Obtenção de biodiesel por transesterificação em dois estágios e sua caracterização por cromatografia gasosa: óleos e gorduras em laboratório de química orgânica

Methanolic transesterification of oils and fats was carried out in a two steps procedure, under basic and acidic catalysis. Palm, soybean, canola, corn, rice, grapeseed, sunflower, peanut, pequi and olive oils, besides tallow and lard were used as feedstock. Specific gravity, relative viscosity, thin layer chromatography and gas chromatography were used to characterize the biodiesel. Biodiesel was obtained in high yield and purity. Results were used to discuss the following key-concepts: 1 - triglycerides, composition and properties; 2 - nucleophilic acyl substitution under basic and acid conditions, 3 - thin layer chromatography, 4 - gas chromatography and its quantitative methods.

Síntese de poliuretanos modificados por óleo de mamona empregados em materiais energéticos

The aim of this work was to synthesize a polyurethane polymer matrix using castor oil as a polymer chain modifier, whose characteristics can be adjusted for use as a binder in the manufacture of energetic materials such as propellant and pyrotechnics for aerospace use. We attempted the partial substitution of hydroxyl-terminated polybutadiene (HTPB), a pre-polymer commonly used as a starting polyol in obtaining energetic matrix composites. Thermoanalytical techniques were employed to characterize the material based on castor oil and the unmodified HTPB. The results showed similar behaviors, confirming the possibility of their use as polymer matrix composites through the proposed adaptations.

Síntese e avaliação da atividade antimalárica de compostos derivados da curcumina

One of the main challenges in the development of new antimalarial drugs is to achieve a viable lead candidate with good pharmacokinetic properties. Curcumin has a broad range of biological activities, including antimalarial activity. Herein, we report the antimalarial activity of six curcumin derivatives (6-12) and an initial analysis of their pharmacokinetic properties. Five compounds have demonstrated potent activity against the P. falciparum in vitro (IC50 values ranging from 1.7 to 15.2 µg mL-1), with moderate or low cytotoxicity against the HeLa cell line. The substitution of the carbonyl group in 6 by a 2,4-dinitrophenylhydrazone group (to afford 11) increases the Selective Index. These preliminary results indicate curcumin derivatives as potential antimalarial compounds.

DIRECT INFUSION ESI-MS APPLIED IN THE DETECTION OF BYPRODUCTS DUE TO REDUCTIVE DEGRADATION OF ACETAMIPRID BY ZERO-VALENT IRON

This study investigated the reductive degradation of acetamiprid (5 mg L-1) in aqueous medium (at pH 2.0) induced by zero-valent iron (50 mg). The process was monitored using high-performance liquid chromatography (HPLC) to determine the degradation rate as a function of reaction time, and direct infusion electrospray ionization mass spectrometry (DI-ESI-MS) to search for (and potentially characterize) any possible byproducts formed during degradation. The results obtained via HPLC showed that after 60 min, the degradation of the substrate reached nearly 100% in an acidic medium, whereas the mineralization rate (as determined by total organic carbon measurements) was as low as 3%. Data obtained by DI-ESI-MS showed that byproducts were formed mainly by insertions of hydrogen atoms into the nitrile, imine, and pyridine ring moieties, in addition to the observation of chlorine substitution by hydrogen replacement (hydrodechlorination) reactions.

UM MÉTODO EFICIENTE PARA A OBTENÇÃO DE DERIVADOS DE 1-ALQUILAMINO-2,4-DINITROBENZENO E A REDUÇÃO REGIOSSELETIVA PARA A OBTENÇÃO DE DERIVADOS DE 1-ALQUILAMINO-2-AMINO-4-NITROBENZENO

Both primary and secondary amines react with 2,4-dinitrochlorobenzene to give derivatives of 1-alkylamino-2,4-dinitrobenzene. These compounds are important intermediates for the synthesis of a diverse range of products. The methodology reported in the present study involves either the room temperature reaction or heating at 70 °C in ethanol in the presence of triethylamine. This transformation occurs via a nucleophilic substitution reaction. The 1-alkylamino-2,4-dinitrobenzene derivatives were obtained in greater than 90% purified yield. The selective reduction of dinitro compounds is an important synthetic strategy for the synthesis of intermediates for dyes, pharmaceuticals and agrochemicals. The use of SnCl2 as a suspension in EtOAc is a promising method for the regio- and chemo-selective reduction of 1-alkylamino-2,4-dinitrobenzenes to 1-alkylamino-2-amino-4-nitrobenzenes. These products are useful intermediates in organic synthesis.

Utilization of retention chemicals in non-wood containing furnishes

The usage of the non-wood pulps in furnishes for various paper grades is the real alternative for substitution of wood fibres in the papermaking. This is especially important now, when the prices for wood are increasing and forest resources are depleting in many regions of our planet. However, there are several problems associated with utilization of such pulps. In terms of the papermaking process one of the main problems is the poor dewatering of the non-wood pulps. This problem can be partially solved by means of retention aids. In the literature part were described technological features of the non-wood pulps as the raw materials for paper production. Moreover, overviews of the retention chemicals and methods for retention measurement were done; special attention was paid to the mechanisms of retention and drainage. Finally, factors affecting on the drainage and retention of non-wood pulps were considered holistically. Particular emphasis was put on the possibility of enzyme treatment for drainage improvement. It was stated that retention aids can significantly improve dewatering of non-wood pulps. In the experimental part the goal was to investigate influence of various microparticle retention aids on the drainage, retention and formation of furnish containing wheat straw pulp, obtained by novel pulping process (Formico™Fib). The parallel test were performed with reference furnish containing only wood pulps. It was found that Bentonite-CPAM retention aid can significantly improve drainage and retention; however formation seems be suffer from such additives. It was stated that performance of the Silica-Starch retention aid significantly depends on the starch dosing sequence and wet-end conditions; this system have shown better formation than other tested retention aids. Silica-CPAM retention aid have provided comparable results in retention and drainage with Bentonite-CPAM, while Silica-starch did not improve dewatering and yielded in lowest filler retention among other aids. Ultimately, optimal dosages for the tested retention chemicals have been suggested.

Maksullisen verkkopalvelun konsepti mediayhtiölle

Mediayhtiöt miettivät keinoja joilla saataisiin lukijat maksamaan myös verkkopalveluihin julkaistavista sisällöistä. Tässä tutkimuksessa selvitettiin tilaajapohjaisen maksullisen verkkopalvelu-mallin soveltuvuutta Talentum Media Oy:lle sekä kehitettiin yritykselle maksavia asiakkaita houkuttelevan sisältötuotteen konsepti. Tutkimuksessa ei ilmennyt syitä, joiden takia yrityksen olisi syytä lykätä maksullisen verkkopalvelun kehittämistä. Perinteistä lehteä ja sen verkkopalvelua ei kannata nähdä toistensa kilpailijoina. Käyttäjät ovat yhä valmiimpia maksamaan sisällöstä verkossa, kun se on järjestelty houkutteleviksi kokonaisuuksiksi ja paketoitu oikein, sekä kun he säästävät aikaa tai vaivaa verkkopalvelun käytöllä. Verkkopalvelun muuntaminen maksulliseksi on kuitenkin suunniteltava erittäin tarkkaan, muuten käyttäjät saattavat siirtyä ilmaisiin palveluihin. Talentumin verkkopalveluiden käyttäjille tehdyn kyselytutkimuksen mukaan yrityksen verkkopalveluiden käyttäjät maksaisivat mieluiten verkkokoulutuksista, erityisraporteista ja tutkivasta journalismista, ammattikirjojen tiivistelmistä, opastavista tietopaketeista, pörssi- ja yritystiedosta sekä näköislehdistä. Tutkimuksessa kehitettiin maksullisen verkkopalvelun konsepti, joka tarjoaa lukijoille itsensä kehittämisen välineitä sekä informaatiota nopeasti ja vaivattomasti heidän haluamaansa aikaan ja valitsemallaan päätelaitteella. Konseptia seuraavan tuotekehityshankkeen tuloksena syntyvästä verkkopalvelusta odotetaan saatavan merkittävää lisäliikevaihtoa yrityksen online-toiminnoille.

L'ontologie chez Heidegger et chez Lukacs - Phénoménologie et dialectique

L'auteur de ce texte a abordé auparavant à plusieurs reprises le sujet d'une confrontation entre les pensées de Heidegger et de Lukacs. Il est parti de l'idée qu'ils existent des motifs communs entre les deux pensées, par exemple le thème de l'aliénation et celui de la réification, et il a publié deux articles dans ce sens. Le texte publié ici poursuit un objectif plus ambitieux, car il se propose de remonter aux fondements ontologiques des deux pensées et confronter Heidegger et Lukacs à partir de leur opposition sur pluseurs questions philosophiques cruciales : l'autonomie ontologique du monde extérieur, la définition du concept de "monde", la "subjectivité du sujet" et la humanitas de l'homo humanus, la critique lukacsienne du concept heideggérien d'"être-jeté..." (Geworfenheit),la problématique de la finitude et de l'infini,etc. La thèse centrale de l'article est l'occultation par Heidegger du travail comme "phénomène originaire" de l'existence humaine et sa substitution par une catégorie affective: le "Souci" (die Sorge), tandis que Lukacs a construit son ontologie de l'être social, en suivant Hegel et Marx, sur l'idée du travail comme pivot de l'existence humaine. La partie finale du texte désigne plusieurs motifs de la pensée heideggérienne (la critique de la pensée sécurisante, par ex.) qui préfigurent l'adhésion du philosophe à l'extrême droite de l'époque, ce qui confirme la thèse de Lukacs formulée dans son livre La Destruction de la Raison sur le caractère "pré-fasciste" de certaines orientations de la philosophie heideggérienne à l'époque qui asuccédé à son livre fameux Être et Temps.

Lääkevaihdon ja viitehintajärjestelmän vaikutukset patenttisuojattujen lääkevalmisteiden kohtuullisen tukkuhinnan vahvistamismenettelyyn

Pro gradu-tutkielman ensisijaisena tavoitteena oli selvittää, millaisia muutoksia lääkevaihto ja lääkkeiden viitehintajärjestelmä ovat aiheuttaneet patenttisuojattujen lääkevalmisteiden kohtuullisen tukkuhinnan vahvista-mismenettelyyn. Tätä menettelyä koskevat säännökset sisältyvät sairausvakuutuslain 6. lukuun, joten tutkimuksessa pyrittiin selvittämään kyseisen luvun soveltamista ja siinä mahdollisesti tapahtuneita muutoksia. Lääkevaihto otettiin Suomessa käyttöön 1.4.2003 ja viitehintajärjestelmä 1.4.2009. Lääkevalmisteiden hinnat ovat laskeneet niiden myötä merkittävästi. Tutkimusaineiston muodostivat 241 lääkkeiden hintalautakunnan sairausvakuutuskorvattavuutta ja kohtuullista tukkuhintaa koskevaa päätöstä vuosilta 2000-2010. Lisäksi käytössä oli muita päätöksiin liittyviä dokumentteja. Tutkimusaineisto lääkevaihdon käyttöönottoa edeltäneeltä ajalta jäi niukaksi. Tutkimuksen keskeiset havainnot liittyvätkin nimenomaan viitehintajärjestelmän käyttöönottoon. Nämä havainnot kuvaavat sitä, millaiset muutokset kohtuullisen tukkuhinnan vahvistamisessa ovat johtaneet patenttisuojattujen lääkevalmisteiden hintojen laskuun.

Enhancing performance of paper coatings by tailor-made plastic pigments

The paper industry is constantly looking for new ideas for improving paper products while competition and raw material prices are increasing. Many paper products are pigment coated. Coating layer is the top layer of paper, thus by modifying coating pigment also the paper itself can be altered and value added to the final product. In this thesis, synthesis of new plastic and hybrid pigments and their performance in paper and paperboard coating is reported. Two types of plastic pigments were studied: core-shell latexes and solid beads of maleimide copolymers. Core-shell latexes with partially crosslinked hydrophilic polymer core of poly(n-butyl acrylate-co-methacrylic acid) and a hard hydrophobic polystyrene shell were prepared to improve the optical properties of coated paper. In addition, the effect of different crosslinkers was analyzed and the best overall performance was achieved by the use of ethylene glycol dimethacrylate (EGDMA). Furthermore, the possibility to modify core-shell latex was investigated by introducing a new polymerizable optical brightening agent, 1-[(4-vinylphenoxy)methyl]-4-(2-henylethylenyl)benzene which gave promising results. The prepared core-shell latex pigments performed smoothly also in pilot coating and printing trials. The results demonstrated that by optimizing polymer composition, the optical and surface properties of coated paper can be significantly enhanced. The optimal reaction conditions were established for thermal imidization of poly(styrene-co-maleimide) (SMI) and poly(octadecene-co-maleimide) (OMI) from respective maleic anhydride copolymer precursors and ammonia in a solvent free process. The obtained aqueous dispersions of nanoparticle copolymers exhibited glass transition temperatures (Tg) between 140-170ºC and particle sizes from 50-230 nm. Furthermore, the maleimide copolymers were evaluated in paperboard coating as additional pigments. The maleimide copolymer nanoparticles were partly imbedded into the porous coating structure and therefore the full potential of optical property enhancement for paperboard was not achieved by this method. The possibility to modify maleimide copolymers was also studied. Modifications were carried out via N-substitution by replacing part of the ammonia in the imidization reaction with amines, such as triacetonediamine (TAD), aspartic acid (ASP) and fluorinated amines (2,2,2- trifluoroethylamine, TFEA and 2,2,3,3,4,4,4-heptafluorobuthylamine, HFBA). The obtained functional nanoparticles varied in size between 50-217 nm and their Tg from 150-180ºC. During the coating process the produced plastic pigments exhibited good runnability. No significant improvements were achieved in light stability with TAD modified copolymers whereas nanoparticles modified with aspartic acid and those containing fluorinated groups showed the desired changes in surface properties of the coated paperboard. Finally, reports on preliminary studies with organic-inorganic hybrids are presented. The hybrids prepared by an in situ polymerization reaction consisted of 30 wt% poly(styrene- co-maleimide) (SMI) and high levels of 70 wt% inorganic components of kaolin and/or alumina trihydrate. Scanning Electron Microscopy (SEM) images and characterization by Fourier Transform Infrared Spcetroscopy (FTIR) and X-Ray Diffraction (XRD) revealed that the hybrids had conventional composite structure and inorganic components were covered with precipitated SMI nanoparticles attached to the surface via hydrogen bonding. In paper coating, the hybrids had a beneficial effect on increasing gloss levels.

Rainfall erosivity for the State of Rio de Janeiro estimated by artificial neural network

The Artificial Neural Networks (ANNs) are mathematical models method capable of estimating non-linear response plans. The advantage of these models is to present different responses of the statistical models. Thus, the objective of this study was to develop and to test ANNs for estimating rainfall erosivity index (EI30) as a function of the geographical location for the state of Rio de Janeiro, Brazil and generating a thematic visualization map. The characteristics of latitude, longitude e altitude using ANNs were acceptable to estimating EI30 and allowing visualization of the space variability of EI30. Thus, ANN is a potential option for the estimate of climatic variables in substitution to the traditional methods of interpolation.

Economic analysis of cashew early dwarf Crop BRS - 189 depending on water levels and doses of potassium fertilization

Water and fertilizer among the production factors are the elements that most restrict the production of cashew. The precise amount of these factors is essential to the success of the crop yield. This research aimed to determine the best factor-product ratio and analyze technical and economic indicators, of productivity of the cashew clone BRS 189 (Anacardium occidentale) to production factors water and potassium. The experiment was conducted from May 2009 to December 2009 in an experimental area of 56.0 m x 112.0 m in the irrigated Curu - Pentecoste, located in the municipality of Pentecoste, Ceará, Brazil. Production factors water (W) and potassium (K) were the independent variables and productivity (Y), the dependent variable. Ten statistical models that have proven satisfactory for obtaining production function were tested. The marginal rate of substitution was obtained through the ratio of the potassium marginal physical product and the water marginal physical product. The most suited model to the conditions of the experiment was the quadratic polynomial without intercept and interaction. Considering that the price of the water was 0.10 R$ mm -1, the price of the potassium 2.19 R$ kg -1 and the price of the cashew 0.60 R$ kg-1, the amounts of water and K2O to obtain the maximum net income were 6,349.1 L plant-1 of water and 128.7 g plant -1year, -1 respectively. Substituting the values obtained in the production function, the maximum net income was achieved with a yield of 7,496.8 kg ha-1 of cashew.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Development of an environmentally friendly method of starch oxidation by hydrogen peroxide and a complex water-soluble Iron catalyst

Oxidized starch is a key component in the paper industry, where it is used as both surfacing sizer and filler. Large quantities are annually used for this purpose; however, the methods for the oxidation are not environmentally friendly. In our research, we have studied the possibility to replace the harmful oxidation agents, such as hypochlorite or iodates and transition metal catalysts, with a more environmentally friendly oxidant, hydrogen peroxide (H2O2), and a special metal complex catalyst (FePcS), of which only a small amount is needed. The work comprised batch and semi-batch studies by H2O2, ultrasound studies of starch particles, determination of low-molecular by-products and determination of the decomposition kinetics of H2O2 in the presence of starch and the catalyst. This resulted in a waste-free oxidation method, which only produces water and oxygen as side products. The starch oxidation was studied in both semi-batch and batch modes in respective to the oxidant (H2O2) addition. The semi-batch mode proved to yield a sufficient degree of substitution (COOH groups) for industrial purposes. Treatment of starch granules by ultrasound was found to improve the reactivity of starch. The kinetic results were found out to have a rather complex pattern – several oxidation phases were observed, apparently due to the fact that the oxidation reaction in the beginning only took place on the surface, whereas after a prolonged reaction time, partial degradation of the solid starch granules allowed further reaction in the interior parts. Batch-mode experiments enabled a more detailed study of the mechanisms of starch in the presence of H2O2 and the catalyst, but yielded less oxidized starch due to rapid decomposition of H2O2 due to its high concentrations. The effect of the solid-liquid (S/L) ratio in the reaction system was studied in batch experiments. These studies revealed that the presence of the catalyst and the starch enhance the H2O2 decomposition.

A phylogenetic study of canine parvovirus type 2c in midwestern Brazil

Since the late 1970s, canine parvovirus type 2 (CPV-2) has emerged as a causative agent of fatal severe acute hemorrhagic enteritis in dogs. To date, three antigenic types of CPV-2 were described worldwide (CPV-2a/b/c). This study was conducted to determine the variants of CPV-2 circulating in dogs from the Cuiabá Municipality in Midwestern Brazil. Out of 50 fecal samples, collected between 2009 and 2011, 27 tested positive for CPV-2. A 583 bp fragment of the VP2 gene was amplified by PCR, 13 representative samples were analyzed further by DNA sequencing. All strains were characterized as CPV-2c, displayed a low genetic variability although observed several amino acid substitution. These findings indicated that CPV-2c has been circulating in dogs from the Cuiabá Municipality in Midwestern Brazil.