Influência da deformação a frio na recristalização da liga Ti-30Ta para aplicações médicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização petrográfica estrutural e metamorfica das rochas da região de Indiara (GO)

The region Indiara (GO) is located in southwestern of São Francisco Craton in the Internal Zone of the Brasília Belt, western part of the Tocantins Province. In this locality outcrop rocks of the Goiás Magmatic Arc. These rocks are muscovite gneiss with biotite, muscovite-biotite gneiss, biotite gneiss with muscovite and garnet, biotite-muscovite gneiss, muscovite porfiroclastic gneiss, biotite porfiroclastic gneiss, muscovite-quartz schists, garnetquartz schists, and metamafic rock (hornblende schists) as metric or kilometric lenses. The gneisses have granodioritic composition, granoblastic texture, with some portions with lepidoblastic texture, constituting a discontinuous centimeter to millimeter banding; the structure is anisotropic, marked by the preferred orientation of all the minerals. These gneisses are leucocratic, generally are inequigranular and fine to medium grained. The hornblende schists have nematoblastic texture, are inequigranular and fine to medium grained and have anisotropic structure that is given by a foliation, marked by a strong preferential orientation of the crystals of amphibole and other minerals present in the rock. The gneisses of the area are composed of plagioclase (oligoclase/andesine), quartz, microcline, muscovite, biotite, epidote, apatite, zircon, garnet, kyanite, oxides and hydroxides of iron and opaque minerals. And the metamafic rocks of Indiara region are composed mainly of amphibole, plagioclase (oligoclase/andesine), quartz, titanite, biotite, allanite, garnet, oxides and hydroxides of iron, apatite, epidote, rutile, muscovite and opaque minerals. At least three phases of deformation were observed in the rocks of area of study (Dn-1, Dn and Dn +1). The Dn phase and represented by a well-marked foliation Sn having low dip angle (average dip of 20 °) and dip direction to SW (210/21) and to NE (18/20); the Dn-1 phase is represented by a compositional banding (Sn- 1), this banding is generally...

Quimiodectoma de corpo aórtico em cão

Chemodectomas are neoplasms originated from chemoreceptors mainly present on the aortic and carotid bodies. The etiology of this kind of tumor is related to genetic factors and chronic hypoxia. Brachycephalic breeds such as Boxer and Boston Terrier are predisposed to develop this neoplasia. This article reports the case of a 10-year-old female Boxer presented to the Veterinary Hospital of the Veterinary Medicine and Animal Science School in Botucatu with a two-day history of fatigue, exercise intolerance and dyspnea. Clinical signs, in association with radiographic and ultrasonographic findings, suggested a heart-base tumor. The worsening of the case led the owner to choose for euthanasia. Necropsy revealed a mass at the heart base adhered to the aortic body, and microscopic evaluation confirmed the diagnosis of chemodectoma.

Acúmulo de nutrientes e resposta da alface à adubação fosfatada

Nutrient absorption and response of lettuce to phosphorus fertilization. The objective of this study was to evaluate the response of lettuce (cultivar Verônica) to different levels of phosphorus fertilization. The experiment was conducted from 25/09/2003 (sowing) to 03/12/2003 (harvesting) at the Fazenda Experimental São Manuel, UNESP/FCA, Botucatu/SP, under protective structures. The experiment was conducted in a randomized block design, with five treatments (0, 200, 400, 600 and 800kg.ha-1 of P2 O5, in the form of triple superphosphate) and five replications. Plants were grown in 13L plastic pots containing Latossolo Vermelho Distrófico Típico. A quadratic response was observed for the fresh mass of the plant shoots and leaf area, with maximum equivalent levels of 733 and 756kg.ha-1 of P2 O5 , respectively, as well as for potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc accumulation. Linear increases were observed with the treatments of P2 O5 for dry mass of the shoots, leaf number, plant height and nitrogen and phosphorus accumulation.

Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Dispositivo de microdescargas em gases na pressão atmosférica

This work describes the development of an electro-mechanical micro-discharges device operating at ambient condition of pressure and temperature, capable to produce plasma jets for surface finishing. The discharges are produced through a needle shape electrode hollow cathode type by which flows the helium gas. The voltage applied on the electrode is provided for an AC/AC switching voltage converter of full-bridge topology. The converter is energized by a power line of 110/220 VAC, 60 Hz and gives a 1000 V peak-to-peak from 5 kHz to 40 kHz square waveform output. The output frequency is defined by a control signal provided by an external signal generator. The equipment setup includes output acquisition of voltage and current and a photo-detector for photo-electrical measurements, which allows an optical characterization of the plasma jet

Caracterização da liga Ti-30Ta após tratamento biomimético associado à incorporação de antibiótico

Surface treatments have been used to modify the surface of titanium alloys. The purpose of this study is to evaluate the surface of Ti-30Ta alloy after biomimetic approach associated to antibiotic incorporation. The ingots were obtained in arc melting furnace, treated and cold-worked by swaging. The surface treatment was performed in two steps: biomimetic treatment and antibiotic incorporation. For biomimetic treatment, first an alkaline treatment (NaOH 1M at 60ºC) was performed, followed by heat treatment and immersion in SBFx5 (Simulated Body Fluid) for a period of 24 hours. In order to incorporate the antibiotic, samples were immersed in a solution formed by drugs plus SBFx5 for 48 hours. The sample surfaces were analyzed by scanning electron microscopy (SEM), X-Ray diffraction (XRD), atomic force microscopy (AFM) and contact angle measurements. The release of antibiotic from coated implants was measured in phosphate buffer saline at pH 7.4 by using UV/VIS spectrometry. Results have shown changes on the surface after incorporating the drug, which is gradually co-precipitated with the Ca-P crystals, forming a uniform and rough layer on the metal surface

Caracterização da liga Ti-15Zr visando aplicações biomédicas

With advances in health care, has been na increase of demand for material that could replace the functions of the human body parts, thus evolved biomedic prosthesis which today are responsible for the constant improvement of the quality of life. The Titanium alloys are widely used as implants due to its properties, like high mechanical resistance, biocompatibility and corrosion resistance, and the addition alloying elements like Zirconium, may improve some of those properties. Such properties are related to the microstructure and consequently to the type of processing performed. The purpose of this dissertation was to characterize the experimental alloy Ti15Zr after route of processsing and heat treatment in order to extend the knowledge about this alloy. The latter has been abtained by fusion of pure metals in a arc melting furnace with an inert argon atmosphere. The material has been homogenized in a tube furnace at 950ºC for 24h and cold worked by swaging, after that, bars with 10 mm of diameter were obtained by the process of rotary forging. The samples were solubilized at 900º C for 2 hours and quenched in water. After that, 4 samples were submitted to the aging, at 400º C, 450º C, 500º C and 550º C. The microstructure and phase analysis was done by optical microscopy and X-rays diffraction (XRD), the mechanical characterization was carried out by microhardness test and finally, evaluation of corrosion resistance of the alloy by electrochemical tests. The XRD and the optical microscopy made it possible to analyze that the heat treatment influenced the phase shifting from α to α', and probably affected the alloy hardness, at the first aged sample at 500º Chas been a sudden increase in the value of hardness, probably by appearance of omega phase, unwanted phase to the medical application duo to great fragility, and finally ... (Complete abstract click electronic access below)

Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Dispositivo de microdescargas em gases na pressão atmosférica

This work describes the development of an electro-mechanical micro-discharges device operating at ambient condition of pressure and temperature, capable to produce plasma jets for surface finishing. The discharges are produced through a needle shape electrode hollow cathode type by which flows the helium gas. The voltage applied on the electrode is provided for an AC/AC switching voltage converter of full-bridge topology. The converter is energized by a power line of 110/220 VAC, 60 Hz and gives a 1000 V peak-to-peak from 5 kHz to 40 kHz square waveform output. The output frequency is defined by a control signal provided by an external signal generator. The equipment setup includes output acquisition of voltage and current and a photo-detector for photo-electrical measurements, which allows an optical characterization of the plasma jet

Caracterização da liga Ti-30Ta após tratamento biomimético associado à incorporação de antibiótico

Surface treatments have been used to modify the surface of titanium alloys. The purpose of this study is to evaluate the surface of Ti-30Ta alloy after biomimetic approach associated to antibiotic incorporation. The ingots were obtained in arc melting furnace, treated and cold-worked by swaging. The surface treatment was performed in two steps: biomimetic treatment and antibiotic incorporation. For biomimetic treatment, first an alkaline treatment (NaOH 1M at 60ºC) was performed, followed by heat treatment and immersion in SBFx5 (Simulated Body Fluid) for a period of 24 hours. In order to incorporate the antibiotic, samples were immersed in a solution formed by drugs plus SBFx5 for 48 hours. The sample surfaces were analyzed by scanning electron microscopy (SEM), X-Ray diffraction (XRD), atomic force microscopy (AFM) and contact angle measurements. The release of antibiotic from coated implants was measured in phosphate buffer saline at pH 7.4 by using UV/VIS spectrometry. Results have shown changes on the surface after incorporating the drug, which is gradually co-precipitated with the Ca-P crystals, forming a uniform and rough layer on the metal surface

Caracterização da liga Ti-15Zr visando aplicações biomédicas

With advances in health care, has been na increase of demand for material that could replace the functions of the human body parts, thus evolved biomedic prosthesis which today are responsible for the constant improvement of the quality of life. The Titanium alloys are widely used as implants due to its properties, like high mechanical resistance, biocompatibility and corrosion resistance, and the addition alloying elements like Zirconium, may improve some of those properties. Such properties are related to the microstructure and consequently to the type of processing performed. The purpose of this dissertation was to characterize the experimental alloy Ti15Zr after route of processsing and heat treatment in order to extend the knowledge about this alloy. The latter has been abtained by fusion of pure metals in a arc melting furnace with an inert argon atmosphere. The material has been homogenized in a tube furnace at 950ºC for 24h and cold worked by swaging, after that, bars with 10 mm of diameter were obtained by the process of rotary forging. The samples were solubilized at 900º C for 2 hours and quenched in water. After that, 4 samples were submitted to the aging, at 400º C, 450º C, 500º C and 550º C. The microstructure and phase analysis was done by optical microscopy and X-rays diffraction (XRD), the mechanical characterization was carried out by microhardness test and finally, evaluation of corrosion resistance of the alloy by electrochemical tests. The XRD and the optical microscopy made it possible to analyze that the heat treatment influenced the phase shifting from α to α', and probably affected the alloy hardness, at the first aged sample at 500º Chas been a sudden increase in the value of hardness, probably by appearance of omega phase, unwanted phase to the medical application duo to great fragility, and finally ... (Complete abstract click electronic access below)

Limitations in activities of people affected by leprosy after completing multidrug therapy: application of the SALSA scale

Objectives: To identify people affected by leprosy with impairments after completing multidrug therapy for leprosy, and to assess their limitations in conducting daily activities by applying the Screening of Activity Limitation and Safety Awareness (SALSA) scale. Methods: A cross-sectional study was performed of all residents of a medium-sized city who were treated for leprosy from 1998 to 2006. A specific questionnaire was applied to obtain general and clinical data and the SALSA scale was used to assess limitations in activities. Impairments were assessed using the 'World Health Organization leprosy disability grading system' (WHO-DG). Findings: Of the 335 people affected by leprosy treated in the period, 223 (62.1%) were located and interviewed. A total of 51.6% were female with a mean age of 54 years (SD +/- 15.72) and 67.9% had up to 6 years formal education. The borderline form predominated among interviewees (39.9%) and 54.3% suffer from associated diseases with hypertension (29.1%) and diabetes (10.3%) being the most common. Pain was reported by 54.7% of interviewees. By multiple logistic regression analysis, associations were found between limitations in activities and being female (P < 0.025), family income <= 3 minimum wages (P-value < 0.003), reports of major lesions (P-value < 0.004), pain (P-value < 0.001), associated diseases (P-value < 0.023) and the WHO-DG (P-value < 0.001). Disabilities, as identified using the WHO-DG, were less common (32%) than limitations in activities as evaluated by the SALSA scale (57.8%). Conclusion: Limitations in activities proved to be common in people affected by leprosy and were. associated with low income, being female, reported major lesions, disability, disease and pain.

Spatial analysis of leprosy incidence and associated socioeconomic factors

OBJECTIVE: To identify clusters of the major occurrences of leprosy and their associated socioeconomic and demographic factors. METHODS: Cases of leprosy that occurred between 1998 and 2007 in Sao Jose do Rio Preto (southeastern Brazil) were geocodified and the incidence rates were calculated by census tract. A socioeconomic classification score was obtained using principal component analysis of socioeconomic variables. Thematic maps to visualize the spatial distribution of the incidence of leprosy with respect to socioeconomic levels and demographic density were constructed using geostatistics. RESULTS: While the incidence rate for the entire city was 10.4 cases per 100,000 inhabitants annually between 1998 and 2007, the incidence rates of individual census tracts were heterogeneous, with values that ranged from 0 to 26.9 cases per 100,000 inhabitants per year. Areas with a high leprosy incidence were associated with lower socioeconomic levels. There were identified clusters of leprosy cases, however there was no association between disease incidence and demographic density. There was a disparity between the places where the majority of ill people lived and the location of healthcare services. CONCLUSIONS: The spatial analysis techniques utilized identified the poorer neighborhoods of the city as the areas with the highest risk for the disease. These data show that health departments must prioritize politico-administrative policies to minimize the effects of social inequality and improve the standards of living, hygiene, and education of the population in order to reduce the incidence of leprosy.

Conservação de sementes de ipê-roxo

O objetivo desta pesquisa foi estudar o comportamento fisiológico de sementes de ipê-roxo (Tabebuia heptaphylla (Vell.) Toledo) durante o amazenamento. Frutos colhidos manualmente de 15 plantas-matrizes foram colocados em ambiente sombreado para secagem complementar e posterior extração manual das sementes; primeiro, determinou-se o grau de umidade inicial das sementes (15,6%) e, em seguida, as sementes remanescentes foram submetidas a secagem para obtenção dos demais graus de umidade desejados (11,5, 8,0 e 4,3%). As amostras correspondentes aos diferentes graus de umidade foram armazenadas em câmaras, na temperaturas de 10, 20 e -196 °C. No início e após 120, 240 e 360 dias de armazenamento, as sementes foram submetidas a diversas avaliações fisiológicas. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial, com 4 tratamentos (grau de umidade) no início do armazenamento e 12 tratamentos (4 grau de umidade x 3 condições térmicas), em cada época de avaliação, durante o armazenamento. A comparação das médias foi realizada pelo Teste de Tukey a 5%. A conservação das sementes de ipê-roxo com teores de água de 15,6, 11,5, 8,1 e 4,3% é favorecida no armazenamento a 10 e -196 °C.