Deinking flotation of recycled linerboard for food packaging applications

Brown packaging linerboard, made entirely from recovered pulp, was subjected to deinking flotation for evaluating the possible improvements in its chemical, optical and mechanical properties. The increase in the rate of recovered paper utilisation, along with the tendency towards lower basis weights, in the packaging paper production, has created a growing need for the utilisation of secondary fibers of improved quality. To attain better quality fibers, flotation deinking of brown grades is being considered, along with the addition of primary fibers to recovered paper furnish. Numerous conducted studies, in which the flotation technology was used in the treatment of brown grades, support this idea. Most of them show that the quality of fibers is improved after flotation deinking, resulting in higher mechanical properties of the deinked handsheets and in lower amounts of chemical contaminants. As to food and human health safety, packaging paper has to meet specific requirements, to be classified as suitable for its direct contact with foods. Recycled paper and board may contain many potential contaminants, which, especially in the case of direct food contact, may migrate from packaging materials into foodstuffs. In this work, the linerboard sample selected for deinking was made from recycled fibers not submitted previously to chemical deinking flotation. Therefore, the original sample contained many noncellulosic components, as well as the residues of printing inks. The studied linerboardsample was a type of packaging paper used for contact with food products that are usually peeled before use, e.g. fruits and vegetables. The decrease in the amount of chemical contaminants, after conducting deinking flotation, was evaluated, along with the changes in the mechanical and optical properties of the deinked handsheets. Food contact analysis was done on both the original paper samples and the filter pads and handsheets made before and after deinking flotation. Food contact analysis consisted of migration tests of brightening agents, colorants, PCPs, formaldehydes and metals. Microbiological tests were also performed to determine the possible transfer of antimicrobial constituents

Alarma per acceleració implementada sobre LPC1769 i controlada des de dispositius Android

Aquest PFC implementa el control d'una alarma activada per acceleració. S'ha realitzat sobre la placa LPC1769 i el sistema FreeRTOS. El projecte permet controlar l'alarma des de dispositius Android, a través d'un servidor intermedi que s'encarrega de la comunicació.

Fabrication technology and applications of fiber Bragg gratings

In this thesis theoretical and technological aspects of fiber Bragg gratings (FBG) are considered. The fabrication of uniform and chirped fiber Bragg gratings using phase mask technique has been exploited throughout this study. Different requires of FBG inscription were considered and implemented experimentally to find economical and effective procedure. The hydrogen loading was used as a method for enhancement the photosensitivity of the fiber. The minimum loading time for uniform and chirped fiber Bragg gratings was determined as 3 days and 7 days at T = 50°C and hydrogen pressure 140 bar, respectively. The post-inscription annealing was considered to avoid excess losses induced by the hydrogen. The wavelength evolution during annealing was measured. The strain and temperature sensor application of FBG was considered. The wavelength shifts caused by tension and temperature were studied for both uniform and chirp fiber Bragg gratings.

Pub Swap

Treball que descriu com hem programat l'aplicació PubSwap des de la part de la base de dades fins a l'aplicació en Android.

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 1).

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been used successfully in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits; to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles.

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 2).

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been successfully used in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits, to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles.

Statistical hypothesis testing and common misinterpretations: should we abandon p-value in forensic science applications?

Many people regard the concept of hypothesis testing as fundamental to inferential statistics. Various schools of thought, in particular frequentist and Bayesian, have promoted radically different solutions for taking a decision about the plausibility of competing hypotheses. Comprehensive philosophical comparisons about their advantages and drawbacks are widely available and continue to span over large debates in the literature. More recently, controversial discussion was initiated by an editorial decision of a scientific journal [1] to refuse any paper submitted for publication containing null hypothesis testing procedures. Since the large majority of papers published in forensic journals propose the evaluation of statistical evidence based on the so called p-values, it is of interest to expose the discussion of this journal's decision within the forensic science community. This paper aims to provide forensic science researchers with a primer on the main concepts and their implications for making informed methodological choices.

Population ageing and ICT: An exploratory review of technology innovation trough digital applications

The multidimensional process of physical, psychological, and social change produced by population ageing affects not only the quality of life of elderly people but also of our societies. Some dimensions of population ageing grow and expand over time (e.g. knowledge of the world events, or experience in particular situations), while others decline (e.g. reaction time, physical and psychological strength, or other functional abilities like reduced speed and tiredness). Information and Communication Technologies (ICTs) can help elderly to overcome possible limitations due to ageing. As a particular case, biometrics can allow the development of new algorithms for early detection of cognitive impairments, by processing continuous speech, handwriting or other challenged abilities. Among all possibilities, digital applications (Apps) for mobile phones or tablets can allow the dissemination of such tools. In this article, after presenting and discussing the process of population ageing and its social implications, we explore how ICTs through different Apps can lead to new solutions for facing this major demographic challenge.

Voting advice applications : impact on voting decisions in the 2011 Swiss national elections

In most democracies voting Advice Applications (VAAs) advising citizens which candidate or party they should vote for become more and more popular. It is therefore crucial to know more about the functioning and the effects of such tools. After some general remarks about the spread of these tools and their possible effects gathered so far in various studies, this paper presents the latest results from a research conducted in the course of the 2011 Swiss national elections. They confirm that VAAs can lead to better informed voters and are likely to have a positive impact on electoral turnout. Additionally it can be shown that the Swiss VAA smartvote made voters change their voting intention and that they voted for a different party. This was particularly advantageous for the Green Liberal Party. At the moment, only a minority of voters rely on the voting recommendation by smartvote. This might change dramatically with the introduction of e-voting. Once people can vote electronically, there are hardly any possibilities to prevent voters from transferring their selection of candidates based on the recommendation given by a VAA into the official electronic ballot paper. If this is possible, e-voting will become more popular than postal voting.

Split message-based anonymity for JXTA applications

JXTA is an open peer-to-peer (P2P) protocols specification that, in its about 10 years of history, has slowly evolved to appeal to a broad set of applications. As part of this process,some long awaited security improvements have been included in the latest versions. However, under some contexts, even more advanced security requirements should be met, such as anonymity. Several approaches exist to deploy anonymity in P2P networks, but no perfect solution exists. Even though path-based approaches are quite popular, it is considered that, in dynamicgroups, using a split message-based one is better. In this work, we propose an anonymity service for JXTA using such approach. The proposal takes advantage JXTA's core services, in a manner so that it can be easily integrated to existing end applications and services.

El temps de Meteomar

L'objectiu principal del projecte consisteix en el desenvolupament d'una aplicació per a dispositius Android que permeti oferir prediccions meteorològiques a curt i mig termini, predicció detallada per municipi, dades de les estacions en temps real, servei d'alertes/avisos, petició de certificacions de fenòmens meteorològics adversos i predicció a la carta.

Proposta per a la mobilitat en transport públic : MoveOnApp

This paper wants to show a solution for mobility in public transport. Nowadays, the high number of mobile devices with wireless geolocation and Internet data connection has become commonly used tools, as well as partial solutions to facilitate public transport focused on one means of transport (Bus, Underground ...). We collect information from public transport (means of transport, routes, schedules, fare information ...) and adapt it to different users (residents, visitors, public service staff ...). MoveOnApp is the solution adapting its user interface: finding nearby stops, planning a route, knowing schedules or real time service (connecting to the available services), or showing the route of the line. The system could incorporate new cities and regions, or new means of transport with updating service; at first we offered information of public transport from Palma (Majorca Island, Spain): moveOn Palma.