Mating system variation and assortative mating of sympatric bromeliads (Pitcairnia spp.) endemic to neotropical inselbergs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Productivity, stability and adaptability in open pollination progenies of Eucalyptus urophylla ST Blake

Prediction of genetic gains within breeding programs is not always compatible with those observed in practice. One reason for this inconsistency is the lack of knowledge of genotype-environment interaction (GxE). The aim of this study was to estimate genetic variation, evaluate the GxE, investigate the genetic correlation between pairs of environments and for the set, and to study the productivity, stability and adaptability at 2 years of age for diameter at breast height (DBH) in five progenies trials of Eucalyptus urophylla, used in a randomized complete block design, with the number of progenies ranging from 138 to 167, four to eight blocks and five to six plants per plot. Estimates of variance components and genetic parameters were obtained using the REML/BLUP method. For analysis of productivity, stability and adaptability, the HMRPGV method was used. The highest DBH growth was observed in Anhembi (10.52 cm) and Uberaba (10.20 cm). Estimates considered high were obtained for the coefficient of individual additive genetic variation (>13.3%) and average heritability among progenies (>0.40), indicating the possibility of obtaining genetic gains by selection among progenies. The coefficient of determination of the GxE was 1.7%, a fact that led to a high value of genotypic correlation between the performance of the progenies and environments (78.1%), indicating that the interaction is simple. The first six progenies showed a coincidence of 100% in the order of stability (HMGV), adaptability (RPGV) and productivity (HMRPGV), being 13% higher than the overall mean of five experiments (9.21 cm). When ordering the progenies, the selection of the 20 best in growth led to an increase in gain ranging of from 10.4 to 70%. Anhembi is the ideal place to have a breeding population which will be good in the other places as well.

Seedling structure in Asteraceae weedy species: considerations on the vasculature system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Galectin-1 exerts inhibitory effects during DENV-1 infection

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dynamic analysis for different finite element models of beams with viscoelastic damping layer

Many new viscoelastic materials have been developed recently to help improve noise and vibration levels in mechanical structures for applications in automobile and aeronautical industry. The viscoelastic layer treatment applied to solid metal structures modifies two main properties which are related to the mass distribution and the damping mechanism. The other property controlling the dynamics of a mechanical system is the stiffness that does not change much with the viscoelastic material. The model of such system is usually complex, because the viscoelastic material can exhibit nonlinear behavior, in contrast with the many available tools for linear dynamics. In this work, the dynamic behavior of sandwich beam is modeled by finite element method using different element types which are then compared with experimental results developed in the laboratory for various beams with different viscoelastic layer materials. The finite element model is them updated to help understand the effects in the damping for various natural frequencies and the trade-off between attenuation and the mass add to the structure.

A virtual experiment for the detection of specific features in the frequency response of a coupled nonlinear and linear oscillator

This paper presents an investigation into some practical issues that may be present in a real experiment, when trying to validate the theoretical frequency response curve of a two degree-of-freedom nonlinear system consisting of coupled linear and nonlinear oscillators. Some specific features, such as detached resonance curves, have been theoretically predicted in multi degree-of-freedom nonlinear oscillators, when subject to harmonic excitation, and the system parameters have been shown to be fundamental in achieving such features. When based on a simplified model, approximate analytical expression for the frequency response curves may be derived, which may be validated by the numerical solutions. In a real experiment, however, the practical achievability of such features was previously shown to be greatly affected by small disturbances induced by gravity and inertia, which led to some solutions becoming unstable which had been predicted to be stable. In this work a practical system configuration is proposed where such effects are reduced so that the previous limitations are overcome. A virtual experiment is carried out where a detailed multi-body model of the oscillator is assembled and the effects on the system response are investigated.

Output only based modal analysis of a reduced scale building using digital camera images

The article discusses a proposal of displacement measurement using a unique digital camera aiming at to exploit its feasibility for Modal Analysis applications. The proposal discusses a non-contact measuring approach able to measure multiple points simultaneously by using a unique digital camera. A modal analysis of a reduced scale lab building structure based only at the responses of the structure measured with the camera is presented. It focuses at the feasibility of using a simple ordinary camera for performing the output only modal analysis of structures and its advantage. The modal parameters of the structure are estimated from the camera data and also by using ordinary experimental modal analysis based on the Frequency Response Function (FRF) obtained by using the usual sensors like accelerometer and force cell. The comparison of the both analysis showed that the technique is promising noncontact measuring tool relatively simple and effective to be used in structural modal analysis

An investigation into the effects of resonances on the time delay estimate for leak detection in buried plastic water distribution pipes

In water distribution systems, old metallic pipes have been replaced by plastic pipes due to their deterioration over time. Although acoustic methods are effective in finding leaks in metallic pipes, they have been found to be problematic when applied to plastic pipes due to the high damping within the pipe wall and the surrounding medium. This is responsible for the leak signal not traveling long distances. Moreover, the leak energy in plastic pipes is generally located at a narrow frequency range located at low frequencies. However, the presence of resonances can narrow even more this frequency range. In order to minimise the influence of background noise and resonances on the calculation of the time delay estimate, band-pass filters are often used to supress undesirable frequency components of the noise. The objective of this paper is to investigate the influence of resonances in the pipe system (pipe, valves, connections and hydrants), on the time delay estimate calculated using acoustic signals. Analytical models and actual leak data collected in a bespoke rig located in the United Kingdom are used to investigate this feature.

Measurement of differential cross sections for the production of a pair of isolated photons in pp collisions at root s=7TeV

A measurement of differential cross sections for the production of a pair of isolated photons in proton-proton collisions at root s = 7 TeV is presented. The data sample corresponds to an integrated luminosity of 5.0 fb(-1) collected with the CMS detector. A data-driven isolation template method is used to extract the prompt diphoton yield. The measured cross section for two isolated photons, with transverse energy above 40 and 25 GeV respectively, in the pseudorapidity range vertical bar eta vertical bar < 2.5, vertical bar eta vertical bar (sic) [1.44, 1.57] and with an angular separation Delta R > 0.45, is 17.2 +/-0.2 (stat) +/-1.9 (syst) +/- 0.4 (lumi) pb. Differential cross sections are measured as a function of the diphoton invariant mass, the diphoton transverse momentum, the azimuthal angle difference between the two photons, and the cosine of the polar angle in the Collins-Soper reference frame of the diphoton system. The results are compared to theoretical predictions at leading, next-to-leading, and next-to-next-to-leading order in quantum chromodynamics.

Numerical and experimental investigation of a vibration system with non-ideal vibration source

An excitation force that is not influenced by the system's states is said to be an ideal energy source. In real situations, a direct and feedback coupling between the excitation source and the system must always exist. This manifestation of the law of conversation of energy is known as Sommerfeld Effect. In the case of obtaining a mathematical model for such system, additional equations are usually necessary to describe the vibration sources and their coupling with the mechanical system. In this work, a cantilever beam and a non-ideal electric DC motor that is fixed to the beam free end is analyzed. The motor has an unbalanced mass that provides excitation to the system proportional to the current applied to the motor. During the motor's coast up operation, as the excitation frequency gets closer to the beam first natural frequency and if the drive power increases further, the DC motor speed remains constant until it suddenly jumps to a much higher value (simultaneously the vibration amplitude jumps to a much lower value) upon exceeding a critical input power. It was found that the Sommerfeld effect depends on some system parameters and the motor operational procedures. These parameters are explored to avoid the resonance capture in Sommerfeld effect. Numerical simulations and experimental tests are used to help insight this dynamic behavior.

Molecular phylogeny of the highly diversified catfish subfamily Loricariinae (Siluriformes, Loricariidae) reveals incongruences with morphological classification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anthropometric profile and upper-limbs strength of bull rider s competitors

A força de preensão manual tem sido relatada como determinante no desempenho de empunhadura em modalidades como lutas e escalada. Este estudo teve por propósito avaliar a aptidão de força isotônica máxima e de preensão manual em praticantes e não praticantes de montaria em touros, a fim de obter parâmetros de referência desta população. Foram avaliados 20 sujeitos em dois grupos, sendo 10 classificados como atletas de montaria e 10 não-atletas. A avaliação da força de preensão manual foi realizada em dinamômetro em posição convencional (DP) e específica (DE), com ambas as mãos (D e E). A força isotônica máxima foi determinada pelo teste de uma repetição máxima (1RM) e também foram obtidas medidas de circunferência dos segmentos, bem como a composição corporal por protocolo de dobras cutâneas. Os valores das variáveis foram comparados pelo teste-t (ρ ≤ 0,05) para dados independentes. As relações entre os valores de força e características antropométricas foram traçadas pelo coeficiente de Pearson. Os resultados para AMT em DPD (43.8±6.8 kgf), DPE (39.4±7.7 kgf), DED (44.9±5.6 kgf) e DEE (39.8±8.3 kgf) comparados aos apresentados por n-AMT em DPD (47.0±3.0 kgf), DPE (42.2±6.1 kgf), DED (49.2±1.5 kgf) e DEE (46.2±4.1 kgf) apresentaram diferenças apenas para DED e DEE. A força nos testes de 1RM (supino reto: 73.2±12.0 kg e 82.0±12.0 kg; rosca direta: 45.2±8.9 kg e 43.8±8.9 kg; tríceps pulley: 67.0±6.3 kg e 72.0±6.3 kg; e puxada posterior: 73.5±8.5 kg e 73.7±7.5 kg) não mostram diferenças entre os grupos. A influência sobre a dinamometria apresenta-se diferente entre os grupos, sendo relevante a força de flexão do cotovelo em AMT e a antropometria e força isotônica para n-AMT. Conclui-se que as características morfo-funcionais de membros superiores não demandam especificidade à montaria em touros.

Suplementação nutricional, pretensões e custo entre jovens do interior e litoral paulista experiêntes em treinamento resistido

Objective and closed questions were applied to 15 - 21 years old individuals under regular resistance exercise practice and self-reported nutritional supplements users, approaching training practices, type of substance feed and socioeconomic characteristics. The data were treated by frequency around the mean value. Major difference was observed to the goal of improvement in physical fitness (Guaruja 21% and Bauru 9.6%), close to the muscle hypertrophic enhancements (Guaruja 22% and Bauru 19.2%), and health proposes (17.3%), which was only reported in the country city. The monthly employment with supplements was observed to be close to one hundred Real, in both regions (Guaruja 79% and Bauru 80%). Even, based on different purposes, the supplements feed practice was closed to the goals, showing a reliable referential of use, but done without appropriated professional care.

Desempenho tático de jogadores de futebol: comparação entre equipes vencedoras e perdedoras em jogo reduzido

The aim of study was to verify what tactical behaviors differ winner from loser teams in small sized games in youth soccer players. The tactical performance of winners and losers teams was compared through of System of Tactical Assessment in Soccer (FUT-SAT). Three thousand eight hundred and eight tactical actions were carried out by seventy-two youth soccer players from the under-11 (n=12), under-13 (n=12), under-15 (n=30) and under-17 (n=18) categories of Portuguese teams. Twenty four teams were composed to analyze, each team carried out one match (12 match analyzed). Each team was composed by three line players with goalkeeper which was not analyzed in test. The statistical analysis was performed thought the SPSS 17.0 software for Windows. A descriptive analyze and the KolmogorovSmirnov, Chi-square, Mann-Whitney U and T-Test tests to the independent samples was carried out, and the Cohen’s Kappa test to determining of the sample reability. Considering 76 variables analyzed, 12 presented significant differences among players of winners and loses teams. The players of the winner teams presented superiority in Macro-Category Action, in the Defensive tactical principles, Equilibrium and Defensive Unity. In the category Local of action in the Field, the winner teams presented superiority in the number of defensive actions performed in the defensive midfielder. In the category Result of the action, the variables Keep without the ball, Retrieving the ball possession and Shots on goal the winner teams presented higher results, while in variables Losing the ball possession and Suffering shot on goal the loser teams presented higher results. In the Performance Macro-Category, the superiority of the winners was showed by better Tactical Performance Index (TPI) in the Penetration principles, Offensive Unity, and in the Offensive phase of the game. The results demonstrated that the winner players presented superiority in both stages of the game.