Notice des objets exposés dans la section de géographie : exposition, Paris, Bibliothèque nationale, mai 1889 / [par Gabriel Marcel]

[Exposition. Paris, Bibliothèque nationale. 1889]

Epidote in hydrous mafic magmas : near solidus phase relations in the lower crust

Crystallisation of hydrous mafic magmas at high pressure is a subject of numerous petrologic and experimental studies since the last century and is mainly related to the process of continental crust formation and the possible link between mantle derived melts and low pressure granitoids. Albeit the sequence of crystallization is well constrained by experimental studies, the origin of exposed lower crustal rocks exposed on the earth surface is controversial. Ones line of argument is favouring high pressure crystallization of dry or wet mafic magmas, whereas others invoke partial melting of pre-existing crust. Therefore studies involving field, textural and chemical observations of exposed lower crust such as in Kohistan (Pakistan) or Talkeetna (Alaska) are crucial to understand the continental crust formation processes via arc magmatism. Epidote-bearing gabbros are very sparse and always associated with the deep part of continental crust (>30 km) as in the Kohistan Arc Complex (Pakistan) or in the Chelan Complex (western U.S.). Magmatic epidote is restricted to a small temperature interval above the water-saturated solidus of MORB and represent the last crystallizing liquids in lower crustal regions. However, epidote and melt stability at lower crustal pressures are not clearly established.¦The Chelan complex (western U.S.) at the base of the Cascadian Arc is composed mainly by peraluminous tonalité associated with gabbroic and ultramafic rocks and was traditionally interpreted as a migmatitic terrain. However field, chemical and mineralogical observations rather suggest a magmatic origin and point to a protracted crystallization at intermediate to high pressure ~ 1.0 GPa dominated by amphibole fractionation and followed by isobaric cooling down to 650°C. Crystal fractionation modelling using whole rock composition and field constraints is able to generate peraluminous tonalité. The modelled crystallisation sequence and the volume proportions are in agreement with experimental studies performed at these pressures. The Chelan complex was thus not formed during a partial melting event, but represent the sequence of crystallisation occurring at the base of the crust. Massive fractionation of hornblende is able to generate peraluminous tonalité without significant assimilation of crustal rock.¦Similarly to the Chelan complex, the base of the Kohistan arc is composed of cumulates derived by high pressure crystallization of hydrous magma. In garnet gabbros, epidote occurs as magmatic phase, crystallising from hydrous interstitial melt trapped between grain boundaries at lower crustal pressures (Ρ ~ 1.2 GPa) for temperature of (650-700 °C). Trace and REE signature in epidote indicate that epidote was formed through peritectic reaction involving garnet, clinopyroxene and plagioclase. At the beginning of the crystallisation epidote signature is dominated by REE content in the melt, whereas at the end the signature is dominated by reacting phases. Melt in equilibrium with epidote inferred from the partition coefficients available is similar to intrusive tonalité up the section indicating that hydrous melt was extracted from the garnet gabbros. In some gabbros epidote shows single homogeneous compositions, while in others coexisting epidote have different compositions indicating the presence of solvi along the Al-Fe3+ join. The overgowths are only observed in presence of paragonite in the assemblage, suggesting high water content. At high water content, the hydrous solidus is shift to lower temperature and probably intersects the solvi observed along the Al-Fe3+ join. Therefore, several compositions of epidote is stable at high water content.¦-¦La composition chimique de la croûte continentale est considérée comme similaire à celle du magmatisme calco-alcalin de marge continentale active (enrichissement en éléments mobiles dans les fluides, anomalies négatives en Nb, Ta et éléments à haut potentiel électronique, etc...). Cependant la nature andésitique de la croûte continentale (Si02 > 60 wt%), résultant des nombreuses intrusions de granitoïdes dans la croûte supérieure, est sujette à polémique et le lien entre les magmas dérivés du manteau et les roches évoluées de faible profondeur n'est pas clairement établi (fusion partielle de croûte basaltique, cristallisation fractionnée à haute pression, etc...).¦Les affleurements de croûte profonde sont rares mais précieux, car ils permettent d'observer les phénomènes se passant à grande profondeur. Le complexe de Chelan (Washington Cascades) en est un exemple. Formé à environ 30 km de profondeur, il est composé de roches gabbroïques et ultramafiques, ainsi que de tonalités, qui furent souvent interprétés comme le produit de la fusion partielle de la croûte. Cependant, les relations de terrain, la chimie des éléments majeurs et des éléments traces sont cohérentes avec l'évolution d'un complexe magmatique mafique dans la croûte profonde ou moyenne ( 1.0 GPa), dominée par le fractionnement de l'amphibole. Après son emplacement, le complexe a subi un refroidissement isobare jusqu'à des températures de l'ordre de 650 °C, déduit de la composition chimique des minéraux. Un bilan de masse contraint pax les observations de terrain permet de calculer la séquence et les volumes de fractionnement. Les faciès évolués légèrement hyperalumineux observés sur le terrain peuvent être générés par la cristallisation de 3 % de websterite à olivine, 12 % d'hornblendite à pyroxène 33 % d'hornblendite, 19 % de gabbros, 15 % de diorite et 2 % de tonalité. Nous montrons ainsi qu'une série de fractionnement contrôlée par l'amphibole permet de générer des tonalités sans assimilation de matériel crustal et l'exemple de Chelan illustre la viabilité de ce processus dans la formation de croûte continentale.¦Les réactions proches du solidus saturé en H20 dans les systèmes basaltiques à des pressions élevées restent énigmatiques. Diverses expériences tendent à montrer que l'épidote est stable dans ces conditions, mais rarement observée (décrite ?) comme phase primaire dans les systèmes naturels. Les épidotes trouvées dans les gabbros de Jijal (nord-Pakistan) montrent des textures de type .magmatique telles qu'observées dans les roches évoluées. Le contenu en terres rares de ces épidotes est très variable allant de signatures enrichies en terres rares légères impliquant la présence de liquide interstitiel à des signatures complètement déprimées en ces mêmes éléments, évoquant une cristallisation en coexistence avec du grenat. Ces diverses signatures reflètent un chemin de cristallisation en présence de liquide interstitiel et enregistrent des réactions péritectiques impliquant grenat, clinopyroxene et plagioclase à des pressions de ~ 1.2 GPa pour des températures de 650-700 °C. Cependant dans quelques échantillons deux ou trois compositions d'épidotes coexistent démontrant la présence de lacunes d'immiscibilité le long de la solution solide épidote-clinozoïsite. La forte teneur en H20 du liquide magmatique est certainement à l'origine de la coexistence de deux compositions distinctes.

Adresse de la section des Lombards à l'Assemblée nationale, prononcée par P. M. Joly à la séance du... 8 septembre 1792...

[Acte. 1792-09-08]

Four-corner bone arthrodesis with dorsal rectangular plate: series and personal technique.

Controversy exists about the best method to achieve bone fusion in four-corner arthrodesis. Thirty-five patients who underwent this procedure by our technique were included in the study. Surgical indications were stage II-III SLAC wrist, stage II SNAC wrist and severe traumatic midcarpal joint injury. Mean follow-up was 4.6 years. Mean active flexion and extension were 34 degrees and 30 degrees respectively; grip strength recovery was 79%. Radiological consolidation was achieved in all cases. The mean DASH score was 23 and the postoperative pain improvement by visual analogue scale was statistically significant. Return to work was possible at 4 months for the average patient. Complications were a capitate fracture in one patient and the need for hardware removal in four cases. Four-corner bone wrist arthrodesis by dorsal rectangular plating achieves an acceptable preservation of range of motion with good pain relief, an excellent consolidation rate and minimal complications.

Kuivatuksen hallintaparametrien vaikutus sellun paperiteknisiin ominaisuuksiin

Sellun kuivatuksesta ei löydy paljoa tutkimustietoa. Työn tarkoituksena on antaa lyhyt teoriakuvaus sellun kuivatuksesta, kuivatukseen vaikuttavista tekijöistä jasellun kuivatuksen vaikutuksesta sellun laatuun. Käytännön osassa tutkittiin kuivauskoneen poikkiradan hienoainepitoisuuden ja vetolujuussuhteiden vaihtelua, suihkusuhteiden, kenkäpuristimen viivakuorman sekä paalipuristimen puristusvoimanvaikutusta sellun paperiteknisiin ominaisuuksiin. Sellun kuivauskone koostuu perälaatikosta, viiraosasta, puristinosasta sekä kuivausosasta.Perälaatikon tehtävä on syöttää massa tasaisesti viiraosalle. Viiraosalla poistuu suurin osa vedestä (noin 94 %) ja viiraosalla tapahtuu pohjan muodostus. Tässä työssä tutkittu suihkusuhde on yksi rainan muodostukseen vaikuttava tekijä. Puristinosalla voidaan sellun ominaisuuksiin vaikuttaa puristuksen voimalla ja kestolla ja tätä työssä tutkittiin kenkäpuristimen viivakuormaa muuttamalla. Varsinainen kuivatus voi tapahtua joko kuumia sylinteripintoja tai ilmaa hyödyntäen. Kuivauskoneen jälkeen on leikkuri, paalauspöytä ja paalipuristin. Paalipuristuksen vaikutusta sellun ominaisuuksiin tutkittiin keventämällä paalipuristusta nykyisestä.

Fatigue Analysis of Welded Cruciform Joints with Cold Laps

Työssä on tutkittu vetojännityskuormituksen alaisena olevien hitsattujen kuormaa kantamattomien X-liitosten hitsin paikallisen geometrian variaation vaikutusta väsymislujuuteen. Muuttujina olivat reunan pyöristyssäde, kylmäjuoksun suuruus ja kylkikulma. Geometristen muuttujien parametrinen riippuvuussuhde on analysoitu usealla elementtimallilla. Väsymistarkastelu on suoritettu käyttämällä lineaaris-elastista murtumismekaniikkaa (LEFM) tasovenymätilassa ja materiaalina terästä. Särönkasvun suunnan ennustamisessaon käytetty maksimipääjännityskriteeriä sekä jännitysintensiteettikertoimet on määritetty J-integraalilla. Särön ydintymisvaihetta ei ole otettu huomioon. Rakenteen on oletettu olevan hitsatussa tilassa ja jännitysheilahdus on kokonaan tehollinen. Särön kasvunopeuden ennustamiseen on käytetty Paris'n lakia. Väsymislujuustulokset on esitetty karakteristisina väsymisluokkina (FAT) ja sovitettu parametriseksi yhtälöksi. Lopuksi väsymisanalyysin ennustamia tuloksia on verrattu saatavilla oleviin väsytystestituloksiin.

Levylämmönsiirtimen mitoitus ja optimointi erityisesti lämpöpumpuissa

Työn tavoitteena on laatia käsikirjamainen läpileikkaus levylämmönsiirtimen rakenteesta ja käytöstä lämpöpumppulaitteistoissa. Kylmäprosessin tarkastelun lisäksi on eri lähteistä haettu yhtälöitä lämmönsiirron ja painehäviönlaskentaan. Lähdeaineistona on käytetty lämmönsiirron oppikirjoja, joiden lisäksi on käyty läpi suuri joukko tieteellisen tutkimuksen julkaisemia tutkimusraportteja levylämmönsiirtimen mitoituksesta erilaisissa käyttökohteissa. Oppikirjoissa ei ole esitetty varsinaisesti levylämmönsiirtimen laskentamenetelmiä, vaan niissä esitetään lämmönsiirron perusyhtälöt. Varsinainen lämmönsiirtolevyprofiilin laskentaan perustuva lähdeaineisto on löytynyt lämmönsiirtoon erikoistuneista julkaisuista. Lämmönsiirto tapahtuu aina kuumemmasta kylmempään tilaan. Lämmönsiirto eri virtausaineiden välillä toteutetaan lämmönsiirtimien avulla. Lämmönsiirrintyyppejä on olemassa lukuisia, joista yksi yleisesti käytetty tyyppi on levylämmönsiirrin. Tässä konstruktiossa on mahdutettu paljon lämmönsiirtopintaa ulkomitoiltaan pieneen tilaan. Tämä siirrintyyppi on eduksi silloin, kun virtaavat aineet ovat puhtaita ja niillä ei ole likaavaa vaikutusta lämmönsiirtopinnoille. Lämpöpumpulla tarkoitetaan laitetta, jolla voidaan käyttää hyödyksi lämmönlähteen matalaa lämpötilatasoa nostamalla lämpötilatasoa kompressorin puristustyön avulla korkeampaan lämpötilatasoon. Lämpöpumppulaitteiston toiminta perustuu kylmäprosessin toimintaan. Kylmäprosessin läpikäynti auttaa lukijaa hahmottamaan, millainen prosessi on kysymyksessä ja mitä komponentteja liittyy kylmäprosessiin. Tässä diplomityössä esitetyt yhtälöt antavat suuntaa, millä tavalla levylämmönsiirtimien ominaisuuksia voidaan laskea ja mitkä tekijät vaikuttavat siirtimien mitoittamiseen. Tarkemmat vaihdinkohtaiset laskentakorrelaatiot muotoutuvat vasta sitten, kun valmis tuote on testattu laboratorio-olosuhteissa ja siitä on saatu lämpötila-, virtaus- ja painesuhteet selville. Tämän jälkeen voidaan mittaustuloksiin perustuen rakentaa matemaattinen malli, jolla laskennallisesti määritelläänvaihtimien ominaisuudet. Lisäksi on esitetty yleisiä tapoja, joilla voidaan määritellä lämmönsiirtimien lämpöpintoja.

Asiakkuusarvojohtaminen ja sitä tukeva asiak-kuusraportointi - Case Neste Markkinointi Oy

Tutkielman tavoitteena on analysoida, miten asiakkuuksien arvoa voidaan johtaa ja miten asiakkuusarvojohtamista voidaan tukea asiakkuusraportoinnin avulla. Teoriaosuudessa analysoidaan asiakaskannattavuuden muodostumista, sekä asiakkuusarvojohtamiseen liittyvää asiakkuusstrategiaa ja raportointiin liittyvää asiakastiedon hallintaa. Empiirinen aineisto pohjautuu case-yrityksen asiakkuusprojektiin, jonka tarkoituksena on tunnistaa erilaiset asiakkuudet ja kehittää niitä siten, että kannattavuus paranisi asiakkaan prosessin ymmärtämisen ja tukemisen kautta. Asiakkuus-raportointi on tärkeä seurannan väline asiakkuusarvojohtamisessa ja se vaatii raportoinnilta luotettavuutta, henkilöstön hyväksyntää käytettävistä kannattavuuslaskentamenetelmistä sekä suhteellisten muutosten ja trendien esittämistä, jotta muutokseen voitaisiin reagoida nopeasti.

Development of a hepatocyte hollow fiber bioreactor for the study of contrast agents by magnetic resonance imaging

Thanks to the continuous progress made in recent years, medical imaging has become an important tool in the diagnosis of various pathologies. In particular, magnetic resonance imaging (MRI) permits to obtain images with a remarkably high resolution without the use of ionizing radiation and is consequently widely applied for a broad range of conditions in all parts of the body. Contrast agents are used in MRI to improve tissue discrimination. Different categories of contrast agents are clinically available, the most widely used being gadolinium chelates. One can distinguish between extracellular gadolinium chelates such as Gd-DTPA, and hepatobiliary gadolinium chelates such as Gd-BOPTA. The latter are able to enter hepatocytes from where they are partially excreted into the bile to an extent dependent on the contrast agent and animal species. Due to this property, hepatobiliary contrast agents are particularly interesting for the MRI of the liver. Actually, a change in signal intensity can result from a change in transport functions signaling the presence of impaired hepatocytes, e.g. in the case of focal (like cancer) or diffuse (like cirrhosis) liver diseases. Although the excretion mechanism into the bile is well known, the uptake mechanisms of hepatobiliary contrast agents into hepatocytes are still not completely understood and several hypotheses have been proposed. As a good knowledge of these transport mechanisms is required to allow an efficient diagnosis by MRI of the functional state of the liver, more fundamental research is needed and an efficient MRI compatible in vitro model would be an asset. So far, most data concerning these transport mechanisms have been obtained by MRI with in vivo models or by a method of detection other than MRI with cellular or sub-cellular models. Actually, no in vitro model is currently available for the study and quantification of contrast agents by MRI notably because high cellular densities are needed to allow detection, and no metallic devices can be used inside the magnet room, which is incompatible with most tissue or cell cultures that require controlled temperature and oxygenation. The aim of this thesis is thus to develop an MRI compatible in vitro cellular model to study the transport of hepatobiliary contrast agents, in particular Gd-BOPTA, into hepatocytes directly by MRI. A better understanding of this transport and especially of its modification in case of hepatic disorder could permit in a second step to extrapolate this knowledge to humans and to use the kinetics of hepatobiliary contrast agents as a tool for the diagnosis of hepatic diseases.

Ash Particle Erosion on Steam Boiler Convective Section

In this study, equations for the calculation of erosion wear caused by ash particles on convective heat exchanger tubes of steam boilers are presented. Anew, three-dimensional test arrangement was used in the testing of the erosion wear of convective heat exchanger tubes of steam boilers. When using the sleeve-method, three different tube materials and three tube constructions could be tested. New results were obtained from the analyses. The main mechanisms of erosionwear phenomena and erosion wear as a function of collision conditions and material properties have been studied. Properties of fossil fuels have also been presented. When burning solid fuels, such as pulverized coal and peat in steam boilers, most of the ash is entrained by the flue gas in the furnace. In bubbling andcirculating fluidized bed boilers, particle concentration in the flue gas is high because of bed material entrained in the flue gas. Hard particles, such as sharp edged quartz crystals, cause erosion wear when colliding on convective heat exchanger tubes and on the rear wall of the steam boiler. The most important ways to reduce erosion wear in steam boilers is to keep the velocity of the flue gas moderate and prevent channelling of the ash flow in a certain part of the cross section of the flue gas channel, especially near the back wall. One can do this by constructing the boiler with the following components. Screen plates can beused to make the velocity and ash flow distributions more even at the cross-section of the channel. Shield plates and plate type constructions in superheaters can also be used. Erosion testing was conducted with three types of tube constructions: a one tube row, an inline tube bank with six tube rows, and a staggered tube bank with six tube rows. Three flow velocities and two particle concentrations were used in the tests, which were carried out at room temperature. Three particle materials were used: quartz, coal ash and peat ash particles. Mass loss, diameter loss and wall thickness loss measurements of the test sleeves were taken. Erosion wear as a function of flow conditions, tube material and tube construction was analyzed by single-variable linear regression analysis. In developing the erosion wear calculation equations, multi-variable linear regression analysis was used. In the staggered tube bank, erosion wear had a maximum value in a tube row 2 and a local maximum in row 5. In rows 3, 4 and 6, the erosion rate was low. On the other hand, in the in-line tube bank the minimum erosion rate occurred in tube row 2 and in further rows the erosion had an increasing value, so that in a six row tube bank, the maximum value occurred in row 6.

Deposits of the sandy braided South Saskatchewan River: Implications for the use of modern analogs in reconstructing channel dimensions in reservoir characterization

Estimation of the dimensions of fluvial geobodies from core data is a notoriously difficult problem in reservoir modeling. To try and improve such estimates and, hence, reduce uncertainty in geomodels, data on dunes, unit bars, cross-bar channels, and compound bars and their associated deposits are presented herein from the sand-bed braided South Saskatchewan River, Canada. These data are used to test models that relate the scale of the formative bed forms to the dimensions of the preserved deposits and, therefore, provide an insight as to how such deposits may be preserved over geologic time. The preservation of bed-form geometry is quantified by comparing the Alluvial architecture above and below the maximum erosion depth of the modem channel deposits. This comparison shows that there is no significant difference in the mean set thickness of dune cross-strata above and below the basal erosion surface of the contemporary channel, thus suggesting that dimensional relationships between dune deposits and the formative bed-form dimensions are likely to be valid from both recent and older deposits. The data show that estimates of mean bankfull flow depth derived from dune, unit bar, and cross-bar channel deposits are all very similar. Thus, the use of all these metrics together can provide a useful check that all components and scales of the alluvial architecture have been identified correctly when building reservoir models. The data also highlight several practical issues with identifying and applying data relating to cross-strata. For example, the deposits of unit bars were found to be severely truncated in length and width, with only approximately 10% of the mean bar-form length remaining, and thus making identification in section difficult. For similar reasons, the deposits of compound bars were found to be especially difficult to recognize, and hence, estimates of channel depth based on this method may be problematic. Where only core data are available (i.e., no outcrop data exist), formative flow depths are suggested to be best reconstructed using cross-strata formed by dunes. However, theoretical relationships between the distribution of set thicknesses and formative dune height are found to result in slight overestimates of the latter and, hence, mean bankfull flow depths derived from these measurements. This article illustrates that the preservation of fluvial cross-strata and, thus, the paleohydraulic inferences that can be drawn from them, are a function of the ratio of the size and migration rate of bed forms and the time scale of aggradation and channel migration. These factors must thus be considered when deciding on appropriate length:thickness ratios for the purposes of object-based modeling in reservoir characterization.

Catalogue des manuscrits chinois de Touen-Houang. Volume V, N° 4001-6040 : fonds Pelliot chinois de la Bibliothèque nationale / [réd. sous la dir. de Michel Soymié ; publ. de l'Équipe de recherche sur les manuscrits de Dunhuang, École pratique des hautes études, IVe Section, URA 1063 du CNRS]

Collection : Publications hors série de l'École française d'Extrême-Orient