1000 resultados para Estabilidade de fases
Resumo:
The research addresses the need for detailed geological and geotechnical investigations in pipeline’s design, given the diversity of geological units crossed by these works along its layout, which often extends for hundreds of miles. For its large size, this type of work often goes through different states and regions with very different characteristics in terms of topography, vegetation, geology and geotechnical conditions. For a better use of these investigations in order to avoid unnecessary costs and inefficient results, some authors recommend that steps be taken to study, seeking a progressive detail of the pipeline’s implantation area. The main objective of the study is to describe, analyze and correlate the proposals for geological and geotechnical’s investigation recommended by the authors selected. Nogueira Junior & Marques (1998) suggest that for better effectiveness of geological and geotechnical investigations associated with the deployment of pipelines, different research methods are applied sequentially in five major stages of the building. Rocha et al (2008) recommend that, for the pipeline’s implantation using horizontal directional drilling, investigations are performed in three phases of study, to be developed in coordination with the project stages. For Gelinas & Mathy (2004), when time and budget constraints permit, geotechnical investigations for directional drilling projects for pipelines must be made in four sequential phases. Heinz (2008) suggests that the geotechnical investigations for pipeline’s implantation using horizontal directional drilling at crossings of water bodies are carried out in three successive stages. By the development of research, we could see that all the different proposals recommend studies in sequential phases, starting from a more general scale for a more specific, seeking a progressive understanding of the geological model of the area where you intend to deploy the pipeline
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
As enzimas estão presentes em todas as células vivas, onde exercem a função de catalisadores das reações que compõem as vias catabólicas e anabólicas do metabolismo celular. Esses biocatalisadores são moléculas de proteínas e seu poder catalítico está associado à conformação nativa, que depende de condições específicas de pH, temperatura e força iônica do meio. Os micro-organismos são bastante atrativos para a indústria, pois possibilitam a produção de enzimas por processos fermentativos em larga escala com regularidade necessária e simplicidade na requisição nutricional. Assim, embora alguns biocatalisadores sejam extraídos de tecidos animais e vegetais, as enzimas industriais são, em sua maior parte, obtidas a partir de micro-organismos. Este trabalho teve como objetivo a produção das enzimas lipase e β-glucanase a partir dos fungos Aspergillus niger e Trichoderma reesei, respectivamente, em diferentes meios de cultura, para determinar as condições de maior produção da enzima em questão. As enzimas produzidas em agitador orbital foram obtidas a partir da filtração do produto da fermentação, precipitação com sulfato de amônio e liofilização. Após a produção e precipitação a atividade das enzimas e a concentração de proteínas foram quantificadas, os parâmetros cinéticos foram determinados frente a diferentes pHs, temperaturas e força iônica do meio. A lipase apresentou melhor atividade a 30°C e em pH 6,0. A presença dos íons Mg2+ e Zn2+ levaram a um aumento na atividade da enzima. A β-glucanase apresentou maiores atividades quando submetidas a 37°C e pH 5,0. Os íons Mg2+, Cu2+ e Ca2+ induziram melhor a atividade enzimática.
Resumo:
Aiming to reduce the cost of electrocatalysts and a greater resistance to CO poisoning this work was to study the adsorption and oxidation of carbon monoxide on ordered intermetallic phases AuIn, AuSb2, AuSn, PdSb and PdSn using voltammetric techniques in alkaline electrolyte solution. The results suggest that the AuSn and PdSn intermetallics has some form of resistance to CO poisoning. It is assumed that this behavior is a result of electronic effect and the effect of the third body has been achieved by adding a second metal to Au and Pd. However, further studies should be conducted to confirm this hypothesis as to test these materials as electrocatalysts in the reaction of oxidation of fuels
Resumo:
Volleyball is a sport in which the laterality dominant limb shows superior strength and coordination because of its preferential use. Asymmetrical tendencies during the landing after the jump when striking or blocking actions are predominant for most part of game (ARRUDA; EDUARDO, 2008). Adaptations include imbalance of forces in static and dynamic motions at the knee joint, which increases risk for injury. Also, asymmetries in balance control during jumping and landing associate with a general postural instability that can be observed during static balance tasks. The purpose of this study was to investigate relationship between unequal lower limb strength (muscle imbalance) and postural stability levels in volleyball athletes and non-athletes. Nine female volleyball athletes and 10 active non-athletes participated in this study. Four encouters with participants were scheduled: three encounters in the bodybuilding gymnasium to collect anthropometric measures (weight, height for BMI, thigh circumference, which provided an initial diagnosis about asymmetry), and to perform the isometric strength test (i.e., leg press using a load cell and a force transducer to calculate uni an bilateral strength). The last encounter was in the laboratory where a balance test on a force platform was administered under five test conditions, with three repetitions each: baseline (natural standing position), one-leg standing, right side, with full vision (D_CV), and blindfolded (D_SV), one-leg standing, left side, with full vision (E_CV), and blindfolded (E_SV). The stability levels were evaluated using the path length parameters which was based on the total displacement of the center of pressure (DTCP). . Both groups shows asymmetric strength levels between legs, with better performance for the right leg. An ANOVA three way using the DTCP for the CV condition, legs (D x E), trials (3) with repeated measures for the first two factors and with a between (three)...
Resumo:
Os sistemas nanoestruturados são capazes de aumentar a permeação de um fármaco sem alterar as suas propriedades e direcioná-lo para regiões específicas favorecendo a interação com sistemas biológicos. Algumas formações dos sistemas nanoestruturados cristais líquidos, microemulsões podem permitir a liberação lenta do fármaco o que propicia um efeito mais prolongado da ação deste, aumento da solubilidade e estabilidade de fármacos, capacidade de agir como sistemas reservatórios, diminuição da toxicidade, bem como melhor a biodisponibilidade dos fármacos. A dexametasona (DMA) é um corticóide muito utilizado, mas que possui muitos efeitos colaterais,como eritema,hipertensão arterial,acne,aumento de peso e apetite,entre outros,devido sua capacidade de atravessar o estrato córneo por difusão, assim ele é capaz de alcançar a circulação e causar efeitos colaterais sistêmicos. Para diminuir a ação desses efeitos indesejáveis é preciso controlar a permeação desta classe de fármaco e aumentando a sua retenção cutânea. O objetivo deste trabalho foi avaliar o potencial de sistemas nanoestruturados estabilizados com álcool cetílico etoxilado e propoxilado(PRO) como tensoativo, ácido oléico (AO) ou óleo mineral (OM) como fases oleosas para a administração cutânea de DMA. Estas fases oleosas foram selecionadas por apresentarem características físico-químicas diferentes, bem como promoveram diferenças estruturais em formulações de estudos anteriores. A caracterização por microscopia de luz polarizada mostrou que a dexametasona pouco interfere na estruturação das formulações. A reologia mostrou que as formulações, com ácido oléico como fase oleosa, AO1 e AO2 são as formulações com melhores condições de aplicação cutânea. Os cristais líquido de fase cúbica, foram os que mais foram capazes de solubilizar DMA, além de apresentarem... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Não possui
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The main objectives of this work were to evaluate the antioxidant activity and to determine of an ethanolic ginger extract total phenolic compounds concentration, as well as verifying its behavior by means of the oxidative stability, when added to refined soybean oil in concentrations of 0, 500, 1000, 1500, 2000 and 2500 mg/kg. The maximum antioxidant activity and EC50, concentration of the extract to achieve 50% of the antioxidant activity, value determined by free radical DPPH method were 79.1% and 42.6 g/mL, respectively. The total phenolic compounds concentration, determined to Folin-Ciocalteu method, was 251 mg/g. The induction period of the samples increased according to the augment of the extract concentration in the oil when evaluated using oxidative stability through the Rancimat equipament. It was possible to conclude that the ginger extracts possess effective action against the lipid oxidation and can be applied in foods as natural antioxidant.
Resumo:
Neste artigo descrevemos o comportamento de orações subjetivas e objetivas diretas nas fases arcaica (séculos XIII a XV) e moderna (séculos XVI e XVII) do português. Adotamos o quadro teórico da gramaticalização e dessentencialização de orações e discutimos resultados para os parâmetros tipo semântico do predicado matriz, unidade semântico funcional representada pela oração encaixada e formato da oração encaixada. Observamos, ao longo das sincronias, correlações sistemáticas entre os parâmetros investigados para os dois tipos oracionais. Orações subjetivas apresentam menor variedade de padrões do que orações completivas objetivas, principal diferença a interferir em suas estabilidades sintático-semânticas nos períodos investigados.
Resumo:
The ceramic pigments are colored inorganic substances that during the process of dispersion in the ceramic glazes and subsequent calcination, are stable against physical and chemical attack. Therefore, they are crystalline compounds applied in the ceramic industry for coloring vitreous base. In this study, the Pechini method was used for obtaining the pigment CuCr2O4 with heat treatment at the temperatures of 800, 900 and 1000 ° C. The powder pigments were characterized on their structural, morphological and colorimetric aspects. The thermal analysis conducted on an amorphous precursor in a TG / DTA indicates the weight loss in the entire temperature range investigated, with characteristic exothermic peak of the elimination of the organic composition of the precursor around 300°C. The development of the crystalline phases were investigated by XRD, using a diffractometer with Cu Ka radiation and graphite monochromator, where it was observed the presence of crystalline phases corresponding to Cr2O3 and CuCr2O4.The measurements of the specific surface area of the powders pigments were carried out in an equipment Micromeritcs, model ASAP 2000, using N2 as gas of adsorption/desorption. The colorimetric measurements of the pigments were made in a colorimeter Gretac Macbeth Color-eye spectrophotometer 2180 / 2180UV in CIELAB standards. Based on the obtained results, it can be verified the thermal stability of the powder pigments of green coloration, which enables it as an alternative to the materials currently used in the manufacture of ceramic tiles.
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Zootecnia - FCAV