electron microscope (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). With the help of these techniques it was possible to conclude that it was possible to encapsulate NADES within the fibers. Rheology it was also study for poly(ethylene oxide) and poly(vinyl alcohol), in a way to understand the influence of polymer concentration, on the electrospinning technique. For the gelatin, among the characterization techniques, it was also performed cytotoxicity and drug release studies. The gelatin membranes did not show any toxicity for the cells, since their viability was maintained. Regarding the controlled release profile experiment no conclusion could be drawn from the experiments, due to the rapid and complete dissolution of the gelatin in the buffer solution. However it was possible to quantify the mixture of choline chloride with mandelic acid, allowing thus to complete, and confirm, the information already obtained for the others characterization technique.

Biological effects of acrylic engineered particulate-systems

Polymeric particulate-systems are of great relevance due to their possible biomedical applications, among them as carriers for the nano- or microencapsulation of drugs. However, due to their unique specific properties, namely small size range, toxicity issues must be discarded before allowing its use on health-related applications. Several polymers, as poly(methyl methacrylate) (PMMA), have proved to be suitable for the preparation of particulate-systems. However, a major drawback of its use refers to incomplete drug release from particles matrix. Recent strategies to improve PMMA release properties mention the inclusion of other acrylic polymers as Eudragit (EUD) on particles formulation. Though PMMA and EUD are accepted by the FDA as biocompatible, their safety on particle composition lacks sufficient toxicological data. The main objective of this thesis was to evaluate the biological effects of engineered acrylic particulate-systems. Preparation, physicochemical characterization and in vitro toxicity evaluation were assessed on PMMA and PMMA-EUD (50:50) particles. The emulsification-solvent evaporation methodology allowed the preparation of particles with spherical and smooth surfaces within the micrometer range (±500 nm), opposing surface charges and different levels of hydrophobicity. It was observed that particles physicochemical properties (size and charge) were influenced by biological media composition, such as serum concentration, ionic strength or pH. In what concerns to the in vitro toxicological studies, particle cellular uptake was observed on different cell lines (macrophages, osteoblasts and fibroblasts). Cytotoxicity effects were only found after 72 h of cells exposure to the particles, while no oxidative damage was observed neither on osteoblasts nor fibroblasts. Also, no genotoxicity was found in fibroblast using the comet assay to assess DNA damage. This observation should be further confirmed with other validated genotoxicity assays (e.g. Micronucleus Assay). The present study suggests that the evaluated acrylic particles are biocompatible, showing promising biological properties for potential use as carriers in drug-delivery systems.

Cellulose nanorods in liquid crystalline elastomers for improved actuators

Nanotechnology plays a central role in ‘tailoring’ materials’ properties and thus improving its performances for a wide range of applications. Coupling nature nano-objects with nanotechnology results in materials with enhanced functionalities. The main objective of this master thesis was the synthesis of nanocrystalline cellulose (NCCs) and its further incorporation in a cellulosic matrix, in order to produce a stimuli-responsive material to moisture. The induced behaviour (bending/unbending) of the samples was deeply investigated, in order to determine relationships between structure/properties. Using microcrystalline cellulose as a starting material, acid hydrolysis was performed and the NCC was obtained. Anisotropic aqueous solutions of HPC and NCC were prepared and films with thicknesses ranging from 22μm to 61μm were achieved, by using a shear casting technique. Microscopic and spectroscopic techniques as well as mechanical and rheological essays were used to characterize the transparent and flexible films produced. Upon the application of a stimulus (moisture), the bending/unbending response times were measured. The use of NCC allowed obtaining films with response times in the order of 6 seconds for the bending and 5 seconds for the unbending, improving the results previously reported. These promising results open new horizons for building up improved soft steam engines.

Modelos determinísticos e estocásticos aplicados ao cálculo de provisões para sinistros

A estimação das provisões para sinistros é de extrema importância na atividade de uma seguradora do ramo Não Vida, porque, por um lado, são necessários recursos suficientes para garantir o pagamento de qualquer sinistro que ocorra e, por outro, o excesso de provisões pode condicionar a rentabilidade da companhia. Assim, faz parte do papel do atuário garantir a adequação destas provisões técnicas. Com esse propósito, é habitualmente utilizado o método determinístico Chain Ladder para a estimação das provisões para sinistros. Contudo, de forma a contornar as limitações desta metodologia, recorre-se a modelos estocásticos, como o modelo proposto por Thomas Mack, uma aplicação dos Modelos Lineares Generalizados, a técnica Bootstrap, entre outros. Dos modelos estocásticos é de salientar um dos mais recentemente estudados, Double Chain Ladder, que está diretamente associado ao método Chain Ladder, trazendo algumas vantagens sobre esse último e possibilitando também a aplicação da técnica Bootstrap e uma simples associação ao método Bornhuetter-Ferguson. O objetivo desta dissertação consiste na aplicação e análise destes modelos na estimação de provisões para sinistros no ramo Não Vida.

Synthesis of Polymeric Nanoparticles for biomedical delivery applications

Polymeric nanoparticles (PNPs) have attracted considerable interest over the last few years due to their unique properties and behaviors provided by their small size. Such materials could be used in a wide range of applications such as diagnostics and drug delivery. Advantages of PNPs include controlled release, protection of drug molecules and its specific targeting, with concomitant increasing of the therapeutic index. In this work, novel sucrose and cholic acid based PNPs were prepared from different polymers, namely polyethylene glycol (PEG), poly(D,L-lactic-co-glycolic acid) (PLGA) and PLGA-co-PEG copolymer. In these PNP carriers, cholic acid will act as a drug incorporation site and the carbohydrate as targeting moiety. The uptake of nanoparticles into cells usually involves endocytotic processes, which depend primarily on their size and surface characteristics. These properties can be tuned by the nanoparticle preparation method. Therefore, the nanoprecipitation and the emulsion-solvent evaporation method were applied to prepare the PNPs. The influence of various parameters, such as concentration of the starting solution, evaporation method and solvent properties on the nanoparticle size, size distribution and morphology were studied. The PNPs were characterized by using atomic force microscopy (AFM), scanning electron microscopy (SEM) and dynamic light scattering (DLS) to assess their size distribution and morphology. The PNPs obtained by nanoprecipitation ranged in size between 90 nm and 130 nm with a very low polydispersity index (PDI < 0.3). On the other hand, the PNPs produced by the emulsion-solvent evaporation method revealed particle sizes around 300 nm with a high PDI value. More detailed information was found in AFM and SEM images, which demonstrated that all these PNPs were regularly spherical. ζ-potential measurements were satisfactory and evidenced the importance of sucrose moiety on the polymeric system, which was responsible for the obtained negative surface charge, providing colloidal stability. The results of this study show that sucrose and cholic acid based polymeric conjugates can be successfully used to prepare PNPs with tunable physicochemical characteristics. In addition, it provides novel information about the materials used and the methods applied. It is hoped that this work will be useful for the development of novel carbohydrate based nanoparticles for biomedical applications, specifically for targeted drug delivery.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Biomimetic mineralization: encapsulation in calcium carbonate shells

Calcium carbonate biomineralization is a self-assembly process that has been studied to be applied in the biomedical field to encapsulate biomolecules. Advantages of engineering mineral capsules include improved drug loading efficiencies and protection against external environment. However, common production methods result in heterogeneous capsules and subject biomolecules to heat and vibration which cause irreversible damage. To overcome these issues, a microfluidic device was designed, manufactured and tested in terms of selectivity for water and oil to produce a W/O/W emulsion. During the development of this work there was one critical challenge: the selective functionalization in closed microfluidic channels. Wet chemical oxidation of PDMS with 1M NaOH, confirmed by FTIR, followed by adsorption of polyelectrolytes - PDADMAC/PSS - confirmed by UV-Vis and AFM results, render the surface of PDMS hydrophilic. UV-Vis spectroscopy also confirmed that this modification did not affect PDMS optical properties, making possible to monitor fluids and droplets. More important, with this approach PDMS remains hydrophilic over time. However, due to equipment constrains selectivity in microchannels was not achieved. Therefore, emulsion studies took place with conventional methods. Several systems were tried, with promising results achieved with CaCO3 in-situ precipitation, without the use of polymers or magnesium. This mineral stabilizes oil droplets in water, but not in air due to incomplete capsule formation.

Engineered MRI nanoprobes based on superparamagnetic iron oxide nanoparticles

This project aimed to engineer new T2 MRI contrast agents for cell labeling based on formulations containing monodisperse iron oxide magnetic nanoparticles (MNP) coated with natural and synthetic polymers. Monodisperse MNP capped with hydrophobic ligands were synthesized by a thermal decomposition method, and further stabilized in aqueous media with citric acid or meso-2,3-dimercaptosuccinic acid (DMSA) through a ligand exchange reaction. Hydrophilic MNP-DMSA, with optimal hydrodynamic size distribution, colloidal stability and magnetic properties, were used for further functionalization with different coating materials. A covalent coupling strategy was devised to bind the biopolymer gum Arabic (GA) onto MNPDMSA and produce an efficient contrast agent, which enhanced cellular uptake in human colorectal carcinoma cells (HCT116 cell line) compared to uncoated MNP-DMSA. A similar protocol was employed to coat MNP-DMSA with a novel biopolymer produced by a biotechnological process, the exopolysaccharide (EPS) Fucopol. Similar to MNP-DMSA-GA, MNP-DMSA-EPS improved cellular uptake in HCT116 cells compared to MNP-DMSA. However, MNP-DMSA-EPS were particularly efficient towards the neural stem/progenitor cell line ReNcell VM, for which a better iron dose-dependent MRI contrast enhancement was obtained at low iron concentrations and short incubation times. A combination of synthetic and biological coating materials was also explored in this project, to design a dynamic tumortargeting nanoprobe activated by the acidic pH of tumors. The pH-dependent affinity pair neutravidin/iminobiotin, was combined in a multilayer architecture with the synthetic polymers poy-L-lysine and poly(ethylene glycol) and yielded an efficient MRI nanoprobe with ability to distinguish cells cultured in acidic pH conditions form cells cultured in physiological pH conditions.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

Cerebral vasculopathy in children with sickle cell disease A study of genetic modulators of the disease

Sickle cell disease (SCD) is a genetic disorder with recessive transmission, caused by the mutation HBB:c.20A>T. It originates hemoglobin S that forms polymers inside the erythrocyte, upon deoxygenation, deforming it and ultimately leading to premature hemolysis. The disease presents with high heterogeneity of clinical manifestations, the most devastating of which, ischemic stroke, occurs in 11% of patients until 20 years of age. In this study, we tried to identify genetic modifiers of risk and episodes of stroke by studying 66 children with SCD, grouped according to the degree of cerebral vasculopathy (Stroke, Risk and Control). Association studies were performed between the three phenotypic groups and hematological and biochemical parameters of patients, as well as with 23 polymorphic regions in genes related to vascular cell adhesion (VCAM-1, THBS-1 and CD36), vascular tonus (NOS3 and ET-1) and inflammation (TNF-α and HMOX-1). Relevant data was collected from patient’s medical records. Known genetic modulators of SCD (beta-globin cluster haplotype and HBA and BCL11A genotypes) and putative genetic modifiers of cerebral vasculopathy were characterized. Differences in their distribution among groups were assessed. VCAM-1 rs1409419 allele C and NOS3 rs207044 allele C were associated to stroke events, while VCAM-1 rs1409419 allele T was found to be protective. Alleles 4a and 4b of NOS3 27 bp VNTR appeared to be respectively associated to stroke risk and protection. HMOX-1 longer STRs seemed to predispose to stroke. Higher hemoglobin F levels were found in Control group, as a result of Senegal haplotype or of BCL11A rs11886868 allele T, and higher lactate dehydrogenase levels, marker of hemolysis, were found in Risk group. Molecular mechanisms underlying the modifier functions of the relevant genetic variants are discussed.

Chitosan-based magnetic nanoparticles for osteosarcoma theranostic

Cancer is a well-known disease with a significant impact in society not only due to its incidence, more evident in more developed countries, but also due to the expenses related to medical treat-ments. Cancer research is considered an increasingly logical science with great potential for the development of new treatment options. Advances in nanomedicine have resulted in rapid devel-opment of nanomaterials with considerable potential in cancer diagnostics and treatment. The combination of diagnosis and treatment in a single nano-platform is named theranostic. In this PhD thesis a theranostic system for osteosarcoma was proposed, composed by a magnetic core, a polymeric coating, and a chemotherapeutic drug. The presence of a specific targeting agent, in this case a monoclonal antibody, provides high specificity to the proposed theranostic system. For the core of the proposed theranostic system, stable aqueous suspensions of superparamagnetic iron oxide nanoparticles with an average diameter of 9 nm were produced. Chitosan-based poly-meric nanoparticles with a hydrodynamic diameter around 150 nm were successfully produced. Incorporation of iron oxide nanoparticles into the polymeric ones increased their hydrodynamic diameter to at least 250 nm. A monoclonal antibody specific for a transmembranar protein (car-bonic anhydrase IX) present in solid tumors was developed by hybridoma technology. Functional hybridomas producing the desired monoclonal antibodies were obtained. The proposed theranostic system functionality was evaluated in separated parts of its components. Uncoated and coated iron oxide nanoparticles with chitosan-based polymers generated heat under the application of an external alternating magnetic field. Uncoated iron oxide nanoparticles sta-bilized with oleic acid were able to enhance contrast in magnetic resonance imaging. Drug deliv-ery studies were conducted in chitosan-based polymeric nanoparticles without and with the in-corporation of iron oxide nanoparticles, demonstrating to be an effective drug delivery platform for doxorubicin. The theranostic system proposed in this PhD thesis is very promising for cancer theranostic, demonstrating to be applicable in solid tumors such as osteosarcoma.

The burden of chronic low back pain in the adult Portuguese population : an epidemiological population-based study under the scope of Epireumapt

RESUMO: Nos países desenvolvidos a lombalgia é a condição músculo-­‐esquelética mais prevalente. Quando evolui para um quadro crónico é responsável por um encargo económico bastante considerável, não só em relação aos indivíduos, mas também para a sociedade. A lombalgia crónica é por isso uma das principais causas de perda de produtividade e de perda de independência económica, nomeadamente através do absenteísmo (ausência do trabalho), do presenteísmo (perda de produtividade no trabalho, devido à capacidade diminuída provocada pela lombalgia) e da incapacidade para trabalhar (invalidez permanente, total ou parcial). Até à data, em Portugal, a prevalência e carga social da lombalgia crónica eram desconhecidas. Até agora não existiam estudos populacionais de grande dimensão sobre este tema. O objetivo principal desta tese foi determinar a prevalência de lombalgia crónica, e também avaliar a carga social que esta tem na população adulta Portuguesa. O trabalho de investigação foi desenvolvido no âmbito do Estudo Epidemiológico de Doenças Reumáticas em Portugal (EpiReumaPt). Este foi o primeiro estudo de larga escala e de base populacional, que determinou a prevalência de doenças reumáticas e músculo-­‐ esqueléticas na população adulta portuguesa. Foi realizado numa amostra aleatória e representativa, de 10.661 indivíduos do Continente, da Região Autónoma dos Açores e da Região Autónoma da Madeira, entre Setembro de 2011 e Dezembro de 2013. Esta tese foi dividida em duas secções. A primeira secção incluiu o detalhe das questões relativas ao desenvolvimento e gestão do EpiReumaPt, constituindo-­‐se como um guia prático sobre como realizar um estudo de base populacional de larga escala, em Portugal. A metodologia detalhada do EpiReumaPt foi também descrita nesta secção e incluiu os objectivos, o desenho do estudo, as características de recrutamento e a preparação de dados para análise. Nesta secção foram ainda descritos os principais resultados do EpiReumaPt. Estes evidenciaram que a lombalgia foi a condição músculo-­‐esquelética com maior prevalência na população adulta portuguesa.A segunda secção desta tese estimou a prevalência da lombalgia crónica ativa na população adulta Portuguesa, e avaliou a carga social esta condição. A lombalgia ativa foi definida com base na dor auto-­‐relatada no dia da entrevista e que persistia há pelo menos 90 dias (independentemente da causa). A lombalgia foi definida como dor na área definida entre a margem inferior das décimas segundas costelas até às pregas glúteas inferiores, com ou sem dor nos membros inferiores. A carga social foi medida tendo em conta os seguintes parâmetros: qualidade de vida, função, consumo de recursos de saúde, consumo de analgésicos e outros fármacos usados no alívio da dor, sintomas de ansiedade e sintomas de depressão. Os resultados mostraram que o consumo de recursos em saúde e a carga social da lombalgia crónica na população adulta Português é significativa. Também a incapacidade causada pela lombalgia crónica,nos indivíduos com idade ativa, é responsável por elevadas taxas de absenteísmo e má qualidade de vida, aos quais acresce o consequente ónus socioeconómico. Esta tese também concluiu que o consumo de analgésicos e outros medicamentos para alívio da dor, na população adulta portuguesa com lombalgia crónica ativa, é relativamente baixa. A maioria destes indivíduos não tomava nenhum medicamento analgésico, independentemente da intensidade da dor. Mesmo os indivíduos que reportaram dor intensa, apenas 4.0% estavam no primeiro degrau da escada analgésica da Organização Mundial de Saúde; 2.3% usavam opióides fracos e 0.03% usavam opióides fortes para controlar a dor (segundo e terceiro degrau da escada analgésica da Organização Mundial da Saúde). O trabalho de investigação também confirmou que a prevalência de sintomas de ansiedade e depressão entre os indivíduos adultos portugueses com lombalgia crónica ativa é elevada. Nestes indivíduos, registou-­‐se um consumo mais elevado de analgésicos e outros medicamentos para alívio da dor, quando comparados com os indivíduos com lombalgia crónica activa sem esses sintomas psicológicos. Os grupos terapêuticos mais utilizados foram os ansiolíticos, sedativos e hipnóticos, os antidepressivos e os anti-­‐inflamatórios não esteróides. A intensidade média da dor reportada foi também maior entre os indivíduos com lombalgia ativa e sintomas de ansiedade e/ou depressão. Também nestes, foi reportada pior função e pior estado de saúde. Em relação ao consumo de recursos de saúde foram encontradas diferenças significativas entre as duas populações: os indivíduos com lombalgia ativa e sintomas psicológicos concomitantes registaram maior número de consultas de psiquiatria de outras especialidades médicas, assim como precisaram de mais apoio domiciliário nos 12 meses prévios à entrevista do EpiReumaPt. Foram também identificados os fatores associados a sintomas isolados de ansiedade, a sintomas isolados de depressão e a sintomas de ansiedade e depressão. Resumindo,esta tese permitiu concluir que a lombalgia crónica é um problema de saúde comum na população adulta portuguesa, contribuindo para um elevado grau de incapacidade e que consequentemente afeta o desempenho laboral e o bem-­‐estar dos indivíduos. A lombalgia crónica é também responsável por um consumo considerável de recursos de saúde. Acresce ainda que os sintomas de ansiedade e depressão são comuns, entre os indivíduos com lombalgia crónica, contribuindo com uma carga social adicional.---------------------------------- ABSTRACT:Low Back Pain(LBP) is the most prevalent of musculoskeletal condition in developed countries.When it becomes chronic, LBP causesan enormous economic burden on individuals and society -­‐ it is one of the leading causes of loss of productivity and economic independence through absenteeism (time off work), presenteeism (lost productivity because of diminished capacity while at work) and work disability (permanent, partial or complete disablement for work purposes). In Portugal the prevalence and burden of LBP and chronic LBP (CLBP) were poorly defined. Until now no large population-­‐based studies have focused on this. The main aim of this thesis was to determine the prevalence of LBP and CLBP, and also to assess the burden of CLBP in the adult rtuguese population. The research work was developed under the scope of EpiReumaPt (the Portuguese Epidemiologic Study of Rheumatic Diseases). EpiReumaPt was the first national large population-­‐based and prevalence study of rheumatic and musculoskeletal diseases (RMD). It was performed among a randomized and representative sample of 10,661 adult Portuguese subjects recruited in Mainland, Azores and Madeira Islands, from September 2011 to December 2013. The first section of this thesis included detailed issues regarding the development and management of EpiReumaPt, and provided a practical guide on how to set-­‐up a large population-­‐based study in Portugal. The detailed methodology of EpiReumaPt, including its objectives,study design,recruitment features,and data preparation for analyses were also described. The main results from EpiReumaPt study were provided in this section and showed that LBP was the musculoskeletal condition with highest prevalence among Portuguese population. The second section of this thesis estimated the prevalence of active CLBP among adult Portuguese population, and assessed the social burden of this condition. Active CLBP was defined based on self-­‐reported pain on the day of the interview, and for most of the time for at least 90 days (independently from cause). LBP was defined as pain in the back area from the lower margin of the twelfth ribs to he lower gluteal folds, with or without pain referred to the lower limbs. Social burden was measured taking into account the following outcomes: quality of life, function, healthcare resources consumption, analgesic and other pain relief drugs intake, anxiety and depression symptoms. Results showed that the healthcare consumption and social burden of CLBP among adult Portuguese population were enormous, and the disability caused by CLBP among subjects in a working age provides high rates of absenteeism (work loss) and poor quality of life, with a consequent socioeconomic burden. This thesis also concluded that analgesic and other pain relief drugs untake among adult Portuguese population with active CLBP was very low. Most of the subjects with active CLBP did not take any analgesic drug regardless pain severity. Even when subjects self-­‐reported severe pain, only 24.0% were in the 1st step of the analgesic ladder,2.3% used weak analgesic opioids and 0.03% used strong opioids (2nd and 3rd step of WHO analgesic ladder, respectively) to control pain . The research work also confirmed that the prevalence of anxiety and depression symptoms among adult Portuguese subjects with active CLBP was high. Regarding pharmacological therapy, the intake of analgesic and other pain relief drugs was higher among subjects with anxiety and/or depression symptoms, when compared with subjects without these psychological symptoms. Anxiolytics, sedatives and hypnotics, antidepressants and NSAIDs intake had higher usage rates among these subjects. The pain severity mean was also higher among this subjects and function and health status was worse. Regarding healthcare resources consumption,significant differences between the two populations were found. Subjects with ctive CLBP and concomitant psychological symptoms had a higher number of psychiatrist and other physician visits. They also needed more home care in the previous 12 months. Factors associated with isolated symptoms of anxiety, depression,and concomitant anxiety and depression symptoms were also identified. Summarizing, we concluded that CLBP is a common health problem among adult Portuguese population contributing to disability and affecting labor performance, and the well being of subjects. it is also responsible for considerable healthcare resource consumption. Anxiety and depression symptoms are common among subjects with CLBP and provided an additional burden among them.

Polyhydroxyalkanoates production by photosynthetic mixed cultures

Polyhydroxyalkanoates (PHAs) are natural biologically synthesized polymers that have been the subject of much interest in the last decades due to their biodegradability. Thus far, its microbial production is associated with high operational costs, which increases PHA prices and limits its marketability. To address this situation, this thesis’ work proposes the utilization of photosynthetic mixed cultures (PMC) as a new PHA production system that may lead to a reduction in operational costs. In fact, the operational strategies developed in this work led to the selection of PHA accumulating PMCs that, unlike the traditional mixed microbial cultures, do not require aeration, thus permitting savings in this significant operational cost. In particular, the first PHA accumulating PMC tested in this work was selected under non-aerated illuminated conditions in a feast and famine regime, being obtained a consortium of bacteria and algae, where photosynthetic bacteria accumulated PHA during the feast phase and consumed it for growth during the famine phase, using the oxygen produced by algae. In this symbiotic system, a maximum PHA content of 20% cell dry weight (cdw) was reached, proving for the first time, the capacity of a PMC to accumulate PHA. During adaptation to dark/light alternating conditions, the culture decreased its algae content but maintained its viability, achieving a PHA content of 30% cdw. Also, the PMC was found to be able to utilize different volatile fatty acids for PHA production, accumulating up to 20% cdw of a PHA co-polymer composed of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (HV) monomers. Finally, a new selective approach for the enrichment of PMCs in PHA accumulating bacteria was tested. Instead of imposing a feast and famine regime, a permanent feast regime was used, thus selecting a PMC that was capable of simultaneously growing and accumulating PHA, being attained a maximum PHA content of 60% cdw, the highest value reported for a PMC thus far. The results presented in this thesis prospect the utilization of cheap, VFA-rich fermented wastes as substrates for PHA production, which combined with this new photosynthetic technology opens up the possibility for direct sunlight illumination, leading to a more cost-effective and environmentally sustainable PHA production process.

The perfect paint in modern art conservation: a comparative study of 21st century vinyl emulsions

Contemporary painting places, and will continue to place, several questions about its meaning, its chemical nature, its durability and the best way to preserve it. This research aims at putting together comprehensive data on vinyl based paints, including their components, their properties, their aging behavior and their response to selected cleaning products. In this project degradation mechanisms of vinyl binders and formulations used in the 20th and 21st century were studied. Stability over time of selected vinyl polymers was assessed through natural indoor and artificially aging. The objective was to enhance knowledge and understanding of vinyl emulsion formulations and their performance over time. Overall conservation state of pictorial layers namely, adhesion, cohesion and discoloration of selected case studies from the Portuguese artist Julião Sarmento (b.1948) was correlated with the observed molecular level changes studied in laboratory experiments. Sarmento’s paintings were chosen due to conservation concerns (discoloration) on some of his works from the 90’s. Besides, research was carried out to start increasing the knowledge of what can be expected of PVAc based paints in terms of response to conservation treatments namely, surface cleaning. Artificial aging showed that the most recent formulations which are based on a poly(vinyl acetate), poly(vinyl chloride) and polyethylene terpolymer are less stable when compared to some homopolymer formulations. From the four pigments studied, titanium dioxide rutile and a carbon based black proved to be stabilizers for both types of polymer. The mixture lithopone plus calcium carbonate has showed to have a photocatalytic effect on the binders. The studied paintings showed to be in an overall good state of conservation except for the paintings created in the 90’s with white glue and a mixture of white lithoponeand calcium carbonate. Discoloration of this white paint seems to be irreversible and ongoing and is still a major concern. The disapearance of the plasticizer was the only change detected. The current works created by Sarmento are expected to be more stable as they were painted using the rutile titanium dioxide. Immersion/cleaning tests showed that vinyl based paints can be susceptible to water and organic solvents like ethanol as some evidences point to the removal/diffusion of additives from the paint. The observations made point to the need to further proceed in this research field.

A technical investigation of an oil painting on copper support, including a study on consolidants for treatment

Paper submitted to e-conservation Journal: Maria Leonor Oliveira, Leslie Carlyle, Sara Fragoso, Isabel Pombo Cardoso and João Coroado, “Investigations into paint delamination and consolidation of an oil painting on copper support”.