Sistema de monitoramento da temperatura e umidade em silos graneleiros via radiofrequencia

The use of Information and Communication Technology has grown in most agricultural activities. As a consequence, it has changed the way of thinking and acting of the farmer who wants to establish a more and more competitive market. However, the high costs of acquisition and maintenance of those technologies may be a factor which can inhibit its spread and acceptance, mainly to a large number of small grain Brazilian farmers. In this context, there is a need for innovative solutions that are proper for this universe of farmers. Starting from this premise, this paper presents the development of a low cost prototype to the monitoring process of temperature and humidity values of grains stored in silos, using communication based on wireless technology by radio frequency. Therefore, the economic implications of cost/benefit ratio of innovative application of wireless transmission in the process of thermometry of grains were analysed. The prototype was made of two electronic units, one of acquisition and another one of data reception, as well as computational software, which offered the farmer more precise information for the control of aeration. By means of stability, integrity and reliability tests of data transmission via radio, using low cost electronic components, the development system can be considered as potentially viable. It presented the difference regarding the wireless communication via radio in the process of grains thermometry, providing mobility, reducing cabling costs and maintenance, and also offering an easy system expansion; it was also appropriate to temperature and humidity monitoring in grain silos; and revealed operational viability, besides the low cost development when compared to similar products available in the Brazilian market.

Geoprocessamento aplicado na influencia do uso e ocupação do solo na temperatura aparente da superfície do município de Botucatu (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoramento do tempo de prensagem e do comportamento da temperatura através da espessura de painéis LVL (Laminated veneer lumber)

The aim of this study was to analyze the behavior of the flow of heat (temperature) through the thickness of panels LVL (Laminated veneer lumber) produced with phenol formaldehyde adhesive, in laboratorial and industrial scales. Experimental program was conducted with five LVL panels (three produced in laboratorial scale and two in industrial scale) with different arrangements of a mix of commercial veneers from tropical pinus from the south region of Sao Paulo State, Brazil, bonded using phenol formaldehyde adhesive. The temperature inside the panels during the pressing process was evaluated using thermocouples type T (cooper-constantan), installed mostly in the center of the glue lines and connected to a data acquisition system. The graphics of temperature as a function of the time showed a gradual increase of temperature up to pre-set values, remaining constant from them. The temperature reached at the center of the panels was adequate to promote the curing of the adhesive. These pre-set values were similar to the minimum values presented by other authors and manufacturers of these adhesives that affirm that temperatures above 100ºC at the center of laminated panels bonded with phenolic adhesives are sufficient to ensure proper cure of the resin. The time necessary for curing of the adhesives confirmed the validity of practical expressions provided by adhesive manufacturers.

Influência da temperatura no crescimento micelial de linhagens de Lentinula edodes

The objective of the present work was to evaluate the in vitro mycelial growth of ten L. edodes strains (LED 12, LED 20, LED 25, LED 27, LED 33, LED 35, LED 51, LED 55, LED 58 and LED 75) submitted to the temperatures of 15, 20 and 25 ºC. An agar medium prepared with eucalyptus wood extract and soy bran was used and radial measurement of the mycelial growth of L. edodes strains was performed. The experimental design was totally randomized, in a 10 x 3 factorial scheme. Each treatment corresponded to a Petri plate and consisted of 5 repetitions. It was verified that L. edodes growth is influenced by the incubation temperature, that is the temperature of 25 ºC was the most favorable for the mycelial growth of all L. edodes strains, especially for LE 75, LE 55, LE 33 and LE 12 strains, which obtained the highest mycelial growth averages at 25 ºC at the end of the cultivation cycle.

Produção semissólida de metarhizium anisopliae e beauveria bassiana em diferentes substratos e efeito da radiação ultravioleta e da temperatura sobre propágulos desses entomopatógenos

The present study was aimed to evaluate different (semi-solid) media for the production of Metarhizium anisopliae and Beauveria bassiana propagules, and to evaluate the tolerance of these propagules to ultraviolet radiation and temperature. The experiments were performed at the Biological Control Laboratory of the Instituto Biológico at Campinas, São Paulo, Brazil. For both fungi, 6 repetitions were performed for each of the 17 treatments: corn starch, full rice, parboiled rice, type-1 rice, type-2 rice, oat flakes, canjiquinha [grits], wheat flour, raw cassava flour, yellow corn flour, special wheat flour, corn flour, corn in grains, cassava starch, soy in grains, crushed wheat, and turf. The viability analysis was done in plastic plates containing BDA. For the bioassays involving exposure to ultraviolet light and temperature, BDA was also used for viability analysis, and each treatment was exposed to the UV radiation for 0, 25 and 50 seconds, the temperature exposure being at 20, 25, 30 and 35º C. Using a Potter tower, 2 mL of fungus suspension from each treatment was inoculated to the Diatraea saccharalis caterpillars. Regarding the sporulation, the largest concentrations of M. anisopliae and B. bassiana were found for the treatments with parboiled rice, type-1 rice, type-2 rice, yellow corn flour, corn flour and crushed wheat. The viability of all treatments was superior to 94.00%. Also, the longer the duration of the exposition to the UV, the smaller the number of fertile conidia. At 35o C, a significant loss of conidia viability was observed, and all the treatments presented some level of virulence.

Qualidade pós-colheita de abacates "hass" mantidos em temperatura ambiente e tratados com diferentes radiações

This study aimed the avocado ‘Hass’ conservation with the use of radiation. We performed two experiments: Experiment I – fruits irradiated with different doses of cobalt-60 gamma irradiation(0,0; 0,2; 0,4; 0,6 e 1,0 kGy); Experiment II – fruit irradiated by electron accelerator in different doses (0,0; 0,48; 0,8; 1,12 e 1,45 MeV), both maintained at room temperature of 21±1 °C and at relative humidity of 79±5 %. Antioxidant capacity, total phenolic compounds, fresh weight loss, and respiration rate evaluation were performed every three days for 12 days. The experimental design was completely randomized with three replicates per treatment. For statistical analysis, the Tukey test at 5% probability was employed. Under the conditions in which the experiments were performed, the results showed that the gamma radiation use retained the fruits for 12 days, regardless the doses applied. The radiation by electron accelerator use also promote the fruits preservation, regardless the doses employed.

Joia contemporânea: relações entre o adorno e o corpo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação das propriedades de transporte da fase ferroelétrica de Mott-Hubbard em condutores moleculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelos de Schwinger, Thirring e Kondo à temperatura finita: um estudo

Pós-graduação em Física - IFT

Ressonâncias planetárias spin-órbita com perturbação de terceiro corpo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Termofisiolofia da vespa Polybia (Trichothorax) ignobilis (Haliday, 1836) (Hymenoptera, Vespidae, Epiponini) durante a atividade de forrageamento

Many social wasps are known to use thermogenesis to warm up their flight muscles and are therefore able to forage under a broad range of ambient temperatures. However it is uncertain whether there exists a possible relation between ambient temperature and thermogenic capacity for tropical species, as we lack studies focusing on these species. Therefore, we examined the use of this mechanism in the neotropical Epiponini wasp Polybia ignobilis. More specifically, we used a thermographic camera to obtain data of the surface temperatures of three body regions (head, thorax and abdomen) of wasps during foraging activities (pre-flight, flight and post-flight) in cold [initial pe- riod of foraging activity: TAM : 15 − 20◦C] and warm [final period of foraging activity: TPM : 30 − 35◦C] conditions. Thorax temperature (Tth) was always higher than head (Th) and abdomen temperature (Tabd). In general, the lowest body temperatures were observed during the pre-flight period, while the highest values occurred upon the return of the wasps from the foraging flight. Except for the pre-flight period, Tth was always higher than Tabd, indicating that heat generated at the thorax was preferentially directed to the cephalic region. Therefore we confirmed the use of thermogenesis by a neotropical social wasp, although its magnitude was found modest compared to temperate species, which suggests a link between thermal environment and thermogenic capacity. We also showed that P. ignobilis modulates heat production as a function of ambient temperature (TA), maintaining a greater temperature difference (Tbody − TA) at cooler temperatures. Finally, we identified the cephalic region of wasps as an important route for the dissipation of the heat generated during flight

As características da temperatura do ar em bairros com produção do espaço urbano distintas: uma análise do Parque Higienópolis e Jd. Morada do Sol em Presidente Prudente-SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pulsar da Medusa: um experimento de criação cênica e estudo da expressividade do corpo-voz a partir dos fatores do movimento de Rudolf Laban

Pós-graduação em Artes - IA

Levantamento de nematoides entomopatogênicos em áreas agrícolas e influência da temperatura e do substrato na sobrevivência, multiplicação e armazenamento

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Termofisiolofia da vespa Polybia (Trichothorax) ignobilis (Haliday, 1836) (Hymenoptera, Vespidae, Epiponini) durante a atividade de forrageamento

Many social wasps are known to use thermogenesis to warm up their flight muscles and are therefore able to forage under a broad range of ambient temperatures. However it is uncertain whether there exists a possible relation between ambient temperature and thermogenic capacity for tropical species, as we lack studies focusing on these species. Therefore, we examined the use of this mechanism in the neotropical Epiponini wasp Polybia ignobilis. More specifically, we used a thermographic camera to obtain data of the surface temperatures of three body regions (head, thorax and abdomen) of wasps during foraging activities (pre-flight, flight and post-flight) in cold [initial pe- riod of foraging activity: TAM : 15 − 20◦C] and warm [final period of foraging activity: TPM : 30 − 35◦C] conditions. Thorax temperature (Tth) was always higher than head (Th) and abdomen temperature (Tabd). In general, the lowest body temperatures were observed during the pre-flight period, while the highest values occurred upon the return of the wasps from the foraging flight. Except for the pre-flight period, Tth was always higher than Tabd, indicating that heat generated at the thorax was preferentially directed to the cephalic region. Therefore we confirmed the use of thermogenesis by a neotropical social wasp, although its magnitude was found modest compared to temperate species, which suggests a link between thermal environment and thermogenic capacity. We also showed that P. ignobilis modulates heat production as a function of ambient temperature (TA), maintaining a greater temperature difference (Tbody − TA) at cooler temperatures. Finally, we identified the cephalic region of wasps as an important route for the dissipation of the heat generated during flight