冷轧MES机组作业计划过程中的任务分配法

基于鞍钢新轧集团股份有限公司冷轧薄板厂MES工程的实际情况,介绍了机组排产作业计划过程中的任务分配方法。该方法以机组与生产任务的最佳匹配、机组的负荷平衡为性能指标,采用了实时最小负荷分配规则,科学地解决了冷轧生产线CIMS环境下机组排产作业计划的在线生成问题,实现了生产线上的生产路径优化控制,从而提高了生产质量和设备利用率。

广西合山固体废弃物制备地质聚合物胶凝材料

Geopolymer gelatinous material was prepared by ferroalloy slag (signed with NKT in laboratory) and circulating fluidization bed slag (CFB slag, signed with NM in laboratory) produced from Heshan city, Guangxi zhuang autonomous region, China. The mechanical properties of the geopolymer made of high content ferroalloy slag can reach the standard of 42.5# portland blastfurnace-slag cement, and it’s processing technology is more simple and not need of mill and burn and will not produce harmful gas. By means of chemical and XRD analyses, it is concluded that NKT is a kind of acidity water-granulated slag with better activation and fit to be activated by alkali activators. Low-cost industrial gypsum (signed with NG in laboratory), analytic reagent oxide(signed with NH in laboratory) and sulfate(signed with NS in laboratory) were selected as alkali activation in the experiment. The results showed NH is a good alkali activator for NKT. Both NH and NG can activate ferroally slag’s activities, but NS can’t alone. The activation effect of superimposing activation of NH and NG excel by separateness. Based on those experiments, optimization compounds were carried out: (1) NKT: NH: NG = 80: 10: 10 and (2) NM: NKT: NS: NG: NH = 10: 70: 2: 8: 10。. The soundness of the test blocks is good by boiling examination. Through XRD, SEM, IR, NMR analyses of geopolymer, the reaction mechanism of geopolymer prepared by alkalescent activating in solid wastes was discussed in the thesis first. It is point out, there is difference in reaction mechanism between traditional geopolymer preparation and the preparation of alkalescent activating solid wastes because NG is a industry product. There is the similar process of depolymerization and reunion of Si-O bond. The latter preparation process generate new subtance but the former doesn’t. In the experiment, we found a performance of NKT that the water requirement of normal consistency of geopolymer reduces with increasing content of NKT. The result shows NKT has some ability to reduce water requirement. The performance is worthy of further research and utilization. Making use of solid wastes to prepare geopolymer, not only can settle environment problem caused by a great deal of dump of NKT, but also settle the shortage of natural resources. Moreover it could take economic, environmental and social benefits and settle thoroughly contradiction in the environment protection and regional economy development and promote circulation economy development.

Ocorrência de Fusarium oxysporum f. sp. lycopersici raça 3 em tomate no Brasil e seleção de novas fontes de resistência ao patógeno.

A murcha-de-fusário, causada por Fusarium oxysporum f. sp. lycopersici (FOL), é uma importante doença do tomateiro (Lycopersicon esculentum Mill.) no mundo. Existem três raças identificadas do patógeno, sendo que a raça 3 ainda não havia sido registrada no Brasil. Este trabalho teve dois objetivos: comunicar a presença da raça 3 de FOL no Brasil e selecionar fontes de resistência às três raças do patógeno. Nove isolados de FOL foram obtidos de dois híbridos de tomate (Carmen e Alambra) com sintomas de mrucha, provenientes de três lavouras localizadas nos municípios de Venda Nova do Imigrante - Espírito Santo e Domingos Martins 9ES). Estes dois híbridos comerciais de tomate são considerados resistentes ás raças 1 e 2 de FOL. O teste de virulência foi feito com as cultivares: Ponderosa (suscetível a todasa as raças), IPA-5 (resistente à raça 1), Floradade (resistente às raças 1 e 2) e BHRS-2,3 (resistente às raças 1, 2 e 3). Todos os isolados foram virulentos às cultivares Ponderosa, IPA-R e Floradade e ainda infectaram algumas plantas de BHRS-2,3. O teste de virulência foi repetido com as mesmas cultivares mas também incluindo o acesso 'LA 716' da espécie selvagem L. pennellii. Foram obtidos resultados semelhantes para as cultivares, enquanto L. pennellii apresentou uma reação de imunidade ao patógeno. Estes resultadaos comprovam que os novos isolados de ES pertencem à raça 3 de FOL. Uma coleção de germoplasma de acessos de Lycopersicon spp. da Embrapa Hortaliças foi inicialmente avaliada quanto à reação de um dos isolados da raça 3 e uma parte deles às raças 1 e 2. Novas fontes de resistência múltipla foram identificadas em acessos de L. chilense, l. hirsutum e L. peruvianum, sendo dez genótipos imunes às raças 2 e 3 e cinco às três raças. A identificação destas fontes de resistência peermite que os programas de melhoramento de tomate antecipem potenciais problemas, inclusive a emergência de novas raças de FOL, além das raças 1, 2 e 3.

Caracterização de isolados de Phytophthora infestans obtidos de tomateiro.

O tomateiro (Solanum lycopersicum L. = Lycopersicon esculentum Mill.) é uma das plantas oleráceas mais cultivadas no Brasil e o seu fruto, o tomate, é uma das olerícolas mais consumidas na mesa do brasileiro e muito usado pela agroindústria. Uma das doenças do tomateiro mais temidas pelos produtores é a requeima, causada pelo fungo Phytophtora infestans, que provoca grande destruição na cultura em pouco tempo. Este trabalho teve o objetivo de caracterizar isolados de P. infestans, coletados de tomateiros, quanto ao grupo de compatibilidade, à virulência e à resistência ao fungicida mefenoxan. Vinte e seis isolados foram caracterizados quanto ao grupo de compatibilidade; 24 foram caracterizados quanto à resistência ao mefenoxan; e determinou-se o espectro de virulência de 14 isolados. Todos os 26 isolados testados foram classificados como do grupo A1 de compatibilidade. Em relação à virulência, todos os isolados foram virulentos à cultivar de tomate 'IPA-5'. A maioria foi virulenta em plantas de tomate com os genes Ph1 (92,86%) ou Ph2 (78,57%) e uma pequena parte dos isolados foram virulentos em plantas com o gene Ph3 (21,43%). Quanto à resistência ao mefenoxan, a freqüência de isolados sensíveis, intermediários e resistentes foram de 16,67%, 16,67% e 66,66%, respectivamente. Há evidências da não-reprodução sexuada e formação de oósporos nos campos de tomate do país, retardando o aparecimento da doença. Devido a um maior número de isolados resistentes ao mefenoxan, o controle da requeima com este fungicida pode ser ineficiente em campo. Uma vez que o patógeno apresentou um amplo espectro de virulência, a utilização de cultivares com resistência vertical a requeima não é recomendada. O manejo integrado da requeima é a forma mais eficaz de se controlar a doença.

Figer: A Quadraphonic Electroacoustic Composition

Figer (to congeal, to solidify) is a quadraphonic electroacoustic composition. It was completed in the fall of 2003. Several software programs were used in creating and assembling the piece (C-Sound, Grain Mill, AL/Erwin (grain generator), Sound Forge and Acid Music). The sounds used in the piece are of two general types: synthesized and sampled, both of which were subjected to various processing techniques. The most important of these techniques, and one that formally defines large portions of the piece, is granular synthesis. Form The notion of time perception is of great importance in this piece. Figer addresses this question in several ways. In one sense, the form of Figer is simple. There are three layers of activity (see diagram). Layer 1 is continuous and non-sectional and supplies a backdrop (not necessarily a background) for the other two. The second and third layers overlap and interrupt one another. Each consists of two blocks of sound. The layers, and blocks within, relate to each other in various ways. Layer 1 is formally continuous. Layer 2 consists of well-defined columns of sound that evolve from soft and mild to loud and abrasive. The layer is, in reality, a whole that is simply cut into two parts (block 1 and block 2). In contrast, the blocks of layer 3 do not constitute a whole. Each is a complete unit and has its own self-contained evolutionary path. Those paths, however, do cross the paths of other units (layers, blocks), influencing them and absorbing some of their essence. At the heart of Figer lies a constant process of presenting materials or ideas and immediately, or, at times, simultaneously, commenting, reflecting on, or reinterpreting that material. All of the layers of this piece deal, both at local and global levels, with the problem of time and its perception relative to the materials, sonic or otherwise, that occupy it and the manner in which they unfold and relate to each other.

A longitudinal study of epigenetic variation in twins.

DNA methylation is a key epigenetic mechanism involved in the developmental regulation of gene expression. Alterations in DNA methylation are established contributors to inter-individual phenotypic variation and have been associated with disease susceptibility. The degree to which changes in loci-specific DNA methylation are under the influence of heritable and environmental factors is largely unknown. In this study, we quantitatively measured DNA methylation across the promoter regions of the dopamine receptor 4 gene (DRD4), the serotonin transporter gene (SLC6A4/SERT) and the X-linked monoamine oxidase A gene (MAOA) using DNA sampled at both ages 5 and 10 years in 46 MZ twin-pairs and 45 DZ twin-pairs (total n=182). Our data suggest that DNA methylation differences are apparent already in early childhood, even between genetically identical individuals, and that individual differences in methylation are not stable over time. Our longitudinal-developmental study suggests that environmental influences are important factors accounting for interindividual DNA methylation differences, and that these influences differ across the genome. The observation of dynamic changes in DNA methylation over time highlights the importance of longitudinal research designs for epigenetic research.

Precios del arándano fresco en el mercado mayorista de Estados Unidos con énfasis en el origen argentino y chileno

p.195-205

Impacts of climate change on non-native species

Anthropogenic changes to climate and extreme weather events have already led to the introduction of non-native species (NNS) to the North Atlantic. Regional climate models predict that there will be a continuation of the current trend of warming throughout the 21st century providing enhanced opportunities for NNS at each stage of the invasion process. Increasing evidence is now available to show that climate change has led to the northwards range expansion of a number of NNS in the UK and Ireland, such as the Asian club tunicate Styela clava and the Pacific oyster Crassostrea gigas. Providing definitive evidence though of the direct linkage between climate change and the spread of the majority of NNS is extremely challenging, due to other confounding factors, such as anthropogenic activity. Localised patterns of water movement and food supply may also be complicating the overall pattern of northwards range expansion, by preventing the expansion of some NNS, such as the slipper limpet Crepidula fornicata and the Chilean oyster Ostrea chilensis, from a particular region. A greater understanding of the other aspects of climate change and increased atmospheric CO2, such as increased rainfall, heat waves, frequency of storm events, and ocean acidification may aid in increasing the confidence that scientists have in predicting the long term influence of climate change on the introduction, spread and establishment of NNS.

Pension structural reforms, re-reforms and their effects on social welfare: The case of Chile

This article fi rst summarizes the structural reforms of pensions (total or partial privatization) in Latin America and Central and Eastern Europe, identifying their advantages and disadvantages, and does the same with the international process of re-reforms of pensions with a greater role of the state. Second, chooses Chile as a case study, as a world pioneer in both types of reforms; describes their characteristics and effects on social welfare of the structural reform of 1981 and the re-reform of 2008. Such effects are evaluated based on ten basic principles of social security from the International Labour Offi ce (ILO): 1) social dialogue to approve the reforms, 2) universal coverage of the population, 3) equal treatment of insured persons, 4) social solidarity, 5) gender equity, 6) suffi ciency of benefi ts, 7) effi ciency and reasonable administrative cost, 8) social participation in the management of the system, 9) role of the state and supervision, and 10) fi nancial sustainability. Third, it summarizes the advantages and disadvantages-challenges of the re-reform and informs on the current debate for further reforms.

Prueba de inmigración y márgenes legales del desencuentro. Políticas públicas, prácticas sociales y construcción de la persona

La redacción de las directrices y los procedimientos administrativos que hacen virtualmente posible la inmigración, contribuye a construir no sólo los itinerarios sino también el imaginario social sobre la alteridad. El principal objetivo del artículo es poner de relieve –mediante el análisis discursivo de las Hojas informativas publicadas en la WEB del Ministerio de Empleo y Seguridad Social- cómo la construcción social del emigrante/inmigrante y el proyecto migratorio topan con unas representaciones y envites, instituidos y refrendados  en y por la propia formulación de la reglamentación, pero no del todo explícitos. Entendiendo el texto como una acción que genera otras acciones, se examinan las consecuencias que tiene sobre la practica social de los inmigrantes. En suma, se trata  de vislumbrar los elementos (terminología, fórmulas, esquemas y prácticas inducidas) que van constituyendo al inmigrante como agente social subordinado a micro-procesos y relaciones que se le escapan en gran parte (en contra de las apariencias que parecieran sugerir lo contrario) y van marcando su propia capacidad de acción. En conclusión y retomando la distinción entre principio de diferencia y principio de indiferencia sugerida por Foucault, se muestra que mientras el primero rige las clausulas generales, el segundo articula las específicas.

El modelo del sistema viable: una referencia estratégica para el estudio organizacional del sector cooperativo chileno

The Chilean Cooperative Sector (SCCh) can be explained as a human activity system of high complexity, which seeks to maintain an independent existence, in example, be viable. From this perspective, the Viable System Model (MSV) as conceptual reference presents a real opportunity to study the organization of the cooperative sector in Chile.The central objective of the work refers to study the feasibility of SCCh in a context of sectorial organization, considering the social, legal and economic fabric of the country today.To do this, supported by a systemic methodology were performed: a characterization of the problem situation of the sector -identifying some relevant factors in the areas of market structure, legal regulations and inter cooperation-an organizational diagnosis and proposed a set guidelines for its development.From the above it is concluded that there is relevance between the characteristics of the case study theoretical and methodological approach. The methodology takes tested in other organizational practices such as VIPLAN tools, and applies the SCCh. Its contribution in the field of study is oriented around a holistic view of the organization and promotion of their viability, thereby generating an approach that delivers specific sectorial development strategies, surpassing the approximation of descriptive characterization. Thus, we provide a diagnostic model of the Chilean Cooperative Sector and propose guidelines to support their organizational development.

Creation of damage-free ferroelectric nanocapacitors via focused ion beam milling

We present a novel method for creating damage-free ferroelectric nanostructures with a focused ion beam milling machine. Using a standard e-beam photoresist followed by a dilute acid wash, nanostructures ranging in size from 1 mu m down to 250 nm were created in a 90 nm thick lead zirconate titanate ( PZT) wafer. Transmission electron microscopy and piezoresponse force microscopy ( PFM) confirmed that the surfaces of the nanostructures remained damage free during fabrication, and showed no gallium implantation, and that there was no degradation of ferroelectric properties. In fact DC strain loops, obtained using PFM, demonstrated that the nanostructures have a higher piezoresponse than unmilled films. As the samples did not have any top hard mask, the method presented is unique as it allows for imaging of the top surface to understand edge effects in well-defined nanostructures. In addition, as no post-mill annealing was necessary, it facilitates investigation of nanoscale domain mechanisms without process-induced artefacts.

Development and validation of a lateral flow device for the detection of nicarbazin contamination in poultry feeds

Concentrations of the coccidiostat nicarbazin as low as 2 mg/kg in feed can result in violative drug residues arising in poultry liver. A lateral flow device (LFD) was developed for the detection of contaminating concentrations of nicarbazin following solvent extraction of poultry feeds. Test results, as determined by both visual and instrumental measurement, are available within minutes. For 22 feed samples, nicarbazin-free and fortified at 2 mg/kg, the % relative inhibition ranged from 0 to 45% and from 53 to 85%, respectively. Nicarbazin contamination at the critical concentration (2 mg/kg) can be determined in all cases providing the sampling is representative. A wide range of feed samples taken at a mill that incorporated nicarbazin into poultry feed were analyzed. Data generated for these samples by both the LFDs and a mass spectrometric method were compared, and a significant correlation was achieved.

Deposition and depletion of five anticoccidials in eggs

Anticoccidials are compounds that are widely used as feed additives to prevent and treat coccidiosis. They are licensed for use in a prescribed concentration and during a certain time interval for broilers and pullets but not for laying hens. It was shown in the past that carry-over at the feeding mill is found to be the main reason for the presence of residues in eggs. An animal experiment was set up to investigate the effect of carry-over at the feeding mill on the presence of residues of anticoccidials in eggs. For the compounds diclazuril, robenidine, halofuginone and nicarbazin in combination with narasin, two concentration levels were tested: the maximum allowed concentration for broilers (100%) and a concentration corresponding to 5% carry-over during feed preparation. Also dimetridazole was included in the experiment but only at one concentration level. Eggs were sampled during treatment (14 days) and for a period of 30 days after withdrawal of the anticoccidial-containing feed. Residues were determined, and deposition and depletion curves were generated. Analyses were performed by ELISA and LC-MS/MS. For all compounds, substantial residues could be found in the 5% groups, which points out the risk of carry-over at the feeding mill. The distribution of the residues between egg yolk and white was determined by analyzing both fractions.

An array-based study of reactivity under solvent-free mechanochemical conditions-insights and trends

An array-based approach is put forward to obtain insight into reactivity under mechanochemical solvent-free conditions. We describe a survey of sixty potential reactions between twelve metal salts MX2 {(M = Cu, X-2 = (OAc)(2), (HCO2)(2), (F3CCO2)(2), (acac)(2), (F(6)acac)(2), (NO3)(2), SO4; M = Ni, X-2 = (OAc)(2), (NO3)(2), SO4; M = Zn, X-2 (OAc)(2), (NO3)(2)} and five bridging organic ligands {isonicotinic acid (HINA), 1,4-benzenedicarboxylic acid (H2BDC), acetylenedicarboxylic acid (H(2)ADC), 1,3,5-benzenetricarboxylic acid (H3BTC), 4,4'-bipyridyl (BIPY). Reaction conditions involved a ball mill, applied for 15 min at 30 Hz, without external heating. When examined by XRPD, forty of the combinations gave detectable reactions, thirty-eight with crystalline products. Of these, twenty-nine reactions were quantitative (consuming all of at least one reactant). Comparison of XRPD patterns with patterns simulated from single crystal X-ray diffraction data in the Cambridge Structural Database allowed structural identification of six products. Of particular interest are the microporous framework materials [Cu(INA)(2)] and [Cu-3(BTC)(2)] (HKUST-1) obtained by reaction of the corresponding carboxylic acids with copper acetate. Other non-porous polymers with 3-dimensional connectivity, [Ni(ADC)(H2O)(4)], or 1-dimensional connectivity, [Cu(acac)(2)(BIPY)] and [Cu(F6acac)(BIPY)] were also obtained. Reaction between zinc acetate and H2ADC gave a new product which had not previously been characterised by single-crystal X-ray crystallography, but whose XRPD pattern suggests that it is isostructural with the known nickel polymer [Ni(ADC)(H2O)(4)]. Two further isostructural nickel and zinc products were obtained in reactions between HINA and nickel nitrate and zinc nitrate. Trends observed within the array are discussed. Copper acetate and copper formate were the most effective starting materials for reaction with carboxylic acids, potentially related to the basicity of their anions and the solvating effects of the formic and acetic acid byproducts. Amongst the ligands there was a general negative corelation between melting point and reactivity. The issue of pore templating in microporous phases and the generation of new structures is also discussed in relation to the Cu(INA)(2), Cu-3(BTC)(2) and nickel nitrate-BIPY systems. Overall, the study suggests that mechanochemical reactivity between metal salts and organic ligands under solvent free conditions is remarkably general. Use of array-based approaches as demonstrated here is advocated a useful way to reveal underlying trends in reactivity under solvent free mechanochemical conditions and to highlight particular cases for more detailed study.