Impact of seafarming: fish farms vs. mussel farms

The article presents comparative impacts of fish and mussel seafarms. Specifically, it tackles the impacts of the two farms on the following: solid waste production, water flow and sedimentation, effect on native bottom fauna, effect on wild fish populations, the spread of toxic chemicals and drugs, and multi-use conflicts.

Safety implications of reactivity variations in fast thorium ADSRs

Nuclear power generation offers a reliable, low-impact and large-scale alternative to fossil fuels. However, concerns exist over the safety and sustainability of this method of power production, and it remains unpopular with some governments and pressure groups throughout the world. Fast thorium fuelled accelerator-driven sub-critical reactors (ADSRs) offer a possible route to providing further re-assurance regarding these concerns on account of their properties of enhanced safety through sub-critical operation combined with reduced actinide waste production from the thorium fuel source. The appropriate sub-critical margin at which these reactors should operate is the subject of continued debate. Commercial interests favour a small sub-critical margin in order to minimise the size of the accelerator needed for a given power output, whilst enhanced safety would be better satisfied through larger sub-critical margins to further minimise the possibility of a criticality excursion. Against this background, this paper examines some of the issues affecting reactor safety inherent within thorium fuel sources resulting from the essential Th90232→Th90233→Pa91233→U92233 breeding chain. Differences in the decay half-lives and fission and capture cross-sections of 233Pa and 233U can result in significant changes in the reactivity of the fuel following changes in the reactor power. Reactor operation is represented using a homogeneous lumped fast reactor model that can simulate the evolution of actinides and reactivity variations to first-order accuracy. The reactivity of the fuel is shown to increase significantly following a loss of power to the accelerator. Where the sub-critical operating margins are small this can result in a criticality excursion unless some form of additional intervention is made, for example through the insertion of control rods. © 2012 Elsevier Ltd. All rights reserved.

Experimental study on an SFCL using series-connected YBCO thin films

Superconducting Fault Current Limiters (SFCLs) are able to reduce fault currents to an acceptable value, reducing potential mechanical and thermal damage and allowing more flexibility in an electric power system's design. Due to limitations in current YBCO thin film manufacturing techniques, it is necessary to connect a number of thin films in different series and parallel configurations in order to realise a practical SFCL for electric power system applications. The amount of resistance generated (i.e. the degree of current limitation), the characteristics of the S-N transition, and the time at which they operate is different depending on their comparative characteristics. However, it is desirable for series-connected thin films to have an operating time difference as small as possible to avoid placing an excess burden on certain thin films. The role of a parallel resistance, along with the influence of thin film characteristics, such as critical current (Ic), are discussed in regards to the design of SFCLs using YBCO thin films. © 2008 IOP Publishing Ltd.

Heterogeneous reconfigurable system for adaptive particle filters in real-time applications

This paper presents a heterogeneous reconfigurable system for real-time applications applying particle filters. The system consists of an FPGA and a multi-threaded CPU. We propose a method to adapt the number of particles dynamically and utilise the run-time reconfigurability of the FPGA for reduced power and energy consumption. An application is developed which involves simultaneous mobile robot localisation and people tracking. It shows that the proposed adaptive particle filter can reduce up to 99% of computation time. Using run-time reconfiguration, we achieve 34% reduction in idle power and save 26-34% of system energy. Our proposed system is up to 7.39 times faster and 3.65 times more energy efficient than the Intel Xeon X5650 CPU with 12 threads, and 1.3 times faster and 2.13 times more energy efficient than an NVIDIA Tesla C2070 GPU. © 2013 Springer-Verlag.

Dynamic modelling of the brushless doubly fed machine

A coupled-circuit model for the brushless doubly fed machine (BDFM) has been developed. The transformation of the model into the d-q axis form, ultimately in a synchronous reference frame in which machine currents and voltages have constant values in the steady state, has been carried out. A model-reduction technique is presented, which gives a concise representation of the 'nested-loop' rotor design using a single d-q pair. These models have been experimentally verified and give a convenient and accurate way of calculating the dynamic behaviour of a BDFM. The ability to represent the BDFM with a single d-q pair considerably simplifies the design of suitable controllers. © The Institution of Engineering and Technology 2013.

Low voltage ride-through of DFIG and brushless DFIG: Similarities and differences

The brushless doubly fed induction generator (BDFIG) has been proposed as a viable alternative in wind turbines to the commonly used doubly fed induction generator (DFIG). The BDFIG retains the benefits of the DFIG, i.e. variable speed operation with a partially rated converter, but without the use of brush gear and slip rings, thereby conferring enhanced reliability. As low voltage ride-through (LVRT) performance of the DFIG-based wind turbine is well understood, this paper aims to analyze LVRT behavior of the BDFIG-based wind turbine in a similar way. In order to achieve this goal, the equivalence between their two-axis model parameters is investigated. The variation of flux linkages, back-EMFs and currents of both types of generator are elaborated during three phase voltage dips. Moreover, the structural differences between the two generators, which lead to different equivalent parameters and hence different LVRT capabilities, are investigated. The analytical results are verified via time-domain simulations for medium size wind turbine generators as well as experimental results of a voltage dip on a prototype 250 kVA BDFIG. © 2014 Elsevier B.V.

Noise and vibration in brushless doubly fed machine and brushless doubly fed reluctance machine

This study investigates modes of vibration in brushless doubly fed machine and brushless doubly fed reluctance machine due to the interaction of its fundamental magnetic fields, via the bending forces they set up in the back iron. It is shown that the presence of two field components of different pole numbers leads to vibration components in addition to those that would be expected in single field machines such as the induction motor. Formulations for the frequencies and magnitudes of the expected vibration components are given and verified experimentally. It is shown that the strength of the vibration components is highly dependent on the choice of pole numbers in the machine, with some much worse than equivalent induction machines and some very similar. The methodology presented enables designers to determine whether their machines are likely to suffer from vibration problems in advance of construction, and to apply remedies where appropriate. © The Institution of Engineering and Technology 2014.

Inhibition of progesterone receptor activity in recombinant yeast by soot from fossil fuel combustion emissions and air particulate materials

Numerous environmental pollutants have been detected for estrogenic activity by interacting with the estrogen receptor, but little information is available about their interactions with the progesterone receptor. In this study, emission samples generated by fossil fuel combustion (FFC) and air particulate material (APM) collected from an urban location near a traffic line in a big city of China were evaluated to interact with the human progesterone receptor (hPR) signaling pathway by examining their ability to interact with the activity of hPR expressed in yeast. The results showed that the soot of a petroleum-fired vehicle possessed the most potent anti-progesteronic activity, that of coal-fired stove and diesel fired agrimotor emissions took the second place, and soot samples of coal-fired heating work and electric power station had lesser progesterone inhibition activity. The anti-progesteronic activity of APM was between that of soot from petroleum-fired vehicle and soot from coal-fired establishments and diesel fired agrimotor. Since there was no other large pollution source near the APM sampling sites, the endocrine disrupters were most likely from vehicle emissions, tire attrition and house heating sources. The correlation analysis showed that a strong relationship existed between estrogenic activity and anti-progesteronic activity in emissions of fossil fuel combustion. The discoveries that some environmental pollutants with estrogenic activity can also inhibit OR activity indicate that further studies are required to investigate potential mechanisms for the reported estrogenic activities of these pollutants. (c) 2005 Elsevier B.V. All rights reserved.

Presence of estrogenic activity from emission of fossil fuel combustion as detected by a recombinant yeast bioassay

Estrogenic activities of emission samples generated by fossil fuel combustion were investigated with human estrogen receptor (ER) recombinant yeast bioassay. The results showed that there were weak but clear estrogenic activities in combustion emissions of fossil fuels including coal, petroleum, and diesel. The estrogenic relative potency (RP) of fossil fuel combustion was the highest in petroleum-fired car, followed by coal-fired stove, diesel-fired agrimotor, coal-fired electric power station. On the other hand, the estrogenic relative inductive efficiency (RIE) was the highest in coal-fired stove and coal-fired electric power station, followed by petroleum-fired car and diesel-fired agrimotor. The estrogenic activities in the sub-fractions from chromatographic separation of emitted materials were also determined. The results indicated that different chemical fractions in these complex systems have different estrogenic potencies. The GC/MS analysis of the emission showed that there were many aromatic carbonyls, big molecular alcohol, PAHs and derivatives, and substituted phenolic compounds and derivatives which have been reported as environmental estrogens. The existence of estrogenic substances in fossil fuel combustion demands further investigation of their potential adverse effects on human and on the ecosystem. The magnitude of pollution due to global usage of fossil fuels makes it imperative to understand the issue of fossil fuel-derived endocrine activities and the associated health risks, particularly the aggregated risks stemmed from exposure to toxicants of multiple sources. (C) 2003 Elsevier Science Ltd. All rights reserved.

补充灌溉及氮磷配施对黄土塬区冬小麦水分利用及产量的影响

采用裂区试验设计,对黄土塬区补充灌溉及氮磷配施条件下麦田土壤水分动态、作物产量及水分利用效率等进行研究。结果表明:1)冬小麦对土壤水分的利用深度随小麦生长发育逐渐加深,在越冬前期和孕穗期分别达1.2和2.2 m土层以下,不同处理土壤含水量在小麦生育前期差异不明显,孕穗后氮磷配施处理的土壤含水量显著低于不施肥处理;2)试验条件下,补充灌溉后同样施肥处理的作物产量与雨养相比,虽有增加但不显著;不论是雨养水平,还是补充灌溉水平,氮磷配施均表现出显著的增产效果,从低氮低磷到高氮高磷,增产幅度在134%到240%之间;3)氮磷配施能显著提高冬小麦水分利用效率,而补充灌溉后水分利用效率降低3%~30%,但未达显著水平;4)不同氮磷配施的增产效应高于补充灌溉,补充灌溉与高氮高磷处理有显著的水肥协同效应,能显著提高作物产量并保持较高的水分利用效率。

定位施肥对冬小麦生长、产量及水分利用的影响

基于长期定位施肥试验,研究了不同施肥对冬小麦生长、产量及水分利用的影响。结果表明:不同施肥均能促进冬小麦株高、叶面积、生物量的增长,株高、叶面积、生物量均为:单施氮肥处理(N)高于不施肥处理(CK),氮磷配施处理(NP)显著高于CK和N处理,三个有机肥处理(M、NM和NPM)均较高。不同施肥对冬小麦光合速率影响显著,NPM处理的光合速率在各个生育期均最高;其次分别为NM处理和NP处理,而M处理在前期较高,后期下降较快,N和CK处理均较低。不同施肥处理小麦产量:NPM>NM>M>NP>N>CK,不同施肥均能显著增加小麦产量(增产量为341～4388kg/hm2),除M和NM处理,其他处理均有显著差异;冬小麦耗水量和水分利用效率均随施肥水平提高而增加,NPM和NP处理显著高于N和CK处理。表明在本试验年单施氮肥对小麦生长及产量影响较小,单施有机肥及不同肥料配施均能显著促进小麦生长及产量提高,有机肥的增产效应显著高于无机肥,其中NPM处理的产量及水分利用效率均最高。

现代雨水利用技术研究进展与研发重点

具有工程化、科技化、规模化内涵的现代雨水利用技术是现代节水农业技术的重要研究内容,已成为缓解干旱缺水,实现农业高效用水,降低常规农业用水量的有效措施。在分析现代雨水利用技术研究进展及其发展趋势基础上,指出现代雨水利用技术是传统雨水利用技术与新材料技术、现代生物技术、现代信息技术、现代灌溉工程技术等高新技术相结合的产物,具有多学科相互交叉、各单项技术相互渗透的明显特征。在此基础上,提出了近中期现代雨水利用技术研发的重点,即以重大前沿性技术研究为基础,研发与雨水利用相关的重要关键技术与产品,探索建立适宜的现代雨水高效利用技术体系。

无压灌溉日光温室番茄作物-皿系数研究

以-25 kPa作为土壤水势临界值,将作物—皿系数(Kcp)设为0.2,0.4,0.6,0.8,1.0,1.2六个处理,研究了不同灌溉水量时的番茄产量、品质和灌溉水利用效率。通过经济效益评价,研究了杨凌地区无压灌溉温室番茄获得最高经济效益时的作物—皿系数。通过张力计读数变化规律,研究了利用张力计测量无压灌溉湿润体内土壤水势的特点。研究结果表明,Kcp为0.2~0.8时,灌溉水量的增加对番茄产量影响不大;Kcp为1.0~1.2时,灌溉水量的增加能显著提高番茄产量和果实大小;Kcp为0.2时的灌溉水量能极显著提高番茄的灌溉水利用效率。在综合考虑了杨凌地区水价、番茄使用目的和市场价格波动规律后,Kcp取值1.2能获得最高的经济效益。作物—皿系数法计算灌溉水量时的滞后性特点和张力计埋设位置,是判断利用张力计监测土壤水势临界值方法有效性的两个重要因素。

论高粱的抗旱性及在旱区农业中的地位

本文以笔者研究组多年研究结果为基础,以玉米为主要参比作物,就干旱逆境下高粱的产量表现、水分利用及抗旱特性进行了论述。认为高粱是一种综合抗旱能力很强的作物,尤其具有低耗水、高水分利用效率特性,其耐旱性显著高于玉米,也高于谷子和苜蓿,属于一种典型的模式抗旱作物,具有重要的生产和研究价值。指出高粱作为抗逆性很强的粮饲酿兼用作物,特别是作为一种能源植物,仍具良好的发展前景。建议今后在降水量低于450mm、热量可满足生长的地区扩大高粱种植面积,同时加强对其整体抗旱性机理及抗旱基因组的研究。