Caracterização da intensidade do exercício físico (natação) em ratas prenhes: repercussões materno-fetais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de poliacrilamida na redução da perda de carga em tubulação de polietileno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da produção e qualidade físico-química de méis produzidos no Estado de Pernambuco

The present study had as objective contribute to the characterization of beekeeping in the Pernambuco State and evaluate the physical-chemical quality of the honeys produced in the region. For this, was applied a directed formulary to the representative organ of beekeeping class aboutthe productives and technicals aspects of beekeepers. Was obtained 14 samples of honey by Apis mellifera africanized, stored in sterile plastic vessels was sent to the Beekeeping Products Quality Control Laboratory (CEA-UNITAU). Was observed that the most of beekeepers have of 50 to 100 hives (57,14%), 28,57% of 100 to 200 hives and 14,28% more than 500 hives, being that 85,71% produce 30 to 50 kg honey/hives/flowering. All use the standard hive Langstroth and 85,71% obtain their swarm by capture. About the physical-chemical quality of the honey, was observed that moisture content varied from 18,2% to 22,0%, with mean value of 19,80±1,11; the water activity varied from 0,70 to 0,84 aw, with mean value of 0,79±0,05 aw; the total acidity was 24,91±8,99 meq/kg and the average index of hydroxymethylfurfural was 16,32±17,88 meq/kg. The results obtained are according to the quality limits established by the brazilian legislation, excepted the water activity that exceeded the maximum limit of 0,65 aw. The datasobtained in this paper shows the development of beekeeping in Pernambuco State and the honey presents nice quality.

Somatotropina bovina (rbST) recombinante sobre as características físico-químicas da carne de cabritos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Utilização dos parâmetros físico-químicos e redes neurais artificiais na identificação dos méis de abelhas (Apis mellifera L.) produzidos no verão e inverno na microrregião de Campos de Jordão, São Paulo

The objective of this work was to typify, through physicochemical parameters, honey from Campos do Jordão’s microrregion, and verify how samples are grouped in accordance with the climatic production seasonality (summer and winter). It were assessed 30 samples of honey from beekeepers located in the cities of Monteiro Lobato, Campos do Jordão, Santo Antonio do Pinhal e São Bento do Sapucaí-SP, regarding both periods of honey production (November to February; July to September, during 2007 and 2008; n = 30). Samples were submitted to physicochemical analysis of total acidity, pH, humidity, water activity, density, aminoacids, ashes, color and electrical conductivity, identifying physicochemical standards of honey samples from both periods of production. Next, we carried out a cluster analysis of data using k-means algorithm, which grouped the samples into two classes (summer and winter). Thus, there was a supervised training of an Artificial Neural Network (ANN) using backpropagation algorithm. According to the analysis, the knowledge gained through the ANN classified the samples with 80% accuracy. It was observed that the ANNs have proved an effective tool to group samples of honey of the region of Campos do Jordao according to their physicochemical characteristics, depending on the different production periods.

Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Análise parâmetros elétricos consumo, fator de carga e demanda de empresas de refino de óleo vegetal

Empresas muitas vezes tem seu consumo de energia elétrica descontrolados por possuírem motores elétricos muitas vezes super-dimensionados, trabalhando em vazio ou em horário de pico. Sendo este tipo de atividade responsável por grande parte do gasto energético da empresa. Existem dois fatores que avaliam o modo de utilização desta energia, denominados fator de potência (fp) e fator de carga (fc), que indicam a eficiência e racionalidade da forma de utilização da energia elétrica, respectivamente. A necessidade de uma avaliação global da utilização da energia, levando em consideração os dois fatores citados, é realizada por especialistas da área energética para a determinação da situação real da empresa. Podendo ser uma tarefa árdua muitas vezes demorada. Para isto é necessária uma análise estatística descritiva dos dados. Este trabalho tem como objetivo realizar esta analise de dados de uma empresa de refino de óleo vegetal.

Efeito de dois sistemas de manejo do solo nas propriedades físico-hídricas, desenvolvimento radicular e produtividade do milho

Corn cultivation is part of crop rotation used by irrigation farmers from the southwestern region of São Paulo state, Brazil, who use no-tillage soil management as a kind of sustainable use of soil. The effect of this conservative practice on physical and hydrical properties of the soil, root development and corn crop yield compared to the conventional management was the objective of this work. The experiment was held at the Buriti-Mirim Farm, Angatuba, SP, Brazil, using an irrigated area with a center pivot system and two types of soil management: conventional and no-tillage systems. Although the no-tillage management had higher soil density and less water availability, no significant difference was found for both management systems concerning soil resistance to penetration, root development and crop yield. In both systems of soil management, 90% of roots were concentrated in the first 0-20cm of soil layer.

Influência dos espaçamentos de plantio da cultura de cana-de-açúcar (Saccharum spp) nos atributos físico-hídricos do solo

The evolution of sugar cane mechanized harvesting made the sector to question the current row spacing used due to its influence on soil compaction. The aim of this study was to evaluate the soil hydro-physical attributes in two row spacings after the farm machinery traffic. The treatments were conducted in a randomized block design with twelve repetitions, being subjected to the variance analyze in double factorial arrangement. The bulk density, the gravimetric water content, and the soil cone index along the position of crop lines (LC) and 0,1m from the row (LP) at the range of depth of 0 to 0.2m and 0.2 to 0.4m were assessed in both row spacings after the fourth harvest season. The results showed that the row spacings of 1.4 and 1.5m did not affect the values of bulk density and gravimetric water content of the soil in all ranges of depth and sample positions studied. However, in the depth range of 0.2 to 0.4 m, the values of soil cone index (IC) in the row spacing of 1.5 m were higher than the values in row spacing of 1.4 m, at both sampling positions. Regardless of row spacing and sample position, the values of soil cone index in the depth range of 0.2 to 0.4m were higher than the depth range of 0 to 0.2m.

Perda de carga em reduções concêntricas de PVC

In the pumping pipelines the located load losses are very important since they have direct influence on hydraulic design of an irrigation system, especially regarding the concentric reducers used in the distribution lines. Hence this work was conducted in the Laboratório de Hidráulica do Centro Federal de Educação Tecnológica de Uberaba. We analyzed 03 concentric reducers PVC 75 x 50 mm, 50 mm and 35 x 35 x 1 "operating at different flow rates. The performance of the tests with the variation of flow in every situation possible to obtain equations to estimate the loss. The equation models presented a high setting, thus enabling the determination of the localized head loss in a situation closer to field reality. For the reduction of 75 x 50 x 35 mm and 50 mm at a flow rate 16.97 m³ h-1 the pressure drop reduction was obtained respectively 0.9263 and 2.7408 mca. To the reduction of 35 x 1 "at a flow rate of 6.02 m³ h-1 was obtained 2.9304 mca pressure drop reduction. The located losses produced by these reductions are relatively high and should be considered with great discretion in hydraulic design of the irrigation system.

Características Físico-Químicas, energéticas e desempenho da fibra de coco na sorção de óleo diesel e biodiesel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Capacidade de suporte de carga e densidade do solo em áreas de plantio direto com e sem escarificação

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Caracterização físico-química e avaliação energética de geléia elaborada em diferentes tipos de tachos com polpa e suco de acerola

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Composição físico-química e cor de clones de mandioquinha-salsa

This study aimed to characterize the physical and chemical composition of ten items of arracacha grown in the municipality of São Manuel for the 2009 harvest. In the roots of the clones BGH (4560, 5741, 5744, 5746, 5747, 6414, 6513, 6525 and 7609) and the cultivar Amarela de Senador Amaral the characteristics evaluated were: color (L *, a * and b *) and moisture, ash, crude fiber, raw grease, protein, reducing sugars, total sugars and starch. After obtaining the data, an analysis was performed for the variance of test F and comparisons between the means made by the Tukey test at 5% probability. There was no significant difference to the results of luminosity (L *) while BGH 6414 and BGH 5744 showed the highest values for chroma and * BGH 5741, BGH 6414, BGH 7609, 'Amarela de Senador Amaral' BGH 5747 presented the highest chroma values for b *. Clones BGH 7609 and BGH 6414 showed significantly higher levels of dry matter and with the potential yield of agro-industrial processes it would be best suited in the form of frying. The materials that showed significantly larger amounts of ash were BGH 6525, BGH 5747, 'Amarela de Senador Amaral ", BGH 4560, BGH 5746, BGH 6513. Regarding the contents of fatty matter BGH 6525, BGH 5741 and BGH 5744 showed the highest levels. The results of BGH 7609 showed crude fiber significantly higher than the other materials tested, it can be used in diets composed of fibers. BGH 4560 and cultivar had the highest crude protein. BGH 5741 showed the lowest reducing sugar content among the clones, but not significantly different from results found for the cultivar. All clones showed total sugar levels were higher in the cultivar, which may have more flavor. BGH 5741, BGH 5746, BGH 6525 and BGH 6513 showed significantly higher starch content than the cultivar Amarela de Senador Amaral. From these results we conclude that the clones have similar color characteristics, and are potentially a nutritionally adequate substitute for the cultivar.