脉冲激光相变硬化中的二维点阵光强分布设计

激光强度空间分布是影响脉冲激光相变硬化效果的重要因素。现有的二维点阵光束按强度均匀分布设计,不能完全满足应用要求。为此提出基于有限元(FE)分析的光强空间分布逆向设计思路,并给出了实现方法。建立脉冲激光相变硬化有限元模型,考虑了材料热物性参数随温度的变化和相变过程,并用实验进行校核。研究了二维点阵分布参数对温度场的影响,从目标温度场和硬化层形貌出发对二维点阵的分布参数进行调整,获得优化的强度空间分布。针对汽车冲压模具表面强化的工艺要求,应用此方法设计出具有实用价值的激光强度空间分布。

人工神经网络技术在成形模具表面激光强化中的应用

基于人工神经网络基本理论，建立在成形模具表面激光强化中预测材料表面最高温度、强化效果的BP网络模型。借助于MATLAB仿真软件中的神经网络工具箱作为开发平台，将试验样本数据和经过试验验证的数值计算结果作为补充的样本数据用于BP网络的训练，利用训练好的BP网络对非线性的样本数据规律进行拟合，实现激光加工工艺参数的优化，为实际生产和加工提供有效的依据。

激光强化温度场的数值模拟与校验

采用MSC．Mare非线性有限元软件，对激光强化过程中的温度场进行数值模拟，分析了能量密度的变化对激光强化效果的影响。通过温度传感器测量激光强化时材料表面温度的变化来验证数值模拟的结果。模拟值与实测值基本吻合。结果表明，数值模拟结果可作为激光加II艺参数选择的依据。

非转移弧层流等离子体射流铸铁表面熔凝强化

用大气压非转移弧层流等离子体射流,对W-Mo-Cu铸铁表面进行熔凝相变强化处理,观察和测试了试样经不同弧电流处理后的表面层组织、硬度、耐磨性.结果表明,层流等离子体射流对铸铁表面的局部快速加热熔化和冷却凝固,明显改变了表面层的微观组织,提高了硬度和抗磨损性能.

Thermal Residual Stresses in SiCw/Al Composite

<正> The SiCw/6061Al composites were fabricated by squeeze casting method. Varia-tions of thermal residual stresses with quenching temperature, cooling manner, aging time and thethermal-cold cycle process in thin specimens,and the distributions of thermal residual stresses alongthe distances from the surface and changes with heating temperatnres in thick specimens were stud-ied by means of X-ray diffraction (XRD). The effects of residual stresses on the mierostructure, di-mensional stability and age-hardening behavior were studied by SEM, TEM observations, and tensiletest. The results showed that there existed macrostress, microstress and thermal mismatch stress inSiCw/Al compo-site,and the presence of microstress and thermal mismatch stress has no influenceon the measurement of macrostress, but the macrostress can affect the measured value of thermalmismatch stress. Thermal res dual stress induced during the composite fabrication process, will be further in-creased when the composite were subjected to the e

Microstructure Evolution of Laser Pulse processed Ductile Iron Surface

Pulsed laser beam was used to modify surface processing for ductile iron. The microstructures of processed specimen were observed using optical microscope (OM). Nanoindentation and micro-hardness of microstructures were measured from surface to inner of sample. The experimental results show that, modification zone is consisted of light melted zone, phase transformation hardening area and transient area. The light melt area is made up of coarse dendrite crystalline with a thickness less than 20um, phase transformation hardening area mainly of laminal or acicular martensite, retained austenite and graphite, i.e. M+A prime+ G. The cow-eye microstructure around graphite sphere always is formed in phase transformation hardening area zone, which consisting of a variety structure with the distance from the surface. So, it maybe as a obvious sign distinguishing modification zone border. Finally, the microstructures evolution of laser pulse processed ductile iron was analyzed coupling with beam energy distribution in space and laser pulse heating procession characteristics. The analysis shows that energy distribution of laser pulse has an important effect on microstructure during laser pulse modified ductile iron. Multi-scale and interlace arrangement are the important features for laser pulse modified ductile iron. Of microstructure.

Study of the damage-induced anisotropy of quasi-brittle materials using the component assembling model

Damage-induced anisotropy of quasi-brittle materials is investigated using component assembling model in this study. Damage-induced anisotropy is one significant character of quasi-brittle materials coupled with nonlinearity and strain softening. Formulation of such complicated phenomena is a difficult problem till now. The present model is based on the component assembling concept, where constitutive equations of materials are formed by means of assembling two kinds of components' response functions. These two kinds of components, orientational and volumetric ones, are abstracted based on pair-functional potentials and the Cauchy - Born rule. Moreover, macroscopic damage of quasi-brittle materials can be reflected by stiffness changing of orientational components, which represent grouped atomic bonds along discrete directions. Simultaneously, anisotropic characters are captured by the naturally directional property of the orientational component. Initial damage surface in the axial-shear stress space is calculated and analyzed. Furthermore, the anisotropic quasi-brittle damage behaviors of concrete under uniaxial, proportional, and nonproportional combined loading are analyzed to elucidate the utility and limitations of the present damage model. The numerical results show good agreement with the experimental data and predicted results of the classical anisotropic damage models.

Respuesta a la sequía de Pinus radiata D. Don y su implicación en los procesos de tolerancia

160 p. (Bibliogr. 141-160)

柔性加工中高功率激光束空间变换研究

在国民经济中占有重要地位的汽车工业中，对于大型覆盖件模具的表面强化处理，最常见的是火焰淬火。火焰淬火对操作人员的要求高，可控性差，效果不理想，但是由于一直没有适合的方法，目前也只能继续使用。而激光表面强化技术结合柔性加工系统正是解决这类问题的新途径。传统的激光表面强化是采用把激光束离焦后进行扫描的方式，这种方法不能充分利用激光功率密度，而且往往要用转镜或振镜形成条形光斑来加快处理速度，这就需要复杂的机械结构，而且产生难以避免的重叠回火。我们提出一种新方法，利用二元光学元件来获得一种新型的周期光强分布，实现其在高功率激光系统中的应用，并设计成为集成到柔性加工系统中的组成部分，能够完成对大、中型模具表面的激光强化处理。本论文的工作主要是有关激光柔性加工系统中的光束传输及变换子系统，不仅包括理论设计、加工制作，同时还包括把该子系统有效的结合到整个系统中。本研究工作广泛涉及激光理论，光束变换和光纤传输，系统中的模块化集成应用技术，金属材料的特殊分布光强表面改性试验研究等等，是跨学科的交叉研究工作。在本论文中，重点是二元光学元件的设计方法的选择、计算机辅助设计的实现、二元光学元件的制作和在高功率激光传输中的应用，以及特殊光强分布应用于金属表面改性中的相关工作。通过把二元光学元件引入到高功率激光加工中，对出现的新现象给出一定的预测和分析，并获得了良好的强化结果，最终实现了系统的集成化，并具有实际生产所要求的可靠性和灵活性。本论文共分六章，主要包括两方面的内容。第一章为绪论，第六章为结论。第一方面内容在第二章到第四章中说明，是用于高功率激光应用中的二元光学元件的原理、设计和制作。第二方面的内容在第五章中，是关于应用前面设计制作的二元光学元件，在实际的金属材料表面处理中的实验研究，给出了相关试验结果。

Critical current anisotropy in high temperature superconductors

After nearly 15 years of research effort, High Temperature Superconductors (HTS) are finding a wide range of practical applications. A clear understanding of the factors controlling the current carrying capacity of these materials is a prerequisite to their successful technological development. The critical current density (Jc) in HTS is directly dependent on the structure and pinning of the Flux Line Lattice (FLL) in these materials. This thesis presents an investigation of the Jc anisotropy in HTS. The use of thin films grown on off c-axis (vicinal) substrates allowed the effect of current directions outside the cuprate planes to be studied. With this experimental geometry Berghuis, et al. (Phys. Rev. Lett. 79, 12, pg. 2332) observed a striking flux channelling effect in vicinal YBa2Cu3O7-δ (YBCO) films. By confirming, and extending, this observation, it is demonstrated that this is an intrinsic effect. The results obtained, appear to fit well with the predictions of a field angle dependent cross-over from a three dimensional rectilinear FLL to a kinked lattice of strings and pancakes. The pinning force density for movement of strings inside the cuprate planes is considerably less than that on vortex pancake elements. When the FLL is entirely string-like this reduced pinning leads to the observed channelling minima. It is observed that anti-phase boundaries enhance the Jc in vicinal YBCO films by strongly pinning vortex strings. The effect on the FLL structure cross-over of increasing anisotropy has been elucidated using de-oxygenated vicinal YBCO films. Intriguingly, the counter intuitive prediction that the range of applied field angle for which the kinked lattice is fully developed reduces with increasing anisotropy, appears to be confirmed. Although vortex channelling cannot be observed in c-axis YBCO films, the pinning force density for vortex string channelling has been extracted by observing string dragging. By studying the effect of rotating the applied field at a constant angle to the cuprate planes, it is possible to observe the cross-over into the string pancake regime in c-axis films. In the 3D region, the observed behaviour is well explained by the anisotropic Ginzburg-Landau model. Measurements were also made on thin films of the much more anisotropic Bi 2Sr2CaCu2O8+x material, grown on vicinal substrates. The absence of any flux channelling effect and clear adherence to the expected Kes-Law behaviour in the observed Jc characteristics does not provide evidence for the existence of the predicted ‘crossing lattice’ in Bi 2Sr2CaCu2O8+x .

Cyclic Deformation Of Nanocrystalline And Ultrafine-Grained Nickel

The cyclic deformation behavior Of ultrafine-grained (UFG) Ni samples synthesized by the electrodeposition method was studied. Different from those made by severely plastic deformation, the UFG samples used in this study are characterized by large-angle grain boundaries. Behaviors from nanocrystalline Ni and coarse-grained Ni samples were compared with that Of Ultrafine-grained Ni. With in situ neutron diffraction. unusual evolutions of residual lattice strains as well as cyclic hardening and softening behavior were demonstrated during the cyclic deformation. The microstructural changes investigated by TEM are discussed with respect to the unusual lattice strain and cyclic hardening/softening. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Orientation-Dependent Adhesion Strength Of A Rigid Cylinder In Non-Slipping Contact With A Transversely Isotropic Half-Space

Recently, Chen and Gao [Chen, S., Gao, H., 2007. Bio-inspired mechanics of reversible adhesion: orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials. J. Mech. Phys. solids 55, 1001-1015] studied the problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic solid subjected to an inclined pulling force. An implicit assumption made in their study was that the contact region remains symmetric with respect to the center of the cylinder. This assumption is, however, not self-consistent because the resulting energy release rates at two contact edges, which are supposed to be identical, actually differ from each other. Here we revisit the original problem of Chen and Gao and derive the correct solution by removing this problematic assumption. The corrected solution provides a proper insight into the concept of orientation-dependent adhesion strength in anisotropic elastic solids. (c) 2008 Elsevier Ltd. All rights reserved.

MeV金离子辐照聚苯乙烯微球的各向异性形变

在低温条件下用Au离子辐照法实现了聚苯乙烯(PS)微球的各向异性形变.PS微球在离子辐照下呈现出不同于SiO2微球的形变特点.照后PS微球整体收缩,在平行于离子入射方向上收缩尤甚,使照后PS微球呈长轴垂直与离子入射方向的椭球.采用加掩膜辐照法,在同一晶体上特定区域实现微球的形变.此工作为重离子辐照在光子晶体中引入可控缺陷奠定了基础.

具有特定光强分布的激光表面硬化技术

利用光束变换技术得到不同光斑形状和不同强度分布的光束,可满足表面硬化所需要的硬化层均匀性等要求.激光硬化在材料表面产生的实际效果与光强分布密切相关,利用特定光强分布的光束进行激光硬化可以得到所需要的温度场及组织分布,直接影响材料表面硬化的效果.对高斯光束圆光束、平顶矩形光束、曲边矩形光束、点阵光斑等不同强度分布的激光表面硬化(LSH)技术进行了介绍.硬化层特定的硬度分布及组织结构等硬化效果是特定光强分布激光束与材料相互作用的结果,要获得所需硬化效果,则需要利用反求方法设计与硬化效果相对应的特定光强分布的光斑.给出了特定光强分布的激光表面硬化技术的发展趋势.

Random response of nonlinear continuous systems

This thesis presents a technique for obtaining the stochastic response of a nonlinear continuous system. First, the general method of nonstationary continuous equivalent linearization is developed. This technique allows replacement of the original nonlinear system with a time-varying linear continuous system. Next, a numerical implementation is described which allows solution of complex problems on a digital computer. In this procedure, the linear replacement system is discretized by the finite element method. Application of this method to systems satisfying the one-dimensional wave equation with two different types of constitutive nonlinearities is described. Results are discussed for nonlinear stress-strain laws of both hardening and softening types.