Análise dos remanescentes de mata atlântica do Estado do Rio Grande do Norte : uma perspectiva em alta resolução

The habitat loss and fragmentation are considered the main threats to the biodiversity. These threats operate at the landscape level, which drives the need to manage entire landscapes, not just its components. Although systematic monitoring of the Atlantic Forest biome has been ongoing since the late eighties, current data on forest fragmentation for the sub-region of Pernambuco are practically nonexistent. This study aimed to map out, with high spatial resolution, the remnants of Atlantic forest in Rio Grande do Norte, and conduct a landscape level analysis. The results show that the landscape is highly fragmented, where about 13.6% to 17% of biome remains. Most of the fragments is less than 10 ha, while a few fragments have area larger than 100 ha. Although the high degree of fragmentation, the average distance between fragments found was small (128 m), this estimate is lower than has been observed for the biome (1440m). There is evidence that abrupt changes in the quantification of landscape structure can occur when one observes the fragmentation at high spatial resolution. The results presented here can be used in management actions, in order to make the scenario more conducive to maintaining biodiversity.

Produtividade de híbridos de milho em função da velocidade de semeadura

O presente trabalho foi conduzido na área experimental do Laboratório de Máquinas e Mecanização Agrícola da UNESP - Jaboticabal, em um Latossolo Vermelho eutroférrico, em preparo convencional. Avaliaram-se o desenvolvimento e os componentes de produção de dois híbridos de milho (DKB 390, simples e DKB 435, duplo) em função de três velocidades do conjunto trator-semeadora-adubadora (5,4; 6,8 e 9,8 km h-1), totalizando seis tratamentos, com quatro repetições, em delineamento em blocos ao acaso, em esquema fatorial 2 x 3. Os resultados evidenciaram que o aumento da velocidade do conjunto trator-semeadora-adubadora reduziu a produtividade de grãos para o híbrido simples e não interferiu na produtividade do híbrido duplo. Apenas na menor velocidade (5,4 km h-1), o híbrido simples apresentou maior produtividade de grãos, comparado com o híbrido duplo. O aumento da velocidade na operação de semeadura reduziu a percentagem de espaçamentos normais entre as sementes, independentemente do híbrido estudado.

Semeadora-adubadora: exigências em função do preparo do solo, da pressão de inflação do pneu e da velocidade

As semeadoras-adubadoras, responsáveis pela correta adição de semente e adubo ao solo, possuem mecanismos dosadores acionados por suas rodas motrizes, que giram em função do contato com a superfície do solo. Esse contato é influenciado, entre outros fatores, pela pressão de inflação dos pneus. O objetivo do presente trabalho foi estudar o desempenho de uma semeadora-adubadora de precisão em função do preparo do solo (preparo convencional e plantio direto), das velocidades de deslocamento e da pressão de inflação do seu pneu. O trabalho foi realizado na UNESP de Jaboticabal (SP) no ano de 2006. Foram avaliadas as seguintes variáveis: força de tração e potência na barra, consumo de combustível (horário, ponderal, operacional e específico), capacidade de campo operacional, patinagem dos rodados do trator e da semeadora-adubadora, estande inicial e distribuição longitudinal de sementes. O sistema plantio direto demandou maior força (35 %), potência e consumo horário de combustível; o mesmo aconteceu na maior velocidade. A pressão de inflação das rodas da semeadora proporcionou menor patinagem e maior estande inicial de plântulas.

Demanda energética e eficiência da distribuição de sementes de milho sob variação de velocidade e condição de solo

O trabalho teve o objetivo de avaliar a demanda energética e a eficiência da distribuição de sementes de uma semeadora-adubadora para semeadura direta, submetida à variação de velocidade e condições de solo, na semeadura da cultura do milho. O estudo foi desenvolvido em um Nitossolo Vermelho distrófico, na Fazenda Experimental Lageado, no município de Botucatu - SP. O delineamento experimental foi em blocos casualizados, com oito repetições, combinando-se três velocidades de deslocamento (4,4; 6,1 e 8,1 km h-1) e duas condições de solo (solo manejado sob sistema de plantio direto há cinco anos e solo preparado com escarificador há 18 meses). Avaliaram-se a força de tração, a potência na barra de tração, o consumo de combustível, a capacidade de campo efetiva, a distribuição longitudinal de plantas, o coeficiente de variação, o índice de precisão e o número de plantas por hectare (estande inicial). Os resultados revelaram que, aumentando-se a velocidade de 4,4 para 8,1 km h-1, consegue-se aumentar em 86% a capacidade operacional, com incremento de 96% na demanda de potência na barra de tração e redução de 26% no consumo operacional de combustível. A maior velocidade (8,1 km h-1) proporcionou menor porcentual de espaçamentos normais e aumento no porcentual de espaçamentos múltiplos e falhos, maior coeficiente de variação e pior índice de precisão. A variação da velocidade não interferiu no número de plantas por hectare.

Avaliação de semeadora-adubadora de precisão trabalhando em três sistemas de preparo do solo

Avaliou-se uma semeadora-adubadora de precisão com quatro linhas, na cultura do milho (Zea mays L.), trabalhando em Latossolo Vermelho-Escuro eutrófico, A moderado, textura argilosa. As parcelas experimentais foram dispostas em blocos casualizados, com quatro repetições, em esquema fatorial 3 x 3, totalizando 36 observações. Os fatores foram dados pelos sistemas de preparo do solo (convencional, plantio direto e reduzido) e pelas marchas do trator (3ª reduzida alta, 4ª reduzida baixa e 4ª reduzida alta). Foram analisadas as variáveis velocidade de deslocamento, queda de velocidade, força de tração e potência na barra, consumo de combustível, rotação do motor e patinagem média dos rodados do trator. Os resultados mostraram que a operação de semeadura em solo sob preparo reduzido apresentou maior consumo de combustível, menor velocidade de deslocamento, menor capacidade de campo efetiva e maior patinagem.

Concentrações séricas hormonais em vacas azebuadas submetidas à baixa e alta ingestão alimentar

O objetivo deste trabalho foi avaliar a influência da ingestão alimentar nas concentrações séricas de hormônios reprodutivos e metabólicos em vacas azebuadas. Dezoito vacas foram divididas em dois grupos: 170% (alta ingestão = A) e 66% (baixa ingestão = B) da dieta de manutenção. Com 21 dias nas dietas experimentais, as vacas tiveram o estro sincronizado. Posteriormente, os ovários foram avaliados por ultra-sonografia transretal e sangue foi coletado diariamente até o dia 7 do ciclo (ovulação = dia 1). Na análise estatística, utilizou-se o teste t. As vacas ganharam 1,1 kg por dia no grupo A e perderam 1,5 kg por dia de PV no grupo B. Apesar de não ter havido diferença entre os grupos no diâmetro máximo do folículo ovulatório, o grupo A apresentou pico pré-ovulatório de estradiol sérico menor. Não foi observada diferença entre os grupos quanto ao volume luteal e concentração sérica de progesterona no dia 7 do ciclo e de FSH, IGF-I e insulina séricos no período peri-ovulatório. As dietas experimentais não alteraram a função ovariana e as concentrações séricas de hormônios reprodutivos e metabólicos, com exceção do estradiol, sugerindo que, no grupo de alta ingestão, ocorreu maior metabolismo desse hormônio.

Identificação de crianças e adolescentes com suspeita de câncer: uma proposta de intervenção

Unlike adult cancer, where cells usually originate from epithelial tissue and is linked to environmental factors, malignant tumors in childhood are mostly of embryonic origin and have a phase of rapid proliferation. When not started chemotherapy at this stage, the tumor increases in size, reducing their growth rate, thus reducing the response to chemotherapy. Childhood cancer is in Brazil, the second cause of mortality among children and adolescents from one to nineteen. His impact on the ranking of diseases becomes significantly important to public health since the first issue is related to accidents and violence. Many children are still sent to the centers of high complexity for cancer treatment with advanced stage disease. The delay in referral to diagnosis can be family, or the difficulty of access to the health sector, or the characteristics of the disease and lack of health staff regarding theme of childhood cancer. Before this problem, we aimed to assess the performance of health teams in the identification of child and adolescent symptoms of cancer in primary care, through the action research methodology, which includes the teaching-learning, seminars, describing the actions of the group and discussing the activities after the training. This study involved thirty-seven health professionals who provide care for children and adolescents in the USF Felipe Shrimp II, the Support Center for Children with Cancer and the pediatric hospital UFRN during the period from March to December 2010. The data were analyzed simultaneously to evaluate actions, following the direction of the analysis of ideas Freires, having as theoretical reference the primary health care. The diagnosis of current reality, as knowledge of the health team targeted for early identification of signs and symptoms raised through questioning, presented as generative themes: resistance to change, awareness of the need for apprehension of knowledge; prior knowledge through the media, fragmentation of the healthcare network, interfering with the operation of the reference and counter, the stigma of death, among others. The selected themes enabled the choice of content for the preparation of four seminars, such as implementation of collective action for discussion problematical. The teaching-learning process has allowed the study participants awareness of the problem and work through the knowledge acquired by interfering in decreasing the time interval between the identification of signs and symptoms of cancer and early specialist treatment. Their difficulties we are faced with a diagnosis of terminal cancer and associated with delayed access to laboratory tests and imaging necessary for the diagnosis of neoplasms. Thus, we find that when the team is consciously involved in the education process from identification of the problem situation, there may be significant changes in daily activities through awareness of being. However, we also realize that acquisition of knowledge and interest of the team are not enough, since to be efficiency of our service, we need an organization of cancer care network operating in the state of Rio Grande do Norte

Efeito da temperatura e da luz na germinação de sementes de Acacia polyphylla DC.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características agronômicas e qualidade comercial de cultivares de milho pipoca em alta população

Com o objetivo de identificar cultivares de milho pipoca que se constituam em alternativa viável aos produtores foi conduzido um experimento em delineamento experimental de blocos casualizados, com cinco genótipos de milho pipoca (BRS Ângela, Zélia, IAC 112, IAC 12 e IAC TC-01) e quatro repetições, na safra 2003/2004. O experimento foi instalado em espaçamento entre as linhas de 60 cm, com densidade populacional de 75 mil plantas por hectare. No decorrer do experimento, foram avaliadas características agronômicas e comerciais em condição de campo e de laboratório. A variedade BRS Ângela apresentou maior produtividade, seguida pelos híbridos simples IAC, com Zélia (híbrido triplo) apresentando menor produtividade. O híbrido simples IAC 12 apresentou pior qualidade comercial de pipoca. A produção de grãos está associada positivamente com o número de grãos por espiga e com a massa de 1.000 grãos e negativamente com o teor de Ntotal no grão. A qualidade comercial se correlacionou negativamente com a massa de 1.000 grãos.

Evidências de validação de um protocolo para assistência às pessoas com úlceras venosas em serviços de alta complexidade

Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs . After analyzing the ratios obtained in this step, which reported kappa between 0.75 and 0.96 and between 0.80 and 0.98 IVC, and the suggestions of the judges, the protocol was adjusted and subjected to empirical evidence to validate the clinical setting at the University Hospital Onofre Lopes in Natal / RN. Evidence of validation in the clinical setting involved 4 judges who acted in pairs (paired) evaluated 32 patients with venous ulcers in the clinical context of high complexity. In both stages, we used the Kappa Index and Content Validity Index to analyze the responses of the judges. The parameters set as acceptable for these indices were: Kappa ≥ 0.61 and Content Validity Index > 0.80. Any evidence of content validity, as evidence of validation in the clinical context, the protocol items that have not reached Kappa and Content Validity Index established indices were excluded and some items were modified or added after suggestions. The process of content validation evidence and evidence of validation in the clinical setting allowed the improvement of the protocol for the care of people with venous ulcers initially proposed. The initial version of the protocol, built from the literature, contained 15 categories and 108 items; after evidence of content validity, remained the reduction to 15 categories with 91 items; the final version, clinically validated, is composed of the same 15 categories, 76 items. The protocol was validated in its content and in the clinical aspect, so we accepted the alternative hypothesis in the study. This protocol may contribute to the care system, allowing tailor behaviors and promote greater resolution in the treatment of people with venous ulcers in health services of high complexity

Técnicas de simplificação de redes e otimização multiobjetivo para análise de variações de tensão em regime permanente provocadas por parques eólicos integrados ao sistema elétrico

This study presents a description of the development model of a representation of simplified grid applied in hybrid load flow for calculation of the voltage variations in a steady-state caused by the wind farm on power system. Also, it proposes an optimal load-flow able to control power factor on connection bar and to minimize the loss. The analysis process on system, led by the wind producer, it has as base given technician supplied by the grid. So, the propose model to the simplification of the grid that allows the necessity of some knowledge only about the data referring the internal network, that is, the part of the network that interests in the analysis. In this way, it is intended to supply forms for the auxiliary in the systematization of the relations between the sector agents. The model for simplified network proposed identifies the internal network, external network and the buses of boulders from a study of vulnerability of the network, attributing them floating liquid powers attributing slack models. It was opted to apply the presented model in Newton-Raphson and a hybrid load flow, composed by The Gauss-Seidel method Zbarra and Summation Power. Finally, presents the results obtained to a developed computational environment of SCILAB and FORTRAN, with their respective analysis and conclusion, comparing them with the ANAREDE

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Dispositivos planares integrados utilizando método dinâmico com metamateriais e PBG

This work presents a theoretical, numerical and computation analysis of parameters of a rectangular microstrip antenna with metamaterial substrate, fin line as a coupler and also integrated devices like integrated filter antenna. It is applied theory to full-wave of Transverse Transmission Line - TTL method, to characterize the magnitude of the substrate and obtain the general equations of the electromagnetic fields. About the metamaterial, they are characterized by permittivity and permeability tensor, reaching to the general equations for the electromagnetic fields of the antenna. It is presented a study about main representation of PBG(Photonic Band Gap) material and its applied for a specific configuration. A few parameters are simulated some structures in order to reduce the physical dimensions and increase the bandwidth. The results are presented through graphs. The theoretical and computational analysis of this work have shown accurate and relatively concise. Conclusions are drawn and suggestions for future work

Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo

This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system