Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings

This paper proposes a methodology for improvement of energy efficiency in buildings through the innovative simultaneous incorporation of three distinct phase change materials (here termed as hybrid PCM) in plastering mortars for façade walls. The thermal performance of a hybrid PCM mortar was experimentally evaluated by comparing the behaviour of a prototype test cell (including hybrid PCM plastering mortar) subjected to realistic daily temperature profiles, with the behaviour of a similar prototype test cell, in which no PCM was added. A numerical simulation model was employed (using ANSYS-FLUENT) to validate the capacity of simulating temperature evolution within the prototype containing hybrid PCM, as well as to understand the contribution of hybrid PCM to energy efficiency. Incorporation of hybrid PCM into plastering mortars was found to have the potential to significantly reduce heating/cooling temperature demands for maintaining the interior temperature within comfort levels when compared to normal mortars (without PCM), or even mortars comprising a single type of PCM.

Optimal behavior of responsive residential demand considering hybrid phase change materials

Due to communication and technology developments, residential consumers are enabled to participate in Demand Response Programs (DRPs), control their consumption and decrease their cost by using Household Energy Management (HEM) systems. On the other hand, capability of energy storage systems to improve the energy efficiency causes that employing Phase Change Materials (PCM) as thermal storage systems to be widely addressed in the building applications. In this paper, an operational model of HEM system considering the incorporation of more than one type of PCM in plastering mortars (hybrid PCM) is proposed not only to minimize the customerâ s cost in different DRPs but also to guaranty the habitantsâ  satisfaction. Moreover, the proposed model ensures the technical and economic limits of batteries and electrical appliances. Different case studies indicate that implementation of hybrid PCM in the buildings can meaningfully affect the operational pattern of HEM systems in different DRPs. The results reveal that the customerâ s electricity cost can be reduced up to 48% by utilizing the proposed model.

Roteiro metodológico para o estudo dos moinhos e aproveitamentos hidráulicos no concelho de Lousada

A Agência Portuguesa do Ambiente é possuidora de um valioso arquivo, resultante da atividade centenária desenvolvida pelos diferentes organismos com tutela sobre a gestão da água e o planeamento dos recursos hídricos, que importa conhecer e divulgar. O Arquivo Histórico dos Serviços Hidráulicos é um dos mais ricos acervos locais do País, reunindo um conjunto de milhares de documentos, que vão do século XIX à atualidade, constituindo um repositório documental com características ímpares e um testemunho da identidade, memória e história dos Serviços Hidráulicos. Os processos arquivados contam casos de estudo que percorrem os usos das águas públicas para diferentes fins e as modalidades da sua utilização, das quais queremos destacar os aproveitamentos hidráulicos e a laboração de moinhos. Com este artigo, pretendemos apresentar um roteiro metodológico para o estudo das formas de organização dos processos existentes no arquivo sobre os moinhos e aproveitamentos hidráulicos, no concelho de Lousada, no que respeita aos documentos e peças anexas, bem como aos modelos administrativos subjacentes.

Carbon materials as new generation of new electron shuttles for the anaerobic degradation of environmental xenobiotics

Tese de Doutoramento em Engenharia Química e Biológica

Materiais compósitos com incorporação de cânhamo industrial

Projeto de Investigação integrado de mestrado Internacional em Sustentabilidade do Ambiente Construído

Utilização de computação de elevado desempenho para a simulação de problemas de hidrodinâmica costeira

Dissertação de mestrado integrado em Engenharia Civil

Desenvolvimento e validação de uma solução construtiva em BTC

Dissertação de mestrado integrado em Engenharia Civil

Estudo numérico do escoamento e transporte de sedimentos em torno de pilares de pontes

Dissertação de mestrado integrado em Engenharia Civil

Implementação de um sistema de previsão e controlo para operação otimizada de um sistema de recolha e armazenamento de água pluvial

Dissertação de mestrado integrado em Engenharia Civil

Untersuchung der Bedingungen und Verhältnisse beim Dickstoffversatz unter Einbeziehung der Mischtechnik

Technology of high concistency materials, mixing prozess, sewage sludge incineration ash, products of the flue gas cleaning, flow behaviour, reaction calorimetry, hydraulic transportation, setting

Efeitos do arsênico sôbre a cultura do algodoeiro em terra arenosa

The authors studied the action of arsenic, in the form of lead arsenate and sodium arsenite, on cotton in white sandy soil of Piracicaba, State of S. Paulo, Brazil. The experiment was carried out in Mitscherlich pots, applying increasing quantities of the above mentioned compounds. The following conclusions were reached: sodium arsenite is more toxic than lead arsenate. 48 pounds per acre of lead arsenate and 16 pounds per acre of sodium arsenite reduced the vegetative development and the production of cotton. The roots were more seriously affected than the aerial parts. Sandy soils were sensitive to arsenic toxicity. The arsenic mobilization in the soil seems to depend upon factors such as, the a- cidity, the concentration of Fe2O3, CaO, P2O5 and soil colloids, both clay and humus components. The authors suggest, based on their own experiment and after a detailed study of the literature, the use of organic insecticids which may not leave toxic residues, rotation of crops, application of lime and reduction of arsenical sprays to a mini mum. Arsenic compounds should not be used in soils destined to the cultivation of food plants. Rice should not be planted in soils contaminated by arsenic compounds during several years of cotton cultivation. Future experiments are planed, using other soils such as "terra roxa", in Mitscherlich pots and in field plots.

Pesquisas sôbre a análise estatística de experiências de adubação com o auxílio da lei de Mitscherlich

Statistical analyses of an experiment on wheat were carried out with the aid of Mitscherlich's law. The experiment was made in Ponta Grossa, Paraná, by the Ministry of Agriculture of Brasil. Lime, in the form of Ca(OH)2, was applied at the levels of 0, 2, 4, 6 and 8 metric tons per hectare. A 5 x 5 Latin square was used. Lime was applied in 1940 and wheat was cultivated in the same plots for several years. The following fertilizers were annually used for all plots: NaNO3 100 kilograms per hectare, Superphosphate 350 kilograms per hectare, K2S04 80 kilograms per hectare. The statistical analysis of the data collected in 1941, 1942, 1943, 1947 and 1948, carried out in accordance with the methods previously introduced by Pimentel Gomes and Malavolta (1949 a, 1949 b) and Pimentel Gomes (1950), proved: I. That Mitscherlich's law could be correctly applied to the data. II. That there was a statistically significant effect of lime on wheat yield. III. That the optimum amount of lime to be applied to the soil lies between 5 and 15 hundred kilograms of Ca(OH)2 per hectare. IV. That there is a migration of calcium from some plots to others, in such a way that the data obtained in 1947 and 1948 are not representative of the amounts of lime applied in 1940. V. That the analysis of variance can be used, as the Bartlett test shows that the variances at the distinct levele of lime application are not statistically different. It must be noted that, with improved variety and fertilization, the yield was rised to about 2500 kilograms per hectare in 1947, and 1600 in 1948, being only of about 100 kilograms per hectare in 1940.

Análise de poliembrionia em Citrus, máxime em toranjas

1 - This paper is a joined publication of the Dept. of Genetics, Escola Superior de Agricultura "Luiz de Queiroz", University of São Paulo, and Secção de Citricultura e Frutas Tropicais, Instituto Agronômico, de Campinas, and deal with the number of seed per fruit and the polyembryony in Citrus, with special reference to the pummelos (C. grandis). 2 - For C. pectinifera, hibrid limon x acid lime, C. histrix and Citrus sp. the mean of seeds per fruit is 5,8 - 17,3 - 30,2 -94,6; for 14 pummelos the average was 100 and the range of variation 11 to 185 seeds per fruit. For the four above mentioned Citrus the cotyledons were classified into 3 types: big (near 8 mm.), medium (near 6 mm) and small (near 4 mm) and for the pummelos there was only one size of cotyledons, about 10 mm (table 1). 3 - The polyembryony was determined by two processes: a) counting of the embryos in the mature seed; b) counting after germination in flats or seed-beds. The rasults obtained are in table 2; the process a gave larger results than process b.The following pummelos are monoembryonics: melancia, inerme, Kaune Paune, sunshine, vermelha, Singapura, periforme, Zamboa, doce, Indochina, Lau-Tau, Shantenyau and Siamesa. Sometime it was found a branching of the main stem that gave a impression of polyembryonic seeds. 4 - It was shown by the x2 test that the distribution of embryo numbers fits the Poisson's series (table 2) in both processes. 5 - It is discussed in table 2 the variability of polyembryony for the following cases: a) between plants, within years. The teste for the differences of mean of polyembryony between 3 plants of C. pectinifera is statistically significant in 1948 and 1949; b) between yields of the same plant, within year. The same case of C. pectinifera may be used for this purpose; c) between process, within year. It is shown in table 3, for C. pectinifera and the hibrid "limon x acid lime" that there is a statistically signicicant between both process above mentioned.

Competição entre adubos fosfatados em milho (Zea mays L)

This paper relates the results of an experiment designed to study the comparative effects of several phosphates applied to corn crops. The following phosphates were applied to a latin square of 6x6: Latif (a rock phosphate), fospal, superphosphate, fertifos, hiperfosfato and serranafosfato (a fusion phosphate). The nutrients were employd at the rates of 200 kg of N (as Chilean nitrate), 200kg of K2O (as muriate of potash) and 200 kg of P205. To correct the acidity and to improve the poor physical conditions of the sandy soil studied limestone (450 kg/Ha) and cotton seed meal (900 kg/Ha) were added to all plots; liming was made one month in advance to the planting. In the second year, in the same place, the split-plot technique was used: half plot received only N and K20 whereas the other half received the same treatment as the year before. The results can be summarized as follows: 1. in the first year, superphosphate of lime, produced better results than the other phosphates; there was no significant difference among fertifos, serranafosfato, and hiperfosfato but these phosphates proved to be superior to fospal and Latif; 2. in the second year, superphosphate, fertifos and serranafosfato produced practically the same effect, being better than hiperfosfato, fospal, and Latif which did not differ signicantly; 3. the increase in yield due to the reapplication of phosphates to the half plots was not advantageous under an economic point of view; however, it is interesting to note that the yield was still benefited in spite of the heavy doses of phosphates applied the year before.

A estimação do efeito residual de fertilizantes por meio da Lei de Mitscherlich

This paper deals with the estimation of the residual effect of fertilizers through the use of Mitscherlich's law. The formulas and reasonings now presented are a further development of those introduced previously by PIMENTEL GOMES (2). The new formulas allow the estimation of the residual effect h in cases where the experiments are carried out in the same plots for two or three subsequent years (or crops). In an experiment analysed as an example, the residual effect of calcium hydroxide was estimated to be h = 0.423, that is, about 42%, so that one should advise the use of frequent application of small amounts of lime instead of heavy quantities used at long intervals.