The development of a modified dissolution method suitable for investigating powder mixtures

A novel dissolution method was developed, suitable for powder mixtures, based on the USP basket apparatus. The baskets were modified such that the powder mixtures were retained within the baskets and not dispersed, a potential difficulty that may arise when using conventional USP basket and paddle apparatus. The advantages of this method were that the components of the mixtures were maintained in close proximity, maximizing any drug:excipient interaction and leading to more linear dissolution profiles. Two weakly acidic model drugs, ibuprofen and acetaminophen, and a selection of pharmaceutical excipients, including potential dissolution-enhancing alkalizing agents, were chosen for investigation. Dissolution profiles were obtained for simple physical mixtures. The f1 fit factor values, calculated using pure drug as the reference material, demonstrated a trend in line with expectations, with several dissolution enhancers apparent for both drugs. Also, the dissolution rates were linear over substantial parts of the profiles. For both drugs, a rank order comparison between the f1 fit factor and calculated dissolution rate, obtained from the linear section of the dissolution profile, demonstrated a correlation using a significance level of P=0.05. The method was proven to be suitable for discriminating between the effects of excipients on the dissolution of the model drugs. The method design produced dissolution profiles where the dissolution rate was linear for a substantial time, allowing determination of the dissolution rate without mathematical transformation of the data. This method may be suitable as a preliminary excipient-screening tool in the drug formulation development process.

Practice report: the role of environmental factors in industrial site selection activities: a case of limestone quarry expansion in Barbados, West Indies

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-environmental factors. Adequate consideration of all factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, socio-environmental conditions were described and potential impacts identified. Third, a comparative matrix was constructed to evaluate relative site characteristics with respect to physical, ecological, socio-cultural and economic factors. The study shows that environmental factors were essential to the final site recommendation.

Managing risk in software development projects:a case study

Purpose - The main objective of the paper is to develop a risk management framework for software development projects from developers' perspective. Design/methodology/approach - This study uses a combined qualitative and quantitative technique with the active involvement of stakeholders in order to identify, analyze and respond to risks. The entire methodology has been explained using a case study on software development project in a public sector organization in Barbados. Findings - Analytical approach to managing risk in software development ensures effective delivery of projects to clients. Research limitations/implications - The proposed risk management framework has been applied to a single case. Practical implications - Software development projects are characterized by technical complexity, market and financial uncertainties and competent manpower availability. Therefore, successful project accomplishment depends on addressing those issues throughout the project phases. Effective risk management ensures the success of projects. Originality/value - There are several studies on managing risks in software development and information technology (IT) projects. Most of the studies identify and prioritize risks through empirical research in order to suggest mitigating measures. Although they are important to clients for future projects, these studies fail to provide any framework for risk management from software developers' perspective. Although a few studies introduced framework of risk management in software development, most of them are presented from clients' perspectives and very little effort has been made to integrate this with the software development cycle. As software developers absorb considerable amount of risks, an integrated framework for managing risks in software development from developers' perspective is needed. © Emerald Group Publishing Limited.

Industrial policy, FDI and employment:still a 'missing a strategy'

This paper contrasts the effects of trade, inward FDI and technological development upon the demand for skilled and unskilled workers in the UK. By focussing on industry level data panel data on smaller firms, the paper also contrasts these effects with those generated by large scale domestic investment. The analysis is placed within the broader context of shifts in British industrial policy, which has seen significant shifts from sectoral to horizontal measures and towards stressing the importance of SMEs, clusters and new technology, all delivered at the regional scale. This, however, is contrasted with continued elements of British and EU regional policy which have emphasised the attraction of inward investment in order to alleviate regional unemployment. The results suggest that such policies are not naturally compatible; that while both trade and FDI benefit skilled workers, they have adverse effects on the demand for unskilled labour in the UK. At the very least this suggests the need for a range of policies to tackle various targets (including in this case unemployment and social inclusion) and the need to integrate these into a coherent industrial strategy at various levels of governance, whether regional and/or national. This has important implications for the form of any 'new' industrial policy.

Foreign and domestic investment:regional development or crowding out?

This paper tests, at the regional and industry level, the extent to which domestic investment is stimulated or crowded out by inward foreign direct investment. The paper develops a model of domestic investment, based on standard models drawn from macroeconomics and industrial economics. The paper then goes on to show that, at a general level, the 'development' or agglomeration hypothesis is confirmed that domestic investment is indeed stimulated by inward investment. However, there is also evidence that, in certain regions, inward investment has crowded out domestic investment. The implications of this from the perspective of regional policy are briefly discussed.

Creation of relational assets through the 'library of equipment' model:an industrial modernization approach of Japan's local technology centres

SMEs with a weak internal R&D capacity show the tendency to shy away from using external sources of technical expertise. The tendency deters providers of industrial modernization services from supporting such structurally weak SMEs. This paper examines how Japan's local technology centres - kosetsushi - remove the bottleneck and reach out to a significant proportion of SMEs with a weak R&D capacity in their localities. Kosetsushi centres sustain habitual interactions with client firms through 'low information gap' services solving immediate needs and lead the clients to a riskier and longer path toward innovation capacity building. This gives kosetsushi centres a position distinct from universities and consultancies in the regional innovation system. While long-term relationships between kosetsushi centres and their client firms can increase switching costs and produce lock-in effects, a case study of two kosetsushi centres illustrates the importance of 'low-information gap' services and relational assets created thereby to the modernization of SMEs with a weak internal R&D capacity. The paper calls for long-term commitment by the public sector if it addresses the issue through modernization services.

Technology transfer to China:a study of strategy in 20 EU industrial companies

Foreign direct investment has been important in China's economic development since the early 1980s. In recent years, the volume of inward FDI into China, according to some estimates, has been second only to that into the USA. The Chinese government has emphasised the need for FDI to be coupled with the transfer of more advanced technologies to China. For foreign companies, technology transfer raises the risk of losing their technology based competitive advantage to potential competitor firms. This risk may be exacerbated by insufficient legal protection of intellectual property rights in China. After briefly reviewing the development of Chinese official policy on technology transfer, this paper considers the strategy adopted by EU companies regarding the transfer of technology; in particular in advanced technology sectors. The research on which the paper is based included an analysis of information gathered from 20 leading EU companies with investments in China and operating in high-technology sectors. Information was gathered from senior company managers based in both China and Europe during the second half of 1998. The main findings include a measure of reluctance on the part of EU companies to transfer their core technologies to China and to base R&D capability there. At the same time, the companies appear aware that this policy may be unsustainable in the longer-term in the face of Chinese official policy and a desire to expand their operations in China. While they attempt to protect their existing technological knowledge, most of them accept that there will be technology "leakage" and therefore the most effective strategy is to maintain their technological lead through R&D.

Go/no-go criteria during grocery brand development

Past research into new product screening criteria have largely centered on industrial new products. This study investigates the criteria that managers use for screening and evaluating new grocery products or brands. Theory suggests that the branding, promotional, and trade needs of grocery brands mean that screening criteria for grocery product development will differ from those applied to industrial goods. Our methodology departs from earlier research in gathering information on the accept/reject criteria during new product development rather than examining the reasons for success and failure after launch. The results endorse many findings from the extant literature on new product development. However, we highlight a set of factors that new product managers regard as important to the go/no-go decision in new grocery product or brand development that differs significantly from previous studies. From a research perspective, our study findings make an important contribution to the field by developing measurement scales for addressing NPD in the grocery sector.

How screening criteria change during brand development

Purpose - Despite the increasing sophistication of new product development (NPD) research, the reliance on traditional approaches to studying NPD has left several areas in need of further research. The authors propose addressing some of these gaps, especially the limited focus on consumer brands, evaluation criteria used across different project-review points in the NPD process, and the distinction between "kills", "successes", and "failures". Moreover, they propose investigating how screening criteria change across project-review points, using real-time NPD projects. Design/methodology/approach - A postal survey generated 172 usable questionnaires from a sample of European, North American, Far Eastern and Australian consumer packaged-goods firms, providing data on 314 new product projects covering different development and post-commercialization review points. Findings - The results confirm that acceptance-rejection criteria vary through the NPD process. However, financial criteria dominate across all the project-review points. Initial screening is coarse, focusing predominantly on financial criteria. Fit with organizational, product, brand, promotional, and market requirements dominate in the detailed screen and pre-development evaluation points. At pre-launch, decision-makers focus on product, brand, and promotional criteria. Commercial fit, production synergies, and reliability of the firm's market intelligence are significant discriminators in the post-launch review. Moreover, the importance of marketing and channel issues makes the criteria for screening brands different from those of industrial markets. Originality/value - The study, although largely descriptive and involves a relatively small sample of consumer goods firms, offers new insights into NPD project evaluation behavior. Future, larger-scale investigations covering a broader spectrum of consumer product sectors are needed to validate our results and to explain the reasons behind managers' decisions. © Emerald Group Publishing Limited.

Scenario planning:teaching how to anticipate perceived environmental uncertainty within strategy development

Scenario Planning is a strategy tool with growing popularity in both academia and practical situations. Current practices in the teaching of scenario planning are largely based on existing literature which utilises scenario planning to develop strategies for the future, primarily considering the assessment of perceived macro-external environmental uncertainties. However there is a body of literature hitherto ignored by scenario planning researchers, which suggests that Perceived Environmental Uncertainty (PEU) influences micro-external or industrial environmental as well as the internal environment of the organisation. This paper provides a review of the most dominant theories on scenario planning process, demonstrates the need to consider PEU theory within scenario planning and presents how this can be done. The scope of this paper is to enhance the scenario planning process as a tool taught for Strategy Development. A case vignette is developed based on published scenarios to demonstrate the potential utilisation of the proposed process.

Pragmatic approach to the development of robust real-time protocols

This research is concerned with the development of distributed real-time systems, in which software is used for the control of concurrent physical processes. These distributed control systems are required to periodically coordinate the operation of several autonomous physical processes, with the property of an atomic action. The implementation of this coordination must be fault-tolerant if the integrity of the system is to be maintained in the presence of processor or communication failures. Commit protocols have been widely used to provide this type of atomicity and ensure consistency in distributed computer systems. The objective of this research is the development of a class of robust commit protocols, applicable to the coordination of distributed real-time control systems. Extended forms of the standard two phase commit protocol, that provides fault-tolerant and real-time behaviour, were developed. Petri nets are used for the design of the distributed controllers, and to embed the commit protocol models within these controller designs. This composition of controller and protocol model allows the analysis of the complete system in a unified manner. A common problem for Petri net based techniques is that of state space explosion, a modular approach to both the design and analysis would help cope with this problem. Although extensions to Petri nets that allow module construction exist, generally the modularisation is restricted to the specification, and analysis must be performed on the (flat) detailed net. The Petri net designs for the type of distributed systems considered in this research are both large and complex. The top down, bottom up and hybrid synthesis techniques that are used to model large systems in Petri nets are considered. A hybrid approach to Petri net design for a restricted class of communicating processes is developed. Designs produced using this hybrid approach are modular and allow re-use of verified modules. In order to use this form of modular analysis, it is necessary to project an equivalent but reduced behaviour on the modules used. These projections conceal events local to modules that are not essential for the purpose of analysis. To generate the external behaviour, each firing sequence of the subnet is replaced by an atomic transition internal to the module, and the firing of these transitions transforms the input and output markings of the module. Thus local events are concealed through the projection of the external behaviour of modules. This hybrid design approach preserves properties of interest, such as boundedness and liveness, while the systematic concealment of local events allows the management of state space. The approach presented in this research is particularly suited to distributed systems, as the underlying communication model is used as the basis for the interconnection of modules in the design procedure. This hybrid approach is applied to Petri net based design and analysis of distributed controllers for two industrial applications that incorporate the robust, real-time commit protocols developed. Temporal Petri nets, which combine Petri nets and temporal logic, are used to capture and verify causal and temporal aspects of the designs in a unified manner.

A study on the flow characteristics of an industrial radiant tube burner

The thesis presents an experimentally validated modelling study of the flow of combustion air in an industrial radiant tube burner (RTB). The RTB is used typically in industrial heat treating furnaces. The work has been initiated because of the need for improvements in burner lifetime and performance which are related to the fluid mechanics of the com busting flow, and a fundamental understanding of this is therefore necessary. To achieve this, a detailed three-dimensional Computational Fluid Dynamics (CFD) model has been used, validated with experimental air flow, temperature and flue gas measurements. Initially, the work programme is presented and the theory behind RTB design and operation in addition to the theory behind swirling flows and methane combustion. NOx reduction techniques are discussed and numerical modelling of combusting flows is detailed in this section. The importance of turbulence, radiation and combustion modelling is highlighted, as well as the numerical schemes that incorporate discretization, finite volume theory and convergence. The study first focuses on the combustion air flow and its delivery to the combustion zone. An isothermal computational model was developed to allow the examination of the flow characteristics as it enters the burner and progresses through the various sections prior to the discharge face in the combustion area. Important features identified include the air recuperator swirler coil, the step ring, the primary/secondary air splitting flame tube and the fuel nozzle. It was revealed that the effectiveness of the air recuperator swirler is significantly compromised by the need for a generous assembly tolerance. Also, there is a substantial circumferential flow maldistribution introduced by the swirier, but that this is effectively removed by the positioning of a ring constriction in the downstream passage. Computations using the k-ε turbulence model show good agreement with experimentally measured velocity profiles in the combustion zone and proved the use of the modelling strategy prior to the combustion study. Reasonable mesh independence was obtained with 200,000 nodes. Agreement was poorer with the RNG  k-ε and Reynolds Stress models. The study continues to address the combustion process itself and the heat transfer process internal to the RTB. A series of combustion and radiation model configurations were developed and the optimum combination of the Eddy Dissipation (ED) combustion model and the Discrete Transfer (DT) radiation model was used successfully to validate a burner experimental test. The previously cold flow validated k-ε turbulence model was used and reasonable mesh independence was obtained with 300,000 nodes. The combination showed good agreement with temperature measurements in the inner and outer walls of the burner, as well as with flue gas composition measured at the exhaust. The inner tube wall temperature predictions validated the experimental measurements in the largest portion of the thermocouple locations, highlighting a small flame bias to one side, although the model slightly over predicts the temperatures towards the downstream end of the inner tube. NOx emissions were initially over predicted, however, the use of a combustion flame temperature limiting subroutine allowed convergence to the experimental value of 451 ppmv. With the validated model, the effectiveness of certain RTB features identified previously is analysed, and an analysis of the energy transfers throughout the burner is presented, to identify the dominant mechanisms in each region. The optimum turbulence-combustion-radiation model selection was then the baseline for further model development. One of these models, an eccentrically positioned flame tube model highlights the failure mode of the RTB during long term operation. Other models were developed to address NOx reduction and improvement of the flame profile in the burner combustion zone. These included a modified fuel nozzle design, with 12 circular section fuel ports, which demonstrates a longer and more symmetric flame, although with limited success in NOx reduction. In addition, a zero bypass swirler coil model was developed that highlights the effect of the stronger swirling combustion flow. A reduced diameter and a 20 mm forward displaced flame tube model shows limited success in NOx reduction; although the latter demonstrated improvements in the discharge face heat distribution and improvements in the flame symmetry. Finally, Flue Gas Recirculation (FGR) modelling attempts indicate the difficulty of the application of this NOx reduction technique in the Wellman RTB. Recommendations for further work are made that include design mitigations for the fuel nozzle and further burner modelling is suggested to improve computational validation. The introduction of fuel staging is proposed, as well as a modification in the inner tube to enhance the effect of FGR.

The development of a multi-function computer-assisted instruction system using a hierarchical database structure as the lesson compendium.

Computer-Based Learning systems of one sort or another have been in existence for almost 20 years, but they have yet to achieve real credibility within Commerce, Industry or Education. A variety of reasons could be postulated for this, typically: - cost - complexity - inefficiency - inflexibility - tedium Obviously different systems deserve different levels and types of criticism, but it still remains true that Computer-Based Learning (CBL) is falling significantly short of its potential. Experience of a small, but highly successful CBL system within a large, geographically distributed industry (the National Coal Board) prompted an investigation into currently available packages, the original intention being to purchase the most suitable software and run it on existing computer hardware, alongside existing software systems. It became apparent that none of the available CBL packages were suitable, and a decision was taken to develop an in-house Computer-Assisted Instruction system according to the following criteria: - cheap to run; - easy to author course material; - easy to use; - requires no computing knowledge to use (as either an author or student) ; - efficient in the use of computer resources; - has a comprehensive range of facilities at all levels. This thesis describes the initial investigation, resultant observations and the design, development and implementation of the SCHOOL system. One of the principal characteristics c£ SCHOOL is that it uses a hierarchical database structure for the storage of course material - thereby providing inherently a great deal of the power, flexibility and efficiency originally required. Trials using the SCHOOL system on IBM 303X series equipment are also detailed, along with proposed and current development work on what is essentially an operational CBL system within a large-scale Industrial environment.

An evaluation of task analysis techniques for industrial process control

The concept of a task is fundamental to the discipline of ergonomics. Approaches to the analysis of tasks began in the early 1900's. These approaches have evolved and developed to the present day, when there is a vast array of methods available. Some of these methods are specific to particular contexts or applications, others more general. However, whilst many of these analyses allow tasks to be examined in detail, they do not act as tools to aid the design process or the designer. The present thesis examines the use of task analysis in a process control context, and in particular the use of task analysis to specify operator information and display requirements in such systems. The first part of the thesis examines the theoretical aspect of task analysis and presents a review of the methods, issues and concepts relating to task analysis. A review of over 80 methods of task analysis was carried out to form a basis for the development of a task analysis method to specify operator information requirements in industrial process control contexts. Of the methods reviewed Hierarchical Task Analysis was selected to provide such a basis and developed to meet the criteria outlined for such a method of task analysis. The second section outlines the practical application and evolution of the developed task analysis method. Four case studies were used to examine the method in an empirical context. The case studies represent a range of plant contexts and types, both complex and more simple, batch and continuous and high risk and low risk processes. The theoretical and empirical issues are drawn together and a method developed to provide a task analysis technique to specify operator information requirements and to provide the first stages of a tool to aid the design of VDU displays for process control.

Industrial relations in the road passenger transport industry-a political-economic analysis.

This thesis examines the British Bus and Tram Industry from 1889 to 1988. The first determinant of the pattern of industrial relations is the development of the labour-process. The labour process changes with the introduction of new technology (electrified trams and mechanised buses), the concentration and centralisation of ownership, the decline of competition, changing market position, municipal and state regulation, ownership and control. The tram industry, as a consequence of electrification, is almost wholly municipally owned and the history of the labour process from horse-trams to the decline of the industry is examined. The bus industry has a less unified structure and is examined by sector; London, Municipal, and Territorial/Provincial. The small independent sector is largely ignored. The labour process is examined from the horse-bus to the present day. The development of resistance in the labour process is discussed both as a theoretical problematic (the `Braverman Debate') and through the process of unionisation, the centralisation and bureaucratisation of the unions, the development of national bargaining structures (National Joint Industrial Council and the National Council for the Omnibus Industry), and the development of resistance to those processes. This resistance takes either a syndicalist form, or under Communist Party leadership the form of rank and file movements, or simply unofficial organisations of branch officials. The process of centralisation of the unions, bureaucratisation and the institutionalisation of bargaining and the relationship between this process and the role of the Unions in the Labour Party is examined. Neo-corporatism, that is the increasing integration of the leadership of the main Union, the T.G.W.U.with the Labour Party and with the State is discussed. In theoretical terms, this thesis considers the debate around the notion of `labour process', the relationship between labour process and labour politics and between labour process and labour history. These relationships are placed within a discussion of class consciousness.