1000 resultados para Dipcoating methods
Resumo:
Pt-, Pd-, and Zr-doped SnO2 thin films and dopant-free VOx films were fabricated by planar magnetron sputtering. Tests for sensitivity to SO2 for all samples were conducted at 180 degreesC, and the sensitivities were investigated ex situ with photometric and ellipsometric methods at room temperature. It was found that the optical sensitivities as well as the sensitive wavelength region for SnO2 films could be tuned by doping. The Pd-doped SnO2 films had good sensitivity in the visible range, and the Zr-doped in the near IR. The dominant sensitive wavelength region for VOx films fell into the visible range, and the ratio of the sensitivity in the visible to that in the near IR increased with O-2/Ar in the depositing atmosphere. (C) 2001 society of Photo-Optical instrumentation Engineers .
Resumo:
All species of fish are able to propagate and maintain their numbers provided that no adverse influence occurs to change the compatible environment, the salmon is no exception. Propagation of fish by artificial means has long been a subject of discussion amongst fishery workers and views have been expressed (both favourable and unfavourable) on the merits of the various methods employed. In an attempt to discover whether artificial propagation was necessary and also to find the best methods of propagation to adopt in the various rivers, a phased programme of investigation into natural spawning efficiency and the results obtained by various methods of artificial propagation was started in the Lancashire River Board area during 1957. The object being to seek information on: (1) The survival of ova from natural spawnings to the eyed and alevin stages. (2) The population density of feeding fry (from natural spawnings) at various intervals of development. (3) The viability of green ova and eyed ova- when planted artificially. (4a) The survival to 0+ parr from implants of eyed ova unfed fry and fed fry. (4b) Populations per unit area of 0+ parr from various planting densities of eyed ova, unfed fry and fed fry. Sampling stations were selected on the Rivers Ribble, Lune and Wyre watersheds for the purpose of marking and examination of natural salmon redds.
Resumo:
An assessment of three methods of fish capture, to establish the best fishing method which reflects the best range of sizes and species of fish in a given area. The methods used were trawl netting, electrofishing, and seine netting which were assessed on the Crossens drainage system near Southport. The report also includes a study of roach / bream hybrids that were found at the site, which focuses on their distinguishing features and compared with the features of roach and bream.
Resumo:
Fish growth is commonly estimated from length-at-age data obtained from otoliths. There are several techniques for estimating length-at-age from otoliths including 1) direct observed counts of annual increments; 2) age adjustment based on a categorization of otolith margins; 3) age adjustment based on known periods of spawning and annuli formation; 4) back-calculation to all annuli, and 5) back-calculation to the last annulus only. In this study we compared growth estimates (von Bertalanffy growth functions) obtained from the above five methods for estimating length-at-age from otoliths for two large scombrids: narrow-barred Spanish mackerel (Scomberomorus commerson) and broad-barred king mackerel (Scomberomorus semifasciatus). Likelihood ratio tests revealed that the largest differences in growth occurred between the back-calculation methods and the observed and adjusted methods for both species of mackerel. The pattern, however, was more pronounced for S. commerson than for S. semifasciatus, because of the pronounced effect of gear selectivity demonstrated for S. commerson. We propose a method of substituting length-at-age data from observed or adjusted methods with back-calculated length-at-age data to provide more appropriate estimates of population growth than those obtained with the individual methods alone, particularly when faster growing young fish are disproportionately selected for. Substitution of observed or adjusted length-at-age data with back-calculated length-at-age data provided more realistic estimates of length for younger ages than observed or adjusted methods as well as more realistic estimates of mean maximum length than those derived from backcalculation methods alone.
Resumo:
Commercial catches taken in southwestern Australian waters by trawl fisheries targeting prawns and scallops and from gillnet and longline fisheries targeting sharks were sampled at different times of the year between 2002 and 2008. This sampling yielded 33 elasmobranch species representing 17 families. Multivariate statistics elucidated the ways in which the species compositions of elasmobranchs differed among fishing methods and provided benchmark data for detecting changes in the elasmobranch fauna in the future. Virtually all elasmobranchs caught by trawling, which consisted predominantly of rays, were discarded as bycatch, as were approximately a quarter of the elasmobranchs caught by both gillnetting and longlining. The maximum lengths and the lengths at maturity of four abundant bycatch species, Heterodontus portusjacksoni, Aptychotrema vincentiana, Squatina australis, and Myliobatis australis, were greater for females than males. The L50 determined for the males of these species at maturity by using full clasper calcification as the criterion of maturity did not differ significantly from the corresponding L50 derived by using gonadal data as the criterion for maturity. The proportions of the individuals of these species with lengths less than those at which 50% reach maturity were far greater in trawl samples than in gillnet and longline samples. This result was due to differences in gear selectivity and to trawling being undertaken in shallow inshore waters that act as nursery areas for these species. Sound quantitative data on the species compositions of elasmobranchs caught by commercial fisheries and the biological characteristics of the main elasmobranch bycatch species are crucial for developing strategies for conserving these important species and thus the marine ecosystems of which they are part.
Resumo:
Using data collected simultaneously from a trawl and a hydrophone, we found that temporal and spatial trends in densities of juvenile Atlantic croaker (Micropogonias undulatus) in the Neuse River estuary in North Carolina can be identified by monitoring their sound production. Multivariate analysis of covariance (MA NCOVA) revealed that catch per unit of effort (CPUE) of Atlantic croaker had a significant relationship with the dependent variables of sound level and peak frequency of Atlantic croaker calls. Tests of between-subject correspondence failed to detect relationships between CPUE and either of the call parameters, but statistical power was low. Williamson’s index of spatial overlap indicated that call detection rate (expressed by a 0–3 calling index) was correlated in time and space with Atlantic croaker CPUE. The correspondence between acoustic parameters and trawl catch rates varied by month and by habitat. In general, the calling index had a higher degree of overlap with this species’ density than did the received sound level of their calls. Classification and regression tree analysis identified calling index as the strongest correlate of CPUE. Passive acoustics has the potential to be an inexpensive means of identifying spatial and temporal trends in abundance for soniferous fish species.
Resumo:
Estimation of individual egg production (realized fecundity) is a key step either to understand the stock and recruit relationship or to carry out fisheries-independent assessment of spawning stock biomass using egg production methods. Many fish are highly fecund and their ovaries may weigh over a kilogram; therefore the work time can be consuming and require large quantities of toxic fixative. Recently it has been shown for Atlantic cod (Gadus morhua) that image analysis can automate fecundity determination using a power equation that links follicles per gram ovary to the mean vitellogenic follicular diameter (the autodiametric method). In this article we demonstrate the precision of the autodiametric method applied to a range of species with different spawning strategies during maturation and spawning. A new method using a solid displacement pipette to remove quantitative fecundity samples (25, 50, 100, and 200 milligram [mg]) is evaluated, as are the underlying assumptions to effectively fix and subsample the ovary. Finally, we demonstrate the interpretation of dispersed formaldehyde-fixed ovarian samples (whole mounts) to assess the presence of atretic and postovulatory follicles to replace labor intensive histology. These results can be used to estimate down regulation (production of atretic follicles) of fecundity during maturation.
Resumo:
In the problem of one-class classification (OCC) one of the classes, the target class, has to be distinguished from all other possible objects, considered as nontargets. In many biomedical problems this situation arises, for example, in diagnosis, image based tumor recognition or analysis of electrocardiogram data. In this paper an approach to OCC based on a typicality test is experimentally compared with reference state-of-the-art OCC techniques-Gaussian, mixture of Gaussians, naive Parzen, Parzen, and support vector data description-using biomedical data sets. We evaluate the ability of the procedures using twelve experimental data sets with not necessarily continuous data. As there are few benchmark data sets for one-class classification, all data sets considered in the evaluation have multiple classes. Each class in turn is considered as the target class and the units in the other classes are considered as new units to be classified. The results of the comparison show the good performance of the typicality approach, which is available for high dimensional data; it is worth mentioning that it can be used for any kind of data (continuous, discrete, or nominal), whereas state-of-the-art approaches application is not straightforward when nominal variables are present.