A comparison of nitogen fate and transport in catchments underlain by high and low permeability aquifers using chemical and isotopic tools.

Variability in nitrogen fate and transport in different catchments types is often not considered. This research considers the importance of such nitrogen processes within groundwater pathways in two agricultural catchments in Ireland; a well drained catchment, underlain by karstified Carboniferous limestone, and a poorly drained catchment, underlain by Silurian greywacke. <br/>Depth specific low-flow groundwater sampling was used to evaluate the hydrochemical stratification in groundwater. Groundwater samples, as well as surface water samples, along river courses were analysed for nitrogen species (NO3, NH4 and NO2) and nitrate isotopes (d15N and d18O) as well as field parameters and major ions <br/>. <br/>The dominant nitrate (NO3) groundwater pathway in the poorly drained greywacke catchment is through the shallow weathered bedrock, as indicated by transmissivity values and the ionic and isotopic signatures, and a clear reduction in NO3 concentration is observed with depth. A similar chloride trend would suggest dilution is a major factor, however d15N and d18O isotopic values producing an enrichment ratio of 1.8 indicate that denitrification is also an important process involved in the fate of the NO3 within the groundwater flow system. This consistent trend with depth is in contrast to the stratification pattern observed in the karstified catchment. NO3 was not detected in the shallow groundwater pathway; the dominant groundwater pathway is in the deeper groundwater where there is little change in the nitrate isotope values with depth (d15N values range between 4.1 and 4.6 ���). This deeper groundwater contributes the dominant proportion of the river flow through a number of springs. As a result, the deeper groundwater, springs and river have a similar ionic signature and NO3 concentration range (23 �� 3 mg/l). Despite this pattern, the NO3 isotopes show a distinct difference in isotopic values between the deeper groundwater in the diffuse karst and the springs indicating some denitrification is occurring during groundwater discharge into the river. Furthermore the isotopes give an indication of the variability of the spatial extent of the springs and the complexities of the fissures through which they are fed. The results of this study clearly show the importance of the geology in the fate and transport of NO3 in agricultural catchments.

Pathways for delivery of surface water nutrients to receptors

Diffuse contaminants can make their way into rivers via a number of different pathways, including overland flow, interflow, and shallow and deep groundwater. Identification of the key pathway(s) delivering contaminants to a receptor is important for implementing effective water management strategies. The ���Pathways Project���, funded by the Irish Environmental Protection Agency, is developing a catchment management tool that will enable practitioners to identify the critical source areas for diffuse contaminants, and the key pathways of interest in assessing contaminant problems on a catchment and sub-catchment scale. <br/>One of the aims of the project is to quantify the flow and contaminant loadings being delivered to the stream via each of the main pathways. Chemical separation of stream event hydrographs is being used to supplement more traditional physical hydrograph separation methods. Distinct, stable chemical signatures are derived for each of the pathway end members, and the proportion of flow from each during a rainfall event can be determined using a simple mass balance approach. <br/>Event sampling was carried out in a test catchment underlain by poorly permeable soils and bedrock, which is predominantly used for grazing with a number of one-off rural residential houses. Results show that artificial field drainage, which includes subterranean land drains and collector drains around the perimeters of the 1 to 10 ha fields, plays an important role in the delivery of flow and nutrients to the streams in these types of hydrogeological settings. <br/>Nitrate infiltrates with recharge and is delivered to the stream primarily via the artificial drains and the shallow groundwater pathway. Longitudinal stream profiles show that the nitrate load input is relatively uniform over the 8 km length of the stream at high flows, suggesting widespread diffuse contaminant input. In contrast, phosphorus is adsorbed in the clay-rich soil and is transported mainly via the overland flow pathway and the artificial drains. Longitudinal stream profiles for phosphorus suggest a pattern of more discrete points of phosphorus inputs, which may be related to point sources of contamination. <br/>These techniques have application elsewhere within a toolkit of methods for determining the key pathways delivering contaminants to surface water receptors.

After the Aznalc��llar mine spill:arsenic, zinc, selenium, lead and copper levels in the livers and bones of five waterfowl species

In April 1998, a holding lagoon containing pyrite ore processing waste, failed and released 5-6 million m3 of highly polluting sludge and acidic water. Over 2650 ha of the internationally important Do��ana Natural Park became contaminated, along with &lt;100 ha of the more pristine Do��ana National Park. In order to assess the affect of the spill on waterfowl from Do��ana, bone and liver samples from 124 individuals have been analysed for As, Pb, Cu, Zn and Se. Five species have been studied, from the Rallidae (rails), Anatini (dabbling ducks) and Aythyini (pochards) families. Geometric mean bone concentrations 2-3 months after the spill were in the order of Zn &gt; Cu &gt; Pb &gt; Se &gt; As, while liver concentrations were in the order of Zn &gt; Cu &gt; Se &gt; Pb &gt; As. Dry weight bone concentrations ranged from n.d-1.76 mg kg(-1) As, 109.4-247.6 mg kg(-1) Zn, 0.06-1.27 mg kg(-1) Se, n.d-134.11 mg kg(-1) Pb, and 2.18-8.92 mg kg(-1) Cu. Wet weight liver concentrations ranged from n.d-0.34 mg kg(-1) As, 29.8-220.1 mg kg(-1) Zn, 0.15-0.85 mg kg(-1) Se, n.d-3.80 mg kg(-1) Pb, and 7.30-742.96 mg kg(-1) Cu. The most important factor related to the accumulation of these metals was commonly species; however, location and sex also had important effects on liver As levels, location and age affected Cu levels, while Zn and Pb were affected by age, sex and location. Birds from Natural Park areas were found to have significantly higher levels of bone Zn, Pb and Cu, and liver As and Cu than birds from National Park areas. Female birds had higher liver As, Zn and Pb than males; whilst adults appeared to have lower bone As and Zn but higher liver Pb than chicks/juveniles. Although metal concentrations were elevated in certain individuals, in the majority of birds studied, they did not reach levels widely considered to be toxic. However, it would appear that As and Cu liver levels (which may be indicative of short-medium term pollutant exposure) were elevated in waterbirds which died in the spill contaminated Natural Park, 2-3 months after the disaster.

Improving the Fuel Economy of a Tuned 600cc FSAE Engine

To maintain its relevance, motorsport cannot be exempt from<br/>the trend of increasing fuel economy. This bears obvious<br/>competitive benefits as well, either in decreasing the<br/>frequency of pit stops or the mass of fuel carried. Given the<br/>increased points weighting of fuel economy for the Formula<br/>Student (FS) competition, a complete analysis was performed<br/>on the Queen's Formula Racing 600cc motorcycle engine in<br/>preparation for the 2011 competition.<br/>The criteria for such high performance fuel economy differ to<br/>a degree from most mass transportation counterparts and were<br/>divided into three distinct regimes; full load, part load and no<br/>load conditions.<br/>Full load positions naturally demand maximum torque for<br/>performance but that does not imply that fuel savings cannot<br/>be made whilst preserving this. The point at which maximum<br/>torque is produced with minimum air -fuel ratio, Leanest<br/>mixture for Best Torque (LBT), was therefore sought and<br/>mapped for full load.<br/>At part load, torque is less of a concern, and maintaining a<br/>sustainable engine temperature and transient response become<br/>more important. With decreasing AFR, engine temperatures<br/>can rise dramatically so temperatures were measured close to<br/>the exhaust port for a wide range of air-fuel ratios.<br/>Competition track data was analysed to highlight key part load<br/>operating regions and these were mapped according to<br/>measured safe temperature limits. Torque response to a step<br/>throttle change was also measured to ensure suitable engine<br/>transient performance was maintained.<br/>At no load conditions, with low engine speed only idle<br/>conditions need to be satisfied. In the situation where the<br/>engine is still at high speed without load, the engine is being<br/>motored and no fuel is required. An overrun fuel cut was<br/>employed to reflect this giving significant fuel savings. The<br/>effect on torque and engine pickup was measured.<br/>Modifications were also made to the fuel injector location to<br/>improve fuel mixing and evaporation at this lower air flow<br/>condition.<br/>These mapping regimes were implemented and tested using<br/>fully transient lap simulations using competition track data<br/>and a four quadrant AC engine dynamometer. The experiment<br/>indicated a reduction in fuel consumption for 22 laps of the FS<br/>track from 5.08litres to 3.67litres, around 27% in total. The<br/>actual fuel used at the 2011 competition was 3.6 litres while<br/>placing 8th in the endurance event, further validating the<br/>benefits of these mapping regimes.

A Framework for Context-Driven End-to-End QoS Control in Converged Next Generation Networks���

This paper presents a framework for context-driven policy-based QoS control and end-to-end resource management in converged next generation networks. The Converged Networks QoS Framework (CNQF) is being developed within the IU-ATC project, and comprises distributed functional entities whose instances co-ordinate the converged network infrastructure to facilitate scalable and efficient end-to-end QoS management. The CNQF design leverages aspects of TISPAN, IETF and 3GPP policy-based management architectures whilst also introducing important innovative extensions to support context-aware QoS control in converged networks. The framework architecture is presented and its functionalities and operation in specific application scenarios are described.

Buffer Management for Multimedia QoS control over HSDPA Downlink

HSDPA specifications include support for a flexible framework for QoS management. In this paper, it is shown how buffer management could be incorporated into HSDPA QoS framework for 'multimedia' traffic QoS control in the MAC-hs of the Node-B. A time-space-priority (TSP) scheme is proposed as viable buffer management scheme to this effect. Comparative simulation study with other schemes is presented, demonstrating the effectiveness of the TSP buffer management scheme for 'multimedia' service QoS control in HSDPA Node-B data buffers

Novel comparison of kinetic models for the adsorption-coupled reduction of Cr(VI) using untreated date pit biomaterial

Biosorption of Cr(VI) onto date pit biomass has been investigated via kinetic studies as functions of initial Cr(VI) concentration, solution temperature and date pit particle size. Kinetic experiments indicated that chromate ions accumulate onto the date pits and then reduce to less toxic Cr(III) compounds. The L��pez-Garc��a, Escudero and Park Cr(VI) biosorption kinetic models, which take into consideration the direct reduction, the passivation process and the follow-on decrease of the active surface area of reaction, were applied to the kinetic data. The models represented the experimental data accurately at low Cr(VI) concentration (0.480 mM) and small particle size (0.11���0.22 mm) at which the Cr(VI) was completely removed from the aqueous solution and completely reduced to Cr(III) after 420 min. Date pit biomass thus offers a green chemical process for the remediation of chromium from wastewater. This investigation will help researchers employ the adsorption-coupled reduction of Cr(VI) models and simplify their application to kinetic experimental data.

Detailed validation of an automotive catalysis model using spatially resolved measurements within the catalyst substrate

Many kinetic models have appeared in literature in past decades using two main approaches: the traditional global kinetics approach, or the more complex micro-kinetics approach. Whether global or micro-kinetics, kinetic models have been based on experimental data obtained at the end of the monolith. The experimental procedure using end pipe analysis may give an accurate overview of the reaction mechanisms that occur; however, the lack of information from within the catalyst can ultimately lead to inaccuracies in the kinetic model and parameters used.<br/><br/>Using SpaciMS, a spatially resolved experimental technique developed at the Queen's University Belfast, information from within the catalyst can be obtained. This minimally invasive technique provides detailed information of the gas concentration and temperature profile from inside the catalytic monolith. This paper presents a kinetic model and simulations validated against experimental data obtained from three positions inside the catalyst monolith at 2, 14, and 26���mm���in, using data from the SpaciMS. Also, simulations of end pipe analysis, using a commercial reactor, for the CO oxidation are presented and analyzed. The simulations presented are for varying concentrations of both CO and O2 (0.5���% and 1���% CO, 0.5���% and 2���% O2) for both the global and micro-kinetic approach.

Mutational Analysis of the Rhodopsin Gene in Sector Retinitis Pigmentosa

<p>Background: To determine the role of rhodopsin (RHO) gene mutations in patients with sector retinitis pigmentosa (RP) from Northern Ireland. </p><p>Design: A case series of sector RP in a tertiary ocular genetics clinic. </p><p>Participants: Four patients with sector RP were recruited from the Royal Victoria Hospital (Belfast, Northern Ireland) and Altnagelvin Hospital (Londonderry, Northern Ireland) following informed consent. </p><p>Methods: The diagnosis of sector RP was based on clinical examination, International Society for Clinical Electrophysiology of Vision (ISCEV) standard electrophysiology, and visual field analysis. DNA was extracted from peripheral blood leucocytes and the coding regions and adjacent flanking intronic sequences of the RHO gene were polymerase chain reaction (PCR) amplified and cycle sequenced. </p><p>Main Outcome Measure: Rhodopsin mutational status. </p><p>Results: A heterozygous missense mutation in RHO (c.173C���&gt;���T) resulting in a non-conservative substitution of threonine to methionine (p. Thr58Met) was identified in one patient and was absent from 360 control individuals. This non-conservative substitution (p.Thr58Met) replaces a highly evolutionary conserved polar hydrophilic threonine residue with a non-polar hydrophobic methionine residue at position 58 near the cytoplasmic border of helix A of RHO. </p><p>Conclusions: The study identified a RHO gene mutation (p.Thr58Met) not previously reported in RP in a patient with sector RP. These findings outline the phenotypic variability associated with RHO mutations. It has been proposed that the regional effects of RHO mutations are likely to result from interplay between mutant alleles and other genetic, epigenetic and environmental factors.</p>

The TARANIS laser : A multi-terawatt system for laser plasma physics

<p>The Terawatt Apparatus for Relativistic And Non-linear Interdisciplinary Science (TARANIS), installed in the Centre for Plasma Physics at the Queen's University Belfast, supports a wide ranging science program, including laser-driven particle acceleration, X-ray lasers and high energy density physics experiments. We present (1) an overview of the laser facility, (2) results of preliminary investigations on proton acceleration, laser action at 13.9 nm and K�� sources and (3) speculation on future experiments using these extreme sources.</p>

Studies into the effect of temperature on the impact of model particles in co-melt granulation

<p>In co-melt granulation, collisions occur between the particles to be agglomerated and the binder material. Depending on the stage of granulation, the binder material can be in the solid or liquid phase. The outcome of these collisions controls the dynamics of the granulation process and the fundamental physics of the impacts are of interest. This paper examines the impact of glass beads (model particles) and solid Poly Ethylene Glycol (PEG) flakes on a substrate of PEG as the temperature of the PEG layer is increased from below its melting point to above it. While the layer is in the solid state, the result of the impact can be quantified by the coefficient of restitution. When the layer is in the liquid state, the impact can be quantified by the immersion behaviour. The results obtained show that the coefficient of restitution between either glass beads and PEG flakes and the PEG layer is strongly affected by temperatures. As the PEG layer approaches its melting point, the coefficient of restitution falls to zero. Once the temperature of the PEG layer exceeds the melting point, the impact is characterised by a transient maximum indentation and then rebound to an equilibrium position. These too are strongly dependent on temperature.</p>

On-line diagnostics of transformer winding insulation failures, by Park`s vector approach

This paper presents a non-invasive approach for diagnosing winding insulation failures in three-phase transformers, which is based on the on-line monitoring of the primary and secondary current Park's Vector. Experimental and simulated results demonstrate the effectiveness of the proposed technique, for detecting winding inter-turn insulation faults in operating three-phase transformers.

Transformers on-load exciting current Park`s vector approach as a tool for winding faults diagnostics

This paper presents the development of a new approach for diagnosing the occurrence of inter-turn short-circuits in the windings of three-phase transformers, which is based on the on-line monitoring of the on-load exciting current Park's Vector patterns. Experimental and simulated results demonstrate the effectiveness of the proposed technique for detecting winding inter-turn insulation faults in operating three-phase transformers.