Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture

Estudo cinético da degradação térmica e catalítica de petróleo pesado usando Al-MCM-41

The mesoporous nanostructured materials have been studied for application in the oil industry, in particular Al-MCM-41, due to the surface area around 800 to 1.000 m2 g-1 and, pore diameters ranging from 2 to 10 nm, suitable for catalysis to large molecules such as heavy oil. The MCM-41 has been synthesized by hydrothermal method, on which aluminum was added, in the ratio Si/Al equal to 50, to increase the generation of active acid sites in the nanotubes. The catalyst was characterized by X-ray diffraction (XRD), surface area by the BET method and, the average pore volume BJH method using the N2 adsorption, absorption spectroscopy in the infrared Fourier Transform (FT-IR) and determination of surface acidity with application of a probe molecule - n-butylamine. The catalyst showed well-defined structural properties and consistent with the literature. The overall objective was to test the Al-MCM-41 as catalyst and thermogravimetric perform tests, using two samples of heavy oil with API º equal to 14.0 and 18.5. Assays were performed using a temperature range of 30-900 ° C and heating ratios (β) ranging from 5, 10 and 20 °C min-1.The aim was to verify the thermogravimetric profiles of these oils when subjected to the action of the catalyst Al- MCM-41. Therefore, the percentage ranged catalyst applied 1, 3, 5, 10 and 20 wt%, and from the TG data were applied two different kinetic models: Ozawa-Flynn-Wall (OFW) and Kissinger-Akahrira-Sunose (KAS).The apparent activation energies found for both models had similar values and were lower for the second event of mass loss known as cracking zone, indicating a more effective performance of Al-MCM-41 in that area. Furthermore, there was a more pronounced reduction in the value of activation energy for between 10 and 20% by weight of the oil-catalyst mixture. It was concluded that the Al-MCM-41 catalyst has applicability in heavy oils to reduce the apparent activation energy of a catalyst-oil system, and the best result with 20% by weight of Al-MCM-41

Degradação térmica e catalítica do resíduo atmosférico de petróleo (RAT), utilizando materiais nanoestruturados do tipo SBA-15

In this work were synthesized and characterized the materials mesoporous SBA-15 and Al- SBA-15, Si / Al = 25, 50 and 75, discovered by researchers at the University of California- Santa Barbara, USA, with pore diameters ranging from 2 to 30 nm and wall thickness from 3.1 to 6.4 nm, making these promising materials in the field of catalysis, particularly for petroleum refining (catalytic cracking), as their mesopores facilitate access of the molecules constituting the oil to active sites, thereby increasing the production of hydrocarbons in the range of light and medium. To verify that the materials used as catalysts were successfully synthesized, they were characterized using techniques of X-ray diffraction (XRD), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). Aiming to check the catalytic activity thereof, a sample of atmospheric residue oil (ATR) from the pole Guamaré-RN was performed the process by means of thermogravimetry and thermal degradation of catalytic residue. Upon the curves, it was observed a reduction in the onset temperature of the decomposition process of catalytic ATR. For the kinetic model proposed by Flynn-Wall yielded some parameters to determine the apparent activation energy of decomposition, being shown the efficiency of mesoporous materials, since there was a decrease in the activation energy for the reactions using catalysts. The ATR was also subjected to pyrolysis process using a pyrolyzer with gas chromatography coupled to a mass spectrometer. Through the chromatograms obtained, there was an increase in the yield of the compounds in the range of gasoline and diesel from the catalytic pyrolysis, with emphasis on Al-SBA-15 (Si / Al = 25), which showed a percentage higher than the other catalysts. These results are due to the fact that the synthesized materials exhibit specific properties for application in the process of pyrolysis of complex molecules and high molecular weight as constituents of the ATR

Reciclagem química de Polietileno utilizando Sílica Mesoporosa tipo SBA-15 avalizada por Termogravimetriae Espectrometria de Massas

The chemical recycling of polyolefins has been the focus of increasing attention owing potential application as a fuel and as source chemicals. The use of plastic waste contributes to the solution of pollution problems.The use of catalysts can enhance the thermal degradation of synthetic polymers, which may be avaliated by Themogravimetry (TG) and mass spectrometry (MS) combined techniques. This work aims to propose alternatives to the chemistry recycling of low-density polyethylene (LDPE) on mesoporous silica type SBA-15 and AlSBA-15.The mesoporous materials type SBA-15 and AlSBA-15 were synthesized through the hydrothermal method starting from TEOS, pseudobohemite, cloridric acid HCl and water. As structure template was used Pluronic P123. The syntheses were accomplished during the period of three days. The best calcination conditions for removal of the organic template (P123) were optimized by thermal analysis (TG/DTG) and through analyses of Xray diffraction (XRD), infrared spectroscopy (FT-IR), nitrogen adsorption and scanning electron microscopy (SEM) was verified that as much the hydrothermal synthesis method as the calcination by TG were promising for the production of mesoporous materials with high degree of hexagonal ordination. The general analysis of the method of Analog Scan was performed at 10oC/min to 500 oC to avoid deterioration of capillary with very high temperatures. Thus, with the results, we observed signs mass/charge more evident and, using the MID method, was obtained curve of evolution of these signals. The addition of catalysis produced a decrease in temperature of polymer degradation proportional to the acidity of the catalyst. The results showed that the mesoporous materials contributed to the formation of compounds of lower molecular weight and higher value in the process of catalytic degradation of LDPE, representing an alternative to chemical recycling of solid waste

Estudo integrado do potencial fitorremediador da Eichhornia crassipes em ambientes naturais e sua utilização para obtenção de extratos proteicos

This study aimed to analyze the phytoremediation potential of Eichhornia crassipes in natural environments, optimize the extraction process of crude protein from plant tissue and, obtain and characterize this process in order to determine its viability of use instead of the protein sources of animal and/or human feed. For this, it has been determined in Apodi/Mossoró river water the concentration of ammonium ions, nitrite, nitrate, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cádmium, lead, and total chromium; It was determined in plant tissue of aquatic macrophytes of Eichhornia crassipes species present in Apodi/Mossoró River the moisture content, ash, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cadmium, lead, total chromium, total nitrogen and crude protein. It was also determined the translocation factor and bioaccumulation of all the quantified elements; It was developed and optimized the extraction procedure of crude protein based on the isoelectric method and a factorial design 24 with repetition; It was extracted and characterized the extract obtained by determining the moisture content, ash, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, cadmium, total nitrogen and crude protein. And finally, it was also characterized the protein extract using Thermogravimetric Analysis (TG), Derived Thermogravimetric (DTG), Differential Scanning Calorimetry (DSC), Infrared Spectroscopy (FT-IR) and jelly-like electrophoresis of polyacrylamide (SDS -PAGE) to assess the their molecular weights/mass. Thus, from the results obtained for the translocation and bioaccumulation factors was found that the same can be used as phytoremediation agent in natural environments of all quantified elements. It was also found that the developed method of extraction and protein precipitation was satisfactory for the purpose of the work, which gave the best conditions of extraction and precipitation of proteins as: pH extraction equal to 13.0, extraction temperature equals 60 ° C, reaction time equals to 30 minutes, and pH precipitation equals to 4.0. As for the extract obtained, the total nitrogen and crude protein were quantified higher than those found in the plant, increasing the crude protein content approximately 116.88% in relation to the quantified contente in the vegetal tissue of macrophyte. The levels of nickel and cadmium were the unique that were found below the detection limit of used the equipment. The electrophoretic analysis allowed us to observe that the protein extract obtained is composed of low polypeptide chains by the molecular and phytochelatins, with 6 and 15 kDa bands. Analysis of TG, DTG, DSC and FT-IR showed similarities in protein content of the obtained extracts based on different collection points and 9 parts of the plant under study, as well as commercial soy protein and casein. Finally, based on all these findings, it was concluded that the obtained extract in this work can be used instead of the protein sources of animal feed should, before that, test its digestibility. As human supplementation, it is necessary to conduct more tests associated with the optimization process in the sense of removing undesirable components and constant monitoring of the water body and the raw material used

Comportamento de sementes de cultivares de soja, submetidos a diferentes períodos de envelhecimento acelerado

Accelerated aging test is an important procedure to be used, beyond other aim, for breeding programs to select cultivars with storage and development potential under high relative humidity and temperature. At accelerated aging test in soybean seeds, the temperature and time of exhibition they were not still totally established, factors that cause divergence among the researchers, mainly with relationship to the most appropriate periods. The aim was to evaluate the behavior of soybean seeds submitted to accelerated aging test. Seeds of the varieties IAC-15, CAC-1, FT-Estrela and IAC-Foscarin 31 were submitted to germination test, electrical conductivity and accelerated aging (41 degrees C, during 44, 48, 52, 56, 60, 64, 68, 72 and 76 hours). There are differences among cultivars evaluated in relation to accelerated aging test sensibilility; the cultivars are sensibles to increasing the exposition time; the accelerated aging test can be used to select cultivars in breeding programs; the cultivar FT-Estrela can be sowed at regions with high temperature and humidity.

Ensaio comparativo de cultivares de soja em época convencional em Selvíria, MS: características agronômicas e produtividade

The performance evaluation it's an important procedure for recommendation of a cultivar to an specific region, because the better adapted will present superior development and bigger level of productivity. The work aimed evaluates the behavior of soybean cultivars IAC 15-1, IAC 18, IAC 20, BRS 133, FT-2000, KI-S 602 RCH, MT/BRS-55 (Uirapuru), MT/BR-45 (Paiaguas), MT/BRS-51 (Xingu), KI-S 801, MSOY 7701, MT/BR-49 (Pioneer), Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 65 (Itapoty), Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 64 (Ponta Pora), Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 61, IAC 8-2, IAC 19, Crystalline FT RCH, KI-S 702, IAC Foscarin 31, IAC-PL1 and MT/BRS-46 (Conquista), related to agronomical characteristics of plants (cycle, height, height of first beans insertion and stand) and productivity of grains, when sowed in conventional time. The experimental design was randomized blocks with four replicates, and the averages compared with Tukey Test (5%). It is viable soybean production at Selviria, MS, because practically all cultivars evaluated are adapted to the soil and climate conditions of that area. To cultivar KI-S 801, the use of smaller stand to the observed in that work it can avoid lodging. Caution should be had to use cultivar MT/BRS-55 (Uirapuru).

Torque, myoeletric sygnal and heart rate responses during concentric and eccentric exercises in older men

Background: The literature reports that the eccentric muscular action produces greater force and lower myoelectric activity than the concentric muscular action, while the heart rate (HR) responses are bigger during concentric contraction. Objectives: To investigate the maximum average torque (MAT), surface electromyographic (SEMG) and the heart rate (HR) responses during different types of muscular contraction and angular velocities in older men. Methods: Twelve healthy men (61.7 +/- 1.6years) performed concentric (C) and eccentric (E) isokinetic knee extension-flexion at 60 degrees/s and 120 degrees/s. SEMG activity was recorded from vastus lateralis muscle and normalized by Root Mean Square-RMS (mu V) of maximal isometric knee extension at 60 degrees. HR (beats/min) and was recorded at rest and throughout each contraction. The data were analyzed by the Friedman test for repeated measures with post hoc Dunn's test (p<0.05). Results: The median values of MAT (N.m/kg) was smaller and the RMS (mu V) was larger during concentric contraction (C60 degrees/s=2.80 and 0.99; C120 degrees/s=2.46 and 1.0) than eccentric (E60 degrees/s=3.94 and 0.85; E120 degrees/s=4.08 and 0.89), respectively. The HR variation was similar in the four conditions studied. Conclusion: The magnitude of MAT and RMS responses in older men were dependent of the nature of the muscular action and independent of the angular velocity, whereas HR response was not influenced by these factors.

Farelo de trigo e complexo enzimático na alimentação de frangas de reposição

Foram avaliados os efeitos da inclusão do farelo de trigo (FT) com e sem a suplementação da ração com um complexo enzimático (CE), composto de amilase, protease e celulase, sobre o desempenho de frangas semipesadas (15 semanas de idade) e seu efeito residual na produção de ovos. Foram utilizadas 288 frangas, distribuídas em delineamento inteiramente casualizado, em esquema fatorial 4X2, sendo quatro níveis de FT e dois níveis de um CE na ração: 0 (controle), 10, 20 e 30% X suplementação com 0 ou 50g de um CE/100 kg de ração, resultando em oito tratamentos, com seis repetições. Na fase de crescimento, o consumo de ração, o ganho de peso, a conversão alimentar e o peso vivo foram melhores para as aves que receberam as dietas isentas de FT. A adição do CE diminuiu o consumo de ração nas dietas com 0 e 30% de FT. Durante a fase de produção, o uso do CE na ração de recria sem FT aumentou o peso vivo das aves, mas reduziu no nível de 30% de FT. A produção de ovos diminuiu no nível de 20% de FT quando a dieta foi suplementada com o CE. As conversões alimentares no nível de 10% de FT foram semelhantes ao controle. Observou-se efeito quadrático do nível de FT sobre a conversão por massa de ovos, que foi melhor com 8,01%. Portanto, recomenda-se até 8,01% de inclusão do farelo de trigo na ração de poedeiras semipesadas de 15 a 19 semanas de idade.

Farelo de trigo na alimentação de poedeiras semipesadas na fase de recria

O estudo foi conduzido com o objetivo de avaliar os efeitos da inclusão de farelo de trigo (FT) na ração sobre o desempenho de frangas semipesadas nas fases de recria 1 (7 a 14 semanas de idade) e recria 2 (15 a 19 semanasde idade) e seu efeito residual durante a fase inicial de produção de ovos. Foram utilizadas 160 frangas Lohmann Brown distribuídas em delineamento inteiramente casualizado, com quatro níveis de FT na ração: 0 (controle), 10, 20 e 30%, que resultaram em quatro tratamentos, com cinco repetições de oito aves na fase de recria 1. Ao completarem 14 semanas, as aves foram transferidas para gaiolas de arame galvanizado, redistribuídas em seis repetições de seis aves. Utilizaram-se 144 aves e descartaram-se, aleatoriamente, quatro aves por tratamento, constituindo a fase de recria 2. A adição de FT diminuiu linearmente o peso vivo final e o ganho de peso, resultando em reduções de 1,15 e 0,03 g, respectivamente, para cada 1% de inclusão de FT na ração. O consumo de água aumentou de forma quadrática e cresceu, em valores absolutos, com o aumento de 0 a 30% de farelo de trigo. A cada aumento de 1% de FT na ração, a idade das aves ao primeiro ovo elevou aproximadamente 0,6 dia e o peso do ovo em 0,22 g. A inclusão de farelo de trigo na ração reduz a taxa de crescimento de frangas, atrasa o início da postura, mas melhora o peso inicial dos ovos em relação a dietas à base de milho e de farelo de soja.

Correlações simples entre as medidas de ultra-som e a composição da carcaça de bovinos jovens

Neste estudo avaliaram-se as correlações entre as medidas ultra-sonográficas e as características de carcaça de 115 bovinos jovens (Nelore, ½ Angus Nelore, ½ Simental Nelore e Canchim), com peso inicial médio de 329 kg e dois tamanhos à maturidade (pequeno e grande), em um sistema de produção do novilho superprecoce. Aos 120 dias de confinamento, foram realizadas a pesagem e medida da área de olho-de-lombo (AOL) e da gordura subcutânea (ECG), via ultra-sonografia. Após o abate, foram coletadas as medidas de AOL e ECG na carcaça e os pesos de traseiro, dianteiro e cortes cárneos comerciais, determinando-se também a composição corporal dos animais. Foram calculados os rendimentos de carcaça, cortes cárneos, traseiro, da AOL ultra-som por 100 kg de PV e da AOL carcaça por 100 kg de peso de carcaça. Dados da composição da carcaça indicaram alta deposição muscular nos animais ½ Simental Nelore e Canchim e expressiva deposição de tecido adiposo nos animais Nelore. No entanto, os animais ½ Angus Nelore mostraram-se mais apropriados para confinamento no sistema de produção do superprecoce, pois equilibraram musculosidade e gordura de acabamento. Os resultados demonstraram que a AOL tem relação com a musculosidade da carcaça e que, à medida que há seleção para o incremento desta característica, ocorre diminuição da ECG, como resultado da correlação negativa da ECG com a porcentagem de traseiro e AOL. Não foi observada diferença na composição entre os dois grupos de tamanho à maturidade, provavelmente em razão da pequena variação entre eles. Como as correlações envolvendo a AOL e a ECG por ultra-som e as mesmas medidas na carcaça apresentam resultados similares, validou-se a utilização da técnica da ultra-sonografia como alternativa para predição das características da carcaça de bovinos.

Ultra-sonografia para predição da composição da carcaça de bovinos jovens

Neste estudo, avaliou-se a utilização da ultra-sonografia como técnica para predição da composição da carcaça de 115 bovinos jovens (Nelore, ½ Angus Nelore, ½ Simental Nelore e Canchim), com peso inicial médio de 329 kg, de dois tamanhos à maturidade (pequeno e grande), criados no sistema de produção do novilho superprecoce. Após 120 dias de confinamento, foram realizadas a pesagem e a medida da área de olho-de-lombo (AOL) e da gordura subcutânea (ECG), via ultra-sonografia. Após o abate, foram registradas as medidas de AOL e ECG na carcaça, os pesos de traseiro, dianteiro, cortes cárneos comerciais e a composição corporal dos animais. Foram calculados os rendimentos de carcaça, de cortes cárneos e de traseiro, não se observando diferença na composição entre os dois grupos de tamanho à maturidade, provavelmente em razão da pequena variação entre eles. Embora a ultra-sonografia não tenha apresentado alta precisão na predição da musculosidade da carcaça e do rendimento de cortes cárneos, os coeficientes de determinação das equações de predição da composição da carcaça foram semelhantes, e algumas vezes superiores (quantidade de ossos), aos obtidos nas equações em que se utilizaram as medidas na carcaça após o abate, demonstrando que a ultra-sonografia pode ser utilizada para predição da composição da carcaça de bovinos de corte em determinadas situações.

Ultrasonography as a predicting tool for carcass traits of young bulls

O desenvolvimento de técnicas não invasivas e não destrutivas para a avaliação da composição e qualidade de carcaça em animais tem mobilizado consideráveis recursos em pesquisa. A ultra-sonografia aparece neste contexto como uma técnica viável, confiável e de custo aceitável para esta função. No presente trabalho foi avaliada a técnica de ultra-sonografia em tempo real como ferramenta para predição da área de olho-de-lombo (AOL) e espessura da camada de gordura subcutânea (ECG) a partir de imagens tomadas em animais vivos, quando comparadas com as medições na carcaça. Foram utilizados 115 bovinos jovens (30, ½ Angus x Nellore; 30, ½ Canchim x Nellore; 30, ½ Simental x Nellore, e 25 Nellores), com peso inicial médio de 329 kg e de dois tamanhos à maturidade (pequeno e grande), no sistema de produção do novilho superprecoce. As medidas de ultra-sonografia foram realizadas a cada 28 dias totalizando quatro medições até o final do confinamento. A precisão da predição aumentou em função da proximidade da data do abate, sendo máxima na quarta medida (R²= 0,68 para AOL e 0,82 para ECG). Houve efeito de grupo genético e de medida ultra-sonográfica para ECG. O tamanho corporal não teve efeito sobre nenhuma das características estudadas.

Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of long-term water immersion on the fracture toughness of denture base and reline resins

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)