A Comparative Study of Electrochemical Kinetic Parameters by the Potential Step Method. Electrode Reactions of CyDTA and EDTA Complexes of Cu(II) at DME

By using the same current-time (I-t) curves, electrochemical kinetic parameters are determined by two methods, (a) using the ratio of current at a given potential to the diffusion-controlled limiting current and (b) curve fitting method, for the reduction of Cu(II)–CyDTA complex. The analysis by the method (a) shows that the rate determining step involves only one electron although the overall reduction of the complex involves two electrons suggesting thereby the stepwise reduction of the complex. The nature of I-t curves suggests the adsorption of intermediate species at the electrode surface. Under these circumstances more reliable kinetic parameters can be obtained by the method (a) compared to that of (b). Similar observations are found in the case of reduction of Cu(II)–EDTA complex.

The Nature, Origins, and Consequences of Finnish Shame-Proneness: A Grounded Theory Study

Although shame is a universal human emotion and is one of the most difficult emotions to overcome, its origins and nature as well as its effects on psychosocial functioning are not well understood or defined. While psychological and spiritual counselors are aware of the effects and consequences of shame for an individual s internal well-being and social life, shame is often still considered a taboo topic and is not given adequate attention. This study aims to explain the developmental process and effects of shame and shame-proneness for individuals and provide tools for practitioners to work more effectively with their clients who struggle with shame. This study presents the empirical foundation for a grounded theory that describes and explains the nature, origins, and consequences of shame-proneness. The study focused on Finnish participants childhood, adolescence and adulthood experiences and why they developed shame-proneness, what it meant for them as children and adolescents and what it meant for them as adults. The data collection phase of this study began in 2000. The participants were recruited through advertisements in local and country-wide newspapers and magazines. Altogether 325 people responded to the advertisements by sending an essay concerning their shame and guilt experiences. For the present study, 135 essays were selected and from those who sent an essay 19 were selected for in-depth interviews. In addition to essays and interviews, participants personal notebooks and childhood hospital and medical reports as well as their scores on the Internalized Shame Scale were analyzed. The development of shame-proneness and significant experiences and events during childhood and adolescence (e.g., health, parenting and parents behavior, humiliation, bullying, neglect, maltreatment and abuse) are discussed and the connections of shame-proneness to psychological concepts such as self-esteem, attachment, perfectionism, narcissism, submissiveness, pleasing others, heightened interpersonal subjectivity, and codependence are explained. Relationships and effects of shame-proneness on guilt, spirituality, temperament, coping strategies, defenses, personality formation and psychological health are also explicated. In addition, shame expressions and the development of shame triggers as well as internalized and externalized shame are clarified. These connections and developments are represented by the core category lack of gaining love, validation and protection as the authentic self. The conclusions drawn from the study include a categorization of shame-prone Finnish people according to their childhood and adolescent experiences and the characteristics of their shame-proneness and personality. Implications for psychological and spiritual counseling are also discussed. Key words: shame, internalized shame, external shame, shame development, shame triggers, guilt, self-esteem, attachment, narcissism, perfectionism, submissiveness, codependence, childhood neglect, childhood abuse, childhood maltreatment, emotional abuse, sexual abuse, spiritual abuse, psychological well-being

Avioliiton teologia Englannin kirkossa ja Suomen evankelis-luterilaisessa kirkossa vuosina 1963-2006

The theology of marriage in the Church of England(CofE) and in the Evangelical Lutheran Church of Finland(ELCF)1963–2006 The method of the study is a systematic analysis of the sources. In the CofE marriage stems from creation, but it is also sacramental, grounded in the theology of love and redemption. Man and woman have a connection between them that is a mystical union in character because of the one between Christ and the Church; therefore every marriage is sacramental. The purposes of marriage have been expressed in a different order than earlier. A caring relationship and sexuality are set before childbirth as the causes of marriage. The remedial cause of marriage is also moved to the background and it cannot be found in the recent wedding formulas. A personal relationship and marriage as a school of faith and love have a central place in the theology of marriage. The theology of love unites the love of God and marriage. In the CofE the understanding of divorce and co-habiting has changed, too. Co-habiting can now be understood as a stage towards marriage. Divorce has been understood as a phenomenon that must be taken as a fact after an irretrievable breakdown of marriage. Thus the church must concentrate on pastoral care after divorce. Similarly, the ELCF also maintains that the order of creation is the origin of marriage as a lifelong institution. This is also an argument for the solemnization of marriage in the church. Faith and grace are not needed for real marriage because marriage is the culmination of reason and natural law. The society defines marriage and the church gives its blessing to the married couples if so requested. Luther’s view of marriage is different from this because he saw marriage as a school of love and faith, similar to CofE. He saw faith as essential to enable the fullfillment of natural law. Marriage in the ELCF is mostly a matter of natural ethics. An ideal form of life is sought through the Golden Rule. This interpretation of marriage means that it does not presuppose Christian education for children to follow. The doctrine of the two kingdoms is definitely essential as background. It has been impugned by scholars, however, as a permanent foundation of marriage. There is a difference between the marriage formulas and the other sources concerning the purposes of marriage in the ELCF. The formulas do not include sexuality, childbirth or children and their education as purposes of marriage. The formulas include less theological vocabulary than in the CofE. The liturgy indicates the doctrine in CofE. In the Lutheran churches there is not any need to express the doctrine in the wedding formulas. This has resulted in less theology of marriage in the formulas. The theology of Luther is no longer any ruling principle in the theology of marriage. The process of continuing change in society refines the terms for marriage more than the theological arguments do.

Production of cast aluminium-graphite particle composites using a pellet method

Copper- and nickel-coated graphite particles can be successfully introduced into aluminium-base alloy melts as pellets to produce cast aluminium-graphite particle composites. The pellets were made by pressing mixtures of nickel- or copper-coated graphite particles and aluminium powders together at pressures varying between 2 and 20 kg mm–2. These pellets were dispersed in aluminium alloy melts by plunging and holding them in the melts using a refractory coated mild steel cone, until the pellets disintegrated and the powders were dispersed. The optimum pressure for the preparation of pellets was 2 to 5 kg mm–2 and the optimum size and percentage of aluminium powder were 400 to 1000mgrm and 35 wt% respectively. Under optimum conditions the recovery of the graphite particles in the castings was as high as 96%, these particles being pushed into the last freezing interdendritic regions. The tensile strength and the hardness of the graphite aluminium alloys made using the pellet method are comparable to those of similar composites made using gas injection or the vortex method. The pellet method however has the advantage of greater reproducibility and flexibility. Dispersion of graphite particles in the matrix of cast aluminium alloys using the pellet method increases their resistance to wear.

Application of the Conjugate Gradient Method to a Problem on Minimum Time Orbit Transfer

This correspondence considers the problem of optimally controlling the thrust steering angle of an ion-propelled spaceship so as to effect a minimum time coplanar orbit transfer from the mean orbital distance of Earth to mean Martian and Venusian orbital distances. This problem has been modelled as a free terminal time-optimal control problem with unbounded control variable and with state variable equality constraints at the final time. The problem has been solved by the penalty function approach, using the conjugate gradient algorithm. In general, the optimal solution shows a significant departure from earlier work. In particular, the optimal control in the case of Earth-Mars orbit transfer, during the initial phase of the spaceship's flight, is found to be negative, resulting in the motion of the spaceship within the Earth's orbit for a significant fraction of the total optimized orbit transfer time. Such a feature exhibited by the optimal solution has not been reported at all by earlier investigators of this problem.

Analytical method for solving a set of inhomogeneous infinite simultaneous equations

It is shown that a method based on the principle of analytic continuation can be used to solve a set of inhomogeneous infinite simultaneous equations encountered in the analysis of surface acoustic wave propagation along the periodically perturbed surface of a piezoelectric medium.

A critical analysis of the shear difference method

The shear difference method which is commonly used for the separation of normal stresses using photoelastic techniques depends on the step-by-step integration of one of the differential equations of equilibrium. It is assumed that the isoclinic and the isochromatic parameters measured by the conventional methods pertain to the state of stress at the midpoint of the light path. In practice, a slice thin enough for the above assumption to be true and at the same time thick enough to give differences in the shear-stress values over the thickness is necessary. The paper discusses the errors introduced in the isoclinic and isochromatic values by the conventional methods neglecting the variation of stresses along the light path. It is shown that while the error introduced in the measurement of the isochromatic parameter may not be serious, the error caused in the isoclinic measurement may lead to serious errors. Since the shear-difference method involves step-by-step integration the error introduced will be of a cumulative nature.

A method for the experimental evaluation of the acoustic characteristics of an engine exhaust system in the presence of mean flow

The paper deals with an exact analysis of standing waves in an impedance tube with mean flow. A method is offered for the experimental evaluation of the various wave parameters. Navier–Stokes equations have been solved for evaluating the volume velocity taking into account mean flow, viscosity, etc. The engine exhaust system has been characterized as an acoustic source with an acoustic pressure and internal impedance. A method is suggested for the evaluation of these hypothetical parameters using the exhaust pipe as an impedance tube.Subject Classification: [43]85.20; [43]20.40.

A novel method of current efficiency determination

A simple and rapid method, based on the open-circuit decay of potential, is described for the determination of the current efficiency with which metals are electrodeposited. The advantages and disadvantages of the method are discussed.

A Modified Dubins Method for Optimal Path Planning of a Miniature Air Vehicle Converging to a Straight Line Path

This paper presents a Dubins model based strategy to determine the optimal path of a Miniature Air Vehicle (MAV), constrained by a bounded turning rate, that would enable it to fly along a given straight line, starting from an arbitrary initial position and orientation. The method is then extended to meet the same objective in the presence of wind which has a magnitude comparable to the speed of the MAV. We use a modification of the Dubins' path method to obtain the complete optimal solution to this problem in all its generality.

A New Method for the Preparation of Sulphuryl Chloro Fluoride

It has been observed that a suspension of sodium fluoride in boiling acetonitrile could be used for the preparation of fluorine compounds such as silicon tetrafluoride [1], thiophosphoryl fluoride [2], sulphur tetrafluoride [3,4], and fluorocyclophosphazenes [5]. This method, when adopted for the fluorination of sulphuryl chloride [6], it is observed that a mixture of sulphuryl fluoride and sulphuryl chloro fluoride is obtained. On the other hand, when lead fluoride is substituted for sodium fluoride, pure sulphuryl chloro fluoride is evolved. Based on this observation, a new method has been standardised for the preparation of a pure sample of sulphuryl chlorofluoride by fluorinating sulphuryl chloride by lead fluoride in acetonitrile medium.

A numerical method for separation of stresses in photo-orthotropic elasticity

A numerical method is suggested for separation of stresses in photo-orthotropic elasticity using the numerical solution of compatibility equation for orthotropic case. The compatibility equation is written in terms of a stress parameter S analogous to the sum of principal stresses in two-dimensional isotropic case. The solution of this equation provides a relation between the normal stresses. The photoelastic data give the shear stress and another relation between the two normal stresses. The accuracy of the numerical method and its application to practical problems are illustrated with examples.

Analysis of vibration of clamped square plates by the Rayleigh-Ritz method with asymptotic solutions from a modified Bolotin method

Estimates of flexural frequencies of clamped square plates are initially obtained by the modified Bolotin's method. The mode shapes in “each direction” are then determined and the product functions of these mode shapes are used as admissible functions in the Rayleigh-Ritz method. The data for the first twenty eigenvalues in each of the three (four) symmetric groups obtained by the (i) Bolotin, (ii) Rayleigh and (iii) Rayleigh-Ritz methods are reported here. The Rayleigh estimates are found to be much closer to the true eigenvalues than the Bolotin estimates. The present product functions are found to be much superior to the conventional beam eigenmodes as admissible functions in the Rayleigh-Ritz method of analysis.

Velocity ratio-cum-transfer matrix method for the evaluation of a muffler with mean flow

The paper deals with a method for the evaluation of exhaust muffers with mean flow. A new set of variables, convective pressure and convective mass velocity, have been defined to replace the acoustic variables. An expression for attenuation (insertion loss) of a muffler has been proposed in terms of convective terminal impedances and a velocity ratio, on the lines of the one existing for acoustic filters. In order to evaluate the velocity ratio in terms of convective variables, transfer matrices for various muffler elements have been derived from the basic relations of energy, mass and momentum. Finally, the velocity ratiocum-transfer matrix method is illustrated for a typical straight-through muffler.