High-resolution physical mapping by combined Alu-hybridization/PCR screening: construction of a yeast artificial chromosome map covering 31 centimorgans in 3p21-p14.

We describe an integrated approach to large-scale physical mapping using an Alu-PCR hybridization screening strategy in conjunction with direct PCR-based screening to construct a continuous yeast artificial chromosome map covering >20 mb in human chromosome 3, bands p14-p21, composed of 205 loci, connected by 480 yeast artificial chromosomes, with average interlocus distance of approximately equal to 100 kb. We observe an inverse distribution of Alu-PCR and (CA)n markers. These results suggest that the two screening methods may be complementary and demonstrate the utility of Alu-PCR hybridization screening in the closure of high-resolution human physical maps.

Neurotrophins stimulate phosphorylation of synapsin I by MAP kinase and regulate synapsin I-actin interactions.

The ability of neurotrophins to modulate the survival and differentiation of neuronal populations involves the Trk/MAP (mitogen-activated protein kinase) kinase signaling pathway. More recently, neurotrophins have also been shown to regulate synaptic transmission. The synapsins are a family of neuron-specific phosphoproteins that play a role in regulation of neurotransmitter release, in axonal elongation, and in formation and maintenance of synaptic contacts. We report here that synapsin I is a downstream effector for the neurotrophin/Trk/MAP kinase cascade. Using purified components, we show that MAP kinase stoichiometrically phosphorylated synapsin I at three sites (Ser-62, Ser-67, and Ser-549). Phosphorylation of these sites was detected in rat brain homogenates, in cultured cerebrocortical neurons, and in isolated presynaptic terminals. Brain-derived neurotrophic factor and nerve growth factor upregulated phosphorylation of synapsin I at MAP kinase-dependent sites in intact cerebrocortical neurons and PC12 cells, respectively, while KCl- induced depolarization of cultured neurons decreased the phosphorylation state at these sites. MAP kinase-dependent phosphorylation of synapsin I significantly reduced its ability to promote G-actin polymerization and to bundle actin filaments. The results suggest that MAP kinase-dependent phosphorylation of synapsin I may contribute to the modulation of synaptic plasticity by neurotrophins and by other signaling pathways that converge at the level of MAP kinase activation.

An integrated map of the genome of the tubercle bacillus, Mycobacterium tuberculosis H37Rv, and comparison with Mycobacterium leprae.

An integrated map of the genome of the tubercle bacillus, Mycobacterium tuberculosis, was constructed by using a twin-pronged approach. Pulsed-field gel electrophoretic analysis enabled cleavage sites for Asn I and Dra I to be positioned on the 4.4-Mb circular chromosome, while, in parallel, clones from two cosmid libraries were ordered into contigs by means of fingerprinting and hybridization mapping. The resultant contig map was readily correlated with the physical map of the genome via the landmarked restriction sites. Over 165 genes and markers were localized on the integrated map, thus enabling comparisons with the leprosy bacillus, Mycobacterium leprae, to be undertaken. Mycobacterial genomes appear to have evolved as mosaic structures since extended segments with conserved gene order and organization are interspersed with different flanking regions. Repetitive sequences and insertion elements are highly abundant in M. tuberculosis, but the distribution of IS6110 is apparently nonrandom.

A high-resolution physical map of human chromosome 11.

The development of a highly reliable physical map with landmark sites spaced an average of 100 kbp apart has been a central goal of the Human Genome Project. We have approached the physical mapping of human chromosome 11 with this goal as a primary target. We have focused on strategies that would utilize yeast artificial chromosome (YAC) technology, thus permitting long-range coverage of hundreds of kilobases of genomic DNA, yet we sought to minimize the ambiguities inherent in the use of this technology, particularly the occurrence of chimeric genomic DNA clones. This was achieved through the development of a chromosome 11-specific YAC library from a human somatic cell hybrid line that has retained chromosome 11 as its sole human component.To maximize the efficiency of YAC contig assembly and extension, we have employed an Alu-PCR-based hybridization screening system. This system eliminates many of the more costly and time-consuming steps associated with sequence tagged site content mapping such as sequencing, primer production, and hierarchical screening, resulting in greater efficiency with increased throughput and reduced cost. Using these approaches, we have achieved YAC coverage for >90% of human chromosome 11, with an average intermarker distance of <100 kbp. Cytogenetic localization has been determined for each contig by fluorescent in situ hybridization and/or sequence tagged site content. The YAC contigs that we have generated should provide a robust framework to move forward to sequence-ready templates for the sequencing efforts of the Human Genome Project as well as more focused positional cloning on chromosome 11.

A compositional map of human chromosome band Xq28.

The molar fractions of guanine plus cytosine (GC) in DNA were determined for 36 yeast artificial chromosomes (YACs) which almost completely cover human chromosome band Xq28, a terminal reverse band, corresponding to about 8 Mb of DNA. This allowed the construction of the most complete compositional map to date of a chromosomal band; three regions were observed: (i) a proximal 3.5-Mb region formed by GC-poor L and GC-rich H1 isochores; (ii) a middle 2,2-Mb region essentially formed by a GC-rich H2 isochore and a very GC-rich H3 isochore separated by a GC-poor L isochore, YACs from this region being characterized by a striking compositional heterogeneity and instability; and (iii) a distal 1.3-Mb region exclusively formed by GC-poor L isochores. Gene and CpG island concentrations increased with the GC levels of the isochores, as expected. Xq28 exemplifies a subset of reverse bands which are different from the two other subsets, namely from telomeric bands, which are characterized by specific cytogenetic properties and by the predominance of H2 and H3 isochores, and from the majority of reverse bands, which do not contain H2 and H3 isochores.

A high-resolution annotated physical map of the human chromosome 13q12-13 region containing the breast cancer susceptibility locus BRCA2.

Various types of physical mapping data were assembled by developing a set of computer programs (Integrated Mapping Package) to derive a detailed, annotated map of a 4-Mb region of human chromosome 13 that includes the BRCA2 locus. The final assembly consists of a yeast artificial chromosome (YAC) contig with 42 members spanning the 13q12-13 region and aligned contigs of 399 cosmids established by cross-hybridization between the cosmids, which were selected from a chromosome 13-specific cosmid library using inter-Alu PCR probes from the YACs. The end sequences of 60 cosmids spaced nearly evenly across the map were used to generate sequence-tagged sites (STSs), which were mapped to the YACs by PCR. A contig framework was generated by STS content mapping, and the map was assembled on this scaffold. Additional annotation was provided by 72 expressed sequences and 10 genetic markers that were positioned on the map by hybridization to cosmids.

Parvovirus B19 promoter at map unit 6 confers autonomous replication competence and erythroid specificity to adeno-associated virus 2 in primary human hematopoietic progenitor cells.

The pathogenic human parvovirus B19 is an autonomously replicating virus with a remarkable tropism for human erythroid progenitor cells. Although the target cell specificity for B19 infection has been suggested to be mediated by the erythrocyte P-antigen receptor (globoside), a number of nonerythroid cells that express this receptor are nonpermissive for B19 replication. To directly test the role of expression from the B19 promoter at map unit 6 (B19p6) in the erythroid cell specificity of B19, we constructed a recombinant adeno-associated virus 2 (AAV), in which the authentic AAV promoter at map unit 5 (AAVp5) was replaced by the B19p6 promoter. Although the wild-type (wt) AAV requires a helper virus for its optimal replication, we hypothesized that inserting the B19p6 promoter in a recombinant AAV would permit autonomous viral replication, but only in erythroid progenitor cells. In this report, we provide evidence that the B19p6 promoter is necessary and sufficient to impart autonomous replication competence and erythroid specificity to AAV in primary human hematopoietic progenitor cells. Thus, expression from the B19p6 promoter plays an important role in post-P-antigen receptor erythroid-cell specificity of parvovirus B19. The AAV-B19 hybrid vector system may also prove to be useful in potential gene therapy of human hemoglobinopathies.

Genomic structure of human microtubule-associated protein 2 (MAP-2) and characterization of additional MAP-2 isoforms.

We have determined that the gene for human microtubule-associated protein 2 (MAP-2) spans 19 exons, including 6 exons identified in this study, 1-4, 8, and 13; all six of these exons are transcribed. The alternative splicing of coding exons generates a greater diversity of MAP-2 transcripts and isoforms. The first three exons encode alternate 5' untranslated regions that can be spliced to additional untranslated sequences contained in exons 4 and 5. Exons 8 and 13 are transcribed in human fetal spinal cord, adult brain, MSN cells, and rat brain, and each exon maintains an open reading frame with both high and low molecular weight MAP-2 isoforms. Antibodies generated to synthetic peptides of exons 8 and 13 demonstrate that these exons are translated and MAP-2 isoforms containing these exons are generated.

Transmission and Transport of Energy in the Western U.S. and Canada: A Law and Policy Road Map

This collection of short essays arose from the inaugural meeting of the Idaho Symposium on Energy in the West, which was held in November, 2014. The topic for this first Symposium was Transmission and Transport of Energy in the Western U.S. and Canada: A Law and Policy Road Map. The essays in this collection provide a notable introduction to the major energy issues facing the West today. Topics include: building a resilient legal architecture for western energy production; natural gas flaring; transmission planning for wind energy; utilities and rooftop solar; special considerations for western states and the Clean Power Plan; the Clean Power Plan's implications for the western grid; siting renewable energy on public lands; and implications of utility reform in New York and Hawaii for the Northwest.

3D model based map building

Comunicación presentada en el IX Workshop de Agentes Físicos (WAF'2008), Vigo, 11-12 septiembre 2008.

Subsidence activity maps derived from DInSAR data: Orihuela case study

A new methodology is proposed to produce subsidence activity maps based on the geostatistical analysis of persistent scatterer interferometry (PSI) data. PSI displacement measurements are interpolated based on conditional Sequential Gaussian Simulation (SGS) to calculate multiple equiprobable realizations of subsidence. The result from this process is a series of interpolated subsidence values, with an estimation of the spatial variability and a confidence level on the interpolation. These maps complement the PSI displacement map, improving the identification of wide subsiding areas at a regional scale. At a local scale, they can be used to identify buildings susceptible to suffer subsidence related damages. In order to do so, it is necessary to calculate the maximum differential settlement and the maximum angular distortion for each building of the study area. Based on PSI-derived parameters those buildings in which the serviceability limit state has been exceeded, and where in situ forensic analysis should be made, can be automatically identified. This methodology has been tested in the city of Orihuela (SE Spain) for the study of historical buildings damaged during the last two decades by subsidence due to aquifer overexploitation. The qualitative evaluation of the results from the methodology carried out in buildings where damages have been reported shows a success rate of 100%.

FFT Interpolation From Nonuniform Samples Lying in a Regular Grid

This paper presents a method to interpolate a periodic band-limited signal from its samples lying at nonuniform positions in a regular grid, which is based on the FFT and has the same complexity order as this last algorithm. This kind of interpolation is usually termed “the missing samples problem” in the literature, and there exists a wide variety of iterative and direct methods for its solution. The one presented in this paper is a direct method that exploits the properties of the so-called erasure polynomial and provides a significant improvement on the most efficient method in the literature, which seems to be the burst error recovery (BER) technique of Marvasti’s The paper includes numerical assessments of the method’s stability and complexity.

Rigorous design of distillation columns using surrogate models based on Kriging interpolation

The economic design of a distillation column or distillation sequences is a challenging problem that has been addressed by superstructure approaches. However, these methods have not been widely used because they lead to mixed-integer nonlinear programs that are hard to solve, and require complex initialization procedures. In this article, we propose to address this challenging problem by substituting the distillation columns by Kriging-based surrogate models generated via state of the art distillation models. We study different columns with increasing difficulty, and show that it is possible to get accurate Kriging-based surrogate models. The optimization strategy ensures that convergence to a local optimum is guaranteed for numerical noise-free models. For distillation columns (slightly noisy systems), Karush–Kuhn–Tucker optimality conditions cannot be tested directly on the actual model, but still we can guarantee a local minimum in a trust region of the surrogate model that contains the actual local minimum.

Regional subsidence modelling in Murcia city (SE Spain) using 1-D vertical finite element analysis and 2-D interpolation of ground surface displacements

Subsidence is a hazard that may have natural or anthropogenic origin causing important economic losses. The area of Murcia city (SE Spain) has been affected by subsidence due to groundwater overexploitation since the year 1992. The main observed historical piezometric level declines occurred in the periods 1982–1984, 1992–1995 and 2004–2008 and showed a close correlation with the temporal evolution of ground displacements. Since 2008, the pressure recovery in the aquifer has led to an uplift of the ground surface that has been detected by the extensometers. In the present work an elastic hydro-mechanical finite element code has been used to compute the subsidence time series for 24 geotechnical boreholes, prescribing the measured groundwater table evolution. The achieved results have been compared with the displacements estimated through an advanced DInSAR technique and measured by the extensometers. These spatio-temporal comparisons have showed that, in spite of the limited geomechanical data available, the model has turned out to satisfactorily reproduce the subsidence phenomenon affecting Murcia City. The model will allow the prediction of future induced deformations and the consequences of any piezometric level variation in the study area.

Optimization of Chemical Processes Using Surrogate Models Based on a Kriging Interpolation

Superstructure approaches are the solution to the difficult problem which involves the rigorous economic design of a distillation column. These methods require complex initialization procedures and they are hard to solve. For this reason, these methods have not been extensively used. In this work, we present a methodology for the rigorous optimization of chemical processes implemented on a commercial simulator using surrogate models based on a kriging interpolation. Several examples were studied, but in this paper, we perform the optimization of a superstructure for a non-sharp separation to show the efficiency and effectiveness of the method. Noteworthy that it is possible to get surrogate models accurate enough with up to seven degrees of freedom.