SysteM of augmented reality for teaching kids: smartkids

As crianças do jardim de infância/pré-escola são um grupo de utilizadores muito especiais, uma vez que se encontram numa fase inicial das suas vidas onde têm de aprender a viver em sociedade, isto é, aprender a ouvir e respeitar as opiniões dos outros, partilhar os mesmos objectos e também a ajudar-se mutuamente. Este estudo mostra que através da utilização da tecnologia Realidade Aumentada, estas crianças são capazes de colaborar de uma forma espontânea suportada pela motivação, envolvimento e curiosidade. Descreve-se o design e a avaliação de um jogo de Realidade Aumentada, que consiste num sistema educativo para o ensino de crianças do pré-escolar. Este jogo permite que as crianças explorem conceitos tais como os animais e os meios onde vivem através de marcadores de Realidade Aumentada e de um tabuleiro de madeira. Estes marcadores consistem nas peças do jogo e através deles, as crianças podem manipular objectos virtuais em 3D. Foram realizados testes com diversas turmas de crianças em diferentes ambientes de aprendizagem, nomeadamente em escolas e num museu. Os resultados sugerem que o jogo é eficaz para obter níveis altos de concentração, motivação e colaboração entre as crianças, particularmente quando o feedback do jogo é fornecido de forma imediata. Os resultados mostram também que o jogo tem um impacto positivo sobre a experiência de aprendizagem das crianças.

Projeto de um protótipo de um veículo elétrico

Os veículos movidos com combustíveis fósseis são, hoje em dia, os veículos mais utilizados em transportes. Estes meios de transporte caracterizam-se pelo seu baixo rendimento e por serem poluentes, pelo que, nos últimos anos, tem havido um esforço em criar ou melhorar meios de transporte, através do aumento do seu rendimento e eliminando a emissão de poluentes. A utilização de máquinas elétricas como meio de locomoção é uma das soluções alternativas, uma vez que, estas apresentam um rendimento elevado e não emitem diretamente gases tóxicos, apesar das baterias serem uma das principais dificuldades, no que diz respeito à relação peso/densidade de energia. Por outro lado, as baterias, devido à sua capacidade de armazenamento de energia, podem ser utilizadas para armazenar energia da rede elétrica, contribuindo para uma melhor gestão, e também para armazenar num veículo elétrico a energia gerada em modo de travagem e que posteriormente pode ser utilizada para fazer mover o motor elétrico. Neste trabalho fez-se um projeto de um veículo elétrico (VE) e estudou-se o impacto da utilização em massa de veículos elétricos na gestão da rede de energia elétrica. A verificação experimental fez-se com um conversor DC/DC bidirecional com uma configuração em ponte H e com um conversor DC/DC redutor unidirecional. Utilizaram-se compensadores clássicos para, em malha fechada, regular o binário, a velocidade e a corrente, através de compensadores Proporcional Integrativo (PI) e Proporcional Integrativo Derivativo (PID). No desenvolvimento deste projeto, fez-se uma análise teórica, realizaram-se simulações na ferramenta MATLAB/Simulink onde foram criados modelos do veículo elétrico para verificar o seu comportamento, e seguidamente analisaram-se experimentalmente estes resultados. O controlo deste veículo foi feito com a utilização de microcontroladores de baixo custo, recorrendo a uma arquitetura de processamento distribuído/partilhado, constituindo esse estudo uma nova contribuição. Os resultados demonstraram que o rendimento dos veículos elétricos em média encontram-se nos 85-90 %, superior aos atuais 40% dos veículos a combustão interna, eliminando também a emissão de poluentes.

Relatório de estágio apresentado à Universidade da Madeira tendo em vista a obtenção do grau de mestre em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico

O presente Relatório de Estágio foi realizado no âmbito da Unidade Curricular de Relatório da Prática Pedagógica, do 2.º ano do Mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico da Universidade da Madeira. Neste trabalho apresentou-se a intervenção pedagógica desenvolvida na Escola Básica do 1.º Ciclo com Pré-Escolar da Ladeira, numa sala de Educação Pré-Escolar, com crianças com idades compreendidas entre os 4 e 5 anos. Primeiro expôs-se a contextualização teórica que fundamentou a prática, procurando revelar os pressupostos teóricos mais importantes para a ação, tais como a identidade do Educador e principais teorias de Piaget e Vygotsky. Os Modelos Pedagógicos High/Scope, Movimento da Escola Moderna e as estratégias: aprendizagem cooperativa e diferenciação pedagógica também foram elementos indispensáveis para a ação. Recorrendo à observação participante, à análise documental do Projeto Curricular de Grupo e a diálogos com as crianças e a Educadora Cooperante, descobriu-se que o grupo apresentava problemas de comunicação oral. Com a investigação-ação ambicionou-se descobrir meios e atividades que pudessem auxiliar as crianças a comunicar oralmente. Para isto, foi necessário colocar em prática diversas atividades a fim de descobrir quais seriam as mais eficazes, tendo em vista colmatar as dificuldades sentidas. Consequentemente estimulou-se o diálogo, recorreu-se à Expressão Dramática, motivação, reforço positivo, histórias e recontos. Com isto constatou-se que a motivação, reforço positivo, histórias, recontos, diálogos em pequeno e grande grupo, levaram efetivamente as crianças comunicar oralmente de forma voluntária e mais espontânea. Por último, apresentou-se o desenvolvimento do Estágio, onde foi exposta a intervenção com o grupo e comunidade educativa, assim como os instrumentos de avaliação adotados para a verificação da aquisição das aprendizagens.

Determinantes da Estrutura de Capital de Companhias Abertas Brasileiras Não-Financeiras: Um Estudo Empírico com Dados em Painel

When a company desires to invest in a project, it must obtain resources needed to make the investment. The alternatives are using firm s internal resources or obtain external resources through contracts of debt and issuance of shares. Decisions involving the composition of internal resources, debt and shares in the total resources used to finance the activities of a company related to the choice of its capital structure. Although there are studies in the area of finance on the debt determinants of firms, the issue of capital structure is still controversial. This work sought to identify the predominant factors that determine the capital structure of Brazilian share capital, non-financial firms. This work was used a quantitative approach, with application of the statistical technique of multiple linear regression on data in panel. Estimates were made by the method of ordinary least squares with model of fixed effects. About 116 companies were selected to participate in this research. The period considered is from 2003 to 2007. The variables and hypotheses tested in this study were built based on theories of capital structure and in empirical researches. Results indicate that the variables, such as risk, size, and composition of assets and firms growth influence their indebtedness. The profitability variable was not relevant to the composition of indebtedness of the companies analyzed. However, analyzing only the long-term debt, comes to the conclusion that the relevant variables are the size of firms and, especially, the composition of its assets (tangibility).This sense, the smaller the size of the undertaking or the greater the representation of fixed assets in total assets, the greater its propensity to long-term debt. Furthermore, this research could not identify a predominant theory to explain the capital structure of Brazilian

Percepção Ambiental em Museus Paisagens de Arte Contemporânea: a legibilidade dos museus Inhotim/Brasil e em Serralves/Portugal avaliada pelo público/visitante

This thesis nalyzes the wayfinding in Landscape Museum of Contemporary Art (MPAC), based on the Institute of Contemporary Art CACI, Minas Gerais, Brazil and the Museum of Contemporary Art of the Serralves Foundation, Porto, Portugal. The study focuses on the interrelationship of the public/visitors with the landscape, architecture and contemporary art museums in these, in order to understand visual perception and apprehension of such an environment for their users. For both were confronted documentation (visual and written) and people talk. The main hypothesis put forward is that the audience/visitor MPAC appreciates the interrelationship between the natural environment (park/garden) and built environment (the works of contemporary art and the galleries), giving equal value to both. To complement this, a second hypothesis is that during the visit to MPACS, visitors define their paths spontaneously, but strongly influenced by existing visual indicators (maps, signage and striking landscape elements), which facilitate the readability of space, which also contribute to the offered services and the experiences of similar institutions. The analytical basis of the research used the concepts of legibility (LYNCH, 2009), wayfinding (GIBSON, 2009; ARTHUR, PASSINI, 2002; WEISMAN, 1982), Experiential Cotinnum (TUAN, 1985), Space Bound (CRUZ PINTO, 2007) and habitus (BOURDIEU, 1992). Methodologically was used qualitative research (DEMO 2000) by means of a case study (YIN, 2005; STAKE, 1999) and participant observation (WHYTE, 2005). In the two institutions interviews with researchers and curators, behavior observation and questionnaires from employees, trainees, monitors and the public/visitor of the two museums were performed. Although partially referende the initial hypothesis, the research showed that the public/visitor value appears more natural environments, they experience a greater intensity and in addition to the factors listed in the second case, your perception and definition of paths suffer significant influence of emotional relations established with space. Generally the audience/visitor adapts easily to different demands of contemporary art exhibition in the two museums and the built environment (park/garden and museum) interferes with your reading path during the visit, perceived by the public/visitor condition as a factor that favors the enjoyment of works on different mounts (wayfinding), though often become a factor that hinders the legibility of the building and its built environment

Descrição do ciclo gametogênico do ouriço-branco, Tripneustes ventricosus (Lamarck, 1816), no Arquipélago de Fernando de Noronha PE, Brasil

Sea urchins are common benthic organisms on coastal ecosystems of tropical and temperate shallow waters. The impact of sea urchins populations in shore communities is density-dependent, and therefore, knowledge of the life history of these animals is important to understand these interactions. Between 2000 and 2005 a population boom of Tripneustes ventricosus was observed in the Fernando de Noronha Archipelago. In 2004 a research program was started to monitor the population dynamics of T. ventricosus in the archipelago, when it noted a lack of basic information on the biology and reproduction of this species, despite its broad geographic distribution and economic importance in parts of its occurrence. In this context, this work focuses on the reproductive biology of T. ventricosus with emphasis on the description of the gametogenic stages. Between December 2006 and July 2007, ten urchins were collected by snorkeling in two sites of the archipelago, totaling 120 individuals. Gametogenic stages were described for both sexes through microscopic analysis, and were defined as: Recovery, Growing, Premature, Mature and Spawning. Results showed increasing in Gonad index throughout of months of sampling and suggest that the reproductive cycle of the species in the archipelago is annual

Influência do vírus da hepatite G (GBV-C) na resposta imune frente à infecção por Leishmania chagasi

GB virus type C (GBV-C) appears to promote a Th1 response and is associated with prolonged survival in HIV-infected people. L. chagasi causes a spectrum of illness that varies from severe visceral leishmaniasis, a disease that in the majority of cases is fatal if not treated, to self resolution of infection and development of positive DTH response that is protective against symptomatic disease. To determine if GBV-C viremia might influence the outcome of Leishmania infection, we characterized GBV-C status in a cohort of subjects residing in a L. chagasi endemic area in Brazil. GBV-C viremia was more prevalent in blood donors from urban than in periurban regions of Natal, Brazil (16% and 7.5% respectively). Evidence of prior GBV-C (anti-E2 antibodies) was detected in 24% and 12%of these groups respectively. Anti-E2 increased with age (p= 0.0121). No difference in GBV-C viremia was found in the DTH+ and VL groups (p= 0.269); however, subjects with visceral leishmaniasis were more likely to have anti-E2 than DTH+ subjects (p=0.0012), and DTH induration was smaller in subjects with E2 antibodies (4.5 mm) compared those without (7.12 mm) (p= 0.002). Furthermore, the size of the Leishmania DTH response was greater in GBV-C viremica subjects (6.8 mm) compared to non-viremic subjects (3.3 mm; p= 0.0054). There findings suggest that GBV-C virus may promote a type 1 immune response that could influence the outcome of Leishmania infection

Utilização da Berberina na Identificação dos Mastócitos do Molusco Anomalocardia brasiliana

Berberine is an alkaloid used as a fluorochrome in the identification of heparin and DNA. Enerback, 1974, described the technique used until today to study granules rich in heparin of vertebrate mast cells. Santos et al., 2003, studied mast cells of the mollusk Anomalocardia brasiliana using biochemical and histological analysis. This work used the fluorescent dye berberine technique to improve characterization of these cells. Mollusk organs (ctenidium and mantle) were processed with routine histological techniques. Tissue sections were treated with berberine 0,02% in redistilled water acidified to pH 4, by the addition of citric acid for 20 minutes. The visualization was made through fluorescence microscopy with ultraviolet region emission. The mast cell fluorescence had a strong yellow color, where cell nuclei appeared more greenish. This result was very similar to the ones reported before. Mast cells are location at the epithelium surface is the same in both organs, mantle and ctenidium. The fluorescence was easily observed in the granules. Therefore, this technique showed to be good and sensitive to study mast cell of invertebrates

Modificação de membranas de quitosana por plasma para uso biológico

Chitosan membranes have been modified by plasma, utilizing the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen. The modified membranes by plasma were compared to the unmodified ones. The membranes were characterized by absorption assay, contact angle, atomic force microscopy (AFM). Also, permeability assay of sodium sulfamerazine from such membranes were carried out. Through the absorption assay and contact angle it was possible to obtain information of the wettability of the membranes and what changes the plasma treatment can promote in relation to it. The plasma treatment using oxygen promoted increase of the wetability and swelling while the samples treated with methane decrease of the wetability and swelling. Through the Optical Emission Spectroscopy (OES) it was possible to identify which species were present in the plasma during the treatment. And through the AFM analysis it was possible to observe the changes nanotopography occurred on the surface of the samples. Permeability assay were archived for all treated membranes and compared to no treated ones. Due to that assay it was possible verify which the plasma treatment increased the permeability spectrum of the membranes which has varied from 1,4548 *10-5cm2.min-1 to 2,7713*10-5cm2.min-1. Chitosan membranes with permeability varied are importance in systems drug delivery, to liberate a wide variety of drugs

Tratamento termoquímico do titânio auxiliado por plasma de ar - N2 - O2

Discs were grade II cp Ti oxynitride by plasma of Ar - N2 - O2 using different proportions of individual gases. These ratios were established from analysis of optical emission spectroscopy (OES) of plasma species. The proportions that resulted in species whose spectra showed an abrupt change of light intensity were chosen for this study. Nanohardness tests revealed that there was a correlation between the intensity of N2 + species with the hardness, because the treatments where they had a higher intensity, obtained a higher value nanohardness, although the crystalline phases have remained unchanged. With respect to topography, it was observed that in general, the surface roughness is related to the intensities of plasma species, because they may have different values depending on the behavior of the species. Images obtained by optical microscopy revealed a surface with grains of different colors to optical reflectance showed a peak of reflection in the red area. Measures the contact angle and surface tension showed hydrophilic properties and hydrophilic with little variation of polar and dispersive components of surface tension

Influência das espécies ativas na absorção de intersticiais durante a carbonitretação a plasma do TI

Physical-chemical properties of Ti are sensible to the presence of interstitial elements. In the case of thermochemical treatments plasma assisted, the influence of different active species is not still understood. In order to contribute for such knowledge, this work purposes a study of the role played by the active species atmosphere into the Ar N2 CH4 carbonitriding plasma. It was carried out a plasma diagnostic by OES (Optical Emission Spectroscopy) in the z Ar y N2 x CH4 plasma mixture, in which z, y and x indexes represent gas flow variable from 0 to 4 sccm (cm3/min). The diagnostic presents abrupt variations of emission intensities associated to the species in determined conditions. Therefore, they were selected in order to carry out the chemical treatment and then to investigate their influences. Commercial pure Ti disks were submitted to plasma carbonitriding process using pre-established conditions from the OES measurements while some parameters such as pressure and temperature were maintained constant. The concentration profiles of interstitial elements (C and N atoms) were determined by Resonant Nuclear Reaction Analysis (NRA) resulting in a depth profile plots. The reactions used were 15N(ρ,αγ)12C and 12C(α,α)12C. GIXRD (Grazing Incidence X-Ray Diffraction) analysis was used in order to identify the presence of phases on the surface. Micro-Raman spectroscopy was used in order to qualitatively study the carbon into the TiCxN1 structure. It has been verified which the density species effectively influences more the diffusion of particles into the Ti lattice and characteristics of the layer formed than the gas concentration. High intensity of N2 + (391,4 nm) and CH (387,1 nm) species promotes more diffusion of C and N. It was observed that Hα (656,3 nm) species acts like a catalyzer allowing a deeper diffusion of nitrogen and carbon into the titanium lattice.

Síntese e caracterização de óxidos de cério e cobalto obtidos por gel-combustão e Pechini aplicados às reações de oxidação de n-hexano

Oxide type spinel AB2O4 presents structure adjusted for application in the automobile industry. The spinel of cobalt has many practical applications had its excellent physical and chemical properties such as catalyst in hydrocarbon oxidation reaction. The CeO2 has been used in many of these processes because it assigns to a material with excellent thermal resistance and mechanics, high capacity of oxygen stockage (OSC) among others properties. This work deals with the synthesis, characterization and catalytic application of spinel of cobalt and CeO2 with fluorita structure, obtained for method of Pechini and method of Gel-Combustion. The process of Pechini, the puff was obtained at 300 ºC for 2 h in air. In the process of Gel-Combustion the approximately at 350 ºC material was prepared and burnt for Pyrolysis, both had been calcined at 500 ºC, 700 ºC, 900 ºC and 1050 ºC for 2 h in air. The materials of the calcinations had been characterized by TG/DTA, electronic microscopy of sweepings (MEV), spectroscopy of absorption in the infra-red ray (FTIR) and diffraction of X-rays (DRX). The obtained material reaches the phase oxide at 450 oC for Pechini method and 500 °C for combustion method. The samples were submitted catalytic reaction of n-hexane on superficies of materials. The reactor function in molar ration of 0, 85 mol.h-1.g-1 and temperature of system was 450 °C. The sample obtained for Pechini and support in alumine of superficial area of 178,63 m2.g-1 calcined at 700 ºC, give results of catalytic conversions of 39 % and the sample obtained for method of gel-combustion and support in alumina of 150 mesh calcined at 500 ºC result 13 % of conversion. Both method were selective specie C1

Influência dos parâmetros de processo na deposição de nitreto de titânio por plasma em gaiola catódica

Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples