Investigation of mediated oxidation of ascorbic acid by ferrocenemethanol using large-amplitude fourier transformed ac voltammetry under quasi-reversible electron-transfer conditions at an indium tin oxide electrode

The ability of the technique of large-amplitude Fourier transformed (FT) ac voltammetry to facilitate the quantitative evaluation of electrode processes involving electron transfer and catalytically coupled chemical reactions has been evaluated. Predictions derived on the basis of detailed simulations imply that the rate of electron transfer is crucial, as confirmed by studies on the ferrocenemethanol (FcMeOH)-mediated electrocatalytic oxidation of ascorbic acid. Thus, at glassy carbon, gold, and boron-doped diamond electrodes, the introduction of the coupled electrocatalytic reaction, while producing significantly enhanced dc currents, does not affect the ac harmonics. This outcome is as expected if the FcMeOH (0/+) process remains fully reversible in the presence of ascorbic acid. In contrast, the ac harmonic components available from FT-ac voltammetry are predicted to be highly sensitive to the homogeneous kinetics when an electrocatalytic reaction is coupled to a quasi-reversible electron-transfer process. The required quasi-reversible scenario is available at an indium tin oxide electrode. Consequently, reversible potential, heterogeneous charge-transfer rate constant, and charge-transfer coefficient values of 0.19 V vs Ag/AgCl, 0.006 cm s (-1) and 0.55, respectively, along with a second-order homogeneous chemical rate constant of 2500 M (-1) s (-1) for the rate-determining step in the catalytic reaction were determined by comparison of simulated responses and experimental voltammograms derived from the dc and first to fourth ac harmonic components generated at an indium tin oxide electrode. The theoretical concepts derived for large-amplitude FT ac voltammetry are believed to be applicable to a wide range of important solution-based mediated electrocatalytic reactions.

The active site behaviour of electrochemically synthesised gold nanomaterials

Even though gold is the noblest of metals, a weak chemisorber and is regarded as being quite inert, it demonstrates significant electrocatalytic activity in its nanostructured form. It is demonstrated here that nanostructured and even evaporated thin films of gold are covered with active sites which are responsible for such activity. The identification of these sites is demonstrated with conventional electrochemical techniques such as cyclic voltammetry as well as a large amplitude Fourier transformed alternating current (FT-ac) method under acidic and alkaline conditions. The latter technique is beneficial in determining if an electrode process is either Faradaic or capacitive in nature. The observed behaviour is analogous to that observed for activated gold electrodes whose surfaces have been severely disrupted by cathodic polarisation in the hydrogen evolution region. It is shown that significant electrochemical oxidation responses occur at discrete potential values well below that for the formation of the compact monolayer oxide of bulk gold and are attributed to the facile oxidation of surface active sites. Several electrocatalytic reactions are explored in which the onset potential is determined by the presence of such sites on the surface. Significantly, the facile oxidation of active sites is used to drive the electroless deposition of metals such as platinum, palladium and silver from their aqueous salts on the surface of gold nanostructures. The resultant surface decoration of gold with secondary metal nanoparticles not only indicates regions on the surface which are rich in active sites but also provides a method to form interesting bimetallic surfaces.

Structural characterization and vibrational spectroscopy of the arsenate mineral wendwilsonite

In this paper, we have investigated on the natural wendwilsonite mineral with the formulae Ca2(Mg,Co)(AsO4)2⋅2(H2O). Raman spectroscopy complimented with infrared spectroscopy has been used to determine the molecular structure of the wendwilsonite arsenate mineral. A comparison is made with the roselite mineral group with formula Ca2B(AsO4)2⋅2H2O (where B may be Co, Fe2+, Mg, Mn, Ni, Zn). The Raman spectra of the arsenate related to tetrahedral arsenate clusters with stretching region shows strong differences between that of wendwilsonite and the roselite arsenate minerals which is attributed to the cation substitution for calcium in the structure. The Raman arsenate (AsO4)3− stretching region shows strong differences between that of wendwilsonite and the roselite arsenate minerals which is attributed to the cation substitution for calcium in the structure. In the infrared spectra complexity exists of multiple to tetrahedral (AsO4)3− clusters with antisymmetric stretching vibrations observed indicating a reduction of the tetrahedral symmetry. This loss of degeneracy is also reflected in the bending modes. Strong Raman bands around 450 cm−1 are assigned to ν4 bending modes. Multiple bands in the 350–300 cm−1 region assigned to ν2 bending modes provide evidence of symmetry reduction of the arsenate anion. Three broad bands for wendwilsonite found at 3332, 3119 and 3001 cm−1 are assigned to OH stretching bands. By using a Libowitzky empirical equation, hydrogen bond distances of 2.65 and 2.75 Å are estimated. Vibrational spectra enable the molecular structure of the wendwilsonite mineral to be determined and whilst similarities exist in the spectral patterns with the roselite mineral group, sufficient differences exist to be able to determine the identification of the minerals.

Cyclone intensity categories

The weather forecast centers in Australia and many other countries use a scale of cyclone intensity categories (categories 1-5) in their cyclone advisories, which are considered to be indicative of the cyclone damage potential. However, this scale is mainly based on maximum gust wind speeds. In a recent research project involving computer modeling of cyclonic wind forces on roof claddings and fatigue damage to claddings, it was found that cyclone damage not only depends on the maximum gust wind speed, but also on two other cyclone parameters, namely, the forward speed and radius to maximum winds. This paper describes the computer model used in predicting the cyclone damage to claddings and investigates the damage potential of a cyclone as a function of all the relevant cyclone parameters, based on which it attempts to refine the current scale of cyclone intensity categories.

Validity and reliability of 3-minute nutrition screening (3-MinNS)performed by nurses on oncology and surgical patients

Background Nutrition screening is usually administered by nurses. However, most studies on nutrition screening tools have not used nurses to validate the tools. The 3-Minute Nutrition Screening (3-MinNS) assesses weight loss, dietary intake and muscle wastage, with the composite score of each used to determine risk of malnutrition. The aim of the study was to determine the validity and reliability of 3-MinNS administered by nurses, who are the intended assessors. Methods In this cross sectional study, three ward-based nurses screened 121 patients aged 21 years and over using 3-MinNS in three wards within 24 hours of admission. A dietitian then assessed the patients’ nutritional status using Subjective Global Assessment within 48 hours of admission, whilst blinded to the results of the screening. To assess the reliability of 3-MinNS, 37 patients screened by the first nurse were re-screened by a second nurse within 24 hours, who was blinded to the results of the first nurse. The sensitivity, specificity and best cutoff score for 3-MinNS were determined using the Receiver Operator Characteristics Curve. Results The best cutoff score to identify all patients at risk of malnutrition using 3-MinNS was three, with sensitivity of 89% and specificity of 88%. This cutoff point also identified all (100%) severely malnourished patients. There was strong correlation between 3-MinNS and SGA (r=0.78, p<0.001). The agreement between two nurses conducting the 3-MinNS tool was 78.3%. Conclusion 3-Minute Nutrition Screening is a valid and reliable tool for nurses to identify patients at risk of malnutrition.

Ratchetting of railhead in the vicinity of the gap of the insulated rail joints

Insulated Rail Joints (IRJs) are designed to electrically isolate two rails in rail tracks to control the signalling system for safer train operations. Unfortunately the gapped section of the IRJs is structurally weak and often fails prematurely especially in heavy haul tracks, which adversely affects service reliability and efficiency. The IRJs suffer from a number of failure modes; the railhead ratchetting at the gap is, however, regarded as the root cause and attended to in this thesis. Ratchetting increases with the increase in wheel loads; in the absence of a life prediction model, effective management of the IRJs for increased wagon wheel loads has become very challenging. Therefore, the main aim of this thesis is to determine method to predict IRJs' service life. The distinct discontinuity of the railhead at the gap makes the Hertzian theory and the rolling contact shakedown map, commonly used in the continuously welded rails, not applicable to examine the metal ratchetting of the IRJs. Finite Element (FE) technique is, therefore, used to explore the railhead metal ratchetting characteristics in this thesis, the boundary conditions of which has been determined from a full scale study of the IRJ specimens under rolling contact of the loaded wheels. A special purpose test set up containing full-scale wagon wheel was used to apply rolling wheel loads on the railhead edges of the test specimens. The state of the rail end face strains was determined using a non-contact digital imaging technique and used for calibrating the FE model. The basic material parameters for this FE model were obtained through independent uniaxial, monotonic tensile tests on specimens cut from the head hardened virgin rails. The monotonic tensile test data have been used to establish a cyclic load simulation model of the railhead steel specimen; the simulated cyclic load test has provided the necessary data for the three decomposed kinematic hardening plastic strain accumulation model of Chaboche. A performance based service life prediction algorithm for the IRJs was established using the plastic strain accumulation obtained from the Chaboche model. The predicted service lives of IRJs using this algorithm have agreed well with the published data. The finite element model has been used to carry out a sensitivity study on the effects of wheel diameter to the railhead metal plasticity. This study revealed that the depth of the plastic zone at the railhead edges is independent of the wheel diameter; however, large wheel diameter is shown to increase the IRJs' service life.

Gifted students with a reading disability : the impact of lived experience

Gifted students who have a reading disability have learning characteristics that set them apart from their peers. The ability to read impacts upon all areas of the formal curriculum in which print-based texts are common. Therefore, the full intellectual development of gifted students with a reading disability can be repressed because their access to learning opportunities is reduced. When the different learning needs caused by concomitant giftedness and reading disability are not met, it can have serious implications for both academic achievement and the social-emotional wellbeing of these students. In order to develop a deeper understanding of this vulnerable group of students, this study investigated the learning characteristics of gifted students with a reading disability. Furthermore, it investigated how the learning characteristics of these students impact upon their lived experiences. Since achievement and motivation have been shown to be closely linked to self-efficacy, self-efficacy theory underpinned the conceptual framework of the study. The study used a descriptive case study approach to document the lived experiences of gifted students with a reading disability. Nine participants aged between 11 and 18, who were formally identified as gifted with a reading disability, took part in the study. Data sources in the case study database included: cognitive assessments, such as WISC assessments, Stanford Binet 5, or the Raven's Standard Progressive Matrices; the WIAT II reading assessment; the Reader Self-Perception Scale; document reviews; parent and teacher checklists designed to gain information about the students' learning characteristics; and semi-structured interviews with students. The study showed that gifted students with a reading disability display a complex profile of learning strengths and weaknesses. As a result, they face a daily struggle of trying to reconcile the confusion of being able to complete some tasks to a high level, while struggling to read. The study sheds light on the myriad of issues faced by the students at school. It revealed that when the particular learning characteristics and needs of gifted students with a reading disability are recognised and met, these students can experience academic success, and avoid the serious social-emotional complications cited in previous studies. Indeed, rather than suffering from depression, disengagement from learning, and demotivation, these students were described as resilient, independent, determined, goal oriented and motivated to learn and persevere. Notably, the students in the study had developed effective coping strategies for dealing with the daily challenges they faced. These strategies are outlined in the thesis together with the advice students offered for helping other gifted students with a reading disability to succeed. Their advice is significant for all teachers who wish to nurture the potential of those students who face the challenge of being gifted with a reading disability, and for the parents of these students. This research advances knowledge pertaining to the theory of self-efficacy, and self-efficacy in reading specifically, by showing that although gifted students with a reading disability have low self-efficacy, the level is not the same for all aspects of reading. Furthermore, despite low self-efficacy in reading these students remained motivated. The study also enhances existing knowledge in the areas of gifted education and special education because it documents the lived experience of gifted students with a specific learning disability in reading from the students' perspectives. Based on a synthesis of the literature and research findings, an Inclusive Pathway Model is proposed that describes a framework to support gifted students with a reading disability so that they might achieve, and remain socially and emotionally well-adjusted. The study highlights the importance of clear identification protocols (such as the use of a range of assessment sources, discussions with students and parents, and an awareness of the characteristics of gifted students with a reading disability) and support mechanisms for assisting students (for example, differentiated reading instruction and the use of assistive technology).

Mobile phone use and driving : the message is just not getting through

Previous research has shown that mobile phone use while driving can increase crash risk fourfold while texting results in 23 times greater crash risk for heavy vehicle drivers. However, mobile phone use has changed in recent years with the functional capabilities of smart phones to now also include a range of other common behaviours while driving such as using Facebook, emailing, the use of ‘apps’, and GPS. Research continues to show performance decrements for many such behaviours while driving, however many Australians still openly admit to illegal mobile phone use while driving despite ongoing enforcement efforts and public awareness campaigns. Of most concern are young drivers. ‘Apps’ available to restrict mobile phone use while in motion do not prevent use while a driver is stopped at traffic lights, so are therefore not a wholly viable solution. Vehicle manufacturers continue to develop in-vehicle technology to minimise distraction, however communication with the ‘outside world’ while driving is also perhaps a strong selling point for vehicles. Hence, the safety message that drivers should focus on the driving task solely and not use communication devices is unlikely to ever be internalised by many drivers. This paper reviews the available literature on the topic and argues that a better understanding of perceptions of mobile phone use while driving and motives for use are required to inform public awareness campaign development for specific road user groups. Additionally, illegal phone use while driving may be reinforced by not being apprehended (punishment avoidance), therefore stronger deterrence-focussed messages may also be beneficial.

Comparison between electrically-evoked and voluntary wrist movements on sensorimotor and prefrontal cortical activation : A multi-channel time domain fNIRS study

Neuromuscular electrical stimulation (NMES) has been consistently demonstrated to improve skeletal muscle function in neurological populations with movement disorders, such as poststroke and incomplete spinal cord injury (Vanderthommen and Duchateau, 2007). Recent research has documented that rapid, supraspinal central nervous system reorganisation/neuroplastic mechanisms are also implicated during NMES (Chipchase et al., 2011). Functional neuroimaging studies have shown NMES to activate a network of sub-cortical and cortical brain regions, including the sensorimotor (SMC) and prefrontal (PFC) cortex (Blickenstorfer et al., 2009; Han et al., 2003; Muthalib et al., 2012). A relationship between increase in SMC activation with increasing NMES current intensity up to motor threshold has been previously reported using functional MRI (Smith et al., 2003). However, since clinical neurorehabilitation programmes commonly utilise NMES current intensities above the motor threshold and up to the maximum tolerated current intensity (MTI), limited research has determined the cortical correlates of increasing NMES current intensity at or above MTI (Muthalib et al., 2012). In our previous study (Muthalib et al., 2012), we assessed contralateral PFC activation using 1-channel functional near infrared spectroscopy (fNIRS) during NMES of the elbow flexors by increasing current intensity from motor threshold to greater than MTI and showed a linear relationship between NMES current intensity and the level of PFC activation. However, the relationship between NMES current intensity and activation of the motor cortical network, including SMC and PFC, has not been clarified. Moreover, it is of scientific and clinical relevance to know how NMES affects the central nervous system, especially in comparison to voluntary (VOL) muscle activation. Therefore, the aim of this study was to utilise multi-channel time domain fNIRS to compare SMC and PFC activation between VOL and NMESevoked wrist extension movements.

How to meet stakeholders' expectations, not manage them?

Evaluation practices in the higher education sector have been criticised for having unclear purpose and principles; ignoring the complexity and changing nature of learning and teaching and the environments in which they occur; relying almost exclusively on student ratings of teachers working in classroom settings; lacking reliability and validity; using data for inappropriate purposes; and focusing on accountability and marketing rather than the improvement of learning and teaching. In response to similar criticism from stakeholders, in 2011 Queensland University of Technology began a project, entitled REFRAME, to review its approach to evaluation, particularly the student survey system it had been using for the past five years. This presentation will outline the scholarly, evidence based methodology used to undertake institution-wide change, meet the needs of stakeholders suitable to the cultural needs of the institution. It is believed that this approach is broadly applicable to other institutions contemplating change with regard to evaluation of learning and teaching.

Lung health care for Aboriginal and Torres Strait Islander Queenslanders : breathing easy is not so easy

Objectives In Aboriginal and Torres Strait Islander peoples in Queensland, to (a) determine the disease burden of common chronic lung diseases and (b) identify areas of need with respect to lung health services. Methods Literature reviews and analyses of hospitalisation and mortality data were used to describe disease epidemiology and available programs and services. Key stakeholder interviews and an online survey of health professionals were used to evaluate lung health services across the state and to identify services, needs and gaps. Results Morbidity and mortality from respiratory diseases in the Indigenous population is substantially higher than the non-Indigenous population across all age groups and regions. There are inadequate clinical services and resources to address disease prevention, detection, intervention and management in an evidence-based and culturally acceptable fashion. There is a lack of culturally appropriate educational resources and management programs, insufficient access to appropriately engaged Indigenous health professionals, a lack of multi-disciplinary specialist outreach teams, fragmented information systems and inadequate coordination of care. Conclusions Major initiatives are required at all levels of the healthcare system to adequately address service provision for Indigenous Queenslanders with lung diseases, including high quality research to investigate the causes for poor lung health, which are likely to be multifactorial.

Influence of drying conditions on the moisture diffusion and fluidization quality during multi-stage fluidized bed drying of bovine intestine for pet food

In order to establish the influence of the drying air characteristics on the drying performance and fluidization quality of bovine intestine for pet food, several drying tests have been carried out in a laboratory scale heat pump assisted fluid bed dryer. Bovine intestine samples were heat pump fluidized bed dried at atmospheric pressure and at temperatures below and above the materials freezing points, equipped with a continuous monitoring system. The investigation of the drying characteristics have been conducted in the temperature range −10 to 25 ◦C and the airflow in the range 1.5–2.5 m/s. Some experiments were conducted as single temperature drying experiments and others as two stage drying experiments employing two temperatures. An Arrhenius-type equation was used to interpret the influence of the drying air temperature on the effective diffusivity, calculated with the method of slopes in terms of energy activation, and this was found to be sensitive to the temperature. The effective diffusion coefficient of moisture transfer was determined by the Fickian method using uni-dimensional moisture movement in both moisture, removal by evaporation and combined sublimation and evaporation. Correlations expressing the effective moisture diffusivity and drying temperature are reported. Bovine particles were characterized according to the Geldart classification and the minimum fluidization velocity was calculated using the Ergun Equation and generalized equation for all drying conditions at the beginning and end of the trials. Walli’s model was used to categorize stability of the fluidization at the beginning and end of the dryingv for each trial. The determined Walli’s values were positive at the beginning and end of all trials indicating stable fluidization at the beginning and end for each drying condition.

What is an expert? A systems perspective on expertise

1. Expert knowledge continues to gain recognition as a valuable source of information in a wide range of research applications. Despite recent advances in defining expert knowledge, comparatively little attention has been given to how to view expertise as a system of interacting contributory factors, and thereby, to quantify an individual’s expertise. 2. We present a systems approach to describing expertise that accounts for many contributing factors and their interrelationships, and allows quantification of an individual’s expertise. A Bayesian network (BN) was chosen for this purpose. For the purpose of illustration, we focused on taxonomic expertise. The model structure was developed in consultation with professional taxonomists. The relative importance of the factors within the network were determined by a second set of senior taxonomists. This second set of experts (i.e. supra-experts) also provided validation of the model structure. Model performance was then assessed by applying the model to hypothetical career states in the discipline of taxonomy. Hypothetical career states were used to incorporate the greatest possible differences in career states and provide an opportunity to test the model against known inputs. 3. The resulting BN model consisted of 18 primary nodes feeding through one to three higher-order nodes before converging on the target node (Taxonomic Expert). There was strong consistency among node weights provided by the supra-experts for some nodes, but not others. The higher order nodes, “Quality of work” and “Total productivity”, had the greatest weights. Sensitivity analysis indicated that although some factors had stronger influence in the outer nodes of the network, there was relatively equal influence of the factors leading directly into the target node. Despite differences in the node weights provided by our supra-experts, there was remarkably good agreement among assessments of our hypothetical experts that accurately reflected differences we had built into them. 4. This systems approach provides a novel way of assessing the overall level of expertise of individuals, accounting for multiple contributory factors, and their interactions. Our approach is adaptable to other situations where it is desirable to understand components of expertise.