Sesamoids of the metatarsophalangeal joint of the big toe: a sistematic review

Abstract: The first metatarsal sesamoid bones are not always taken into consideration when making a diagnosis, in pathologies that affect the region of the first metatarsal head. This is due to the insufficient knowledge of all the pathologies that can affect the sesamoids and the relative little incidence that they have. With the increment of sports activities, in particular the running, increasingly affects of the symptoms concerning this region are observed. Methods: A literature search was performed in 5 databases (Medline, PubMed, Scopus, Cochrane Library and BUCEA). The terms included in the search were: sesamoids, anatomy, biomechanics, sesamoids review and sesamoids pathology. In the initial search articles with no more than 10 years, only humans and revision texts are considered. Results: 24 articles were selected and include different pathologies with diagnosis using imaging tests and treatments, both conservative and surgical; as well as aspects from the biomechanics of the metatarsal-sesamoid joint. Conclusion: Sesamoids due of his anatomy, topography and function can be involved in a lot of pathologies; with similar signs and symptoms that can confuse the podiatry when he has to make a correct diagnosis or treatment.

Silicon Promotes Exodermal Casparian Band Formation in Si-Accumulating and Si-Excluding Species by Forming Phenol Complexes

We studied the effect of Silicon (Si) on Casparian band (CB) development, chemical composition of the exodermal CB and Si deposition across the root in the Si accumulators rice and maize and the Si non-accumulator onion. Plants were cultivated in nutrient solution with and without Si supply. The CB development was determined in stained root cross-sections. The outer part of the roots containing the exodermis was isolated after enzymatic treatment. The exodermal suberin was transesterified with MeOH/BF3 and the chemical composition was measured using gas chromatography-mass spectroscopy (GC-MS) and flame ionization detector (GC-FID). Laser ablation-inductively coupled plasma-mass spectroscopy (LA-ICP-MS) was used to determine the Si deposition across root cross sections. Si promoted CB formation in the roots of Si-accumulator and Si non-accumulator species. The exodermal suberin was decreased in rice and maize due to decreased amounts of aromatic suberin fractions. Si did not affect the concentration of lignin and lignin-like polymers in the outer part of rice, maize and onion roots. The highest Si depositions were found in the tissues containing CB. These data along with literature were used to suggest a mechanism how Si promotes the CB development by forming complexes with phenols.

Self-Assembled InAs/GaAs Quantum Dot Solar Cells

Our work focuses on experimental and theoretical studies aimed at establishing a fundamental understanding of the principal electrical and optical processes governing the operation of quantum dot solar cells (QDSC) and their feasibility for the realization of intermediate band solar cell (IBSC). Uniform performance QD solar cells with high conversion efficiency have been fabricated using carefully calibrated process recipes as the basis of all reliable experimental characterization. The origin for the enhancement of the short circuit current density (Jsc) in QD solar cells was carefully investigated. External quantum efficiency (EQE) measurements were performed as a measure of the below bandgap distribution of transition states. In this work, we found that the incorporation of self-assembled quantum dots (QDs) interrupts the lattice periodicity and introduce a greatly broadened tailing density of states extending from the bandedge towards mid-gap. A below-bandgap density of states (DOS) model with an extended Urbach tail has been developed. In particular, the below-bandgap photocurrent generation has been attributed to transitions via confined energy states and background continuum tailing states. Photoluminescence measurement is used to measure the energy level of the lowest available state and the coupling effect between QD states and background tailing states because it results from a non-equilibrium process. A basic I-V measurement reveals a degradation of the open circuit voltage (Voc) of QD solar cells, which is related to a one sub-bandgap photon absorption process followed by a direct collection of the generated carriers by the external circuit. We have proposed a modified Shockley-Queisser (SQ) model that predicts the degradation of Voc compared with a reference bulk device. Whenever an energy state within the forbidden gap can facilitate additional absorption, it can facilitate recombination as well. If the recombination is non-radiative, it is detrimental to solar cell performance. We have also investigated the QD trapping effects as deep level energy states. Without an efficient carrier extraction pathway, the QDs can indeed function as mobile carriers traps. Since hole energy levels are mostly connected with hole collection under room temperature, the trapping effect is more severe for electrons. We have tried to electron-dope the QDs to exert a repulsive Coulomb force to help improve the carrier collection efficiency. We have experimentally observed a 30% improvement of Jsc for 4e/dot devices compared with 0e/dot devices. Electron-doping helps with better carrier collection efficiency, however, we have also measured a smaller transition probability from valance band to QD states as a direct manifestation of the Pauli Exclusion Principle. The non-linear performance is of particular interest. With the availability of laser with on-resonance and off-resonance excitation energy, we have explored the photocurrent enhancement by a sequential two-photon absorption (2PA) process via the intermediate states. For the first time, we are able to distinguish the nonlinearity effect by 1PA and 2PA process. The observed 2PA current under off-resonant and on-resonant excitation comes from a two-step transition via the tailing states instead of the QD states. However, given the existence of an extended Urbach tail and the small number of photons available for the intermediate states to conduction band transition, the experimental results suggest that with the current material system, the intensity requirement for an observable enhancement of photocurrent via a 2PA process is much higher than what is available from concentrated sun light. In order to realize the IBSC model, a matching transition strength needs to be achieved between valance band to QD states and QD states to conduction band. However, we have experimentally shown that only a negligible amount of signal can be observed at cryogenic temperature via the transition from QD states to conduction band under a broadband IR source excitation. Based on the understanding we have achieved, we found that the existence of the extended tailing density of states together with the large mismatch of the transition strength from VB to QD and from QD to CB, has systematically put into question the feasibility of the IBSC model with QDs.

O potencial energético do gradiente térmico na plataforma continental do sul do brasil

O crescimento da demanda energética, prevista para a metade do século XXI, com números embasados no crescimento demográfico e de consumo dos países em desenvol- vimento, sugere a busca por fontes energéticas renováveis e de menor impacto ao meio ambiente, conforme os tratados da política internacional. Portanto, o fornecimento de energia suplementar se torna vital nas sociedades modernas e sua extensão até o mar tem se constituído uma recente preocupação do ponto de vista enérgico e ecológico. Várias formas de conversão de energia foram desenvolvidas no decorrer dos anos, com destaque para a energia dos gradientes térmicos. A Plataforma Continental Sul do Bra- sil (PSCB) possui alta variabilidade espacial e temporal nos campos de temperatura, de forma que existe a necessidade de uma análise das regiões de maior potencial energético com respeito ao gradiente vertical de temperatura. Neste estudo, foram utilizados dados do modelo OCCAM com uma grade de resolu- ção horizontal de 0, 25o e resolução vertical de 66 níveis, distribuídos ao longo de um sistema de coordenadas vertical. Foram utilizadas imagens de temperatura superfícial do mar (TSM) obtidas a partir do sensor AVHRR (Advanced Very High Resolution Ra- diometer) de forma a realizar a validação dos dados do modelo OCCAM. A análise da média dos dados do modelo indicou um sítio energético de maior viabilidade devido oC ao padrão médio do gradiente térmico de aproximadamente 0, 17 ao longo da coluna vertical (545 m de profundidade) no oceano. Neste local, foram coletados os dados, e aplicados a um módulo de conversão de energia térmica dos oceanos que vem sendo desenvolvido na Universidade Federal do Rio Grande - FURG. A região de estudo de- monstrou possuir um local com ótimo potencial energético, onde a produção máxima de energia pode alcançar 111, 9MW , associada com um padrão variabilidade tempo- ral dominante de 12 meses. Este sítio energético demonstra maior eficiência durante o período de verão e outono ao longo dos anos e sua média para todo o período é de 94, 3MW . Neste estudo, duas correntes: Corrente do Brasil (CB) e a Contra Corrente Costeira (CCC), com águas de origem tropical e subantártica com aportes continentais, respecti- vamente, tem alta correlação com os valores dos gradientes térmicos e com os significa- tivos eventos de conversão energética. O sítio energético demonstrou alta estabilidade à sazonalidade e à gama de eventos meteorológicos e oceanográficos, de forma que pode ser qualificado como uma fonte suplementar a matriz energética do país para um futuro próximo.

A multitracer approach to assess the spatial contamination pattern of hake (Merluccius merluccius) in the French Mediterranean

Chemical contamination levels and stable isotope ratios provide integrated information about contaminant exposure, trophic position and also biological and environmental influences on marine organisms. By combining these approaches with otolith shape analyses, the aim of the present study was to document the spatial variability of Hg and PCB contamination of the European hake (Merluccius merluccius) in the French Mediterranean, hypothesizing that local contaminant sources, environmental conditions and biological specificities lead to site-specific contamination patterns. High Hg concentrations discriminated Corsica (average: 1.36 ± 0.80 μg g− 1 dm) from the Gulf of Lions (average values < 0.5 μg g− 1 dm), where Rhône River input caused high PCB burdens. CB 153 average concentrations ranged between 4.00 ± 0.64 and 18.39 ± 12.38 ng g− 1 dm in the Gulf of Lions, whatever the sex of the individuals, whereas the highest values in Corsica were 6.75 ± 4.22 ng g− 1 dm. Otolith shape discriminated juveniles and adults, due to their different habitats. The use of combined ecotracers was revealed as a powerful tool to discriminate between fish populations at large and small spatial scale, and to enable understanding of the environmental and biological influences on contamination patterns.

Early post-fledgling survival in a fragmented population of a tropical cooperative breeding passerine

During the last years tropical forest has been a target of intense study especially due to its recent big scale destruction. Although a lot still needs to be explored, we start realizing how negative can the impact of our actions be for the ecosystem. Subsequently, the living community have been developing strategies to overcome this problem avoiding bottlenecks or even extinctions. Cooperative breeding (CB) has been recently pointed out as one of those strategies. CB is a breeding system where more than two individuals raise one brood. In most of the cases, extra individuals are offspring that delay their dispersal and independent breeding what allows them to help their parents raising their siblings in the subsequent breeding season. Such behavior is believed to be due, per example, to the lack of mates or breeding territories (ecological constraints hypothesis), a consequence of habitat fragmentation and/or disturbance. From this point, CB is easily promoted by a higher reproductive success of group vs pairs or single individuals. Accordingly, during this thesis I explore the early post-fledging survival of a cooperative breeding passerine, namely the impact of individual/habitat quality in its survival probability during the dependence period of the chicks. Our study species is the Cabanis’s greenbul (Phyllastrephus cabanisi), a medium-sized, brownish passerine, classified within the Pycnonotidae family. It is found over part of Central Africa in countries such as Angola, Democratic Republic of the Congo, Mozambique and Kenya, inhabiting primary and secondary forests, as well as woodland of various types up to 2700m of altitude. Previous studies have concluded that PC is a facultative cooperative breeder. This study was conducted in Taita Hills (TH) at the Eastern Arc Mountains (EAM), a chain of mountains running from Southeast Kenya to the South of Tanzania. TH comprises an area of 430 ha and has been suffering intense deforestation reflecting 98% forest reduction over the last 200 years. Nowadays its forest is divided in fragments and our study was based in 5of those fragments. We access the post-fledging survival through radio-telemetry. The juvenile survey was done through the breeding females in which transmitters were placed with a leg-loop technique. Ptilochronology is consider to be the study of feather growth bars and has been used to study the nutritional state of a bird. This technique considers that the feather growth rate is positively proportional to the individual capability of ingesting food and to the food availability. This technique is therefore used to infer for individual/habitat quality. Survival was lowest during the first 5 days post-fledging representing 53.3%. During the next 15 days, risk of predation decreased with only 14.3% more deceased individuals. This represents a total of only 33% survived individuals in the end of the 50 days. Our results showed yet a significant positive relationship between flock size and post-fledging survival as well as between ptilochronology values and post-fledgling survival. In practice, these imply that on this population, as bigger the flock, as greater the post fledging survival and that good habitat quality or good BF quality, will lead to a higher juvenile survival rate. We believe that CB is therefore an adaptive behaviour to the lack of mates/breeding territory originated from the mass forest destruction and disturbance. Such results confirms the critical importance of habitat quality in the post-fledging survival and, for the first time, demonstrates how flock size influences the living probability of the juveniles and therefore how it impacts the (local) population dynamics of this species. In my opinion, future research should be focus in disentangle individual and habitat quality from each other and verify which relationship exist between them. Such study will allow us to understand which factor has a stronger influence in the post-fledging survival and therefore redirect our studies in that direction. In order to confirm the negative impact of human disturbance and forest fragmentation, it would be of major relevance to compare the reproductive strategies and reproductive success of populations living in intact forests and disturbed patches.

Leader Based Cyclic Pursuit

In this work a system of autonomous agents engaged in cyclic pursuit (under constant bearing (CB) strategy) is considered, for which one informed agent (the leader) also senses and responds to a stationary beacon. Building on the framework proposed in a previous work on beacon-referenced cyclic pursuit, necessary and suffi- cient conditions for the existence of circling equilibria in a system with one informed agent are derived, with discussion of stability and performance. In a physical testbed, the leader (robot) is equipped with a sound sensing apparatus composed of a real time embedded system, estimating direction of arrival of sound by an Interaural Level and Phase Difference Algorithm, using empirically determined phase and level signatures, and breaking front-back ambiguity with appropriate sensor placement. Furthermore a simple framework for implementing and evaluating the performance of control laws with the Robot Operating System (ROS) is proposed, demonstrated, and discussed.

Aplicação de peroxidase para degradação de deoxinivalenol

Deoxinivalenol (DON), uma das principais micotoxinas encontradas em matrizes alimentares, é um composto químico que possui em sua estrutura um anel epóxido que lhe confere alto grau de toxicidade. A aplicação de enzimas em processos de degradação de DON vem se destacando, pela estabilidade durante o processo reacional e baixo custo de produção. O objetivo desse trabalho foi estudar o potencial de peroxidase proveniente de farelo de arroz (FA) e farelo de soja (FS) para degradar DON. As condições de obtenção da PO a partir de FA foram definidas por planejamento experimental DCCR 23 , sendo extraída de 5 g de farelo com 50 mL de tampão fosfato 0,04 mol L-1 pH 5, agitados orbitalmente durante 60 min a 100 rpm, e para a PO obtida de FS as condições diferenciaram somente quanto a solução extratora, tampão fosfato 0,01 mol L-1 pH 4,7. A técnica que apresentou melhores índices de purificação para a enzima foi a partição trifásica apresentando fator de purificação e recuperação de 5,6 e 50 % para a obtida de FA e 13,61 e 50 % para FS. A PO de FA apresentou maior atividade em tampão fosfato 5 mmol L-1 pH 5,5 para as formas bruta e pura, diferindo na temperatura de reação de 25 °C e 10 °C, KM de 0,15 e 0,06 mmol L-1 e Vmáx de 769 e 667 U mg-1 , respectivamente. A PO de FS as condições foram: tampão fosfato 5 mmol L-1 pH 5, reação a 35 e 30 °C durante 10 e 5 min, KM de 0,17 e 0,05 mmol L-1 e Vmáx de 196 e 182 U mg-1 , respectivamente. A PO de FA demonstrou maior estabilidade em pH 5 enquanto que a de FS em pH 6, ambas enzimas apresentaram maior estabilidade térmica a 0 °C, as massas moleculares encontradas por eletroforese foram 41 e 34 kDa, respectivamente. Ao final das etapas de obtenção, purificação e caracterização obteve-se uma atividade específica de 116 e 794 U.mg-1 , e 4363 e 17453 U g-1 , respectivamente para PO de FA e FS. A determinação de DON e De-DON foi realizada por HPLC-DAD e LC-ESI-MS/MS para avaliação dos ensaios de degradação. A enzima comercial HRP, mostrou maior potencial de redução sobre DON (55% após 1 h de reação), no entanto em 3 h de reação, a concentração inicial da micotoxina DON foi verificada, o que evidencia que a redução pode ocorrer por adsorção ou por formação de um composto de degradação que apresente a mesma massa molecular. O emprego da enzima PO obtida de FA e FS na degradação necessita de uma avaliação cinética micotoxicologica para definição das condições de redução significativa dos níveis de DON.

Tabu search for the cyclic bandwidth problem

International audience

Consideraciones críticas sobre el prestigio y la diginidad personal y profesional de los bibliotecarios

Esta ponencia expone unas reflexiones sobre el prestigio y la dignidad profesional de la bibliotecología en el estado de Nuevo León, México. Analiza y critica: a) la falta de categorías profesionales en Nuevo León en contraste con la UNAM; menciona también como varios bibliotecologos del IMSS Nuevo Leon lucharon porque se tipificara en el contrato colectivo la categoria de Bibliotecologo Profesional y cuya lucha ganaron; b) las actitudes represoras y dictatoriales por parte de las mafias administrativas y academicas de las principales universidades que no permiten la superacion de las amplias mayorias de bibliotecologos y que censuran la libertad de expresion y pensamiento en Nuevo Leon; c) aboga porque los bibliotecologos deban tener mistica de servicio como si se tratara de un "apostolado" en contra del "monetarismo" o "mercenarismo" que en la actualidad mueve a los bibliotecologos nuevoleoneses. En el aspecto gremial critica la charlataneria y oportunimo demagogico de gremios como los de AMBAC de Nuevo Leon, que se aprovechan de las ineptitudes de los gobiernos en todos los niveles en materia bibliotecaria y utilizan las desgracias naturales apelando a sentimentalismos de la gente solo para salir en la foto y en la prensa, pero sin analizar, criticar ni denunciar las fallas estructurales de fondo del Estado mexicano y de los tres niveles de gobierno. ABSTRACT This paper analyses some reflections about the professional prestige and dignity of librarianship in the state of Nuevo Leon, Mexico. It analyses and criticises: a) the lack of professional categories for librarians with B.A.s or Masters degrees in Nuevo Leon, in contrast, for example with Mexico’s National Autonomous University (UNAM); it also assesses how several librarians with B.A. undergraduate degrees from the Mexican National Institute of Social Security (IMSS) the national health service system) in the Nuevo Leon state-wide fought to obtain a Professional B.A. Undergraduate Degre Librarian Labor Cagegory status to be signed and included in the labor IMSS union collective contract and how eventually they won; b) it also criticises the repressive and dictatorial attitudes on the side of the top managerial and academic mafias from the major Nuevo Leon universities who do not allow free and equal academic and professional development opportunities of the vast majorities of librarians with or without B.A. degrees and whom also censor their freedom of expression and thought in Nuevo Leon librarianship; c) it advocates for librarians to have an honest service mystique as if they were doing a sort of "apostleship" against the "monetarist" and "mercenarist" practices that currently practice librarians in Nuevo Leon state. As for the library guild activities, it criticises the demogogical charlatanism and opportunism of guilds such as AMBAC (standing from the Mexico-wide Mexican Library Association, Nuevo Leon chapter), where their leaders only take advantage of the ineptitudes of the three levels of the Mexican government (municipal, state, and federal) on library issues, and they use the natural disasters against libraries or librarians by appealing to people’s sentimentalisms just to appear themselves in the picture and in the press, but without analysing, criticising and denouncing the deep structural faults underneath the Mexican State, and from all the three levels of the Mexican governments.

Análisis bibliométrico del desarrollo científico de las ciencias sociales en México: 1997-2006.

En el presente trabajo se presentan los resultados de una investigación realizada sobre el Área de las Ciencias Sociales en México del período 1997-2006, para conocer algunas características relevantes como su evolución histórica y productividad científica (I+D) a través del volumen de documentos generados, el idioma de publicación, el índice de productividad cronológica, temática y por Entidad Federativa, los patrones de autoría y coautoría nacionales e internacionales, citación y co-citación entre publicaciones, instituciones y sub-disciplinas científicas (frentes de investigación), entre otros, utilizando para tal fin las técnica de investigación documental: análisis bibliométrico. La producción científica en Ciencias Sociales en el período estudiado representó el 8% del total de la producción mexicana, en Humanidades se logró el 1.50% y en Ciencias Aplicadas se alcanzó el 90.5%, de acuerdo a estimaciones realizadas a través de las bases de datos Citation Index del ISI. ABSTRACT During the period 1997-2006, to learn more about some important features concerning this country's historical development and scientific productivity (R & D) through the volume of documents generated, language of publication, the productivity index chronologically, thematically and by state, the patterns of authorship and national and international co-authorship, citation and co-citation between publications, institutions and sub-disciplines in science (research fronts), among other such indicators-- using the technique of documentary research: bibliometric analysis. For scientific production within the studied period, the field of Social Sciences represented 8% of the total of the Mexican production ; the field of Humanities represented 1,50% ; and the field of Applied Sciences represented 90,5% . These were results derived according to estimations made through the Citation Index data bases of the ISI.

CHARACTERIZATION OF THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE–BASED COMPOSITES FOR FUEL CELL BIPOLAR PLATES AND DEVELOPMENT OF EDUCATIONAL TOOLS IN HYDROGEN AND FUEL CELL TECHNOLOGIES

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi–walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbons’ Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International’s FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through–plane and in–plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in–plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through–plane and in–plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single–filler formulations. For thermal conductivity, Nielsen’s model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen’s model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Modular framework to assess the risk of African swine fever virus entry into the European Union

BACKGROUND The recent occurrence and spread of African swine fever (ASF) in Eastern Europe is perceived as a serious risk for the pig industry in the European Union (EU). In order to estimate the potential risk of ASF virus (ASFV) entering the EU, several pathways of introduction were previously assessed separately. The present work aimed to integrate five of these assessments (legal imports of pigs, legal imports of products, illegal imports of products, fomites associated with transport and wild boar movements) into a modular tool that facilitates the visualization and comprehension of the relative risk of ASFV introduction into the EU by each analyzed pathway. RESULTS The framework's results indicate that 48% of EU countries are at relatively high risk (risk score 4 or 5 out of 5) for ASFV entry for at least one analyzed pathway. Four of these countries obtained the maximum risk score for one pathway: Bulgaria for legally imported products during the high risk period (HRP); Finland for wild boar; Slovenia and Sweden for legally imported pigs during the HRP. Distribution of risk considerably differed from one pathway to another; for some pathways, the risk was concentrated in a few countries (e.g., transport fomites), whereas other pathways incurred a high risk for 4 or 5 countries (legal pigs, illegal imports and wild boar). CONCLUSIONS The modular framework, developed to estimate the risk of ASFV entry into the EU, is available in a public domain, and is a transparent, easy-to-interpret tool that can be updated and adapted if required. The model's results determine the EU countries at higher risk for each ASFV introduction route, and provide a useful basis to develop a global coordinated program to improve ASFV prevention in the EU.

Incidence of debris discs around FGK stars in the solar neighbourhood

Context. Debris discs are a consequence of the planet formation process and constitute the fingerprints of planetesimal systems. Their counterparts in the solar system are the asteroid and Edgeworth-Kuiper belts. Aims. The aim of this paper is to provide robust numbers for the incidence of debris discs around FGK stars in the solar neighbourhood. Methods. The full sample of 177 FGK stars with d ≤ 20 pc proposed for the DUst around NEarby Stars (DUNES) survey is presented. Herschel/PACS observations at 100 and 160 μm were obtained, and were complemented in some cases with data at 70 μm and at 250, 350, and 500 μm SPIRE photometry. The 123 objects observed by the DUNES collaboration were presented in a previous paper. The remaining 54 stars, shared with the Disc Emission via a Bias-free Reconnaissance in IR and Sub-mm (DEBRIS) consortium and observed by them, and the combined full sample are studied in this paper. The incidence of debris discs per spectral type is analysed and put into context together with other parameters of the sample, like metallicity, rotation and activity, and age. Results. The subsample of 105 stars with d ≤ 15 pc containing 23 F, 33 G, and 49 K stars is complete for F stars, almost complete for G stars, and contains a substantial number of K stars from which we draw solid conclusions on objects of this spectral type. The incidence rates of debris discs per spectral type are 0.26^+0.21_-0.14 (6 objects with excesses out of 23 F stars), 0.21^+0.17_-0.11 (7 out of 33 G stars), and 0.20^+0.14_-0.09 (10 out of 49 K stars); the fraction for all three spectral types together is 0.22^+0.08_-0.07 (23 out of 105 stars). The uncertainties correspond to a 95% confidence level. The medians of the upper limits of L_dust/L_∗ for each spectral type are 7.8 × 10^-7 (F), 1.4 × 10^-6 (G), and 2.2 × 10^-6 (K); the lowest values are around 4.0 × 10^-7. The incidence of debris discs is similar for active (young) and inactive (old) stars. The fractional luminosity tends to drop with increasing age, as expected from collisional erosion of the debris belts.

Controlled surface nanotopography and oxygen plasma treatment of PEEK to improve cellular response

Poly(aryl-ether-ether-ketone) (PEEK) is a semi crystalline polymer which exhibits properties that make it an attractive choice for use as an implant material. It displays natural radiolucency, and MRI compatibility, as well as good chemical and sterilization resistance, both of which make it of particular interest in orthopaedic implants. However, PEEK has demonstrated poor cellular adhesion both in vitro and in vivo. This is problematic as implant surfaces that do not develop a layer of adhesive cells are at risk of undergoing fibrous encapsulation, which in turn leads to lack of a strong interface between the implant device and the patient tissue, which can in turn lead to failure of the implant and revision surgery . As incorporating nanotopography into a polymer surface has been demonstrated to be able to direct the differentiation behaviour of stem cells, a possible solution to PEEKs underlying issues with poor cellular response would be to incorporate specific nanoscale topography into the material surface through injection moulding, and then analysing if this is a viable method for addressing PEEKs issues with cellular response. In addition to nanoscale topography, the experimental PEEK surfaces were treated with oxygen plasma to address the underlying cytophobicity of the material. As this type of treatment has been documented to be capable of etching the PEEK surface, experiments were carried out to quantify the effect of this treatment, both on the ability of cells to adhere to the PEEK surface, as well as the effect it has upon the nanotopography present at the PEEK surface. The results demonstrated that there were a range of plasma treatments which would significantly improve the ability of cells to adhere to the PEEK surface without causing unacceptable damage to the nanotopography. Three different types of cells with osteogenic capacity were tested with the PEEK surfaces to gauge the ability of the topography to alter their behaviour: SAOS-2, osteoprogenitors and 271+ MSCs. Due to PEEKs material properties (it is non transparent, exhibits birefringence and is strongly autofluorescent) a number of histological techniques were used to investigate a number of different stages that take place in osteogenesis. The different cell types did display slightly different responses to the topographies. The SAOS-2 cells cultured on surfaces that had been plasma treated for 2 minutes at 200W had statistically significantly higher levels of von Kossa staining on the NSQ surface compared to the planar surface, and the same experiment employing alizarin red staining, showed a statistically significantly lower level of staining on the SQ surface compared to the planar surface. Using primary osteoprogenitor cells designed to look into if whether or not the presence of nanotopography effected the osteogenic response of these cells, we saw a lack of statistically significant difference produced by the surfaces investigated. By utilising HRP based immunostaining, we were able to investigate, in a quantitative fashion, the production of the two osteogenic markers osteopontin and osteocalcin by cells. When stained for osteocalcin, the SQ nanotopography had total percentage of the surface with stained material, average area and average perimeter all statistically significantly lower than the planar surface. For the cells that were stained for osteopontin, the SQ nanotopgraphy had a total percentage of the surface with stained material, average area and average perimeter all highly statistically significantly lower than those of the planar surface. Additionally, for this marker the NSQ nanotopography had average areas and average perimeters that were highly significantly higher than those of the planar surface. There were no significant differences for any of the values investigated for the 271+ MSC’s When plasma treatment was varied, the SAOS-2 cells demonstrated an overall trend i.e. increasing the energy of plasma treatment in turn leads to an increase in the overall percentage of staining. A similar experiment employing stem cells isolated from human bone marrow instead of SAOS-2 cells showed that for polycarbonate surfaces , used as a control, mineralization is statistically significantly higher on the NSQ nanopattern compared to the planar surface, whereas on the PEEK surfaces we observe the opposite trend i.e. the NSQ nanotopography having a statistically significantly lower amount of mineralization compared to the planar surface at the 200W 2min and 30W 1min plasma treatments. The standout trend from the PEEK results in this experiment was that the statistically significant differences on the PEEK substrates were clustered around the lower energy plasma treatments, which could suggest that the plasma treatment disrupted a function of the nanotopograhy which is why, as the energy increases, there are less statistically significant differences between the NSQ nanotopography and the Planar surface This thesis documents the response of a number of different types of cells to specific nanoscale topographies incorporated into the PEEK surface which had been treated with oxygen plasma. It outlines the development of a number of histological methods which measure different aspects of osteogenesis, and were selected to both work with PEEK, and produce quantitative results through the use of Cell Profiler. The methods that have been employed in this body of work would be of interest to other researchers working with this material, as well as those working with similarly autofluorescent materials.