Evolution of the mating system in colonizing plants.

Colonization is likely to be more successful for species with an ability to self-fertilize and thus to establish new populations as single individuals. As a result, self-compatibility should be common among colonizing species. This idea, labelled 'Baker's law', has been influential in discussions of sexual-system and mating-system evolution. However, its generality has been questioned, because models of the evolution of dispersal and the mating system predict an association between high dispersal rates and outcrossing rather than selfing, and because of many apparent counter examples to the law. The contrasting predictions made by models invoking Baker's law versus those for the evolution of the mating system and dispersal urges a reassessment of how we should view both these traits. Here, I review the literature on the evolution of mating and dispersal in colonizing species, with a focus on conceptual issues. I argue for the importance of distinguishing between the selfing or outcrossing rate and a simple ability to self-fertilize, as well as for the need for a more nuanced consideration of dispersal. Colonizing species will be characterized by different phases in their life pattern: dispersal to new habitat, implying an ecological sieve on dispersal traits; establishment and a phase of growth following colonization, implying a sieve on reproductive traits; and a phase of demographic stasis at high density, during which new trait associations can evolve through local adaptation. This dynamic means that the sorting of mating-system and dispersal traits should change over time, making simple predictions difficult.

Diagnosis by imaging : the case of textbooks of diseases of the nervous system (1850-1920)

Les traités scientifiques ne font que depuis peu d'années l'objet d'études en histoire des sciences. Pourtant, ces traités ont énormément à apporter car ils renseignent sur la manière de raisonner des auteurs, ainsi que sur le développement d'une discipline. Dans ce travail de doctorat, différents traités des maladies du système nerveux ont été dépouillés, notamment le traité de Sémiologie des affections du système nerveux (1914) de Jules Dejerine (1849-1917). Ce traité a été analysé de trois manières différentes. Il a tout d'abord été comparé à une édition précédente publiée sous forme de chapitre (1901), révélant un large remodelage du contenu du traité, suggérant une évolution rapide de la discipline neurologique en l'espace de quelques années. Deuxièmement, l'analyse de la Sémiologie a permis de recréer un réseau de professionnels avec qui Jules Dejerine était en contact et, en parcourant les livres publiés par ces auteurs, il a été possible de décrire de quelle manière ces auteurs se citent mutuellement. Finalement, ces livres contiennent de nombreuses illustrations, qui sont associées à la notion de « preuve » : les auteurs utilisent des images sous forme de dessins, de photographies ou de schémas qui illustrent des patients ou des pièces anatomiques pour « montrer » la maladie ou la lésion. Chaque illustration a un rôle à jouer pour décrire la lésion, montrer la progression de la maladie et elle aide le médecin à poser le diagnostic. Grâce à ces trois axes de recherche, un traité devient un outil de travail dynamique, qui évolue au fil des rééditions, influencé par les critiques et commentaires retrouvés dans d'autres traités et articles, et par les progrès accomplis dans la discipline traitée. Des, passages et certaines images de l'ouvrage circulent également de traité en traité et véhiculent l'autorité de l'auteur de ces passages et images qui en viennent à représenter la maladie. Ce transfert d'images joue également un rôle dans la standardisation du diagnostic et dans l'unification de la neurologie à travers le monde occidental au début du XXe siècle, une période charnière pour l'histoire de la médecine. -- Au début du XXe siècle, la neurologie est une jeune spécialité médicale qui se développe rapidement. Les différents médecins publient des traités, communiquent entre eux et échangent leurs données. Un traité scientifique est un outil de travail dynamique qui évolue avec les rééditions et le développement d'une discipline. Ces ouvrages recèlent toutes sortes d'informations et leur analyse ne fait que depuis peu de temps l'objet d'études en histoire des sciences. Ces traités regorgent notamment d'illustrations qui sont associées à la notion de « preuve » : les auteurs utilisent des images sous forme de dessins, de photographies ou de schémas qui représentent des patients ou des pièces anatomiques afin de « montrer » la maladie ou la lésion. Chaque illustration a un rôle à jouer pour décrire la pathologie, montrer la progression de la maladie et elle aide le médecin à poser le diagnostic. Les auteurs des traités, qui viennent d'Europe et d'Amérique du Nord, se citent mutuellement, permettant au lecteur de recréer leur réseau de professionnels au niveau international. De plus, comme ces auteurs réutilisent les observations et les illustrations des autres, celles-ci circulent de traité en traité et en viennent à représenter la maladie. Ce transfert d'images joue également un rôle dans la standardisation du diagnostic et dans l'unification de la neurologie à travers le monde occidental au début du XXe siècle, une période charnière pour l'histoire de la médecine. -- Until recently, the study of textbooks has been neglected in the history of the sciences. However, textbooks can provide fruitful sources of information regarding the way authors work and the development of a particular discipline. This dissertation reviews editions of a single textbook, the Sémiologie des affections du système nerveux (1914) by Jules Dejerine (1849-1917). This textbook enabled the description of three axes of research. Firstly, by comparing the book to a first edition published as a chapter, one can acknowledge an extensive remodeling of the content of the book, suggesting a vast increase in knowledge over time. Secondly, by looking at the authors that Dejerine quotes repeatedly, it becomes possible to recreate his professional network, to review the works of these authors and to determine how they cross-reference each other. Thirdly, these textbooks contain numerous medical illustrations, which are linked with the concept of "proof;" the authors demonstrate a willingness to "show" the lesion or the pathology by publishing an image. Drawings, schematic representations, radiographies, or photographs of patients or of anatomical preparations all have their own purpose in describing the lesion and the progression of the disease. They assist in the diagnosis of the pathology. By looking at all of these aspects, it is therefore possible to conclude that a neurological textbook is a dynamic object that evolves through re-editions, comments and references found in other textbooks and by the circulations of parts of these books, such as the images. The illustrations also carry the author's authority, since their ongoing use claims that the work by the owner of the image has been endorsed by others. At the same time, it validates the borrowers' arguments. By using medical illustrations from different authors worldwide, the authors are also making a claim to a common language, to a similar way of examining patients, and about how much they depend on medical imagery to prove their points. In that sense, by focusing upon these textbooks, one can affirm that neurology already existed as a worldwide specialty at the turn of the twentieth century. Much more than mere accompaniments to the text, images were of paramount importance to the unification of neurology.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

Positioning Wireless Mobile Terminal Devices

Positioning techniques enable the positioning of mobile transportation vehicles. Location information can be used in transport planning as well as in vehicles. Information can also be transferred between vehicles and transport planning. For example, pickup and delivery information and route instructions can be exchanged wirelessly. In this thesis, techniques suitable for positioning vehicles are studied, as well as techniques enabling wireless connectivity of the vehicles to the transport planning system. A prototype based on one positioning and connectivity technique is implemented. As a result, a system capable of positioning vehicles is created. The vehicles can be located almost in real-time. The accuracy in positioning is sufficient to visualise the locations on a good quality 1:20000 city map.

Bluetooth wireless technology based guidance system

Lyhyen kantaman langattomat kommunikaatioteknologiat tarjoavat mahdollisuuden toteuttaa erilaisia paikkasidonnaisia palveluita käyttäjille kohtuullisilla kustannuksilla. Opastejärjestelmä, joka ohjaa käyttäjän paikasta toiseen, on yksi tälläinen palvelu. Tässä työssä esitetään langattomaan Bluetooth teknologiaan perustuva opastejärjestelmä. Muita langattomia teknologioita verrataan Bluetoothiin opastejärjestelmän toteuttamisen kannalta. Erilaisia järjestelmän arkkitehtuuri vaihtoehtoja käyttäjän paikantamiseen esitellään. Paikkatietoja hyödynnetään opasteviestin muodostamisessa. Tapoja muodostaa käyttäjän reitti kahden paikan välillä toimistorakennuksessa esitetään. Työn tulos on halpa langatonta Bluetooth teknologiaa hyödyntävä opastejärjestelmä, jota voidaan käyttää myös muiden langattomien paikkasidonnaisten palveluiden tuottamiseen.

Dynamic single cell measurements of kinase activity by synthetic kinase activity relocation sensors.

BACKGROUND: Mitogen activated protein kinases (MAPK) play an essential role in integrating extra-cellular signals and intra-cellular cues to allow cells to grow, adapt to stresses, or undergo apoptosis. Budding yeast serves as a powerful system to understand the fundamental regulatory mechanisms that allow these pathways to combine multiple signals and deliver an appropriate response. To fully comprehend the variability and dynamics of these signaling cascades, dynamic and quantitative single cell measurements are required. Microscopy is an ideal technique to obtain these data; however, novel assays have to be developed to measure the activity of these cascades. RESULTS: We have generated fluorescent biosensors that allow the real-time measurement of kinase activity at the single cell level. Here, synthetic MAPK substrates were engineered to undergo nuclear-to-cytoplasmic relocation upon phosphorylation of a nuclear localization sequence. Combination of fluorescence microscopy and automated image analysis allows the quantification of the dynamics of kinase activity in hundreds of single cells. A large heterogeneity in the dynamics of MAPK activity between individual cells was measured. The variability in the mating pathway can be accounted for by differences in cell cycle stage, while, in the cell wall integrity pathway, the response to cell wall stress is independent of cell cycle stage. CONCLUSIONS: These synthetic kinase activity relocation sensors allow the quantification of kinase activity in live single cells. The modularity of the architecture of these reporters will allow their application in many other signaling cascades. These measurements will allow to uncover new dynamic behaviour that previously could not be observed in population level measurements.

Computer-aided system for morphometric mandibular index computation (Using dental panoramic radiographs)

Objective: We propose and validate a computer aided system to measure three different mandibular indexes: cortical width, panoramic mandibular index and, mandibular alveolar bone resorption index. Study Design: Repeatability and reproducibility of the measurements are analyzed and compared to the manual estimation of the same indexes. Results: The proposed computerized system exhibits superior repeatability and reproducibility rates compared to standard manual methods. Moreover, the time required to perform the measurements using the proposed method is negligible compared to perform the measurements manually. Conclusions: We have proposed a very user friendly computerized method to measure three different morphometric mandibular indexes. From the results we can conclude that the system provides a practical manner to perform these measurements. It does not require an expert examiner and does not take more than 16 seconds per analysis. Thus, it may be suitable to diagnose osteoporosis using dental panoramic radiographs

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.

Combining Advanced Forecasting Methods with System Dynamics - the Case of Finnish Seaports

Seaports play an important part in the wellbeing of a nation. Many nations are highly dependent on foreign trade and most trade is done using sea vessels. This study is part of a larger research project, where a simulation model is required in order to create further analyses on Finnish macro logistical networks. The objective of this study is to create a system dynamic simulation model, which gives an accurate forecast for the development of demand of Finnish seaports up to 2030. The emphasis on this study is to show how it is possible to create a detailed harbor demand System Dynamic model with the help of statistical methods. The used forecasting methods were ARIMA (autoregressive integrated moving average) and regression models. The created simulation model gives a forecast with confidence intervals and allows studying different scenarios. The building process was found to be a useful one and the built model can be expanded to be more detailed. Required capacity for other parts of the Finnish logistical system could easily be included in the model.

Design and evaluation of learning algorithms for dynamic resource management in virtual networks

Network virtualisation is considerably gaining attentionas a solution to ossification of the Internet. However, thesuccess of network virtualisation will depend in part on how efficientlythe virtual networks utilise substrate network resources.In this paper, we propose a machine learning-based approachto virtual network resource management. We propose to modelthe substrate network as a decentralised system and introducea learning algorithm in each substrate node and substrate link,providing self-organization capabilities. We propose a multiagentlearning algorithm that carries out the substrate network resourcemanagement in a coordinated and decentralised way. The taskof these agents is to use evaluative feedback to learn an optimalpolicy so as to dynamically allocate network resources to virtualnodes and links. The agents ensure that while the virtual networkshave the resources they need at any given time, only the requiredresources are reserved for this purpose. Simulations show thatour dynamic approach significantly improves the virtual networkacceptance ratio and the maximum number of accepted virtualnetwork requests at any time while ensuring that virtual networkquality of service requirements such as packet drop rate andvirtual link delay are not affected.

Dynamic patterns of flow in the workplace: characterizing within-individual variability using a complexity science approach

As a result of the growing interest in studying employee well-being as a complex process that portrays high levels of within-individual variability and evolves over time, this present study considers the experience of flow in the workplace from a nonlinear dynamical systems approach. Our goal is to offer new ways to move the study of employee well-being beyond linear approaches. With nonlinear dynamical systems theory as the backdrop, we conducted a longitudinal study using the experience sampling method and qualitative semi-structured interviews for data collection; 6981 registers of data were collected from a sample of 60 employees. The obtained time series were analyzed using various techniques derived from the nonlinear dynamical systems theory (i.e., recurrence analysis and surrogate data) and multiple correspondence analyses. The results revealed the following: 1) flow in the workplace presents a high degree of within-individual variability; this variability is characterized as chaotic for most of the cases (75%); 2) high levels of flow are associated with chaos; and 3) different dimensions of the flow experience (e.g., merging of action and awareness) as well as individual (e.g., age) and job characteristics (e.g., job tenure) are associated with the emergence of different dynamic patterns (chaotic, linear and random).

Matkustajainformaatiojärjestelmän toteuttaminen junaan

Matkustajainformaatio junassa koostuu vaunujen ulkopuolisilla kylkinäytöillä esitettävistä junan lähtö-, väli- ja määräasematiedoista yhdessä junan ja vaunujen myyntinumeroiden kanssa sekä vaunujen sisäpuolella automaattisista kuulutuksista ja matkustamon näytöillä esitettävästä staattisesta ja vaihtuvasta informaatiosta. Työssä toteutetaan matkustajainformaatiojärjestelmä käytettäväksi matkustajunissa. Järjestelmään syötetään ennen matkan alkua junan tiedot, jonka jälkeen se toimii automaattisesti ilman tarvetta junahenkilökunnan toimenpiteille. Poikkeustilanteissa junahenkilökunta voi estää järjestelmän toiminnan tai valita esiohjelmointuja erikoiskuulutuksia. Toteuttamismenetelmäksi valittiin C-ohjelmointikieli Linux-käyttöjärjestelmällä varustetulla sulautetulla rautatiekäyttöön suunnitellulla laitealustalla.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Modeling of electrolyte sorption – from phase equilibria to dynamic separation systems

In this thesis, general approach is devised to model electrolyte sorption from aqueous solutions on solid materials. Electrolyte sorption is often considered as unwanted phenomenon in ion exchange and its potential as an independent separation method has not been fully explored. The solid sorbents studied here are porous and non-porous organic or inorganic materials with or without specific functional groups attached on the solid matrix. Accordingly, the sorption mechanisms include physical adsorption, chemisorption on the functional groups and partition restricted by electrostatic or steric factors. The model is tested in four Cases Studies dealing with chelating adsorption of transition metal mixtures, physical adsorption of metal and metalloid complexes from chloride solutions, size exclusion of electrolytes in nano-porous materials and electrolyte exclusion of electrolyte/non-electrolyte mixtures. The model parameters are estimated using experimental data from equilibrium and batch kinetic measurements, and they are used to simulate actual single-column fixed-bed separations. Phase equilibrium between the solution and solid phases is described using thermodynamic Gibbs-Donnan model and various adsorption models depending on the properties of the sorbent. The 3-dimensional thermodynamic approach is used for volume sorption in gel-type ion exchangers and in nano-porous adsorbents, and satisfactory correlation is obtained provided that both mixing and exclusion effects are adequately taken into account. 2-Dimensional surface adsorption models are successfully applied to physical adsorption of complex species and to chelating adsorption of transition metal salts. In the latter case, comparison is also made with complex formation models. Results of the mass transport studies show that uptake rates even in a competitive high-affinity system can be described by constant diffusion coefficients, when the adsorbent structure and the phase equilibrium conditions are adequately included in the model. Furthermore, a simplified solution based on the linear driving force approximation and the shrinking-core model is developed for very non-linear adsorption systems. In each Case Study, the actual separation is carried out batch-wise in fixed-beds and the experimental data are simulated/correlated using the parameters derived from equilibrium and kinetic data. Good agreement between the calculated and experimental break-through curves is usually obtained indicating that the proposed approach is useful in systems, which at first sight are very different. For example, the important improvement in copper separation from concentrated zinc sulfate solution at elevated temperatures can be correctly predicted by the model. In some cases, however, re-adjustment of model parameters is needed due to e.g. high solution viscosity.

System for studies of control strategies applied in the refrigerated chambers

The process of cold storage chambers contributes largely to the quality and longevity of stored products. In recent years, it has been intensified the study of control strategies in order to decrease the temperature change inside the storage chamber and to reduce the electric power consumption. This study has developed a system for data acquisition and process control, in LabVIEW language, to be applied in the cooling system of a refrigerating chamber of 30m³. The use of instrumentation and the application developed fostered the development of scientific experiments, which aimed to study the dynamic behavior of the refrigeration system, compare the performance of control strategies and the heat engine, even due to the controlled temperature, or to the electricity consumption. This system tested the strategies for on-off control, PID and fuzzy. Regarding power consumption, the fuzzy controller showed the best result, saving 10% when compared with other tested strategies.