Valor de corte para teste respiratório com isótopos estáveis (Carbono 13) no diagnóstico do Helicobacter pylori utilizando IRMS para análise do sopro

After the isolation of Helicobacter pylori from an injury at the stomach mucosa by Marshall and Wareen, work that was recognized with the Nobel Prize of Medicine or Physiology in 2005, many other works showed the relationship between the presence of H. pylori and diseases at the digestive system, such as gastritis, gastric, duodenal and peptic ulcer, and stomach cancer. The 13C-Urea Breath Test - 13C-UBT is a non-invasive diagnostic method that utilizes the breath of a patient to determine the presence of H. pylori through stable isotopes. This work aimed to find an ideal 13C-UBT Isotopic Ratio Mass Spectroscopy cut-off value (a threshold between positive and negative) to diagnose H. pylori infection at Brazilian population. Patients were selected at the UNESP-Botucatu Clinical Hospital Endoscopy Section. With these results it was possible to indicate that the best cut-off value is between 2.5 to 6 ‰ of Delta Over Baseline (DOB)

Produção de ramnolipídios por linhagens de Pseusomonas aeruginosa em diferentes fontes de carbono e condições de cultivo

Os biossurfactantes, moléculas tenso-ativas sintetizadas por microrganismos, apresentam propriedades biológicas e superficiais que podem ser aplicadas a processos industriais diversos. Apesar das vantagens apresentadas, não são amplamente utilizados pela indústria, devido ao alto custo de produção, baixa produtividade e uso de substratos caros. Bactérias do gênero Pseudomonas são conhecidas por sintetizarem ramnolipídios, moléculas tenso-ativas promissoras em termos de produção industrial, por apresentarem excelentes propriedades tenso-ativas, além de características físico-químicas e biológicas que permitem a obtenção em concentrações superiores a outros biossurfactantes. O uso de substratos alternativos seria uma estratégia que facilitaria o desenvolvimento industrial de sua produção. A proposta deste trabalho é dar continuidade ao estudo da produção de ramnolipídios a partir de substratos não-convencionais (n-parafina, óleos vegetais utilizados em frituras, glicerol) por isolados de P. aeruginosa.

Pós-processamento de formas de ondas oriundas de descargas atmosféricas no Centro de Estudos de Descargas Atmosféricas e Alta Tensão (CENDAT) – IEE/USP

Atmospheric Discharges are responsible for several lost in the electrical system therefore it´s done studies to find ways to reduce the problem caused by discharges. This branch of engineering is necessary the gathering, stock and analysis of large quantity of data to validate or refuse the many studies produced about it The CENDAT proposed a project to collect data on induced voltages in distribution lines and current waveform of the lightning, but a difficulty that arose was the accumulation of data due to lack of manpower available to catalog all the data collected. Thinking in this difficulty, the engineer Acacio Silva Neto CENDAT´s researcher with trainees began to develop a program to solve this problem. This work keeps the development of this program in order to solve the problem of accumulation of data

Síntese de nanopartículas de prata suportadas sobre nanotubos de carbono de paredes múltiplas para eletrooxidação de benzeno

Silver nanoparticles (Ag) were deposited on multi-walled carbon nanotube by eletroless. The hybrid Ag/MWCNT was used in the modification of glassy carbon electrode (GC) surface. The electrochemical characterization confirmed the presence of Ag in the nanocomposite has been showed that the synthesis was successful. The GC electrode modified with Ag/MWCNT film was evaluated for electro-oxidation of benzene. The electrochemical behavior presented an improvement on the catalytic surface in relation to non-modified GC electrode. The anodic peak current increased the magnitude in three times when compared with the CG electrode modified only with MWCNT

Produção de eletrodos em carbono vítreo monolítico e reticulado a partir da resina furfurílica dopada com cobre

The glassy carbon is a material with a huge technological evolution. Due to its lightness, biocompatibility and their thermal and electrical properties this material finds applications in several industrial fields such as electronics, medical, aerospace and chemical. In order to explore the conductive properties of glassy carbon for use as modified electrodes, the present work aims the processing of monolithic and reticulated glassy carbon with colloidal copper for use in electrochemical applications. First, the best parameters for the cure of furfuryl alcohol resin doped were established through viscosimetry measurements and pressurized differential scanning calorimetry. The analysis of the micrographs of the cured resins show that copper concentrations above 3% weight, generate higher porosity in the material. The characterizations of the monolithic and reticulated glassy carbon resulting from carbonization were performed by scanning electron microscopy (SEM), Raman and Electrochemical impedance spectroscopy, and although it was not possible to detect the presence of copper by SEM, the influence of these particles have been observed by Raman and FT-IR spectra and electrochemical behavior of the material. The decrease in conductivity of monolithic and reticulated glassy carbon in the presence of copper may be related to the defects caused by the presence of copper in the structure of the material.

Produção de enzimas xilanolíticas por fungo filamentoso em diferentes fontes de carbono

O trabalho teve como objetivo principal identificar a produção de enzimas xilanolíticas de um fungo encontrado no solo amazônico a partir do seu crescimento em diferentes fontes de carbono e em dois tipos de meio de cultivo: meio semi sólido e meio líquido Vogel. No mei semi sólido o crescimento do fungo aconteceu durante 7 dias, já no meio líquido foi feito em quatro tempos diferentes: 24, 36, 48 e 52 horas. As fontes de carbono usadas para ambos os meios foram: Após o crescimento os meios foram filtrados e foram realizadas a dosagem de proteína pelo método de Lowry e a determinação da atividade específica. Os filtrados foram concentrados através de tratamento com caulin, diálise e precipitação com acetona. Com os filtrados selecionados pode-se determinar o pH e a temperatura ótimas para a xilanase através de curvas de pH e temperatura. O fungo estudado produz enzimas do complexo xilanolítico, sendo que os melhores resultados foram encontrados usando a xilana no meio líquido e o sabugo de milho no meio semi sólido. Para a enzima encontrada o pH de atividade ótima é no valor 5,0 e foram encontrados dois picos de temperaturas ótima, na faixa de 30ºC e 60ºC, o que pode indicar a presença de mais de uma enzima do complexo xilanolítico

Algumas considerações geográficas sobre as descargas elétricas atmosféricas no Estado de São Paulo

The atmospheric events denominated electric discharges are complexes and represent social, economic and environmental damages. For this research, it was made the bibliographical survey about this matter, mapping, phenomenon and victims analysis that occurred at The State of São Paulo, between 2005/2006

Uso do ATP para simulações de descargas atmosféricas em para-raios de 15 kV dos serviços auxiliares de subestações de energia elétrica

This paper addresses the topics required for the selection of surge arresters used, the output of autotransformers, which protect the system Auxiliary Services (SE) of an electrical substation. Surge arresters used are part of the Protection System Lightning (SPDA). Transmission lines mostly run through regions with orographic well diversified and have constant weather changes, which lead to many undesirable interactions with electromagnetic phenomena, such as giving rise to blackout on 10 November 2009, which left nine states without power, which led to unplanned shutdowns in the system that left millions of people without electricity. This work of completion is to determine whether the method used in the selection of surge arresters meet the protection needs faced by a substation auxiliary services, through the use of software use ATPDraw

Auditoria energética em caldeira de monóxido de carbono

Within the concepts of sustainability, energy audit magnified its importance in managing systems in industrial plants. Can reduce waste and save energy representative, the improvement and development of thermal and electrical systems can be very attractive to business. With the focus on a boiler generating steam, the energy audit aimed to increase efficiency and eliminate energy losses of the heat engine. The boiler in question is commonly called CO boiler because most of the calorific power provided comes from this. Using a fuel gas from the catalyst regeneration process, it has featured in the boiler power generation system of the refinery. Burning a mixture of gaseous components from discarded into the atmosphere, the heat engine can generate tons of steam just as the other boilers installed. The challenge was to work with this gas mixture and obtain maximum efficiency, reduce moisture and enjoy the warmth of the heat exchange have been studied and recommended. Every project, from evaluation of the variables in the composition of fuel gas, to the using of heat exchangers and refrigeration system are suitable for evaluation and improvements

Comparação de compósitos obtidos via RTM de resina epóxi e fibra de carbono com e sem descontinuidade nos tecidos

Technology is growing interest in the use of composites, due to the requirement of lighter materials and more resistant, factors essential to meet the project specifications and reduce the operational cost. In the production of high performance structural composites, considering the aerospace criteria, the domestic industry has shown interest in the process of resin transfer molding (RTM) for reproducibility and low cost. This process is suitable for producing components of polymeric composites with relatively simple geometries, consistent thicknesses, high quality finish with no size limitations. The objective of this work was machined carbon steel to make a matched-die tooling for RTM and produce two composite plates of epoxy resin and carbon fiber fabric with and without induced discontinuities, which were compared towards their impregnation with ultrasound, their properties via tensile tests and thermal analysis. In ultrasonic inspection, it was found good impregnation of the preform of both composites. In the thermal analysis it was possible to check the degradation temperature of the composites, the glass transition temperature and it was found that the composites showed no effective cure cycles, but presented good performance in the tensile test when compared with aluminum alloy 7050 T7451 . The results showed that the injection strategy was appropriate since the laminate exhibited a good quality for the proposed application

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Sintese e caracterização da resina fenol-furfurílica para a obtenção de carbono vítreo monolítico

The monolithic glassy carbon is a carbonaceous material, isotropic, non graphitizable obtained by means of carbonization of resins up to 1000 °C. The good physicochemical properties make this material applied in several areas such as aerospace, medicine, electronics, chemistry, among others. It has generally been processed from the use of phenolic and furfuryl alcohol resins. These resins have high crosslink density and high fixed carbon content and are therefore widely applied in aerospace. The combination phenol / furfuryl alcohol resins search for obtaining the most suitable process for the glass-like carbon processing with phenolic resins currently available and of lower cost and easier to synthesize than the furfuryl alcohol resin. The main objective of this work is to obtain a phenol-furfuryl resin with high fixed carbon content combined with low porosity of the material. Different synthesis routes have been adopted along with thermal analysis techniques, FTIR and image analysis. The resin obtained through partial synthesis process presented the characteristics sought in this work

Desenvolvimento de formulações multifuncionais líquido cristalinas contendo nanopartículas de dióxido de titânio e alfa-tocoferol

A destruição da camada de ozônio resulta em um preocupante aumento na incidência de radiação ultravioleta (UV) na superfície da Terra, radiação esta, responsável pela ocorrência de danos na pele e pelo aparecimento do câncer de pele, tipo mais comum de câncer. Assim, neste trabalho foram desenvolvidos sistemas líquido-cristalinos multifuncionais contendo nanopartículas de dióxido de titânio, cuja propriedade fotoprotetora é bem conhecida, e alfa-tocoferol, um composto com ação antioxidante. Com isso, pretendeu-se desenvolver uma formulação que atue como protetor solar inorgânico, bloqueando a radiação UV e impedindo sua penetração que pode causar sérios danos à pele, além de conter o alfa-tocoferol que interage com os radicais livres, diminuindo os danos causados por estes. Para tanto, inicialmente foram preparadas formulações baseadas em dois diagramas de fases, as amostras que apresentaram separação de fase foram excluídas do trabalho, e as outras foram submetidas à análise de microscopia de luz polarizadas. Através da microscopia de luz polarizada foi possível concluir que a estrutura líquido-cristalina é mantida com a incorporação dos ativos no sistema, o que posteriormente foi confirmado com a análise por SAXS. A análise do potencial zeta permitiu verificar que na faixa de pH entre 5 e 7, indicada para produtos de uso tópico, é possível evitar aglomeração das partículas, e com isso obter um visual transparente do produto. A avaliação do comportamento possibilitou concluir que todas as amostras apresentaram uma consistência ideal para aplicação do produto na pele

Cinética de degradação do sistema resina epóxi/fibra de carbono

With the increasing demand for electricity, the retraining of transmission lines is necessary despite environmental restrictions and crossings in densely populated areas to build new transmission and distribution lines. Solution is reuse the existent cables, replacing the old conductor cables for new cables with higher capacity power transmission, and control of sag installed. The increasing demand for electrical power has increased the electric current on the wires and therefore, it must bear out temperatures of 150°C or more, without the risk of the increasing sag beyond the established limits. In the case of long crossings or densely populated areas, sag is due to high weight of the cable on clearance. The cable type determines the weight, sag, height and the towers dimensions, which are the items that most influence the investment of the transmission line. Hence, to reduce both cost of investment and maintenance of the line, the use of a lighter cable can reduce both number and the height of the towers, with financial return on short and long term. Therefore, in order to increase the amount of transmitted energy and reduce the number of built towers and sag, is recommended in the current work substitute the current core material (steel or aluminium) for alternatives alloys or new materials, in this case a composite, which has low density, elevated stiffness (elasticity module), thus apply the pultruded carbon fiber with epoxy resin as matrix systems and perform the study of the kinetics of degradation by thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), according to their respective standards

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)