GPS performance in the quantification of integrated water vapor in Amazonian regions

The Amazonian regions are characterized by large space-time variability in the humidity fields due to the intense convective process in those areas associated with the great humidity potential generated by high temperatures. An experiment denominated RACCI/DRY-TO-WET (RAdiation, Cloud, and Climate Interactions in the Amazonia during the DRY-TO-WET Transition Season) was carried out in the Brazilian Amazonian Region in 2002. The IWV values from GPS and other techniques, such as radiosondes, radiometer and humidity sounding satellites were used in this experiment to supply subsidies to evaluate the aerosols influence in the associated processes modifications to seasonality of atmospheric water vapor. Those regions are one of the most humid of the planet, where IWV (Integrated Water Vapor) average values are in the order of 50 kg/m2. As according the literature the IWV quantification using GPS has not been explored in those circumstances, the objective this paper is to present the preliminary results obtained in the evaluation of the GPS performance in Amazonian Regions when comparing with other techniques. The tendency measurement values indicated that the IWV values from GPS tend to be larger than those from radiosondes and smaller than those from radiometer. On the other hand, IWV values from GPS are very close of the average values supplied by radiosondes and radiometer. Due to the great amount of atmospheric water vapor existent in this region, the results obtained in the experiment in percentile terms are quite better than those found in the literature, which are around of 10%.

Effects of copper vapor laser radiation on the root canal wall of human teeth: A scanning electron microscope study

Objective: The aim of this study is to analyze the effects of copper vapor laser radiation on the radicular wall of human teeth. Materials and Methods: Immediately after the crowns of 10 human uniradicular teeth were cut along the cement-enamel junction, a chemical-surgical preparation of the radicular canals was completed. Then the roots were longitudinally sectioned to allow for irradiation of the surfaces of the dentin walls of the root canals. The hemi-roots were separated into two groups: one (control) with five hemi-roots that were not irradiated, and another (experimental) with 15 hemi-roots divided into three subgroups that were submitted to the following exposure times: 0.02,0.05, and 0.1 s. A copper vapor laser (510.6 nm) with a total average power of 6.5 W in green emission, frequency of 16.000 Hz, and pulse duration of 30 ns was used. Results: The results obtained by scanning electron microscope analysis showed the appearance of a cavity in the region of laser beam impact, with melting, recrystallization, and cracking on the edges of the dentin of the cavity due to heat diffusion. Conclusions: We determined that the copper vapor laser produces significant morphologic changes in the radicular wall of human teeth when using the parameters in this study. However, further research should be done to establish parameters that are compatible with dental structure in order to eliminate thermal damages. © Mary Ann Liebert, Inc.

Incidência de malformações congênitas em crianças concebidas através de injeção intracitoplasmática de espermatozóides

Purpose: to evaluate the incidence and types of major congenital malformations (MCM) in liveborn children conceived by intracytoplasmic sperm injection (ICSI). Methods: a total of 680 liveborn children resulted from 511 couples submitted to ICSI from January, 1999 to December, 2002. Data collection of the children was performed through standardized questionnaire and clinical examination. Of the 511 couples, 366 had been contacted for a sampling of 371 gestations. Of the 680 liveborn, 520 had been evaluated, 250 of them (48.1%) through questionnaire and 270 (51.9%) through questionnaire and physical examination. Two hundred and fifty children were from singleton pregnancies and 270 from multiple pregnancies. Malformations were classified according to the 10th revision of the International Statistical Classification of Diseases and Related Health. Only MCM were analyzed in this study. The incidence of MCM was compared with that of the general population obtained by the Latin American Collaborative Study of Congenital Malformations. The statistical analysis was performed by the χ 2 test (level of significance p<0.05). Results: of the 520 children, 15 presented MCM, resulting in an incidence of 2.9%. There was no difference in relation to the control group (p>0.05), which showed 2.6% incidence of MCM. The most frequent malformations were of cardiac origin (four isolated and two associated), corresponding to 40% of the total. The other types of MCM were: renal (three), neural tube (two), skull (one), cleft lip (one), genital (one), Down syndrome (associated with cardiac malformations) (two), and musculoskeletal (one). Six MCM occurred in children from singleton pregnancies and nine in children from multiple pregnancies. Conclusion: the liveborn children conceived by ICSI presented incidence of major congenital malformations (2.9%) near to the expected for the general population (2.6%). However, to establish the risks of MCM with precision it is necessary to continue the evaluation of the children conceived by ICSI.

Injeção epidural de cetamina ou cetamina levógira no controle da dor pós-incisional, em eqüinos

The aim of this study was to evaluate the pre-emptive effect of epidural ketamine S (+) (SK) or racemic ketamine (RK) administration, in post-incisional pain in horses. Were used in a blinded, randomized experimental study, sixteen mixed breed mares, 6±2 years old, weighting 273.2±42.0 kg. An epidural catheter was inserted 24 hours before the trials. The thigh region was shaved bilaterally, and mechanical cutaneous sensibility was measured using von Frey filaments (T-30). Using the left side as the control one, local anesthesia was performed at the right side. Twenty-five minutes later, SK was injected in G1 or RK in G2 through the epidural catheter. Five minutes after the ketamine injection, a 10 cm skin incision was made on the right side, and then sutured. Mechanical post-incisional pain was measured using von Frey filaments, at 1, 3 and 5 cm around the incision at 15 minutes intervals, for 2 hours, then 4, 6 and 8 hours after suturing. No changes were observed in the heart and respiratory rate and rectal temperature among groups or times of each group. Hind limb ataxia was observed in 62.5% and 12.5% of G1 and G2 respectively. SK and RK reduced cutaneous sensibility in the right and the left sides to mechanical postincisional pain during all time of experiment. Epidural SK and RK produce similar post-incisional analgesic effects, did not interfere in the cardio-respiratory parameters. The SK induces more intense ataxia in mares and presents a larger analgesic potency in the first 60 minutes after the administration.

Estudo comparativo experimental da injeção perineural do álcool benzílico 0,75% e do álcool etílico absoluto nos nervos palmares de eqüinos

The clinical and histopathological effects of two alcoholic neurolytics were studied in horses. Normal horses were shod with a designed shoe adaptted with 5 screws to produce solar pain. After gait and lameness score analysis, the palmar nerve of 5 horses was injected with 5 ml of 0,75% benzyl alcohol (Group A) and 5 horses were injected with 5 ml of absolute ethyl alcohol (Group B). The animals were submitted to regular lameness evaluation and solar sensibility tests during next six months. The solar sensitivity returned 5 months latter in the group injected with benzyl alcohol 0,75%, while in the group injected with absolute ethyl alcohol, the sole was still desensitized 6 months latter. The histopathological findings showed that the nerve injected with benzyl alcohol 0,75%, resulted in axonotmesis, characterized by axonal nerve degeneration, with possibilities for the nerve conduction recovery. The perineural injection of ethyl alcohol absolute, resulted in neurotmesis with difficult nerve regeneration. It was concluded that chemical neurolysis with alcohol is an option for temporary or permanent nerve blocks in horses.

Stacking faults in SiCf/SiC composite obtained by chemical vapor reaction process

SiC fiber-reinforced SiC matrix composite (SiCf/SiC) is one of the leading candidates in ceramic materials for engineering applications due to its unique combination of properties such as high thermal conductivity, high resistance to corrosion and working conditions. Fiber-reinforced composites are materials which exhibit a significant improvement in properties like ductility in comparison to the monolithic SiC ceramic. The SiCf/SiC composite was obtained from a C/C composite precursor using convertion reaction under high temperature and controlled atmosphere. In this work, SiC phase presented the stacking faults in the structure, being not possible to calculate the unit cell size, symmetry and bond lengths but it seem equal card number 29-1129 of JCPDS.

Viabilidade econômica e seleção de sistemas de irrigação utilizando simulação e dominância estocástica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da execução de um algoritmo numérico cbs para simulação de escoamento utilizando elementos finitos

This work intends to analyze the application and execution time of a numerical algorithm that simulates incompressible and isothermal flows. It was used the explicit scheme of the Characteristic Based Split (CBS) algorithm and the Artificial Compressibility (AC) scheme for coupling pressure-velocity equations. The discretization was done with the finite element method using a bilinear elements grid. The free software GNU-Octave was used for implementation and execution of routines. The results were analyzed using the classic lid-driven cavity problem. This work shows results for tests with several Reynolds' number. The results for these tests show a good agreement when compared with previous ones obtained from bibliography. The code runtime's analysis shows yet that the matrix's assembly is the part of greater consumption time in the implementation.

Simulação da oferta e demanda de recursos hídricos nas bacias dos rios piracicaba, capivarí e jundiaí: Uma análise em dinâmica de sistemas

A dynamic systems water resources simulation model was developed as a tool to help to analyze water resources management alternatives for the Piracicaba, Capivari and Jundiaí River Water Basins (BH-PCJ). Different politics policy were simulated for 40-year. The model estimates water supply and demand, as well as contamination load from several consumers. Six runs were performed using average precipitation value, changing water supply and demand, and different volumes diverted from BH-PCJ to BH-Alto Tietê For the Business as Usual, the Sustainability Index went from 0.41 in 2010 to 0.22 by 2050; the Water Use Index changed from 80.7% in 2010, to 125.5% by 2050; and the Falkenmark Index changed from 1,302 m 3 person -1 year -1 in 2010 to 774 m 3 P -1 year -1 by 2050. It was noticed that sanitation is one of the biggest concerns in the near future at PCJ River Basin.

Avaliação de cargas difusas e simulação de autodepuração no Córrego da Água Branca, Itirapina (SP)

According to CONAMA Resolution No. 357, the Água Branca Creek is framed in Class 2 and along its course the characteristics should be consistent with this class. Evaluation of diffuse loads and simulation of auto-purification in the Água Branca Creek allowed evaluating the alterations in the quality of the freshwater. The major contribution of diffuse loads in the basin of the White Water Creek is related to agriculture. The QUAL2K modeling identified the autopurification zones at Água Branca Creek and indicated the necessity BDO removal of 75%.

Simulação de perdas de solo em função de cenários de adequação ambiental em microbacias agrícolas

In São Paulo state, deforestation and agriculture activities are increasing soil losses processes, especially in areas of susceptible soils where soil conservation practices are not adopted. Environmental adequacy at property level regarding Permanent Protection Areas and Legal Reserves is considered a potential factor for reducing soil losses and it was based on this fact that we assessed soil losses of different scenarios of environmental adequacy. Simulations of erosive processes were carried out in 15 catchments of the Corumbataí river basin, with different forest restoration scenarios, as well as the current situation of land use/ land cover. The scenarios include reforestation of Permanent Preservation Areas (PPA); the reforestation hydrological sensitive areas; and two scenarios, the Legal Reserve installation in 20% of each catchment, being one of them for most critical areas in terms of erosion and the other at random. It was observed that the establishment of PPA and the reforestation of hydrological sensitive areas (HSA), offered a small contribution to the control of the erosive process, resulting in a reduction of 10% and 7.4%, respectively, while the legal reserve in critical areas has the significant reduction of 69.8%. The random scenario, in turn, resulted in a reduction of 21.4% of erosion. Results show that reforestation can reduce soil losses, but previous studies of land prioritization and planning could significantly increase its efficiency.

Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition

Diverse amorphous hydrogenated carbon-based films (a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:Si:O) were obtained by radiofrequency plasma enhanced chemical vapor deposition (PECVD) and plasma immersion ion implantation and deposition (PIIID). The same precursors were used in the production of each pair of each type of film, such as a-C:H, using both PECVD and PIIID. Optical properties, namely the refractive index, n, absorption coefficient, α, and optical gap, ETauc, of these films were obtained via transmission spectra in the ultraviolet-visible near-infrared range (wavelengths from 300 to 3300 nm). Film hardness, elastic modulus and stiffness were obtained as a function of depth using nano-indentation. Surface energy values were calculated from liquid drop contact angle data. Film roughness and morphology were assessed using atomic force microscopy (AFM). The PIIID films were usually thinner and possessed higher refractive indices than the PECVD films. Determined refractive indices are consistent with literature values for similar types of films. Values of ETauc were increased in the PIIID films compared to the PECVD films. An exception was the a-C:H:Si:O films, for which that obtained by PIIID was thicker and exhibited a decreased ETauc. The mechanical properties - hardness, elastic modulus and stiffness - of films produced by PECVD and PIIID generally present small differences. An interesting effect is the increase in the hardness of a-C:H:Cl films from 1.0 to 3.0 GPa when ion implantation is employed. Surface energy correlates well with surface roughness. The implanted films are usually smoother than those obtained by PECVD. ©2013 Elsevier B.V. All rights reserved.

Centrales de fuerza a vapor condiciones de dimensionado

Incluye Bibliografía

Simulação do caminhamento de herbicidas em diferentes tipos e quantidades de palhadas utilizadas no sistema de plantio direto

Pós-graduação em Agronomia (Agricultura) - FCA