Predation by Channa striatus (Bloch) on Rana tigrina (Daudin), Puntius gonionotus (Bleekeer) and Labeo rohita (Hamilton) in the laboratory

The growth performance of a predatory snakehead, Channa striatus was tested by supplying tadpoles of Rana tigrina and fingerlings of Puntius gonionotus and Labeo rohita as prey for a period of 21 days in aquaria. Prey consumption by C. striatus was significantly different (P<0.05) for different prey used (T1 - R. tigrina, T2 - P. gonionotus, T3 - L. rohita). Tadpoles of R. tigrina were preferred by the predator (C. striatus) over P. gonionotus and L. rohita although tadpole is nutritionally inferior to each of P. gonionotus and L. rohita. Each predator rayed on 50-330 mg per day per g of their body weight. Fish preyed on tadpoles also showed the highest growth. Significant difference in weight gain was found between T1 and T2 and also between T1 and T3 but no difference was found between T2 and T3. Food conversion ratio (FCR) was found to be lowest in treatment T3 followed by the treatments T2 and T1 respectively.

Pathogenicity of Aeromonas hydrophila artificially infected to Indian major carp (Cirrhinus mrigala Ham.)

Abrasion, feeding, injection and immersion methods were used to evaluate the pathogenicity of five different strains of Aeromonas hydrophila viz. RG (rui gill), ML (mrigal lesion), SG (sharpunti gill), F1K (mrigal kidney), GFL (gold fish lesion) and Ah-19 (Aeromonas hydrophila-19, Ref. Strain) against C. mrigala H. Bacterial suspension containing viable cells of 7.5x 10⁵ per ml was found to be very effective in intramuscular injection and feeding resulting 100% mortality after 96hr of inoculation. The strain RG, ML and F1K produced scale loss with erosion of the skin surface with/without hemorrhagic lesion after 48hr of inoculation following abrasion method. The strains SG and Ah-19 resulting scale loss with erosion of the skin surface with/without hemorrhagic lesion after 72hr of inoculation following abrasion and injection methods. SG and F1K caused reddening in mouth region after 72hr of feeding inoculation, whereas RG resulted frank ulcers from eroded dermal layer exposing underlying musculature which was hemorrhagic after 96hr of inoculation by abrasion method.

Effects of animal and plant protein diets on growth of Indian major carp (Labeo rohita Ham.) fingerlings

An experiment was conducted with Labeo rohita fingerlings in an indoor static fish rearing water system of glass made aquaria. Five experimental diets A, B, C, D and E were formulated containing 33% dietary protein level in five treatments each having two replicates containing 12 fingerlings of mean total initial weight of 13.00±0.2g. Sixty days of feeding trial in this experiment showed that fish fed on diet 'A' containing fish meal and diet 'E' containing mixed plant sources protein had significantly highest and lowest growth respectively. However, no significant difference of growth was found in fish fed on diets C and D containing meat and bone meal, and mix of animal protein source diets respectively. The result showed that the apparent protein digestibility (APD) of diets 'A' and 'E' had significantly best and least values respectively. Food conversion ratio (FCR) and protein efficiency ratio (PER) ranged between 1.37 to 2.17 and 1.38 to 2.18 respectively. On the basis of observed FCR and PER diets 'A' and 'E' produced significantly highest and lowest growth respectively.

Comparison of growth and conversion efficiency of the freshwater prawn Macrobrachium malcolmsonii (H. Milne Edwards) juveniles fed with formulated and commercial feeds

A nutritional study was carried out to know the feasibility of formulated and commercial feeds on the growth of juveniles of the freshwater prawn Macrobrachium malcolmsonii. Best relative growth rate was observed for feed 1 followed by feeds 2 and 3. Animals fed with feed 1 showed higher production than the other feeds. Higher assimilation efficiency was noticed in the animals provided with feeds 5 and 4. Higher gross and net growth efficiencies were observed in the animals offered feed 1. Among the commercial feeds, feed 3 may considered to be suitable alternative to feed 1.

The effect of feeding rate on the growth, food conversion and protein efficiency of silver dollar, Metynnis schreitmulleri (AHL), fry

A 30-day experiment was conducted to determine the effects of varying feeding rates on the growth of fry of silver dollar, Metynnis schreitmulleri (Ahl). Silver dollar fry with an average initial body weight of 1.100 ± 0.029 g were collected from a local fish breeder and fed a diet (35% protein and 6% fat) at the rate of 3, 6 and 9% of body weight per day in two equal meals. Per cent weight gain increased from 54.54 to 118.18 with increased feeding rates, which were significantly different (p<0.05) from each other. The highest specific growth rate was obtained in the fry fed at 9% body weight per day. In another study for 30 days, the effects of feeding frequency on growth, feed conversion and protein efficiency of silver dollar fry were evaluated. Groups of silver dollar fry with an initial individual weight of 0.700 ± 0.019 g were offered feed continuously for 24 hours during the day or night at different time intervals with varying meal sizes. The night time feeding with two meals gave the lowest weight and length gains (0.985 g and 0.30 cm). The growth rates of fish fed during day with three equal-sized meals are significantly (p<0.05) higher (4.66%) than the other treatments.

Optimization of semiconductor optical amplifiers for all optical wavelength conversion

In recent years a variety of experimental and theoretical work has been reported on the use of semiconductor optical amplifiers for high speed wavelength conversion. However little work has addressed the dynamic limitations of this conversion process in detail with a view to device optimization. In this paper, a detailed study of the conversion process is carried out in order to optimize device parameters and drive conditions for increased conversion speed and improved modulation index.

High-speed wavelength conversion utilizing birefringence in semiconductor optical amplifiers

This paper describes a novel technique whereby a mixture of cross-phase and cross-gain modulation effects in an SOA causes polarization rotation of a cw probe beam in the presence of a signal pulse, enabling the transmission of the probe through a polarizer to be controlled. The benefits of this approach are: 1) Very high extinction ratios present in the wavelength converted signal (>30 achieved); 2) A non-inverted wavelength converted signal, which is advantageous for chirp-compensation;2 3) A simple and stable experimental set-up, 4) Converted pulses which can be shaped to be faster than the input pulses.

Chirp limitation on high-speed wavelength conversion using semiconductor optical amplifiers

The cross-gain-saturation effect in SOAs, has been shown to enable robust high-speed wavelength conversion. Under strong electrical and optical pumping, conversion speeds in excess of 20 Gbit/s have been illustrated. However, the effect of chirp on transmission distance at such ultrahigh bit rates has not been studied theoretically in detail. This paper considers the chirp introduced on conversion, employing cross-gain saturation, and studies its dependence on amplifier drive current and signal power. It further shows how an increase in injected cw optical power can reduce chirp while improving conversion speed.

Demonstration of 2.488Gb/s simultaneous all-optical wavelength conversion and tone reading/replacing in an integrated-SOA/DFB laser

A technique is demonstrated that allows for the wavelength conversion of data with both simultaneous monitoring and replacing of a wavelength identifying pilot tone. The technique should be upgradable to data rates of 10Gb/s and higher.

Highly flexible all-optical wavelength conversion at 2.488 Gbits/s using a multi-output-wavelength laser

An integrated multiwavelength grating cavity (MGC) laser fabricated by selective area regrowth is demonstrated. In addition to allowing wavelength conversion, the device can perform various important network functions such as space switching and multiplexing. The use of the device for these functions offers several advantages from a wavelength division multiplexing (WDM) network, such as flexibility, reduced component count, size, and the associated cost reduction.

1 × 4 space switching and simultaneous all-optical wavelength conversion at 2.488Gbit/s using a single monolithically integrated multiwavelength laser

A novel InGaAs/InGaAsP/InP integrated multiwavelength grating cavity laser is presented, which has been used to demonstrate space switching and simultaneous all-optical wavelength conversion at bit rates of 2.488 Gbit/s. This has been achieved using a single monolithically integrated device without the need for post-filtering to separate the converted signal from the input.

Wavelength conversion, regeneration and tone manipulation using integrated semiconductor lasers and amplifiers

An integrated semiconductor optical amplifier/distributed feedback (SOA/DFB) laser that show promise as a simple all-optical wavelength conversion device together with useful simultaneous functions such as 2R regeneration and the ability to remove a wavelength identifying tone is presented. Wavelength conversion performance at 20Gb/s and 40Gb/s can be obtained with this laser.

All-optical 3R regeneration and format conversion in an integrated SOA/DFB laser

Using a compact, integrated device at 2.488Gb/s, simultaneous NRZ to RZ format conversion and regeneration was achieved. The regenerated signal has a negative BER sensitivity of -1.5dB compared with a data signal transmitted down 101km of standard fiber.

10-Gbits/s all-optical 3R regeneration and format conversion using a gain-switched DFB laser

A strain-compensated multiple quantum well device is used as a DFB laser, this has been optimized for low jitter gain switched operation at 10 GHz. The signal is transmitted down 80 km of standard fiber then amplified, filtered and polarization controlled before being injected into a DFB laser. The purpose of this regeneration process is to gain switch the DFB with the extracted clock signal in order to retime the converted signal. This process also simultaneously converts the input NRZ format to an output RZ data to format and results in a signal whose optical power and extinction ratio are considerably improved by the regeneration process.

Rule-based grapheme-to-phoneme method for the Greek

This paper describes a trainable method for generating letter to sound rules for the Greek language, for producing the pronunciation of out-of-vocabulary words. Several approaches have been adopted over the years for grapheme-to-phoneme conversion, such as hand-seeded rules, finite state transducers, neural networks, HMMs etc, nevertheless it has been proved that the most reliable method is a rule-based one. Our approach is based on a semi-automatically pre-transcribed lexicon, from which we derived rules for automatic transcription. The efficiency and robustness of our method are proved by experiments on out-of-vocabulary words which resulted in over than 98% accuracy on a word-base criterion.