Tanska keisari Kaarle V:n valtakunnan intresseissä 1521-1524

The master's thesis concerns the decisions of the imperial policy-makers in their Danish foreign policy during the crisis that culminated in the dissolution of the Nordic union of Kalmar during the years 1521-24. The sources consist of printed sources that mainly are collections of letters and diplomas, and additionally, acquaintance has been made with studies treating the subject. The aim of the study was to clarify the objectives, means and execution of the imperial policy and what priorizations did they make between the different objectives. Also, the part played by Denmark in the imperial foreign policy in general was to be assessed. Particularly, the aim was to find out and state a hierarchy between the importance of the different objectives by analyzing the choices made. It was observed that the continuing of peaceful relations in the North was clearly preferred in the imperial policy, especially as their war against France drew out. A war was seen as deteriorating the freedom of action of the main ally, king Christian II, and an armed conflict was to be prevented. The conceived impossibilty to intervene with armed forces to Christian's favour forced the imperial side to postpone their objectives in the fields of dynastical and alliance policy. In comparison to these, less weight was given to maintaining the rights and position of the empire and the rights granted in its name. To the Habsburgs, maintaining the economical embargo of Sweden, run forcefully by Christian II, was the least preferred objective. In light of the results of the master's thesis, the conceived priorities of the Northern European policy adopted by the imperial side resembled their political priorities in general.

On an analytical-numerical procedure for the analysis of cylindrical shells with arbitrarily oriented cracks

An analytical-numerical procedure for obtaining stress intensity factor solutions for an arbitrarily oriented crack in a long, thin circular cylindrical shell is presented. The method of analysis involves obtaining a series solution to the governing shell equation in terms of Mathieu and modified Mathieu functions by the method of separation of variables and satisfying the crack surface boundary conditions numerically using collocation. The solution is then transformed from elliptic coordinates to polar coordinates with crack tip as the origin through a Taylor series expansion and membrane and bending stress intensity factors are computed. Numerical results are presented and discussed for the pressure loading case.

A hierarchical system of learning automata that can learn die globally optimal path

Systems of learning automata have been studied by various researchers to evolve useful strategies for decision making under uncertainity. Considered in this paper are a class of hierarchical systems of learning automata where the system gets responses from its environment at each level of the hierarchy. A classification of such sequential learning tasks based on the complexity of the learning problem is presented. It is shown that none of the existing algorithms can perform in the most general type of hierarchical problem. An algorithm for learning the globally optimal path in this general setting is presented, and its convergence is established. This algorithm needs information transfer from the lower levels to the higher levels. Using the methodology of estimator algorithms, this model can be generalized to accommodate other kinds of hierarchical learning tasks.

Semi-similar solution of an unsteady compressible three-dimensional stagnation point boundary layer flow with massive blowing

A semi-similar solution of an unsteady laminar compressible three-dimensional stagnation point boundary layer flow with massive blowing has been obtained when the free stream velocity varies arbitrarily with time. The resulting partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme with a quasi-linearization technique in the nodal point region and an implicit finite-difference scheme with a parametric differentiation technique in the saddle point region. The results have been obtained for two particular unsteady free stream velocity distributions: (i) an accelerating stream and (ii) a fluctuating stream. Results show that the skin-friction and heat-transfer parameters respond significantly to the time dependent arbitrary free stream velocity. Velocity and enthalpy profiles approach their free stream values faster as time increases. There is a reverse flow in the y-wise velocity profile, and overshoot in the x-wise velocity and enthalpy profiles in the saddle point region, which increase as injection and wall temperature increase. Location of the dividing streamline increases as injection increases, but as the wall temperature and time increase, it decreases.

Development of special fastener elements

A special finite element (FASNEL) is developed for the analysis of a neat or misfit fastener in a two-dimensional metallic/composite (orthotropic) plate subjected to biaxial loading. The misfit fasteners could be of interference or clearance type. These fasteners, which are common in engineering structures, cause stress concentrations and are potential sources of failure. Such cases of stress concentration present considerable numerical problems for analysis with conventional finite elements. In FASNEL the shape functions for displacements are derived from series stress function solutions satisfying the governing difffferential equation of the plate and some of the boundary conditions on the hole boundary. The region of the plate outside FASNEL is filled with CST or quadrilateral elements. When a plate with a fastener is gradually loaded the fastener-plate interface exhibits a state of partial contact/separation above a certain load level. In misfit fastener, the extent of contact/separation changes with applied load, leading to a nonlinear moving boundary problem and this is handled by FASNEL using an inverse formulation. The analysis is developed at present for a filled hole in a finite elastic plate providing two axes of symmetry. Numerical studies are conducted on a smooth rigid fastener in a finite elastic plate subjected to uniaxial loading to demonstrate the capability of FASNEL.

Unsteady Incompressible Two-Dimensional and Axisymmetric Turbulent Boundary Layer Flows

The unsteady turbulent incompressible boundary-layer flow over two-dimensional and axisymmetric bodies with pressure gradient has been studied. An eddy-viscosity model has been used to model the Reynolds shear stress. The unsteadiness is due to variations in the free stream velocity with time. The nonlinear partial differential equation with three independent variables governing the flow has been solved using Keller's Box method. The results indicate that the free stram velocity distribution exerts strong influence on the boundary-layer characteristics. The point of zero skin friction is found to move upstream as time increases.

An absolute method for the determination of surface tension of liquids using pendent drop profiles

Drop formation at conical tips which is of relevance to metallurgists is investigated based on the principle of minimization of free energy using the variational approach. The dimensionless governing equations for drop profiles are computer solved using the fourth order Runge-Kutta method. For different cone angles, the theoretical plots of XT and ZT vs their ratio, are statistically analyzed, where XT and ZT are the dimensionless x and z coordinates of the drop profile at a plane at the conical tip, perpendicular to the axis of symmetry. Based on the mathematical description of these curves, an absolute method has been proposed for the determination of surface tension of liquids, which is shown to be preferable in comparison with the earlier pendent-drop profile methods.

Tekstit viraston työssä : Tutkimus etuuspäätösten kielestä ja konteksteista

Texts in the work of a city department: A study of the language and context of benefit decisions This dissertation examines documents granting or denying the access to municipal services. The data consist of decisions on transport services made by the Social Services Department of the City of Helsinki. The circumstances surrounding official texts and their language and production are studied through textual analysis and interviews. The dissertation describes the textual features of the above decisions, and seeks to explain such features. Also explored are the topics and methods of genre studies, especially the relationship between text and context. Although the approach is linguistic, the dissertation also touches on research in social work and administrative decision making, and contributes to more general discussion on the language and duties of public administration. My key premise is that a text is more than a mere psycholinguistic phenomenon. Rather, a text is also a physical object and the result of certain production processes. This dissertation thus not only describes genre-specific features, but also sheds light on the work that generates the texts examined. Textual analysis and analyses of discursive practices are linked through an analysis of intertextuality: written decisions are compared with other application documents, such as expert statements and the applications themselves. The study shows that decisions are texts governed by strict rules and written with modest resources. Textwork is organised as hierarchical mass production. The officials who write decisions rely on standard phrases extracted from a computer system. This allows them to produce texts of uniform quality which have been approved by the department s legal experts. Using a computer system in text production does not, however, serve all the needs of the writers. This leads to many problems in the texts themselves. Intertextual analysis indicates that medical argumentation weighs most heavily in an application process, although a social appraisal should be carried out when deciding on applications for transport services. The texts reflect a hierarchy in which a physician ranks above the applicant, and the department s own expert physician ranks above the applicant s physician. My analysis also highlights good, but less obvious practices. The social workers and secretaries who write decisions must balance conflicting demands. They use delicate linguistic means to adjust the standard phrases to suit individual cases, and employ subtle strategies of politeness. The dissertation suggests that the customer contact staff who write official texts should be allowed to make better use of their professional competence. A more general concern is that legislation and new management strategies require more and more documentation. Yet, textwork is only rarely taken into account in the allocation of resources. Keywords: (Critical) text analysis, genre analysis, administration, social work, administrative language, texts, genres, context, intertextuality, discursive practices

Unsteady free Convection MHD Boundary Layer Flow Near a Three-Dimensional Stagnation Point

The unsteady free convection boundary layer hydromagnectic flow near a stagnation point of a three-dimensional body with applied magnetic field and time-dependent wall temperature has been studied. Both semi-semilar and self-similar cases have been considered. The equations governing the above flow have been solved numerically using an implicit finite-difference scheme due to Keller. The magnetic field is found to reduce both the heat transfer and skin friction. The effect of the variation of the wall temperature with time and of mass transfer is found to be more pronounced on the heat transfer than on the skin friction. In self-similar case, for decelerating flow, there is temperature overshoot in the presence of fmagnetic field, but in semi-similar case overshoot occurs even without magnetic field due to the unsteadiness

Unsteady laminar incompressible second-order boundary-layer flow at a three-dimensional stagnation point

The unsteadely laminar incompressible second-order boundary-layer flow at the stagnation point of a three-dimensional body has been studied for both nodal and saddle point regions. The effects of mass transfer and Prandtl number have been taken into account. The equations governing the flow have been solved numerically using an implicit finite-difference scheme. It has been found that the parameter characterizing the unsteadiness in the velocity of the free stream, the nature of the stagnation point, the mass transfer and Prandtl number strongly affect the second-order skin friction and heat transfer. The overall skin friction becomes less due to second-order effects but the heat transfer has the opposite behaviour. For large injection, the second-order skin-friction and heat-transfer results prevail over the first-order boundary layer results whereas for the case of large suction the behaviour is just the opposite.

A fuzzy logic based dynamic wave model inversion algorithm for canal regulation

A fuzzy logic based centralized control algorithm for irrigation canals is presented. Purpose of the algorithm is to control downstream discharge and water level of pools in the canal, by adjusting discharge release from the upstream end and gates settings. The algorithm is based on the dynamic wave model (Saint-Venant equations) inversion in space, wherein the momentum equation is replaced by a fuzzy rule based model, while retaining the continuity equation in its complete form. The fuzzy rule based model is developed on fuzzification of a new mathematical model for wave velocity, the derivational details of which are given. The advantages of the fuzzy control algorithm, over other conventional control algorithms, are described. It is transparent and intuitive, and no linearizations of the governing equations are involved. Timing of the algorithm and method of computation are explained. It is shown that the tuning is easy and the computations are straightforward. The algorithm provides stable, realistic and robust outputs. The disadvantage of the algorithm is reduced precision in its outputs due to the approximation inherent in the fuzzy logic. Feed back control logic is adopted to eliminate error caused by the system disturbances as well as error caused by the reduced precision in the outputs. The algorithm is tested by applying it to water level control problem in a fictitious canal with a single pool and also in a real canal with a series of pools. It is found that results obtained from the algorithm are comparable to those obtained from conventional control algorithms.

Ways and Means for Disposal of Surplus Water in Storage Reservoirs and other Irrigation and Flood Protective Works

In the paper new way of classifying spillways have been suggested. The various types, merits and demerits or existing spillway devices have been discussed. The considerations governing the choice of a design of a spillway have been mention. A criteria for working out the economics of spillway design has been suggested. An efficient surplus sing device has next been described and compared with other devices. In conclusion it has been suggested that the most efficient and at the same time economical arrangement will be a combination of devices. In conclusion it has been suggested will be a combination of crest gate, volute siphons and high head gates. The appendix gives a list of devices used in dams in various parts of the world.

Unsteady compressible second-order boundary layers at the stagnation point of two-dimensional and axisymmetric bodies

The unsteady laminar compressible boundary-layer flow over two-dimensional and axisymmetric bodies at the stagnation point with mass transfer has been studied for all second-order boundary layer effects when the basic potential flow admits selfsimilarity. The solutions for the governing equations are obtained by using an implicit finite-difference scheme. Computations have been carried out for different values of the parameters characterizing the unsteadiness in the free stream velocity, wall temperature, mass transfer rate and variable gas properties. The results are found to be strongly affected by the unsteadiness in the free stream velocity. For large injection rates the second-orderboundary layer effects may prevail over the first-order boundary layer, but reverse is true for suction. The wall temperature and the variation of the density-viscosity product across the boundary layer appreciably change the skin-friction and heat-transfer rates due to second-order boundary-layer effects.

Parasta ennen : Tasa-arvotyön projektitapaistuminen

This book is a study of equality work, that is, the activities which have involved the promotion of gender equality in Finland. The study focuses on the period when the public sector has become more market-oriented, and business-oriented thinking has penetrated activities that have not traditionally emphasised profit-making. I have asked about the kind of power relations that have led to equality work in Finland. In addition to marketisation, publicly funded projects, especially by the European Union, have permeated the public sector. I have analysed the effects this turn has had on the aims and activities of equality work. Despite marketisation, equality work has remained for decades, and problems related to equality have also been recognised. The question of agency is a central focus of this study. I have analysed the kind of agency that has been offered and possible in equality work. With my previous “equality project career”, I have also participated in the formation of my research subject. This study also represents a description of a researcher taking on the responsibility for being involved in the formation of her own research subject. The study data includes national and EU-level political and governmental documents as well as articles and other publications related to equality issues. The data also includes documents from 99 publicly funded equality projects. Notable research data have been drawn from research interviews with 30 people who have been engaged in equality work in different parts of Finland and who have also worked in publicly funded equality projects. As a research method, I have combined Foucault’s discourse analysis and genealogical analysis as well as deconstructive reading. Political and governmental programmes have called for equality work, such as teaching, training, research and other political influencing in order to promote the political interests of the welfare state. Alliance with the state offers the opportunity to accomplish professionalism and continuity. Although equality work has not achieved similar legitimisation compared to other public sector professions. Equality work has fulfilled the interests of welfare state despite current trends towards marketisation. Publicly and budgetary funded equality work has evolved into business-oriented projects in a situation where the project itself has become a new governing mechanism for society. To analyse this trend, I have developed the concept of projectisation. The concept refers to a form of power that has directed discussions of equality in order to be heard. On the other hand, projectisation has contributed to the visibility of problems related to equality while maintaining heteronormativity and hierarchical order of societal differences, especially of gender, as well as harnessing equality for market use, thereby becoming somewhat useful and productive. Equality has been labelled as women’s work and being something that women do and continuity of the equality work has required a complex form of competence. The persistence of problems concerning equality as well as co-operation between women and the “discourse virtuosity ” of equality work has also opened up opportunities for situational change. Key words: Equality work, project, projectisation, genealogical method, discourse analysis, deconstructive reading, heteronormativity, agency, discourse virtuosity.

Moments of flux in intermediary liability for copyright infringement

This chapter provides an overview of a recent shift in regulatory strategies to address copyright infringement toward enlisting the assistance of general purpose Internet Service Providers. In Australia, the High Court held in 2012 that iiNet, a general purpose ISP, had no legal duty to police what its subscribers did with their internet connections. We provide an overview of three recent developments in Australian copyright law since that decision that demonstrate an emerging shift in the way that obligations are imposed on ISPs to govern the actions of their users without relying on secondary liability. The first is a new privately negotiated industry code that introduces a 'graduated response' system that requires ISPs to pass on warnings to subscribers who receive allegations of infringement. The second involves a recent series of Federal Court cases where rightsholders made a partially successful application to require ISPs to hand over the identifying details of subscribers whose households are alleged to have infringed copyright. The third is a new legislative scheme that will require ISPs to block access to foreign websites that 'facilitate' infringement. We argue that these shifts represent a greater sophistication in approaches to enrolling general purpose intermediaries in the regulatory project. We also suggest that these shifts represent a potentially disturbing trend towards enforcement of copyright law in a way that does not provide strong safeguards for the legitimate constitutional due process interests of users. We conclude with a call for greater attention and research to better understand how intermediaries make decisions when governing the conduct of users, how those decisions may be influenced by both state and non-state actors, and how the rights of individuals to due process can be adequately protected.