Effects of crevice size on the establishment of macroalgae in subtropical streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fracture resistance of simulated immature teeth after different intra-radicular treatments

The aim of this study was to evaluate the fracture resistance of simulated immature teeth after different intra-radicular treatments. Crowns and roots of bovine incisors were cut transversally and removed to simulate immature teeth. Root canal preparation and flaring were performed using a bur in crown-apex and apex-crown direction. The samples were distributed into 5 groups (n=10): Positive control (PoC) - no root canal flaring or filling; Negative control (NeC) - teeth were sectioned and their root canals were flared; Direct anatomical glass fiber post (RaP) - #2 Reforpost main glass fiber post relined with composite resin; Double tapered conical glass fiber posts (ExP) - #3 Exacto glass fiber post; and #2 Reforpost main glass fiber + Reforpin accessory glass fiber posts (RrP). In RaP, ExP and RrP, 4.0-mm apical plugs were done with MTA Angelus. The specimens were embedded in polystyrene resin inside cylinders and the periodontal ligament was simulated with a polyether-based impression material. The specimens were submitted to compressive fracture strength test (0.5 mm/min at 135° relative to the long axis of the tooth) in a servo-hydraulic mechanical testing machine MTS 810. Data were subjected to one-way ANOVA and Dunnett's C or Tukey's tests (α=0.05). The control groups (PoC and NeC) showed lower fracture strength than the experimental groups. NeC presented the lowest resistance and ExP presented the highest resistance among the experimental groups. The flaring procedures produced a detrimental effect on the fracture resistance of the bovine teeth. Glass fiber intra-radicular posts increased significantly the fracture resistance of simulated immature teeth.

Prevalence of the hepatitis C virus among university employees in São Paulo, southeastern Brazil: predictive factors and geoprocessing spatial analysis

Background There are limited studies on the prevalence and risk factors associated with hepatitis C virus (HCV) infection. Objective Identify the prevalence and risk factors for HCV infection in university employees of the state of São Paulo, Brazil. Methods Digital serological tests for anti-HCV have been performed in 3153 volunteers. For the application of digital testing was necessary to withdraw a drop of blood through a needlestick. The positive cases were performed for genotyping and RNA. Chi-square and Fisher’s exact test were used, with P-value <0.05 indicating statistical significance. Univariate and multivariate logistic regression were also used. Results Prevalence of anti-HCV was 0.7%. The risk factors associated with HCV infection were: age >40 years, blood transfusion, injectable drugs, inhalable drugs (InDU), injectable Gluconergam®, glass syringes, tattoos, hemodialysis and sexual promiscuity. Age (P=0.01, OR 5.6, CI 1.4 to 22.8), InDU (P<0.0001, OR=96.8, CI 24.1 to 388.2), Gluconergam® (P=0.0009, OR=44.4, CI 4.7 to 412.7) and hemodialysis (P=0.0004, OR=90.1, CI 7.5 – 407.1) were independent predictors. Spatial analysis of the prevalence with socioeconomic indices, Gross Domestic Product and Human Development Index by the geoprocessing technique showed no positive correlation. Conclusions The prevalence of HCV infection was 0.7%. The independent risk factors for HCV infection were age, InDU, Gluconergan® and hemodialysis. There was no spatial correlation of HCV prevalence with local economic factors.

Influência da geometria oclusal e material restaurador na carga para fratura e distribuição de tensões em coroas totais

Pós-graduação em Odontologia Restauradora - ICT

Probabilidade de falha de coroas com infraestrutura em zircônia com diferentes geometrias

Pós-graduação em Odontologia Restauradora - ICT

Produção do espaço e controle social: os espaços residenciais populares fechados como novo modelo de moradia. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização do processo de soldagem por resistência elétrica em compósitos PEI/fibras contínuas para aplicações aeronáuticas

Pós-graduação em Engenharia Mecânica - FEG

Avaliação dos parâmetros tempo, corrente e pressão na soldagem por resistência elétrica de compósitos PEI/fibras contínuas: influência na resistência mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Root canal filling: fracture strength of fiber-reinforced composite-restored roots and finite element analysis

The aims of this study were to evaluate the effect of root canal filling techniques on root fracture resistance and to analyze, by finite element analysis (FEA), the expansion of the endodontic sealer in two different root canal techniques. Thirty single-rooted human teeth were instrumented with rotary files to a standardized working length of 14 mm. The specimens were embedded in acrylic resin using plastic cylinders as molds, and allocated into 3 groups (n=10): G(lateral) - lateral condensation; G(single-cone) - single cone; G(tagger) - Tagger's hybrid technique. The root canals were prepared to a length of 11 mm with the #3 preparation bur of a tapered glass fiber-reinforced composite post system. All roots received glass fiber posts, which were adhesively cemented and a composite resin core was built. All groups were subjected to a fracture strength test (1 mm/min, 45°). Data were analyzed statistically by one-way ANOVA with a significance level of 5%. FEA was performed using two models: one simulated lateral condensation and Tagger's hybrid technique, and the other one simulated the single-cone technique. The second model was designed with an amount of gutta-percha two times smaller and a sealer layer two times thicker than the first model. The results were analyzed using von Mises stress criteria. One-way ANOVA indicated that the root canal filling technique affected the fracture strength (p=0.004). The G(lateral) and G(tagger) produced similar fracture strength values, while G(single-cone) showed the lowest values. The FEA showed that the single-cone model generated higher stress in the root canal walls. Sealer thickness seems to influence the fracture strength of restored endodontically treated teeth.

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Utilização de bacteriófagos ambientais no controle de biofilmes de Salmonella spp. em superfícies utilizadas na indústria de processamento e comercialização de frango de corte e derivados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Veríssimo passando Érico a limpo: espelhos e biblioteca em Solo de clarineta

Pós-graduação em Letras - FCLAS

Criação de contexto favorável ao compartilhamento do conhecimento operário: pesquisa no ambiente vidreiro

In search for better competitiveness, the automotive industry has discussed and applied several concepts related to people and processes. However, in many organizations, the adopted concepts are implemented and kept unarticulated. In this context, authors recognize the role of the knowledge as competitive advantage, but it is still dealt in an implicit way with the traditional models of Production Management. Exploring opportunities in this scenario, this Thesis aims to analyse worker knowledge sharing using factors of Knowledge Management, Work Organization and Production Organization. For the realization of the present Thesis, the scope of the research was restricted to be the labour environment of the glass plants shop floor. The choice of the glass sector is justified due to high dependency on the tacit knowledge of blue-collars. The research uses a qualitative-quantitative approach and employs interviews with workers and managers to identify factors. To assess the importance of these factors in the management judgments, is employed the technique Incomplete Pairwise Comparisons based on Analytic Hierarchy Process Saaty (2001). The result indicates integration among factors and highlights the importance of systematic and technical conversation among operators to share better your knowledge. Also, worker knowledge sharing is improved using communication, training and work instruction. This research extends the conceptual frameworks encountered in literature from the factors integration of Knowledge Management with the Organization of Work and the Production and makes explicit use of the theme of knowledge. This contributes to promote of a favourable context for the creation and sharing of knowledge, among the people in the labour environment, and to support incremental innovation

Preparação e caracterização de óxido de alumínio anodizado sobre substratos transparentes

Pós-graduação em Ciência e Tecnologia de Materiais - FC

De um subproduto industrial para um produto destinado à alimentação animal: produção de biomassa bacteriana

A grande diversidade das atividades industriais ocasiona durante o processo produtivo a geração de resíduos sólidos, líquidos e gasosos, que podem poluir e/ou contaminar o solo, a água e o ar. Embora existam regulamentos para o descarte desses resíduos, a inobservância às regras, a ineficiência dos tratamentos despoluentes e a inoperância de órgãos fiscalizadores permitem que, ainda hoje, sejam lançados ao ambiente grandes cargas de poluentes. Isso se aplica às indústrias de alimentos de origem animal. Felizmente, a visão dos empresários do setor vem mudando, na medida em que a imagem de uma empresa que conta com produtos e processos ambientalmente responsáveis representa parte das estratégias competitivas atuais. O objetivo deste trabalho foi demonstrar como um efluente industrial pode ser transformado em matéria prima para a obtenção de um produto com valor comercial, utilizando tecnologias reconhecidas pela indústria e a atividade microbiana. O efluente foi obtido em indústria de abate e processamento de tilápias, apresentado (valores médios) pH = 9,4, DQO = 1.127 mg/L, óleos e graxas = 1.166 mg/L, nitrogênio total = 813 mg/L, coliformes a 30–35o C = 1,0x105 NMP/mL, coliformes a 45o C = 0,41 NMP/mL, bolores e leveduras = 4,6x103 UFC/mL e, ocasionalmente, contendo Salmonella sp e Aeromonas sp. Os tratamentos físicos aplicados ao efluente incluíram gradeamento, filtração (50µm) e pasteurização (65o C/30 min). O cultivo de Rubrivivax gelatinosus foi realizado sob anaerobiose em reatores de vidro durante 7 dias, em temperatura ambiente (30±5o C) e 2.000±500 lux. A recuperação da biomassa foi feita por filtração tangencial (0,2 µm; 1,5 bar), centrifugação (3.400 g/30 min; 5o C) e liofilização (-40o C) e a pulverização foi realizada manualmente. A produção de massa celular atingiu 0,18 g/L, com produtividade de 0,0634 g/L.dia. O processo promoveu redução de 52% na DQO, 48% em óleos e graxas e 22% no nitrogênio total, gerando um resíduo com pH 7,9, livre de bactérias patogênicas e, portanto, apto ao descarte. O produto obtido apresentou cor vermelho escuro (L = 22,42; C = 14,22; h = 25,48), 4,55% de umidade, 57,39% de proteína, 11,08% de extrato etéreo, 4,05% de matéria mineral, 3,03 mg/g de oxicarotenóides, 20,27 NMP/g de coliformes a 30–35o C, <1,0 NMP/g de coliformes a 45o C, 1,2x103 UFC/g de bolores e leveduras e ausência de microrganismos patogênicos. Essas características apontam para um potencial pigmentante e nutricional positivo no produto, que pode encontrar aplicação na produção animal, com segurança microbiológica. Dessa forma, fecha-se um ciclo autosustentável que pode ser adotado na própria fonte geradora do resíduo industrial, permitindo a reversão de gastos com tratamento despoluente em receitas advindas da comercialização de um novo produto.