Development of novel methods to determine crystalline glucose content of honey based on DSC, HPLC, and viscosity measurements and their use to examine the setting propensity of honey

Crystallization must occur in honey in order to produce set or creamed honey; however, the process must occur in a controlled manner in order to obtain an acceptable product. As a consequence, reliable methods are needed to measure the crystal content of honey (φ expressed as kg crystal per kg honey), which can also be implemented with relative ease in industrial production facilities. Unfortunately, suitable methods do not currently exist. This article reports on the development of 2 independent offline methods to measure the crystal content in honey based on differential scanning calorimetry and high-performance liquid chromatography. The 2 methods gave highly consistent results on the basis of paired t-test involving 143 experimental points (P > 0.05, r**2 = 0.99). The crystal content also correlated with the relative viscosity, defined as the ratio of the viscosity of crystal containing honey to that of the same honey when all crystals are dissolved, giving the following correlation: μr = 1 + 1398.8∅**2.318. This correlation can be used to estimate the crystal content of honey in industrial production facilities. The crystal growth rate at a temperature of 14 ◦C—the normal crystallization temperature used in practice—was linear, and the growth rate also increased with the total glucose content in the honey.

Area-wide development viability appraisals: the concept of threshold land value within a UK planning context

Area-wide development viability appraisals are undertaken to determine the economic feasibility of policy targets in relation to planning obligations. Essentially, development viability appraisals consist of a series of residual valuations of hypothetical development sites across a local authority area at a particular point in time. The valuations incorporate the estimated financial implications of the proposed level of planning obligations. To determine viability the output land values are benchmarked against threshold land value and therefore the basis on which this threshold is established and the level at which it is set is critical to development viability appraisal at the policy-setting (area-wide) level. Essentially it is an estimate of the value at which a landowner would be prepared to sell. If the estimated site values are higher than the threshold land value the policy target is considered viable. This paper investigates the effectiveness of existing methods of determining threshold land value. They will be tested against the relationship between development value and costs. Modelling reveals that threshold land value that is not related to shifts in development value renders marginal sites unviable and fails to collect proportionate planning obligations from high value/low cost sites. Testing the model against national average house prices and build costs reveals the high degree of volatility in residual land values over time and underlines the importance of making threshold land value relative to the main driver of this volatility, namely development value.

Normative modeling for personalized clinical pathway using organizational semiotics methods

Clinical pathways are widely adopted by many large hospitals around the world in order to provide high-quality patient treatment and reduce the length and cost of hospital stay. However, nowadays most of them are static and nonpersonalized. Our objective is to capture and represent clinical pathway using organizational semiotics method including Semantic Analysis which determines semantic units in clinical pathway, their relationship and their patterns of behavior, and Norm Analysis which extracts and specifies the norms that establish how and when these medical behaviors will occur. Finally, we propose a method to develop clinical pathway ontology based on the results of Semantic Analysis and Norm analysis. This approach will give a contribution to design personalized clinical pathway by defining a set of possible patterns of behavior and theClinical pathways are widely adopted by many large hospitals around the world in order to provide high-quality patient treatment and reduce the length and cost of hospital stay. However, nowadays most of them are static and nonpersonalized. Our objective is to capture and represent clinical pathway using organizational semiotics method including Semantic Analysis which determines semantic units in clinical pathway, their relationship and their patterns of behavior, and Norm Analysis which extracts and specifies the norms that establish how and when these medical behaviors will occur. Finally, we propose a method to develop clinical pathway ontology based on the results of Semantic Analysis and Norm analysis. This approach will give a contribution to design personalized clinical pathway by defining a set of possible patterns of behavior and the norms that govern the behavior based on patient’s condition.

A new error measure for forecasts of household-level, high resolution electrical energy consumption

As low carbon technologies become more pervasive, distribution network operators are looking to support the expected changes in the demands on the low voltage networks through the smarter control of storage devices. Accurate forecasts of demand at the single household-level, or of small aggregations of households, can improve the peak demand reduction brought about through such devices by helping to plan the appropriate charging and discharging cycles. However, before such methods can be developed, validation measures are required which can assess the accuracy and usefulness of forecasts of volatile and noisy household-level demand. In this paper we introduce a new forecast verification error measure that reduces the so called “double penalty” effect, incurred by forecasts whose features are displaced in space or time, compared to traditional point-wise metrics, such as Mean Absolute Error and p-norms in general. The measure that we propose is based on finding a restricted permutation of the original forecast that minimises the point wise error, according to a given metric. We illustrate the advantages of our error measure using half-hourly domestic household electrical energy usage data recorded by smart meters and discuss the effect of the permutation restriction.

J-measure based hybrid pruning for complexity reduction in classification rules

Prism is a modular classification rule generation method based on the ‘separate and conquer’ approach that is alternative to the rule induction approach using decision trees also known as ‘divide and conquer’. Prism often achieves a similar level of classification accuracy compared with decision trees, but tends to produce a more compact noise tolerant set of classification rules. As with other classification rule generation methods, a principle problem arising with Prism is that of overfitting due to over-specialised rules. In addition, over-specialised rules increase the associated computational complexity. These problems can be solved by pruning methods. For the Prism method, two pruning algorithms have been introduced recently for reducing overfitting of classification rules - J-pruning and Jmax-pruning. Both algorithms are based on the J-measure, an information theoretic means for quantifying the theoretical information content of a rule. Jmax-pruning attempts to exploit the J-measure to its full potential because J-pruning does not actually achieve this and may even lead to underfitting. A series of experiments have proved that Jmax-pruning may outperform J-pruning in reducing overfitting. However, Jmax-pruning is computationally relatively expensive and may also lead to underfitting. This paper reviews the Prism method and the two existing pruning algorithms above. It also proposes a novel pruning algorithm called Jmid-pruning. The latter is based on the J-measure and it reduces overfitting to a similar level as the other two algorithms but is better in avoiding underfitting and unnecessary computational effort. The authors conduct an experimental study on the performance of the Jmid-pruning algorithm in terms of classification accuracy and computational efficiency. The algorithm is also evaluated comparatively with the J-pruning and Jmax-pruning algorithms.

Continuous sky view factor maps from high resolution urban digital elevation models

This paper presents a new method to calculate sky view factors (SVFs) from high resolution urban digital elevation models using a shadow casting algorithm. By utilizing weighted annuli to derive SVF from hemispherical images, the distance light source positions can be predefined and uniformly spread over the whole hemisphere, whereas another method applies a random set of light source positions with a cosine-weighted distribution of sun altitude angles. The 2 methods have similar results based on a large number of SVF images. However, when comparing variations at pixel level between an image generated using the new method presented in this paper with the image from the random method, anisotropic patterns occur. The absolute mean difference between the 2 methods is 0.002 ranging up to 0.040. The maximum difference can be as much as 0.122. Since SVF is a geometrically derived parameter, the anisotropic errors created by the random method must be considered as significant.

Tropical climates at the Last Glacial Maximum: a new synthesis of terrestrial palaeoclimate data. I. Vegetation, lake-levels and geochemistry.

Palaeodata in synthesis form are needed as benchmarks for the Palaeoclimate Modelling Intercomparison Project (PMIP). Advances since the last synthesis of terrestrial palaeodata from the last glacial maximum (LGM) call for a new evaluation, especially of data from the tropics. Here pollen, plant-macrofossil, lake-level, noble gas (from groundwater) and δ18O (from speleothems) data are compiled for 18±2 ka (14C), 32 °N–33 °S. The reliability of the data was evaluated using explicit criteria and some types of data were re-analysed using consistent methods in order to derive a set of mutually consistent palaeoclimate estimates of mean temperature of the coldest month (MTCO), mean annual temperature (MAT), plant available moisture (PAM) and runoff (P-E). Cold-month temperature (MAT) anomalies from plant data range from −1 to −2 K near sea level in Indonesia and the S Pacific, through −6 to −8 K at many high-elevation sites to −8 to −15 K in S China and the SE USA. MAT anomalies from groundwater or speleothems seem more uniform (−4 to −6 K), but the data are as yet sparse; a clear divergence between MAT and cold-month estimates from the same region is seen only in the SE USA, where cold-air advection is expected to have enhanced cooling in winter. Regression of all cold-month anomalies against site elevation yielded an estimated average cooling of −2.5 to −3 K at modern sea level, increasing to ≈−6 K by 3000 m. However, Neotropical sites showed larger than the average sea-level cooling (−5 to −6 K) and a non-significant elevation effect, whereas W and S Pacific sites showed much less sea-level cooling (−1 K) and a stronger elevation effect. These findings support the inference that tropical sea-surface temperatures (SSTs) were lower than the CLIMAP estimates, but they limit the plausible average tropical sea-surface cooling, and they support the existence of CLIMAP-like geographic patterns in SST anomalies. Trends of PAM and lake levels indicate wet LGM conditions in the W USA, and at the highest elevations, with generally dry conditions elsewhere. These results suggest a colder-than-present ocean surface producing a weaker hydrological cycle, more arid continents, and arguably steeper-than-present terrestrial lapse rates. Such linkages are supported by recent observations on freezing-level height and tropical SSTs; moreover, simulations of “greenhouse” and LGM climates point to several possible feedback processes by which low-level temperature anomalies might be amplified aloft.

Software-based study of a non-sorting method for median calculation on a set of integer numbers

This paper presents a software-based study of a hardware-based non-sorting median calculation method on a set of integer numbers. The method divides the binary representation of each integer element in the set into bit slices in order to find the element located in the middle position. The method exhibits a linear complexity order and our analysis shows that the best performance in execution time is obtained when slices of 4-bit in size are used for 8-bit and 16-bit integers, in mostly any data set size. Results suggest that software implementation of bit slice method for median calculation outperforms sorting-based methods with increasing improvement for larger data set size. For data set sizes of N > 5, our simulations show an improvement of at least 40%.

MODIS-based vegetation index has sufficient sensitivity to indicate stand-level intra-seasonal climatic stress in oak and beech forests

Context: Variation in photosynthetic activity of trees induced by climatic stress can be effectively evaluated using remote sensing data. Although adverse effects of climate on temperate forests have been subjected to increased scrutiny, the suitability of remote sensing imagery for identification of drought stress in such forests has not been explored fully. Aim: To evaluate the sensitivity of MODIS-based vegetation index to heat and drought stress in temperate forests, and explore the differences in stress response of oaks and beech. Methods: We identified 8 oak and 13 beech pure and mature stands, each covering between 4 and 13 MODIS pixels. For each pixel, we extracted a time series of MODIS NDVI from 2000 to 2010. We identified all sequences of continuous unseasonal NDVI decline to be used as the response variable indicative of environmental stress. Neural Networks-based regression modelling was then applied to identify the climatic variables that best explain observed NDVI declines. Results: Tested variables explained 84–97% of the variation in NDVI, whilst air temperature-related climate extremes were found to be the most influential. Beech showed a linear response to the most influential climatic predictors, while oak responded in a unimodal pattern suggesting a better coping mechanism. Conclusions: MODIS NDVI has proved sufficiently sensitive as a stand-level indicator of climatic stress acting upon temperate broadleaf forests, leading to its potential use in predicting drought stress from meteorological observations and improving parameterisation of forest stress indices.

Advanced feature selection methods in multinominal dementia classification from structural MRI data

Recent studies showed that features extracted from brain MRIs can well discriminate Alzheimer’s disease from Mild Cognitive Impairment. This study provides an algorithm that sequentially applies advanced feature selection methods for findings the best subset of features in terms of binary classification accuracy. The classifiers that provided the highest accuracies, have been then used for solving a multi-class problem by the one-versus-one strategy. Although several approaches based on Regions of Interest (ROIs) extraction exist, the prediction power of features has not yet investigated by comparing filter and wrapper techniques. The findings of this work suggest that (i) the IntraCranial Volume (ICV) normalization can lead to overfitting and worst the accuracy prediction of test set and (ii) the combined use of a Random Forest-based filter with a Support Vector Machines-based wrapper, improves accuracy of binary classification.

Once upon a time, there was a fabulous funambulist: What children learn about the “high-level” vocabulary they encounter while listening to stories

Previous research has shown that listening to stories supports vocabulary growth in preschool and school-aged children and that lexical entries for even very difficult or rare words can be established if these are defined when they are first introduced. However, little is known about the nature of the lexical representations children form for the words they encounter while listening to stories, or whether these are sufficiently robust to support the child’s own use of such ‘high-level’ vocabulary. This study explored these questions by administering multiple assessments of children’s knowledge about a set of newly-acquired vocabulary. Four- and 6-year-old children were introduced to nine difficult new words (including nouns, verbs and adjectives) through three exposures to a story read by their class teacher. The story included a definition of each new word at its first encounter. Learning of the target vocabulary was assessed by means of two tests of semantic understanding – a forced choice picture-selection task and a definition production task – and a grammaticality judgment task, which asked children to choose between a syntactically-appropriate and syntactically-inappropriate usage of the word. Children in both age groups selected the correct pictorial representation and provided an appropriate definition for the target words in all three word classes significantly more often than they did for a matched set of non-exposed control words. However, only the older group was able to identify the syntactically-appropriate sentence frames in the grammaticality judgment task. Further analyses elucidate some of the components of the lexical representations children lay down when they hear difficult new vocabulary in stories and how different tests of word knowledge might overlap in their assessment of these components.

Contribution of insect pollinators to crop yield and quality varies with agricultural intensification

Background: Up to 75% of crop species benefit at least to some degree from animal pollination for fruit or seed set and yield. However, basic information on the level of pollinator dependence and pollinator contribution to yield is lacking for many crops. Even less is known about how insect pollination affects crop quality. Given that habitat loss and agricultural intensification are known to decrease pollinator richness and abundance, there is a need to assess the consequences for different components of crop production. Methods: We used pollination exclusion on flowers or inflorescences on a whole plant basis to assess the contribution of insect pollination to crop yield and quality in four flowering crops (spring oilseed rape, field bean, strawberry, and buckwheat) located in four regions of Europe. For each crop, we recorded abundance and species richness of flower visiting insects in ten fields located along a gradient fromsimple to heterogeneous landscapes. Results: Insect pollination enhanced average crop yield between 18 and 71% depending on the crop. Yield quality was also enhanced in most crops. For instance, oilseed rape had higher oil and lower chlorophyll contents when adequately pollinated, the proportion of empty seeds decreased in buckwheat, and strawberries’ commercial grade improved; however, we did not find higher nitrogen content in open pollinated field beans. Complex landscapes had a higher overall species richness of wild pollinators across crops, but visitation rates were only higher in complex landscapes for some crops. On the contrary, the overall yield was consistently enhanced by higher visitation rates, but not by higher pollinator richness. Discussion. For the four crops in this study, there is clear benefit delivered by pollinators on yield quantity and/or quality, but it is not maximized under current agricultural intensification. Honeybees, the most abundant pollinator, might partially compensate the loss of wild pollinators in some areas, but our results suggest the need of landscape-scale actions to enhance wild pollinator populations.

The roles and competencies of HR managers in Slovenian multinational companies

Purpose – The HRM literature provides various typologies of the HR managers’ roles in organizations. The purpose of this paper is to examine how the roles and required competencies of HR managers in Slovenian multinational companies change when these companies enter the international arena. Design/methodology/approach – The authors explored the total population of 25 Slovenian multinational companies (MNCs) operating in Serbia. In these companies the authors conducted interviews with 16 expatriates working in branches in Serbia, sent questionnaires to the CEOs, and conducted a survey of 50 HR managers and interviews with 15 of them. The authors used a triangulation approach and analyzed the results by multivariate methods and content analysis. Findings – The authors found that the complexity of HR managers’ roles, and expectations of their competencies, increases with an increasing level of internationalization of companies. Orientation to people and conflict resolution are seen as elementary competencies needed in all stages of internationalization. The key competence is seen to be strategic thinking that, according to CEOs and expatriates, goes hand in hand with cultural sensitivity, openness to change and a comprehensive understanding of the international environment and business processes. Practical implications – These results can potentially be used for assessing the HRM roles and competencies in different stages of company internationalization, especially MNCs operating in the ex-communist states of Europe, and will help HR managers to support expatriates, CEOs and other employees working in branches abroad more efficiently. Originality/value – This study contributes to the review and evaluation of the quite limited research on HR managers’ roles and competencies in MNCs. It focuses on MNCs and outward internationalization in the Central and Eastern European region. It contributes to studies of the HR managers’ roles and competencies and is the first study to establish a set of roles and competencies for HR managers in Slovenian MNCs.

Investigating the level of awareness of building assessment tools in the construction industry of Botswana

Environmental building assessment tools have been developed to measure how well or poorly a building is performing, or likely to perform, against a declared set of criteria, or environmental considerations, in order to achieve sustainability principles. Knowledge of environmental building assessment tools is therefore important for successful design and construction of environmentally friendly buildings for countries. The purpose of the research is to investigate the knowledge and level of awareness of environmental building assessment tools among industry practitioners in Botswana. One hundred and seven paper-based questionnaires were delivered to industry practitioners, including architects, engineers, quantity surveyors, real estate developers and academics. Users were asked what they know about building assessment, whether they have used any building assessment tool in the past, and what they perceive as possible barriers to the implementation of environmental building assessment tools in Botswana. Sixty five were returned and statistical analysis, using IBM SPSS V19 software, was used for analysis. Almost 85 per cent of respondents indicate that they are extremely or moderately aware of environmental design. Furthermore, the results indicate that 32 per cent of respondents have gone through formal training, which suggests ‘reasonable knowledge’. This however does not correspond with the use of the tools on the ground as 69 per cent of practitioners report never to have used any environmental building assessment tool in any project. The study highlights the need to develop an assessment tool for Botswana to enhance knowledge and further improve the level of awareness of environmental issues relating to building design and construction.

Investigating hydrological regimes and processes in a set of catchments with temporary waters in Mediterranean Europe

Seven catchments of diverse size in Mediterranean Europe were investigated in order to understand the main aspects of their hydrological functioning. The methods included the analysis of daily and monthly precipitation, monthly potential evapotranspiration rates, flow duration curves, rainfall runoff relationships and catchment internal data for the smaller and more instrumented catchments. The results showed that the catchments were less dry than initially considered. Only one of them was really semi-arid throughout the year. All the remaining catchments showed wet seasons when precipitation exceeded potential evapotrans-piration, allowing aquifer recharge, wet runoff generation mechanisms and relevant baseflow contribution. Nevertheless, local infiltration excess (Hortonian) overland flow was inferred during summer storms in some catchments and urban overland flow in some others. The roles of karstic groundwater, human disturbance and low winter temperatures were identified as having an important impact on the hydrological regime in some of the catchments.