Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Flutuação populacional e distribuição vertical de Brevicoryne brassicae (L.) (Hemiptera: Aphididae) em couve

O conhecimento da dinâmica populacional e da distribuição vertical de insetos pragas em plantas hospedeiras é fundamental para o desenvolvimento de programas de manejo integrado de pragas. No presente trabalho efetuou-se um levantamento populacional de formas ápteras do pulgão Brevicoryne brassicae (L.), visando determinar a época de maior densidade populacional e a distribuição vertical em plantas de couve, (Brassica oleracea L. var. acephala DC.), cultivadas em Jaboticabal, SP. O estudo foi realizado durante as safras de brássicas de 1998 e 1999, efetuando-se correção da acidez do solo por meio de aplicação de calcário apenas no campo utilizado em 1998. A amostragem dos pulgões foi feita visualmente em folhas classificadas em três categorias: apical, mediana e basal. Nas duas safras estudadas, a infestação de B. brassicae na couve atingiu a maior densidade populacional em setembro, diminuindo rapidamente a seguir. Nos dois campos não se observou a mesma distribuição de B. brassicae em folhas apicais, medianas e basais. Os fatores que podem ter contribuído para as diferenças observadas no padrão de distribuição do pulgão devem estar relacionados com a precipitação pluvial e o calcário magnesiano.

Leaf area prediction models for Zinnia elegans Jacq., Zinnia haageana regel and 'profusion cherry'

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de características morfométricas na relação solo-superfície da Bacia Hidrográfica do Córrego Rico, Jaboticabal (SP)

Com a análise das características morfométricas procura-se entender a relação solo-superfície, em decorrência dos processos erosivos sobre estruturas e litologias variadas. Neste trabalho, objetivou-se avaliar as características morfométricas do padrão de drenagem e do relevo em microbacias hidrográficas de 2ª ordem de magnitude, em Latossolo Vermelho-Escuro e Argissolo Vermelho-Amarelo, com vistas ao planejamento agroambiental da Bacia Hidrográfica do Córrego Rico, município de Jaboticabal, SP. O estudo foi baseado em fotografias aéreas, pancromáticas, verticais na escala 1:35.000 da região administrativa de Ribeirão Preto. Com técnicas de fotointerpretação, foram traçadas a rede de drenagem e respectivas microbacias hidrográficas, onde as variáveis selecionadas foram determinadas. As classes de risco de degradação, resultando no uso potencial do solo, foram determinadas de acordo com o coeficiente de rugosidade. As características do padrão de drenagem e do relevo repercutiram no comportamento hidrológico e litológico das microbacias hidrográficas, possibilitando a diferenciação entre as unidades de solos. A densidade de drenagem e a amplitude altimétrica foram as características que mais contribuíram para o poder discriminatório na relação solo-superfície. Na análise conjunta do potencial de uso do solo, verificou-se, principalmente, adequação para agricultura nos Latossolos e pecuária e, ou, reflorestamento nos Argissolos.

Subdosages of Bacillus thuringiensis on Plutella xylostella) (Lepepidoptera: plutellidae) and Trichogramma pretiosum (Hymenoptera: trichogrammatidae)

The aim of this paper was to evaluate the biological aspects of Plutella xylostella and Trichogramma pretiosum in eggs of the F2 generation of P. xylostella under the influence of Bacillus thuringiensis in laboratory conditions. The experiment was conducted in the Laboratorio de Biologia and Criacao de Insetos of Faculdade de Ciencias Agrarias e Veterinarias de Jaboticabal - UNESP reen collars contaminated with strains and commercial product based on B. thuringiensis in the laboratory. The eggs obtained from the F2 generation of P. xylostella evaluated the biological parameters of T. pretiosum. It was observed that some biological characteristics of P. xylostella showed changes by the treatment with B. thuringiensis. The viability of the larvae and pupae stages, pupae weight were the biological parameters more influenced by treatments, with values significantly reduced when compared to control. However, the larvae length and pupae stages and sex ratio were similar in all treatments, with no significant biological variations. Thus, this bacterium isolated from this behavior may provide greater exposure of larvae to other natural enemies as well as generation of adults less viable, which makes them potential programs in pest control, since the interaction of the methods of control is one of the main ways to enhance the biological control of insect pests. It was observed sublethal effects on P. xylostella biology, and B. thuringiensis negative influence on the parasitism capacity and emergency of T. pretiosum.

A simple and non-destructive model for individual leaf area estimation in citrus

Introduction. Leaf area is often related to plant growth, development, physiology and yield. Many non-destructive models have been proposed for leaf area estimation of several plant genotypes, demonstrating that leaf length, leaf width and leaf area are closely correlated. Thus, the objective of our study was to develop a reliable model for leaf area estimation from linear measurements of leaf dimensions for citrus genotypes. Materials and methods. Leaves of citrus genotypes were harvested, and their dimensions (length, width and area) were measured. Values of leaf area were regressed against length, width, the square of length, the square of width and the product (length x width). The most accurate equations, either linear or second-order polynomial, were regressed again with a new data set; then the most reliable equation was defined. Results and discussion. The first analysis showed that the variables length, width and the square of length gave better results in second-order polynomial equations, while the linear equations were more suitable and accurate when the width and the product (length x width) were used. When these equations were regressed with the new data set, the coefficient of determination (R(2)) and the agreement index 'd' were higher for the one that used the variable product (length x width), while the Mean Absolute Percentage Error was lower. Conclusion. The product of the simple leaf dimensions (length x width) can provide a reliable and simple non-destructive model for leaf area estimation across citrus genotypes.

Annual evolution of global, direct and diffuse radiation and fractions in tilted surfaces

Avaliou-se a evolução anual das componentes global, direta e difusa da radiação solar incidente em superfícies inclinadas a 12,85; 22,85 e 32,85º, com face voltada ao Norte, em Botucatu-SP. Foram obtidas frações radiométricas para cada componente da radiação nas superfícies supracitadas, através de razões com a radiação global e a do topo da atmosfera. A sazonalidade foi avaliada através das médias mensais dos valores diários. As medidas ocorreram entre 04/1998 e 07/2001, em 22,85º; 08/2001 e 02/2003, em 12,85º; e de 03/2003 a 12/2007, em 32,85º, com medidas concomitantes no plano horizontal (referência). Os níveis das radiações global e direta nos planos inclinados foram inferiores no período de verão e superiores entre os equinócios, quando comparadas ao plano horizontal. A radiação difusa nas superfícies inclinadas foi inferior na maioria dos meses, com perdas de até 65%. Ocorreu uma tendência de aumento das diferenças entre as superfícies horizontal e inclinada com o incremento do ângulo em todas as componentes e frações da radiação incidente. A evolução anual das precipitações pluviométricas e da razão de nebulosidade afetou diretamente a transmissividade atmosférica das componentes direta e difusa na região.

Análise tridimensional de esforços em elementos rompedores de semeadoras de plantio direto

As informações da avaliação de mecanismos de abertura de sulco de semeadoras de plantio direto auxiliam as empresas no dimensionamento de ferramentas rompedoras do solo, que buscam menor requerimento energético. Este trabalho foi realizado num solo classificado como Latossolo Vermelho com o objetivo de avaliar tridimensionalmente os esforços dos mecanismos de abertura de sulco de semeadoras adubadoras de plantio direto. O delineamento experimental utilizado foi o de blocos ao acaso com cinco tratamentos, sendo cinco mecanismos de abertura de sulco (disco liso - DL, disco corrugado - DC, disco ondulado - DO, disco duplo - DD e haste sulcadora - H). Para mensurar os esforços dos mecanismos de abertura de sulco, foi utilizado um dinamômetro com sensibilidade nas direções horizontal, transversal e vertical e no momento fletor e torsor. A avaliação mostrou que a interação entre mecanismos de abertura de sulco e carga vertical não foi significativa, entretanto os fatores foram significativos quando analisados individualmente. O resultado individual dos mecanismos de abertura de sulco mostrou que o disco ondulado proporcionou maior área de mobilização do solo, a haste sulcadora apresentou o menor valor de força vertical e o disco duplo e a haste sulcadora obtiveram o menor esforço horizontal.

Esforços em ferramentas rompedoras de solo de semeadoras de plantio direto

The individual evaluation of mechanisms for opening furrows to drop the seeds in a no-tillage seeders cultivation assists the companies in the sizing of opening tools of the ground, that search for minor energy petition and for diminishing the ground area mobilized. Therefore this work had the aim of evaluate the efforts of five different mechanisms of opening of ridge of seeding of direct plantation varyng the vertical load. The experiment was installed in one ground classified as Dystroferric Red Nitosol. The used experimental delineation was of the one randomized blocks in a factorial project 5 x 4, constituted a the following factors: five mechanisms of furrow opening (even disk - DL, corrugated disk - DC, ondulated disk - DO, double disk - DD and furrow rod - F) and four vertical loads (750, 1500, 2250 and 3000 N). To measure the forces in the studied treatments a dynamometer with sensitivity in the directions was used horizontal, lateral and vertical direction. The evaluation showed that the interaction between mechanisms of opening of ridge and vertical load was not significant, however the factors were significant when analyzed individually. The connecting rod promoted mobilization of the ground with smaller draft of horizontal effort reaching depths of work. The work showed that the vertical load influenced the depth of work of the mechanisms of ridge opening. The mechanisms of ridge opening of record type need vertical force to penetrate into the ground.

Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Polymorphisms of Lewis and Secretor genes are related to breast cancer and metastasis in axillary lymph nodes

ABH and Lewis antigen expression has been associated with cancer development and prognosis, tumor differentiation, and metastasis. Considering that invasive ductal breast carcinoma (IDC) presents multiple molecular alterations, the aim of the present study was to determine whether the polymorphism of ABO, Lewis, and Secretor genes, as well as ABO phenotyping, could be associated with tumor differentiation and lymph nodes metastasis. Seventy-six women with IDC and 78 healthy female blood donors were submitted to ABO phenotyping/genotyping and Lewis and Secretor genotyping. Phenotyping was performed by hemagglutination and genotyping by the polymerase chain reaction with sequence-specific primers. ABO, Lewis, and Secretor genes were classified by individual single nucleotide polymorphism at sites 59, 1067, 202, and 314 of the Lewis gene, 428 of the Secretor gene, and 261 (O1 allele), 526 (O2 and B allele), and 703 (B allele). No association was found between breast cancer and ABO antigen expression (P = 0.9323) or genotype (P = 0.9356). Lewis-negative genotype was associated with IDC (P = 0.0126) but not with anatomoclinical parameters. Nonsecretor genotype was associated with axillary lymph node metastasis (P = 0.0149). In conclusion, Lewis and Secretor genotyping could be useful to predict respectively breast cancer susceptibility and axillary lymph nodes metastasis.

The transformation between exploration and exploitation applied to inventors of packaging innovations

While the inventor is often the driver of an invention in the early stages, he/she needs to move between different social networks for knowledge in order to create and capture value. The main objective of this research is to propose a literature-based framework based on innovation network theory and complemented with C-K theory, in order to analyze the invention/innovation process of inventors and the product concepts in a packaging industry context. Empirical input from three case studies of packaging inventions and their inventors is used to elaborate the suggested framework.The article identifies important gaps in the literature of innovation networks. This is addressed through a theoretical framework based on network theories, complemented with C-K theory for the product design level. The strength-of-ties dimension of the theoretical framework suggests, in agreement with the mainstream literature and the cases presented, that weak ties are required to access the knowledge related to exploration networks and strong ties are required to utilize the knowledge in the exploitation network. The transformation network is an intermediate step acting as a bridge where entrepreneurs can find required knowledge. The transformation network is also an intermediate step where entrepreneurs find financing and companies interested in commercializing inventions. (C) 2010 Elsevier Ltd. All rights reserved.

Ocorrência e Interações de Recém-nascidos e Filhotes de golfinho-rotador Stenella longirostris na Baía dos Golfinhos, Fernando de Noronha

Studies indicate that spinner dolphins use the Baía dos Golfinhos, in Fernando de Noronha Archipelago, for resting, reproduction, parental care and protection against shark attacks. The present study had the purpose of verifying the seasonality of spinner dolphin newborns and calves in relation to the months of the year and the pluviometric seasons (dry and rainy), as well as their interaction with the number and gender of accompanying adults and their positioning in relation to the adults (vertical, horizontal, and depth) in the above mentioned bay. The analysis were made out of photo records of dolphins collected between 2000 and 2006 (seasonality) and between 1995 and 2006 (interaction) both using ad libitum sampling method during free dives. To determine the age category, the reason between the smaller dolphin s total body length and the bigger dolphin s total body length was calculated. The dolphins were then divided into three age groups: adults, newborns and calves. Those with total body length ≥ 170cm were considered adults, newborns up to 105cm, and calves from 106cm to 128cm. In addition, the secondary characters described in literature were used to identify newborns and calves. The adults had dimensions of total lenght ≥170cm , the newborns until 105cm and calves between 106cm and 128cm. I addition, secondary characteristics described in the literature were used to indentify newborns and calves. The number of spinner dolphin newborns was greater in the month of April and higher during the rainy season. Throughout the months and pluviometric seasons (pluviometer/pluvial metric), the number of calves did not have a significant difference. Concerning to the presence of newborns and calves age groups at Baía dos Golfinhos, there was not a significant difference. It was possible to identify the gender of the escorting adults as (42), 95.24% being females and 4.76% males. Newborns were more frequently seen in the company of two adults, whereas calves were more often accompanied by more than two adults However, there was not a significant difference for the newborns, whereas for the calves there was a significant difference for those classified as loners and those accompanied by more than two adults. When in vertical positioning, the newborns and calves were more frequently observed in inferior position with some difference demonstrated between some of that. While in horizontal positioning both age groups were more often seen in posterior position, also with differences between them. In the depth perspective newborns and calves were positioned anterior, however with significant difference for the calves. The occurrence of a peak of newborns in the months of April may indicate the existence of a birth seasonality pattern for the beginning of the rainy season, with births scattered throughout the year. The results for the positions and escorting of newborns and calves are related to protection and suckling. These conditions reinforce the importance of the area when it comes to the care for offspring, which calls for the creation of conservation rules to the area, especially during those months with greater occurrence of newborns

Preconcentration and determination of Cu(II) in a fresh water sample using modified silica gel as a solid-phase extraction adsorbent

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology