Heat pipes-concepts, materials and applications

The heat pipe is an innovative engineering structure characterized by its capacity to transfer large quantities of heat through relatively small cross-sectional areas with very small temperature differences; it also possesses high thermal conductance and low thermal impedance. In recent times, heat pipes in various forms and designs have found a wide variety of applications. This paper briefly presents the basic concepts of heat pipes, recent innovations in design and their applications.

Penetration Rate Effect on Miniature Cone Tip Resistance for Different Cohesionless Materials

Cone penetrometer tests were carried out in a 140 mm diameter triaxial chamber by using a miniature cone of diameter 19.5 mm. The rate of cone penetration was varied from 0.01 mm/s to 0.1 mm/s. Tests were performed in (i) clean sand, (ii) silty sand, and (iii) sand added with fly ash. Two different effective vertical pressures (sigma(nu)), 100 kPa and 300 kPa, were employed. It was noted that for clean and silty sand, the effect of penetration rate on the ultimate tip resistance (q(cu)) of the cone was found to remain only marginal. On the other hand, for sand added with 30% fly ash, the variation in q(cu) values with penetration rate was found to become quite significant. The effect of penetratio rate on q(cu) in all the cases was found to increase with a decrease in the rate of cone penetration. It was noted that with an increase in sigma(nu), the effect of penetration rate on q(cu) was found to become smaller. The effect of the cone penetration rate on q(cu) generally reduces with an increase in the relative density of the material.

Rate capability of graphite materials as negative electrodes in lithium-ion capacitors

The lithium-ion exchange rate capability of various commercial graphite materials are evaluated using galvanostatic charge/discharge cycling in a half-cell configuration over a wide range of C-rates (0.1 similar to 60C). The results confirm that graphite is capable of de-intercalating stored charge at high rates, but has a poor intercalating rate capability. Decreasing the graphite coating thickness leads to a limited rate performance improvement of the electrode. Reducing the graphite particle size shows enhanced C-rate capability but with increased irreversible capacity loss (ICL). It is demonstrated that the rate of intercalation of lithium-ions into the graphite is significantly limited compared with the corresponding rate of de-intercalation at high C-rates. For the successful utilisation of commercially available conventional graphite as a negative electrode in a lithium-ion capacitor (LIC), its intercalation rate capability needs to be improved or oversized to accommodate high charge rates.

A novel combustion process for the synthesis of fine particle α-alumina and related oxide materials

Synthesis of fine particle α-alumina and related oxide materials such as MgAl2O4, CaAl2O4, Y3Al5O12 (YAG), Image , β′-alumina, LaAlO3 and ruby powder (Image ) has been achieved at low temperatures (500°C) by the combustion of corresponding metal nitrate-urea mixtures. Solid combustion products have been identified by their characteristic X-ray diffraction patterns. The fine particle nature of α-alumina and related oxide materials has been investigated using SEM, TEM, particle size analysis and surface area measurements.

Preventive Dentistry and Dental Education in Iran

The present study investigated the preventive orientation of the dental education system in Iran as reflected in the responses of dental school educators and dental students to a questionnaire survey. Two questionnaires, one for dental school educators and one for senior dental students, were designed and piloted. Of the 15 state dental schools in Iran, 7 were selected using a multi-stage sampling approach, and all the dental school educators and senior dental students in these schools were asked to voluntarily fill in the anonymous questionnaires. Totally, 291 educators (80%) and 270 students (82%) participated in the study. In addition to background information, both questionnaires requested information on knowledge of caries prevention, attitudes towards preventive dentistry and oral health behaviour of the respondents. The students' questionnaire also covered items concerning prevention-oriented practice, study motives, and career preferences. Contrary to knowledge and attitudes of the students, those of the educators' were positively associated with some of their academic and personal background characteristics. Women were more likely to report favourable oral self-care habits than men. The other determinants of oral health behaviour were educators' familiarity with the oral public health field, and students' attitudes towards prevention. A higher score on preventive practice among the students was associated with better oral self-care habits and positive attitudes towards prevention. Characteristics of the profession and social status and security were the top-ranked that motivated students to study dentistry, and students mainly preferred to enter postgraduate courses and private practice after graduation. To increase the orientation of Iran's health care system towards prevention, and to cope with current concepts of prevention, corresponding changes should be made in the dental education system. The results of this study support the revision of the dental curriculum by placing more emphasis on prevention-related topics and by integrating prevention-related concepts into all disciplines. Additionally, practicing dentists and dental educators should be provided with opportunities to attend continuing education courses and to conduct seminars and congresses on various aspects of preventive dentistry at home as well as abroad.

Impact of dental insurance on adults’ oral health care in Tehran, Iran.

The aim of the present study was to determine relationships between insurance status and utilization of oral health care and its characteristics and to identify factors related to insured patients’ selection of dental clinic or dentist. The study was based on cross-sectional data obtained through phone interviews. The target population included adults in the city of Tehran. Using a two-stage stratified random technique, 3,200 seven-digit numbers resembling real phone numbers were drawn; when calling, 1,669 numbers were unavailable (busy, no answer, fax, line blocked). Of the 1,531 subjects who answered the phone call, 224 were outside the target age (under 18), and 221 refused to respond, leaving 1,086 subjects in the final sample. The interviews were carried out using a structured questionnaire and covered characteristics of dental visits, the respondent’s reason for selecting a particular dentist or clinic and demographic and socio-economic background (gender, age, level of education, income, and insurance status). Data analysis included the Chi-square test, ANOVA, and logistic regression and the corresponding odds ratios (OR). Of all the 1,086 respondents, 57% were women, 62% were under age 35, 46% had a medium and 34% a high level of education, 13% were under the poverty line, and 70% had insurance coverage; 64% with the public, and 6% with a commercial insurance. Having insurance coverage was more likely for women (OR=1.5), for those in the oldest age group (OR=2.0), and for those with a high level of education (OR=2.5). Of those with dental insurance, 54% reported having had a dental visit within the past 12 months ; more often by those with commercial insurance in comparison with public (65% vs. 53% p<0.001). Check-up as the reason for the most recent visit occurred most frequently among those with commercial insurance (28%) compared with those having public insurance (16%) or being non-insured (13%) (p<0.001). Having had two or more dental visits within the past 12 months was most common among insured respondents, when compared with the non-insured (31% vs. 22% p=0.01). The non-insured respondents reported tooth extractions almost twice as frequently as did the insured ones (p<0.001). Of the 726 insured subjects, 60% selected fully out-of-pocket-paid services (FOP), and 53% were unaware of their insurance benefits. Of those who selected FOP, good interpersonal aspects (OR=4.6), being unaware of dental insurance benefits (OR=4.6), and good technical aspects (OR=2.3) as a reason had greater odds of selecting FOP. The present study revealed that dental insurance was positively related to demand for oral health care as well as to utilization of services, but to the latter with a minor extent. Among insured respondents, despite their opportunity to use fully or highly subsidized oral health care services, good interpersonal relationship and high quality of services were the most important factors when an insured patient selected a dentist or a clinic. The present findings indicate a clear need to modify dental insurance systems in Iran to facilitate optimal use of oral health care services to maximize the oral health of the population. A special emphasis in the insurance schemes should be focused on preventive care.

Soft Functional Materials Induced by Fibrillar Networks of Small Molecular Photochromic Gelators

Low-molecular-mass organogelators (LMOGs) based on photochromic molecules aggregate in selected solvents to form gels through various spatio-temporal interactions. The factors that control the mode of aggregation of the chromophoric core in the LMOGs during gelation, gelation-induced changes in fluorescence, the formation of stacked superstructures of extended pi-conjugated systems, and so forth are discussed with selected examples. Possible ways of generating various light-harvesting assemblies are proposed, and some unresolved questions, future challenges, and their possible solutions on this topic are presented.

Quest for new materials: Inorganic chemistry plays a crucial role

There is an endless quest for new materials to meet the demands of advancing technology. Thus, we need new magnetic and metallic/semiconducting materials for spintronics, new low-loss dielectrics for telecommunication, new multi-ferroic materials that combine both ferroelectricity and ferromagnetism for memory devices, new piezoelectrics that do not contain lead, new lithium containing solids for application as cathode/anode/electrolyte in lithium batteries, hydrogen storage materials for mobile/transport applications and catalyst materials that can convert, for example, methane to higher hydrocarbons, and the list is endless! Fortunately for us, chemistry - inorganic chemistry in particular - plays a crucial role in this quest. Most of the functional materials mentioned above are inorganic non-molecular solids, while much of the conventional inorganic chemistry deals with isolated molecules or molecular solids. Even so, the basic concepts that we learn in inorganic chemistry, for example, acidity/basicity, oxidation/reduction (potentials), crystal field theory, low spin-high spin/inner sphere-outer sphere complexes, role of d-electrons in transition metal chemistry, electron-transfer reactions, coordination geometries around metal atoms, Jahn-Teller distortion, metal-metal bonds, cation-anion (metal-nonmetal) redox competition in the stabilization of oxidation states - all find crucial application in the design and synthesis of inorganic solids possessing technologically important properties. An attempt has been made here to illustrate the role of inorganic chemistry in this endeavour, drawing examples from the literature its well as from the research work of my group.

Restorative treatment practices and dentist-related factors

This study aimed at elucidating real-life aspects of restorative treatment practices. In addition, dentists' views and perceptions of and variation in restorative treatment practices with respect to dentist-related factors were evaluated. Reasons for placement and replacement of restoration, material selection, posterior restoration longevity, and the use of local anesthesia were assessed on two cross-sectional data sets. Data from the Helsinki Public Dental Service (PDS) included details on 3057 restorations performed by dentists (n=134) during routine clinical work in 2001. The other PDS data from Vantaa were based on 205 patient records of young adults containing information on 1969 restorations investigated retrospectively from 1994-1996 backwards; 51 dentists performed the restorations. In addition, dentists’ self-reported use of local anesthesia and estimates of restoration longevity were investigated by means of a nationwide questionnaire sent to 592 general dental practitioners selected by systematic sampling from the membership list of the Finnish Dental Association in 2004. All data sets included some background information on dentists such as gender, year of birth or graduation, and working sector. In PDS in 2001, primary caries was the reason for placement of restoration more often among patients aged under 19 years than among older patients (p<0.001). Among patients over 36 years of age, replacements represented the majority. Regarding dentist-related factors, replacements of restorations were made by younger dentists more frequently than by older dentists (p<0.001). In PDS in 1994-1996, the replacement rate of posterior restorations was greater among female dentists than among male dentists (p=0.01), especially for amalgams (p=0.008). The mean age of replaced posterior restoration among young adults was 8.9 (SD 5.2) years for amalgam and 2.4 (SD 1.4) years for tooth-colored restorations, the actual replacement rate for all existing posterior restorations being 7% in PDS in 1994-1996. Of all restorative materials used, a clear majority (69%) were composites in PDS in 2001. Local anesthesia was used in 48% of cases and more frequently for older patients (55%) than for patients aged under 13 years (35%) (p<0.001). Younger dentists more often used local anesthesia for primary restoration than did the older dentists (p<0.001), especially for primary teeth (p=0.005). Working sector had an impact on dentists’ self-reported use of local anesthesia and estimates of restoration longevity; public sector dentists reported using local anesthesia more frequently than private sector dentists for Class II (p=0.04) and for Class III restorations (p=0.01). Private sector dentists gave longer estimates of posterior composite longevity than public sector dentists (p=0.001). In conclusion, restorative treatment practices seem to vary according to patient age and also dentist-related factors. Replacements of restorations are common for adults. For children, clear underuse of local anesthesia prevails.

Dental health and school-based health education among 15-year-olds in Tehran, Iran

The aim of the present study was to assess dental health and its determinants among 15-year-olds in Tehran, Iran and to evaluate the impact of a school-based educational intervention on their oral cleanliness and gingival health. The total sample comprised 506 students. Data collection was performed through a clinical dental examination and a self-administered structured questionnaire. This questionnaire covered the student s background information, socio-economic status, self-perceived dental health, tooth-brushing, and smoking. The clinical dental examination covered caries experience, gingival status, dental plaque status, and orthodontic treatment needs. Participation was voluntary, and all students responded to the questionnaire. Only three students refused the clinical dental examination. The intervention was based on exposing students to dental health education through a leaflet and a videotape designed for the present study. The outcome examinations took place 12 weeks after the baseline among the three groups of the intervention trial (leaflet, videotape, and control). High participation rates at the baseline and scanty drop-outs (7%) in the intervention speak for reliability of the results. Mean value of the DMFT (D=decayed, M=missing, and F=filled teeth) index of the 15-year-olds was 2.1, which comprised DT=0.9, MT=0.2, and FT=1.0 with no gender differences. Dental plaque existed on at least one index tooth of all students, and healthy periodontium (Community Periodontal Index=0) was found in less than 10% of students. Need for caries treatment existed in 40% of students, for scaling in 24%, for oral hygiene instructions in all, and for orthodontic treatment in 26%. Students with the highest level of parents education had fewer dental caries (36% vs. 48%) and less dental plaque (77% vs. 88%). Of all students, 78% assessed their dental health as good or better. Even more of those with their DMFT=0 (73% vs. 27%) and DT=0 (68% vs. 32%) assessed their dental health as good or better. Smokers comprised 5% of the boys and 2% of the girls. Smoking was common among students of less-educated parents (6% vs. 3%). Of all students, 26% reported twice-daily tooth-brushing; girls (38% vs. 15%) and those of higher socio-economic background (33% vs. 17%) did so more frequently. The best predictors for a good level of oral cleanliness were female gender or twice-daily tooth-brushing. The present study demonstrated that a school-based educational intervention can be effective in the short term in improving the oral cleanliness and gingival health of adolescents. At least 50% reduction in numbers of teeth with dental plaque compared to baseline was achieved by 58% of the students in the leaflet group, by 37% in the videotape group, and by 10% of the controls. Corresponding figures for gingival bleeding were 72%, 64%, and 30%. For improving the oral cleanliness and gingival health of adolescents in countries such as Iran with a developing oral health system, school-based educational intervention should be established with focus on oral self-care and oral health education messages. Emphasizing the immediate gains from good oral hygiene, such as fresh breath, clean teeth, and attractive appearance should be key aspects for motivating these adolescents to learn and maintain good dental health, whilst in planning school-based dental health intervention, special attention should be given to boys and those with lower socio-economic status. Author s address: Reza Yazdani, Department of Oral Public Health, Institute of Dentistry, University of Helsinki, P.O. Box 41, FI-00014 Helsinki, Finland. E-mail: reza.yazdani@helsinki.fi

Development of cattle production extension materials for use in destination mark

To collate support and extension materials to ensure the recipients of Australian cattle have, at least, a minimum understanding of animal husbandry. As the number of destination markets increases, the need will also increase to produce similar material relevant and locally sensitive for these new markets.

Hybrid Materials Combining Photoactive 2,3-Didecyloxy Anthracene Physical Gels and Gold Nanoparticles

Organic/inorganic hybrid gels have been developed in order to control the three-dimensional structure of photoactive nanofibers and metallic nanoparticles (NPs). These materials are prepared by simultaneous self-assembly of the 2,3-didecyloxyanthracene (DDOA) gelator and of thiol-capped gold nanoparticles (AuNPs). TEM and fluorescence measurements show that alkane-thiol capped AuNPs are homogeneously dispersed and tightly attached to the thermoreversible fibrillar network formed by the organogelator in n-butanol or n-decanol. Rheology and thermal stability measurements reveal moreover that the mechanical and thermal stabilities of the DDOA organogels are not significantly altered and that they remain strong, viscoelastic materials. The hybrid materials display a variable absorbance in the visible range because of the AuNPs, whereas the strong luminescence of the DDOA nanofibers is efficiently quenched by micromolar amounts of AuNPs. Besides, we obtained hybrid aerogels using supercritical CO2. These arc very low-density porous materials showing fibrillar networks oil which fluorinated gold NPs arc dispersed. These hybrid materials are of high interest because of their tunable optical properties and are under investigation for efficient light scattering.