The employment situation in Latin America and the Caribbean: Advances and challenges in measuring decent work

At 6.4%, the unemployment rate for the Latin American and Caribbean region overall was the lowest for the past few decades, down from 6.7% in 2011. This is significant, in view of the difficult employment situation prevailing in other world regions. Labour market indicators improved despite modest growth of just 3.0% in the region’s economy. Even with sharply rising labour market participation, the number of urban unemployed fell by around 400,000, on the back of relatively strong job creation. Nevertheless, around 15 million are still jobless in the region. Other highlights of 2012 labour market performance were that the gender gaps in labour market participation, unemployment and employment narrowed, albeit slightly; formal employment increased; the hourly underemployment rate declined; and average wages rose. This rendering was obviously not homogenous across the region. Labour market indicators worsened again in the Caribbean countries, for example, reflecting the sluggish performance of their economies. The sustainability of recent labour market progress is also a cause for concern. Most of the new jobs in the region were created as part of a self-perpetuating cycle in which new jobs and higher real wages (and greater access to credit) have boosted household purchasing power and so pushed up domestic demand. Much of this demand is for non-tradable goods and services (and imports), which has stimulated expansion of the tertiary sector and hence its demand for labour, and many of the new jobs have therefore arisen in these sectors of the economy. This dynamic certainly has positive implications in terms of labour and distribution, but the concern is whether it is sustainable in a context of still relatively low investment (even after some recent gains) which is, moreover, not structured in a manner conducive to diversifying production. Doubt hangs over the future growth of production capacity in the region, given the enormous challenges facing the region in terms of innovation, education quality, infrastructure and productivity. As vigorous job creation has driven progress in reducing unemployment, attention has turned once again to the characteristics of that employment. Awareness exists in the region that economic growth is essential, but not in itself sufficient to generate more and better jobs. For some time, ILO has been drawing attention to the fact that it is not enough to create any sort of employment. The concept of decent work, as proposed by ILO, emphasized the need for quality jobs which enshrine respect for fundamental rights at work. The United Nations General Assembly endorsed this notion and incorporated it into the targets set in the framework of the Millennium Development Goals. This eighth issue of the ECLAC/ILO publication “The employment situation in Latin America and the Caribbean” examines how the concept of decent work has evolved in the region, progress in measuring it and the challenges involved in building a system of decent work indicators, 14 years after the concept was first proposed. Although the concept of decent work has been accompanied since the outset by the challenge of measurement, its first objective was to generate a discussion on the best achievable labour practices in each country. Accordingly, rather than defining a universal threshold of what could be considered decent work —regarding which developed countries might have almost reached the target before starting, while poor countries could be left hopelessly behind— ILO called upon the countries to define their own criteria and measurements for promoting decent work policies. As a result, there is no shared set of variables for measuring decent work applicable to all countries. The suggestion is, instead, that countries move forward with measuring decent work on the basis of their own priorities, using the information they have available now and in the future. However, this strategy of progressing according to the data available in each country tends to complicate statistical comparison between them. So, once the countries have developed their respective systems of decent work indicators, it will be also be important to work towards harmonizing them. ECLAC and ILO are available to provide technical support to this end. With respect to 2013, there is cautious optimism regarding the performance of the region’s labour markets. If projections of a slight uptick —to 3.5%— in the region’s economic growth in 2013 are borne out, labour indicators should continue to gradually improve. This will bring new increases in real wages and a slight drop of up to 0.2 percentage points in the region’s unemployment rate, reflecting a fresh rise in the regional employment rate and slower growth in labour market participation.

O sistema da ONU e as crianças-soldado: convergências e divergências nas abordagens sobre crianças e conflitos armados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Optimization of Large-Scale Hydrothermal System Operation

This paper presents the development of a mathematical model to optimize the management and operation of the Brazilian hydrothermal system. The system consists of a large set of individual hydropower plants and a set of aggregated thermal plants. The energy generated in the system is interconnected by a transmission network so it can be transmitted to centers of consumption throughout the country. The optimization model offered is capable of handling different types of constraints, such as interbasin water transfers, water supply for various purposes, and environmental requirements. Its overall objective is to produce energy to meet the country's demand at a minimum cost. Called HIDROTERM, the model integrates a database with basic hydrological and technical information to run the optimization model, and provides an interface to manage the input and output data. The optimization model uses the General Algebraic Modeling System (GAMS) package and can invoke different linear as well as nonlinear programming solvers. The optimization model was applied to the Brazilian hydrothermal system, one of the largest in the world. The system is divided into four subsystems with 127 active hydropower plants. Preliminary results under different scenarios of inflow, demand, and installed capacity demonstrate the efficiency and utility of the model. From this and other case studies in Brazil, the results indicate that the methodology developed is suitable to different applications, such as planning operation, capacity expansion, and operational rule studies, and trade-off analysis among multiple water users. DOI: 10.1061/(ASCE)WR.1943-5452.0000149. (C) 2012 American Society of Civil Engineers.

BDPI Digital Library of USP in intellectual production

USP INFORMATION MANDATE – Resolution 6444 – Oct. 22th, 2012 Make public and accessible the knowledge generated by research developed at USP, encouraging the sharing, the use and generation of new content; •Preserve institutional memory by storing the full text of Intellectual Production (scientific, academic, artistic and technical); •Increase the impact of the knowledge generated in the university within the scientific community and the general public; •It is suggested to all members of the USP community to publish the results of their research, preferably, in open-access publication outlets and/or repositories and to include the permission to deposit their production in the BDPI system in their publication agreements. •Institutional Repository for Intellectual Production; •Official Source USP Statistical Yearbook.

Reparation and enforcement of judgments : a comparative analysis of the European and Inter-American human rights systems

The inter-American human rights system has been conceived following the example of the European system under the European Convention on Human Rights (ECHR) before it was modified by Protocol No 11. However, two important differences exist. First, the authority of the European Court of Human Rights (ECtHR) to order reparation has been strictly limited by the principle of subsidiarity. Thus, the ECtHR's main function is to determine whether the ECHR has been violated. Beyond the declaratory effect of its judgments, according to Article 41 ECHR, it may only "afford just satisfaction to the injured party". The powers of the Inter-American Court of Human Rights (IACtHR) were conceived in a much broader fashion in Article 63 of the American Convention on Human Rights (ACHR), giving the Court the authority to order a variety of individual and general measures aimed at obtaining restitutio in integrum. The first main part of this thesis shows how both Courts have developed their reparation practice and examines the advantages and disadvantages of each approach. Secondly, the ECtHR's rather limited reparation powers have, interestingly, been combined with an elaborate implementation system that includes several of the Council of Europe's organs, principally the Committee of Ministers. In the Inter-American System, no dedicated mechanism was implemented to oversee compliance with the IACtHR's judgments. The ACHR limits itself to inviting the Court to point out in its annual reports the cases that have not been complied with and to propose measures to be adopted by the General Assembly of the Organization of American States. The General Assembly, however, hardly ever took action. The IACtHR has therefore filled this gap by developing a proper procedure to oversee compliance with its judgments. Both the European and the American solutions to ensure compliance are presented and compared in the second main part of this thesis. Finally, based on the results of both main parts, a comparative analysis of the reparation practice and the execution results in both human rights systems is being provided, aimed at developing proposals for the improvement of the functioning of either human rights protection system.

Parameterization of applied general equilibrium models with flexible trade specifications based on the Armington, Krugman, and Melitz models

This paper explains how the Armington-Krugman-Melitz supermodel developed by Dixon and Rimmer can be parameterized, and demonstrates that only two kinds of additional information are required in order to extend a standard trade model to include Melitz-type monopolistic competition and heterogeneous firms. Further, it is shown how specifying too much additional information leads to violations of the model constraints, necessitating adjustment and reconciliation of the data. Once a Melitz-type model is parameterized, a Krugman-type model can also be parameterized using the calibrated values in the Melitz-type model without any additional data. Sample code for the General Algebraic Modeling System (GAMS) has also been prepared to promote the innovative supermodel in the AGE community.

FMECA application to Rainfall Hazard prevention

This paper presents a System Safety application to reduce the economical impact hazards in growings produced by Rainfall. System Safety is an engineering subdiscipline oriented to identify and mitigate the possible hazards to a system under study. Inside the System Safety area, the FMECA (Failure Mode, Effects and Criticallity Analysis) is a popular tool to analyze and identify the failures and weaknesses points of any system. Basically, it consist on identifying systematically the failure modes of a system to mitigate them as much as possible. The idea is to study three different kind of growings (stone fruits in the south of Spain, wheat production in Castilla Leon and Olive trees production in Andalucia) using this methodology in order to identify all the hazardous situations produced by rainfall. Applying the state of the art weather forecast techniques, this information would help farmers to prevent and mitigate the identified hazardous situations. The aim of the work is to prevent the economical hazards as are defined in the System Safety area: "Any real or potential condition that can cause injury, illness, or death to personnel; damage to or loss of a system, equipment or property; or damage to the environment", so the study is not reduced to the analysis of catastrophical situations but aboutany kind of economical damage produced by rainfall.

Wind pumps for irrigating greenhouse crops

Agriculture is a major consumer of energy in many countries of the world. Only a few of these countries are self-sufficient in conventional energy sources, which are also exhaustible. Fortunately, there are other sources of energy, such as wind, which has experienced recent developments in the area of wind power generation. From irrigation projects to power supply in remote farms, wind power generation can play a vital role. A simple methodology for technical evaluation of windmills for irrigation water pumping has been developed in this study to determine the feasibility per unit amount of water supplied and the levels of daily irrigation demand satisfied by windmill irrigation system at various levels of risk (probability of failure). For this purpose, a series of three hourly wind-speed data over a period of 38 years at Ciego de Ávila, Cuba, were analyzed to compute the diurnal wind pump discharge at varying levels of risk. The sizes of reservoirs required to modulate fluctuating discharge and to satisfy the levels of irrigation demand, on function of crop development dates, cultivated area and water elevation height, were computed by cumulative deficit water budgeting. An example is given illustrating the use of the methodology on tomato crop Licopersicon esculentum Mill) under greenhouse.

Some past decision theory models for euro construction model codes and for road drainage in Spain, and modest hints with multi-criteria methods for agro and environmental assurance

The authors are from UPM and are relatively grouped, and all have intervened in different academic or real cases on the subject, at different times as being of different age. With precedent from E. Torroja and A. Páez in Madrid Spain Safety Probabilistic models for concrete about 1957, now in ICOSSAR conferences, author J.M. Antón involved since autumn 1967 for euro-steel construction in CECM produced a math model for independent load superposition reductions, and using it a load coefficient pattern for codes in Rome Feb. 1969, practically adopted for European constructions, giving in JCSS Lisbon Feb. 1974 suggestion of union for concrete-steel-al.. That model uses model for loads like Gumbel type I, for 50 years for one type of load, reduced to 1 year to be added to other independent loads, the sum set in Gumbel theories to 50 years return period, there are parallel models. A complete reliability system was produced, including non linear effects as from buckling, phenomena considered somehow in actual Construction Eurocodes produced from Model Codes. The system was considered by author in CEB in presence of Hydraulic effects from rivers, floods, sea, in reference with actual practice. When redacting a Road Drainage Norm in MOPU Spain an optimization model was realized by authors giving a way to determine the figure of Return Period, 10 to 50 years, for the cases of hydraulic flows to be considered in road drainage. Satisfactory examples were a stream in SE of Spain with Gumbel Type I model and a paper of Ven Te Chow with Mississippi in Keokuk using Gumbel type II, and the model can be modernized with more varied extreme laws. In fact in the MOPU drainage norm the redacting commission acted also as expert to set a table of return periods for elements of road drainage, in fact as a multi-criteria complex decision system. These precedent ideas were used e.g. in wide Codes, indicated in symposia or meetings, but not published in journals in English, and a condensate of contributions of authors is presented. The authors are somehow involved in optimization for hydraulic and agro planning, and give modest hints of intended applications in presence of agro and environment planning as a selection of the criteria and utility functions involved in bayesian, multi-criteria or mixed decision systems. Modest consideration is made of changing in climate, and on the production and commercial systems, and on others as social and financial.

Modular Planar Antenna at X-band for satellite communications

An antenna which has been conceived as a portable system for satellite communications based on the recommendations ITU-R S.580-6 [1] and ITU-R S.465-5 [2] for small antennas, i.e., with a diameter lower than 50 wavelengths, is introduced. It is a planar and a compact structure with a size of 40×40×2 cm. The antenna is formed by an array of 256 printed elements covering a large bandwidth (14.7%) at X-Band. The specification includes transmission (Tx) and reception (Rx) bands simultaneously. The printed antenna has a radiation pattern with a 3dB beamwidth of 5°, over a 31dBi gain, and a dual and an interchangeable circular polarization

Energy requirements in pressure irrigation systems

Modernization of irrigation schemes, generally understood as transformation of surface irrigation systems into pressure –sprinkler and trickle- irrigation systems, aims at, among others, improving irrigation efficiency and reduction of operation and maintenance efforts made by the irrigators. However, pressure irrigation systems, in contrast, carry a serious energy cost. Energy requirements depend on decisions taken on management strategies during the operation phase, which are conditioned by previous decisions taken on the design project of the different elements which compose the irrigation system. Most of the countries where irrigation activity is significant bear in mind that modernization irrigation must play a key role in the agricultural infrastructure policies. The objective of this study is to characterize and estimate the mean and variation of the energy consumed by common types of irrigation systems and their management possibilities. The work includes all processes involved from the diversion of water into irrigation specific infrastructure to water discharge by the emitters installed on the crop fields. Simulation taking into account all elements comprising the irrigation system has been used to estimate the energy requirements of typical irrigation systems of several crop production systems. It has been applied to extensive and intensive crop systems, such us extensive winter crops, summer crops and olive trees, fruit trees and vineyards and intensive horticulture in greenhouses. The simulation of various types of irrigation systems and management strategies, in the framework imposed by particular cropping systems, would help to develop criteria for improving the energy balance in relation to the irrigation water supply productivity.

Climate variability effects on summer cropping systems on the Iberian Peninsula

Climate variability and changes in the frequency of extremes events have a direct impact on crop yield and damages. Climate anomalies projections at monthly and yearly timescale allows us for adapting a cropping system (crops, varieties and management) to take advantage of favorable conditions or reduce the effect of adverse conditions. The objective of this work is to develop indices to evaluate the effect of climatic variability in summer cropping systems of Iberian Peninsula, in an attempt of relating yield variability to climate variability, extending the work of Rodríguez-Puebla (2004).

Coastal floods and decadal changes: the climate factor

Observation has widely shown for nearly all last century that the Spanish (Dynamic) Maritime Climate was following around 10 to 11 year cycles in its most significant figure, wind wave, despite it being better to register cycles of 20 to 22 years, in analogical way with the semi-diurnal and diurnal cycles of Cantabrian tides. Those cycles were soon linked to sun activity and, at the end of the century, the latter was related to the Solar System evolution. We know now that waves and storm surges are coupled and that (Dynamic) Maritime Climate forms part of a more complex “Thermal Machine” including Hydrological cycle. The analysis of coastal floods could so facilitate the extension of that experience. According to their immediate cause, simple flood are usually sorted out into flash, pluvial, fluvial, groundwater and coastal types, considering the last as caused by sea waters. But the fact is that most of coastal floods are the result of the concomitance of several former simple types. Actually, the several Southeastern Mediterranean coastal flood events show to be the result of the superposition within the coastal zone of flash, fluvial, pluvial and groundwater flood types under boundary condition imposed by the concomitant storm sea level rise. This work shall be regarded as an attempt to clarify that cyclic experience, through an in-depth review of a past flood events in Valencia (Turia and Júcar basins), as in Murcia (Segura’s) as well.

Plausibility of a subglacial lake under Amundsenisen Icefield (Svalbard): spatially variable water content and sensitivity to thermal effect of snow and firn layers

Within our study of the plausibility of a subglacial lake under the Amundsenisen Icefield in Southern Spitzbergen, Svalbard achipelago (Glowacki et al., 2007), here we focus on the sensitivity of the system to the thermal effect of the firn and snow layers. Rough heat balance analysis shows that the firn layer plays an important role by driving the heat release to the atmosphere, so that its influence on the ice-water phase transition cannot be neglected (Bucchignani et al., 2012).

The impact of large-scale circulation patterns on summer crop in Iberian Peninsula

Large-scale circulations patterns (ENSO, NAO) have been shown to have a significant impact on seasonal weather, and therefore on crop yield over many parts of the world(Garnett and Khandekar, 1992; Aasa et al., 2004; Rozas and Garcia-Gonzalez, 2012). In this study, we analyze the influence of large-scale circulation patterns and regional climate on the principal components of maize yield variability in Iberian Peninsula (IP) using reanalysis datasets. Additionally, we investigate the modulation of these relationships by multidecadal patterns. This study is performed analyzing long time series of maize yield, only climate dependent, computed with the crop model CERES-maize (Jones and Kiniry, 1986) included in Decision Support System for Agrotechnology Transfer (DSSAT v.4.5).