Characterisation of the microbiota of traditional fermented beverages and screening these and other populations for novel antimicrobial producers and gene clusters

To screen for novel ribosomally synthesised antimicrobials, in-silico genome mining was performed on all publically available fully sequenced bacterial genomes. 49 novel type 1 lantibiotic clusters were identified from a number of species, genera and phyla not usually associated with lantibiotic production, and indicates high prevalence. A crucial step towards the commercialisation of fermented beverages is the characterisation of the microbial content. To achieve this goal, we applied next-generation sequencing techniques to analyse the bacterial and yeast populations of the organic, symbiotically-fermented beverages kefir, water kefir and kombucha. A number of minor components were revealed, many of which had not previously been associated with these beverages. The dominant microorganism in each of the water kefir grains and fermentates was Zymomonas, an ethanol-producing bacterium that had not previously been detected on such a scale. These studies represent the most accurate description of these populations to date, and should aid in future starter design and in determining which species are responsible for specific attributes of the beverages. Finally, high-throughput robotics was applied to screen for the presence of antimicrobial producers associated with these beverages. This revealed a low frequency of bacteriocin production amongst the bacterial isolates, with only lactococcins A, B and LcnN of lactococcin M being identified. However, a proteinaceous antimicrobial produced by the yeast Dekkera bruxellensis, isolated from kombucha, was found to be active against Lactobacillus bulgaricus. This peptide was patially purified.

Fabrication, characterisation and electroanalysis at 1-dimensional nanostructures

Integrated nanowire electrodes that permit direct, sensitive and rapid electrochemical based detection of chemical and biological species are a powerful emerging class of sensor devices. As critical dimensions of the electrodes enter the nanoscale, radial analyte diffusion profiles to the electrode dominate with a corresponding enhancement in mass transport, steady-state sigmoidal voltammograms, low depletion of target molecules and faster analysis. To optimise these sensors it is necessary to fully understand the factors that influence performance limits including: electrode geometry, electrode dimensions, electrode separation distances (within nanowire arrays) and diffusional mass transport. Therefore, in this thesis, theoretical simulations of analyte diffusion occurring at a variety of electrode designs were undertaken using Comsol Multiphysics®. Sensor devices were fabricated and corresponding experiments were performed to challenge simulation results. Two approaches for the fabrication and integration of metal nanowire electrodes are presented: Template Electrodeposition and Electron-Beam Lithography. These approaches allow for the fabrication of nanowires which may be subsequently integrated at silicon chip substrates to form fully functional electrochemical devices. Simulated and experimental results were found to be in excellent agreement validating the simulation model. The electrochemical characteristics exhibited by nanowire electrodes fabricated by electronbeam lithography were directly compared against electrochemical performance of a commercial ultra-microdisc electrode. Steady-state cyclic voltammograms in ferrocenemonocarboxylic acid at single ultra-microdisc electrodes were observed at low to medium scan rates (≤ 500 mV.s-1). At nanowires, steady-state responses were observed at ultra-high scan rates (up to 50,000 mV.s-1), thus allowing for much faster analysis (20 ms). Approaches for elucidating faradaic signal without the requirement for background subtraction were also developed. Furthermore, diffusional process occurring at arrays with increasing inter-electrode distance and increasing number of nanowires were explored. Diffusion profiles existing at nanowire arrays were simulated with Comsol Multiphysics®. A range of scan rates were modelled, and experiments were undertaken at 5,000 mV.s-1 since this allows rapid data capture required for, e.g., biomedical, environmental and pharmaceutical diagnostic applications.

Flat surfaces of finite type in the 3-sphere

We introduce the notion of flat surfaces of finite type in the 3- sphere, give the algebro-geometric description in terms of spectral curves and polynomial Killing fields, and show that finite type flat surfaces generated by curves on S2 with periodic curvature functions are dense in the space of all flat surfaces generated by curves on S2 with periodic curvature functions.

Generation and characterisation of biologically active milk-derived protein and peptide fractions

In recent years, extensive research has been carried out on the health benefits of milk proteins and peptides. Biologically active peptides are defined as specific protein fragments which have a positive impact on the physiological functions of the body; such peptides are produced naturally in vivo, but can also be generated by physical and/or chemical processes, enzymatic hydrolysis and/or microbial fermentation. The aims of this thesis were to investigate not only the traditional methods used for the generation of bioactive peptides, but also novel processes such as heat treatment, and the role of indigenous milk proteases, e.g., in mastitic milk, in the production of such peptides. In addition, colostrum was characterised as a source of bioactive proteins and peptides. Firstly, a comprehensive study was carried out on the composition and physical properties of colostrum throughout the early-lactation period. Marked differences in the physico-chemical properties of colostrum compared with milk were observed. Various fractions of colostrum were also tested for their effect on the secretion of pro- and anti-inflammatory cytokines from a macrophage cell line and bone marrow dendritic cells, as well as insulin secretion from a pancreatic beta cell line. A significant reduction in the secretion of the pro-inflammatory cytokines, TNF-α, IL-6, IL-1β and IL-12, a significant increase in the secretion of the anti-inflammatory cytokine, IL-10, as well as a significant increase in insulin secretion were observed for various colostrum fractions. Another study examined the early proteomic changes in the milk of 8 cows in response to infusion with the endotoxin lipopolysaccharide (LPS) at quarter level in a model mastitic system; marked differences in the protein and peptide profile of milk from LPS challenged cows were observed, and a pH 4.6-soluble fraction of this milk was found to cause a substantial induction in the secretion of IL-10 from a murine macrophage cell line. Heat-induced hydrolysis of sodium caseinate was investigated from the dual viewpoints of protein breakdown and peptide formation, and, a peptide fraction produced in this manner was found to cause a significant increase in the secretion of the anti-inflammatory cytokine, IL-10, from a murine macrophage cell line. The effects of sodium caseinate hydrolysed by chymosin on the gut-derived satiety hormone glucagon-like peptide-1 (GLP-1) were investigated; the resulting casein-derived peptides displayed good in vitro and in vivo secretion of GLP-1. Overall, the studies described in this thesis expand on current knowledge and provide good evidence for the use of novel methods for the isolation, generation and characterisation of bioactive proteins and/or peptides.

High-efficiency photovoltaics through mechanically stacked integration of solar cells based on the InP lattice constant

Solar Energy is a clean and abundant energy source that can help reduce reliance on fossil fuels around which questions still persist about their contribution to climate and long-term availability. Monolithic triple-junction solar cells are currently the state of the art photovoltaic devices with champion cell efficiencies exceeding 40%, but their ultimate efficiency is restricted by the current-matching constraint of series-connected cells. The objective of this thesis was to investigate the use of solar cells with lattice constants equal to InP in order to reduce the constraint of current matching in multi-junction solar cells. This was addressed by two approaches: Firstly, the formation of mechanically stacked solar cells (MSSC) was investigated through the addition of separate connections to individual cells that make up a multi-junction device. An electrical and optical modelling approach identified separately connected InGaAs bottom cells stacked under dual-junction GaAs based top cells as a route to high efficiency. An InGaAs solar cell was fabricated on an InP substrate with a measured 1-Sun conversion efficiency of 9.3%. A comparative study of adhesives found benzocyclobutene to be the most suitable for bonding component cells in a mechanically stacked configuration owing to its higher thermal conductivity and refractive index when compared to other candidate adhesives. A flip-chip process was developed to bond single-junction GaAs and InGaAs cells with a measured 4-terminal MSSC efficiency of 25.2% under 1-Sun conditions. Additionally, a novel InAlAs solar cell was identified, which can be used to provide an alternative to the well established GaAs solar cell. As wide bandgap InAlAs solar cells have not been extensively investigated for use in photovoltaics, single-junction cells were fabricated and their properties relevant to PV operation analysed. Minority carrier diffusion lengths in the micrometre range were extracted, confirming InAlAs as a suitable material for use in III-V solar cells, and a 1-Sun conversion efficiency of 6.6% measured for cells with 800 nm thick absorber layers. Given the cost and small diameter of commercially available InP wafers, InGaAs and InAlAs solar cells were fabricated on alternative substrates, namely GaAs. As a first demonstration the lattice constant of a GaAs substrate was graded to InP using an InxGa1-xAs metamorphic buffer layer onto which cells were grown. This was the first demonstration of an InAlAs solar cell on an alternative substrate and an initial step towards fabricating these cells on Si. The results presented offer a route to developing multi-junction solar cell devices based on the InP lattice parameter, thus extending the range of available bandgaps for high efficiency cells.

High speed optical communication systems: From modulation formats to radically new fibres

High volumes of data traffic along with bandwidth hungry applications, such as cloud computing and video on demand, is driving the core optical communication links closer and closer to their maximum capacity. The research community has clearly identifying the coming approach of the nonlinear Shannon limit for standard single mode fibre [1,2]. It is in this context that the work on modulation formats, contained in Chapter 3 of this thesis, was undertaken. The work investigates the proposed energy-efficient four-dimensional modulation formats. The work begins by studying a new visualisation technique for four dimensional modulation formats, akin to constellation diagrams. The work then carries out one of the first implementations of one such modulation format, polarisation-switched quadrature phase-shift keying (PS-QPSK). This thesis also studies two potential next-generation fibres, few-mode and hollow-core photonic band-gap fibre. Chapter 4 studies ways to experimentally quantify the nonlinearities in few-mode fibre and assess the potential benefits and limitations of such fibres. It carries out detailed experiments to measure the effects of stimulated Brillouin scattering, self-phase modulation and four-wave mixing and compares the results to numerical models, along with capacity limit calculations. Chapter 5 investigates hollow-core photonic band-gap fibre, where such fibres are predicted to have a low-loss minima at a wavelength of 2μm. To benefit from this potential low loss window requires the development of telecoms grade subsystems and components. The chapter will outline some of the development and characterisation of these components. The world's first wavelength division multiplexed (WDM) subsystem directly implemented at 2μm is presented along with WDM transmission over hollow-core photonic band-gap fibre at 2μm. References: [1]P. P. Mitra, J. B. Stark, Nature, 411, 1027-1030, 2001 [2] A. D. Ellis et al., JLT, 28, 423-433, 2010.

Analysis and optimisation of semiconductor reflective modulators for optical networks

Reflective modulators based on the combination of an electroabsorption modulator (EAM) and semiconductor optical amplifier (SOA) are attractive devices for applications in long reach carrier distributed passive optical networks (PONs) due to the gain provided by the SOA and the high speed and low chirp modulation of the EAM. Integrated R-EAM-SOAs have experimentally shown two unexpected and unintuitive characteristics which are not observed in a single pass transmission SOA: the clamping of the output power of the device around a maximum value and low patterning distortion despite the SOA being in a regime of gain saturation. In this thesis a detailed analysis is carried out using both experimental measurements and modelling in order to understand these phenomena. For the first time it is shown that both the internal loss between SOA and R-EAM and the SOA gain play an integral role in the behaviour of gain saturated R-EAM-SOAs. Internal loss and SOA gain are also optimised for use in a carrier distributed PONs in order to access both the positive effect of output power clamping, and hence upstream dynamic range reduction, combined with low patterning operation of the SOA Reflective concepts are also gaining interest for metro transport networks and short reach, high bit rate, inter-datacentre links. Moving the optical carrier generation away from the transmitter also has potential advantages for these applications as it avoids the need for cooled photonics being placed directly on hot router line-cards. A detailed analysis is carried out in this thesis on a novel colourless reflective duobinary modulator, which would enable wavelength flexibility in a power-efficient reflective metro node.

Mechanically stacked solar cells for concentrator photovoltaics

The power output of dual-junction mechanically stacked solar cells comprising different sub-cell materials in a terrestrial concentrating photovoltaic module has been evaluated. The ideal bandgap combination of both cells in a stack was found using EtaOpt. A combination of 1.4 eV and 0.7 eV has been found to produce the highest photovoltaic conversion efficiency under the AM1.5 Direct Solar Spectrum with x500 concentration. As EtaOpt does not consider the absorption profile of solar cell materials; the practical power output per unit area of a dual junction mechanically stacked solar cell has been modelled considering the optical absorption co-efficients and thicknesses of the individual solar cells. The model considered a GaAs top cell and a Ge, GaSb, Ga0.47In0.53As or Si bottom cell. It was found that GaSb gives the highest power contribution as a bottom cell in a dual junction configuration followed by Ge and GaInAs. While the additional power provided by a Si bottom cell is less than these it remains a suitable candidate for a bottom cell owing to its lower cost

Prehistoric burnt mound archaeology in Ireland

It is apparent from the widespread distribution of burnt mounds that Ireland was the most prolific user of pyrolithic technology in Bronze Age Europe. Even though burnt mounds are the most common prehistoric site type in Ireland, they have not received the same level of research as other prehistoric sites. This is primarily due to the paucity of artefact finds and the unspectacular nature of the archaeological remains, compounded by the absence of an appropriate research framework. Due to the widespread use of the technology and the various applications of hot water, narratives related to these sites have revolved around discussions of age and function. This has resulted in a generalised classification, where the term ‘fulacht fia’ covers several site types that have similar features but differing functions and age. The study presents a re-evaluation of fulachtaí fia in light of some 1000 sites excavated in Ireland. This is the most comprehensive study undertaken on the use of pyrolithic technology in prehistoric Ireland, dealing with different aspects of site function, chronology, social role and cultural context. A number of key areas have been identified in relation to our understanding of these sites. Previous investigations of burnt mounds have provided little information on the temporality of individual sites. It has been established that appropriate sampling strategies can provide important information about the formation of individual sites, their relationships to each other and to other monuments in the same cultural landscape. The evidence suggests that considerable caution should be exercised with regard to certain single radiometric dates from burnt stone deposits, based on the degree of certainty of the dated sample and its association with pyrolithic activity. Previously regarded as Bronze Age in date, there are now numerous examples of pyrolithic-type processes in earlier contexts, with the origins of the water-boiling phenomenon now considered to be Early Neolithic. A review of recent excavation evidence provides new insights into the use of pyrolithic technology for cooking. This is based on the discovery of faunal remains at several sites, combined with insights gained through experimental studies. The model proposed here is of open-air communal feasting and food sharing hosted by small family groups, as a medium for social bonding and the construction of community. It is also argued that if cooking was the primary activity taken place at these sites, this should not be viewed as a mundane functional activity, but rather one that actively contributed to the constitution of social relations. The formality of the technology is also supported by the presence of possible specialised structures, some of which were used for cooking/feasting while others were for ritualised sweat-bathing. The duration and frequency of activities associated with burnt mounds and the opportunities they provided for social interaction suggest that these sites contributed some familiar frames of reference to contemporary discourse.

“Something isn’t right here”: American exceptionalism and the creative nonfiction of the Vietnam War

In this thesis, I argue that few attempts were as effective in correcting the exceptionalist ethos of the United States than the creative nonfiction written by the veterans and journalists of the Vietnam War. Using critical works on creative nonfiction, I identify the characteristics of the genre that allowed Paul John Eakin to call it ‘a special kind of fiction.’ I summarise a brief history of creative nonfiction to demonstrate how it became a distinctly American form despite its Old World origins. I then claim that it was the genre most suited to the kind of ideological transformation that many hoped to instigate in U.S. society in the aftermath of Vietnam. Following this, the study explores how this “new” myth-making process occurred. I use Tim O’Brien’s If I Die in a Combat Zone and Philip Caputo’s A Rumor of War to illustrate how autobiography/memoir was able to demonstrate the detrimental effect that America’s exceptionalist ideology was having on its population. Utilising narrative and autobiographical theory, I contend that these accounts represented a collective voice which spoke for all Americans in the years after Vietnam. Using Neil Sheehan’s A Bright Shining Lie and C.D.B. Bryan’s Friendly Fire, I illustrate how literary journalism highlighted the hubris of the American government. I contend that while poiesis is an integral attribute of creative nonfiction, by the inclusion of extraneous bibliographic material, authors of the genre could also be seen as creating a literary context predisposing the reader towards an empirical interpretation of the events documented within. Finally, I claim that oral histories were in their essence a synthesis of “everyman” experiences very much in keeping with the American zeitgeist of the early Eighties. Focussing solely on Al Santoli’s Everything We Had, I demonstrate how such polyphonic narratives personalised the history of the Vietnam War.

Effectuation and its implications for socio-technical design science research in information systems

We study the implications of the effectuation concept for socio-technical artifact design as part of the design science research (DSR) process in information systems (IS). Effectuation logic is the opposite of causal logic. Ef-fectuation does not focus on causes to achieve a particular effect, but on the possibilities that can be achieved with extant means and resources. Viewing so-cio-technical IS DSR through an effectuation lens highlights the possibility to design the future even without set goals. We suggest that effectuation may be a useful perspective for design in dynamic social contexts leading to a more dif-ferentiated view on the instantiation of mid-range artifacts for specific local ap-plication contexts. Design science researchers can draw on this paper’s conclu-sions to view their DSR projects through a fresh lens and to reexamine their re-search design and execution. The paper also offers avenues for future research to develop more concrete application possibilities of effectuation in socio-technical IS DSR and, thus, enrich the discourse.

Na marbhnaí do Shéamas Óg Mac Coitir (1689-1720)

Go príomha, is tráchtas é seo a dhéanann staidéar ar ghné de litríocht iar-chlasaiceach na Gaeilge. Baineann sé go háirithe leis an sraith chaointe nó marbhnaí i bhfoirm véarsaíochta a cumadh do Shéamas Óg Mac Coitir (1689-1720), duine uasal Caitliceach ó Charraig Tuathail, Co. Chorcaí, nuair a ciontaíodh é in éigniú Elizabeth Squibb, bean de Chumann na gCarad; nuair a cuireadh pionós an bháis air; agus nuair a crochadh é i gCathair Chorcaí an 7 Bealtaine, 1720. Ó thaobh na staire de, scrúdaítear Clann Choitir mar shampla de theaghlach nár cheil a ndílseacht do chúis pholaitiúil na Stíobhartach agus a sheas an fód go cróga faoi mar a bhí a ngreim polaitiúil á dhaingniú ag an gCinsealacht Phrotastúnach ó dheireadh an 17ú haois amach. Tagraítear do sheicteachas na sochaí comhaimseartha agus don teannas idir an pobal Caitliceach agus an pobal Protastúnach ag an am. Déantar scagadh ar an véarsaíocht mar fhoinse luachmhar do dhearcadh míshásta an mhóraimh Chaitlicigh ar struchtúr polaitiúil chontae Chorcaí (agus na hÉireann) i dtosach an 18ú haois. Is feiniméan liteartha an dlús véarsaíochta seo a bhaineann go háirithe le traidisiún liteartha Chorcaí. Tá na dánta curtha in eagar agus aistriúchán go Béarla curtha ar fáil: is é seo croí an tráchtais. Tá an t-eagrán bunaithe ar scrúdú cuimsitheach ar thraidisiún na lsí; pléitear modheolaíocht na heagarthóireachta. Déantar iarracht ar na dánta a shuíomh sa traidisiún casta liteartha sa tráchtaireacht tosaigh; sa chuid eile den bhfearas scoláiriúil, scrúdaítear ceisteanna a bhaineann le cúrsaí teanga, foclóra, meadarachta agus stíle. Tá innéacsanna agus liosta foinsí le fáil i ndeireadh an tráchtais.

Planning a portfolio of controls for software development

A growing number of software development projects successfully exhibit a mix of agile and traditional software development methodologies. Many of these mixed methodologies are organization specific and tailored to a specific project. Our objective in this research-in-progress paper is to develop an artifact that can guide the development of such a mixed methodology. Using control theory, we design a process model that provides theoretical guidance to build a portfolio of controls that can support the development of a mixed methodology for software development. Controls, embedded in methods, provide a generalizable and adaptable framework for project managers to develop their mixed methodology specific to the demands of the project. A research methodology is proposed to test the model. Finally, future directions and contributions are discussed.

Estimating the magnitude of trastuzumab effects within patient subgroups in the HERA trial.

BACKGROUND: Trastuzumab (Herceptin(R)) improves disease-free survival (DFS) and overall survival for patients with human epidermal growth factor receptor 2 (HER2)-positive early breast cancer. We aimed to assess the magnitude of its clinical benefit for subpopulations defined by nodal and steroid hormone receptor status using data from the Herceptin Adjuvant (HERA) study. PATIENTS AND METHODS: HERA is an international multicenter randomized trial comparing 1 or 2 years of trastuzumab treatment with observation after standard chemotherapy in women with HER2-positive breast cancer. In total, 1703 women randomized to 1-year trastuzumab and 1698 women randomized to observation were included in these analyses. Median follow-up was 23.5 months. The primary endpoint was DFS. RESULTS: The overall hazard ratio (HR) for trastuzumab versus observation was 0.64 [95% confidence interval (CI) 0.54-0.76; P < 0.0001], ranging from 0.46 to 0.82 for subgroups. Estimated improvement in 3-year DFS in subgroups ranged from +11.3% to +0.6%. Patients with the best prognosis (those with node-negative disease and tumors 1.1-2.0 cm) had benefit similar to the overall cohort (HR 0.53, 95% CI 0.26-1.07; 3-year DFS improvement +4.6%, 95% CI -4.0% to 13.2%). CONCLUSIONS: Adjuvant trastuzumab therapy reduces the risk of relapse similarly across subgroups defined by nodal status and steroid hormone receptor status, even those at relatively low risk for relapse.

Bone fractures among postmenopausal patients with endocrine-responsive early breast cancer treated with 5 years of letrozole or tamoxifen in the BIG 1-98 trial.

To compare the incidence and timing of bone fractures in postmenopausal women treated with 5 years of adjuvant tamoxifen or letrozole for endocrine-responsive early breast cancer in the Breast International Group (BIG) 1-98 trial.