Cooperative production and efficiency

We characterize the sharing rule for which a contribution mechanism achieves efficiency in a cooperative production setting when agents are heterogeneous. The sharing rule bears no resemblance to those considered by the previous literature. We also show for a large class of sharing rules that if Nash equilibrium yields efficient allocations, the production function displays constant returns to scale, a case in which cooperation in production is useless.

The Appraisal of projects with environmental impacts. Efficiency and Sustainability

It is usually assumed that the appraisal of the impacts experienced by present generations does not entail any difficulty. However, this is not true. Moreover, there is not a widely accepted methodology for taking these impacts into account. Some of the controversial issues are: the appropriate value for the discount rate, the choice of the units for expressing the impacts, physical or monetary units -income, consumption or investment- and the valuation of tangible and intangible goods. When approaching the problem of very long term impacts, there is also the problem of valuing the impacts experienced by future generations, through e.g., the use of an intergenerational discount rate. However, if this were the case, the present generation perspective would prevail, as if all the property rights on the resources were owned by them. Therefore, the sustainability requirement should also be incorporated into the analysis. We will analyze these problems in this article and show some possible solutions.

Organisational status and efficiency: the case of the spanish SOE "Paradores"

The purpose of this paper is to provide new evidence on the issue of the effect on public enterprises economic performance of the introduction of some given changes in organisational status and management practices, while keeping the enterprises under public control. Our approach is case study type and relies on comparative efficiency literature. We identify relevant changes on the organisational status of a State owned large hotel group along a period of twenty years, next we measure its annual efficiency indicators, and then evaluate to which extent the observed changes in economic performance can be attributable to the corresponding management reforms carried out. As a result we find that the formally more relevant change in organisational status (the enterprise passing to be a Limited Company), which implied a substantial increase in the enterprise autonomy, did not produce a significant improvement in its economic performance; a finding contrary to what we expected according to agency theory. However, a second relevant organisational change –five years later- when both the principal (government) and the agent (firm’s CEO) changed is consistently related to a significant improvement in economic performance. As a research implication we abide for use more precise agency theory statements; and as a practical implication we argue here that potentialities of improvement brought about by a formal-legal change in the status of the enterprise may require also –in order to actually improve firm’s efficiency- some changes in the firm’s key personal positions: supervisor (principal) and CEO (agent), in the sense that a change to a greater-autonomy for the enterprise it seems should come together a parallel new ‘management culture’. Practical implications Management good practises to apply to other public enterprise’s restructuring in order to improve their efficiency. It’s the first study on organizational changes and efficiency for an important Spanish public enterprise.

Trade of permits for greenhouse gas emissions; bilateral trade need not be the answer

The Kyoto Protocol sets national quotas on CO2 emissions and allows international trade of these quotas. We argue that this trade is characterized by asymmetric, identity-dependent externalities, and show that bilateral trade may not be sufficient for an efficient allocation of emissions. We derive conditions under which bilateral trade does improve the allocation of permits. The conditions are strong. In this sense, we argue that, for emissions permits, market design matters.

Indirect hydrogen analysis by gas chromatography coupled to mass spectrometry (GC-MS).

Gas chromatography (GC) is an analytical tool very useful to investigate the composition of gaseous mixtures. The different gases are separated by specific columns but, if hydrogen (H2 ) is present in the sample, its detection can be performed by a thermal conductivity detector or a helium ionization detector. Indeed, coupled to GC, no other detector can perform this detection except the expensive atomic emission detector. Based on the detection and analysis of H2 isotopes by low-pressure chemical ionization mass spectrometry (MS), a new method for H2 detection by GC coupled to MS with an electron ionization ion source and a quadrupole analyser is presented. The presence of H2 in a gaseous mixture could easily be put in evidence by the monitoring of the molecular ion of the protonated carrier gas. Copyright © 2013 John Wiley & Sons, Ltd.

Validation of an analytical method for nitrous oxide (N2O) laughing gas by headspace gas chromatography coupled to mass spectrometry (HS-GC-MS): Forensic application to a lethal intoxication.

Drug abuse is a widespread problem affecting both teenagers and adults. Nitrous oxide is becoming increasingly popular as an inhalation drug, causing harmful neurological and hematological effects. Some gas chromatography-mass spectrometry (GC-MS) methods for nitrous oxide measurement have been previously described. The main drawbacks of these methods include a lack of sensitivity for forensic applications; including an inability to quantitatively determine the concentration of gas present. The following study provides a validated method using HS-GC-MS which incorporates hydrogen sulfide as a suitable internal standard allowing the quantification of nitrous oxide. Upon analysis, sample and internal standard have similar retention times and are eluted quickly from the molecular sieve 5Å PLOT capillary column and the Porabond Q column therefore providing rapid data collection whilst preserving well defined peaks. After validation, the method has been applied to a real case of N2O intoxication indicating concentrations in a mono-intoxication.

Estudi de la reductibilitat de catalitzadors basats en cobalt i el seu comportament en la reacció de desplaçament de gas d'aigua de CO

Projecte de recerca elaborat a partir d’una estada a la universitat d'Udine, Itàlia, entre setembre i desembre del 2006.S'han caracteritzat mitjançant la reducció a temperatura programada i tests catalítics catalitzadors en pols basats en cobalt i supostats en òxid de zinc i monòlits ceràmics funcionaliltzats també amb cobalt i òxid de zinc. L'addició de promotors (manganès, crom i ferro ) als catalitzadors en pols, preparats per impregnació i precipitació, no afecta significativament ni la temperatura a la qual té lloc la reducció ni al percentatge global de reducció. En els cicles de reducció-oxidació sí que s'observen diferències entre el primer perfil de reducció i els següents, especialment en el cas de la mostra que té ferro com a promotor, on les diferències s'accentuen en cicles successius (fins al quart). S'ha evaluat l'activitat d'aquests catalitzadors en la reacció de desplaçament de gas d'aigua, obtenint uns resultats satisfactoris. Finalment s'han realitzat reduccions a temperatura programada i tests catalítics en la reacció de desplaçament de gas d'aigua amb monòlits funcionalitzats amb cobalt i òxid de zinc (en cap d'ells s'ha introduït promotors). El nivell de conversió assolit és menor que en el cas de catalitzadors en pols, fet que s'associa a la geometria d'aquests sistemes catalítics, però la relació CH4/CO2 és més favorable que en els catalitzadors en pols, el que els converteix en sistemes molt selectius.

Rapid high-performance liquid chromatographic determination with fluorescence detection of furosemide in human body fluids and its confirmation by gas chromatography-mass spectrometry.

Furosemide (FD: Lasix) is a loop diuretic which strongly increases both urine flow and electrolyte urinary excretion. Healthy volunteers were administered 40 mg orally (dissolved in water) and concentrations of FD were determined in serum and urine for up to 6 h for eight subjects, who absorbed water at a rate of 400 ml/h. Quantification was performed by HPLC with fluorescence detection (excitation at 233 nm, emission at 389 nm) with a limit of detection of 5 ng/ml for a 300-microliters sample. The elution of FD was completed within 4 min using a gradient of acetonitrile concentration rising from 30 to 50% in 0.08 M phosphoric acid. The delay to the peak serum concentration ranged from 60 to 120 min. FD was still easily measurable in the sera from all subjects 6 h after administration. In urine, the excretion rates reached their maximum between 1 and 3 h. The total amount of FD excreted in the urine averaged 11.2 mg (range 7.6-14.0 mg), with a mean urine volume of 3024 ml (range 2620-3596 ml). Moreover, the urine density was lower than 1.010 (recommended as an upper limit in doping analysis to screen diuretics) only for 2 h. An additional volunteer was administered 40 mg of FD and his urine was collected over a longer period. FD was still detectable 48 h after intake. Gas chromatography-mass spectrometry with different types of ionization was used to confirm the occurrence of FD after permethylation of the extract. Negative-ion chemical ionization, with ammonia as reactant gas, was found to be the most sensitive method of detection.

Productive efficiency and regulatory reform: The case of vehicle inspection services

Measuring productive efficiency provides information on the likely effects of regulatory reform. We present a Data Envelopment Analysis (DEA) of a sample of 38 vehicle inspection units under a concession regime, between the years 2000 and 2004. The differences in efficiency scores show the potential technical efficiency benefit of introducing some form of incentive regulation or of progressing towards liberalization. We also compute scale efficiency scores, showing that only units in territories with very low population density operate at a sub-optimal scale. Among those that operate at an optimal scale, there are significant differences in size; the largest ones operate in territories with the highest population density. This suggests that the introduction of new units in the most densely populated territories (a likely effect of some form of liberalization) would not be detrimental in terms of scale efficiency. We also find that inspection units belonging to a large, diversified firm show higher technical efficiency, reflecting economies of scale or scope at the firm level. Finally, we show that between 2002 and 2004, a period of high regulatory uncertainty in the sample’s region, technical change was almost zero. Regulatory reform should take due account of scale and diversification effects, while at the same time avoiding regulatory uncertainty.

A computable general equilibrium analysis of the relative price sensitivity required to induce rebound effects in response to an improvement in energy efficiency in the UK economy

In recent years there has been extensive debate in the energy economics and policy literature on the likely impacts of improvements in energy efficiency. This debate has focussed on the notion of rebound effects. Rebound effects occur when improvements in energy efficiency actually stimulate the direct and indirect demand for energy in production and/or consumption. This phenomenon occurs through the impact of the increased efficiency on the effective, or implicit, price of energy. If demand is stimulated in this way, the anticipated reduction in energy use, and the consequent environmental benefits, will be partially or possibly even more than wholly (in the case of ‘backfire’ effects) offset. A recent report published by the UK House of Lords identifies rebound effects as a plausible explanation as to why recent improvements in energy efficiency in the UK have not translated to reductions in energy demand at the macroeconomic level, but calls for empirical investigation of the factors that govern the extent of such effects. Undoubtedly the single most important conclusion of recent analysis in the UK, led by the UK Energy Research Centre (UKERC) is that the extent of rebound and backfire effects is always and everywhere an empirical issue. It is simply not possible to determine the degree of rebound and backfire from theoretical considerations alone, notwithstanding the claims of some contributors to the debate. In particular, theoretical analysis cannot rule out backfire. Nor, strictly, can theoretical considerations alone rule out the other limiting case, of zero rebound, that a narrow engineering approach would imply. In this paper we use a computable general equilibrium (CGE) framework to investigate the conditions under which rebound effects may occur in the Scottish regional and UK national economies. Previous work has suggested that rebound effects will occur even where key elasticities of substitution in production are set close to zero. Here, we carry out a systematic sensitivity analysis, where we gradually introduce relative price sensitivity into the system, focusing in particular on elasticities of substitution in production and trade parameters, in order to determine conditions under which rebound effects become a likely outcome. We find that, while there is positive pressure for rebound effects even where (direct and indirect) demand for energy is very price inelastic, this may be partially or wholly offset by negative income and disinvestment effects, which also occur in response to falling energy prices.

The Relative Efficiency of Automatic and Discretionary Industrial Aid

For the last two decades, the primary instruments for UK regional policy have been discretionary subsidies. Such aid is targeted at “additional” projects - projects that would not have been implemented without the subsidy - and the subsidy should be the minimum necessary for the project to proceed. Discretionary subsidies are thought to be more efficient than automatic subsidies, where many of the aided projects are non-additional and all projects receive the same subsidy rate. The present paper builds on Swales (1995) and Wren (2007a) to compare three subsidy schemes: an automatic scheme and two types of discretionary scheme, one with accurate appraisal and the other with appraisal error. These schemes are assessed on their expected welfare impacts. The particular focus is the reduction in welfare gain imposed by the interaction of appraisal error and the requirements for accountability. This is substantial and difficult to detect with conventional evaluation techniques.

The Estimation of Technical Efficiency Effects Models with an Example Applied to the Thai Manufacturing Sector

This paper does two things. First, it presents alternative approaches to the standard methods of estimating productive efficiency using a production function. It favours a parametric approach (viz. the stochastic production frontier approach) over a nonparametric approach (e.g. data envelopment analysis); and, further, one that provides a statistical explanation of efficiency, as well as an estimate of its magnitude. Second, it illustrates the favoured approach (i.e. the ‘single stage procedure’) with estimates of two models of explained inefficiency, using data from the Thai manufacturing sector, after the crisis of 1997. Technical efficiency is modelled as being dependent on capital investment in three major areas (viz. land, machinery and office appliances) where land is intended to proxy the effects of unproductive, speculative capital investment; and both machinery and office appliances are intended to proxy the effects of productive, non-speculative capital investment. The estimates from these models cast new light on the five-year long, post-1997 crisis period in Thailand, suggesting a structural shift from relatively labour intensive to relatively capital intensive production in manufactures from 1998 to 2002.

Rebound and disinvestment effects in oil consumption and supply resulting from an increase in energy efficiency in the Scottish commercial transport sector

In this paper we use an energy-economy-environment computable general equilibrium (CGE) model of the Scottish economy to examine the impacts of an exogenous increase in energy augmenting technological progress in the domestic commercial Transport sector on the supply and use of energy. We focus our analysis on oil, as the main type of energy input used in commercial transport activity. We find that a 5% increase in energy efficiency in the commercial Transport sector leads to rebound effects in the use of oil-based energy commodities in all time periods, in the target sector and at the economy-wide level. However, our results also suggest that such an efficiency improvement may cause a contraction in capacity in the Scottish oil supply sector. This ‘disinvestment effect’ acts as a constraint on the size of rebound effects. However, the magnitude of rebound effects and presence of the disinvestment effect in the simulations conducted here are sensitive to the specification of key elasticities of substitution in the nested production function for the target sector, particularly the substitutability of energy for non-energy intermediate inputs to production.

Negative rebound and disinvestment effects in response to an improvement in energy efficiency in the UK economy

This paper uses a computable general equilibrium (CGE) framework to investigate the conditions under which rebound effects may occur in response to increases in energy efficiency in the UK national economy. Previous work for the UK has suggested that rebound effects will occur even where key elasticities of substitution in production are set close to zero. The research reported in this paper involves carrying out a systematic sensitivity analysis, where relative price sensitivity is gradually introduced into the system, focusing specifically on elasticities of substitution in production and trade parameters, in order to determine conditions under which rebound effects become a likely outcome. The main result is that, while there is positive pressure for rebound effects even where (direct and indirect) demands for energy are very price inelastic, this may be partially or wholly offset by negative income, competitiveness and disinvestment effects, which also occur in response to falling energy prices. The occurrence of disinvestment effects is of particular interest. These occur where falling energy prices reduce profitability in domestic energy supply sectors, leading to a contraction in capital stock in these sectors, which may in turn lead to rebound effects that are smaller in the long run than in the short run, a result that runs contrary to the predictions of previous theoretical work in this area.

On Measuring the Efficiency of Monetary Policy

Cecchetti et al. (2006) develop a method for allocating macroeconomic performance changes among the structure of the economy, variability of supply shocks and monetary policy. We propose a dual approach of their method by borrowing well-known tools from production theory, namely the Farrell measure and the Malmquist index. Following FÄare et al (1994) we propose a decomposition of the efficiency of monetary policy. It is shown that the global efficiency changes can be rewritten as the product of the changes in macroeconomic performance, minimum quadratic loss, and efficiency frontier.