慢生大豆根瘤菌(Bradyrhizobiumjaponicum)聚羟丁酸合成酶基因(phbC)的克隆和序列测定

以苜蓿根瘤菌Rm10 2 1的 phaC基因突变体菌株Rm1114 4 (phaC ::Tn5 - 2 33)为受体菌 ,通过功能互补 ,成功地从构建的Bradyrhizobium japonicum USDA110基因文库中 ,筛查到能与Rm1114 4互补 ,使之恢复在以乙酰乙酸为唯一碳源的M9培养基 (M9-AA)平板上 5d形成明显可见菌落 ,以及在MOPS平板上形成粘液型菌落的表型的重组粘粒 pDC2 ;经证实 ,该粘粒带有 phbC基因 .完成了该基因的全序列测定并已在GenBank登记 ,登记号为AY0 775 80 .B .japonicumphbC基因由 180 3碱基对组成 ,GC含量 6 1.8% ,AT含量 38.2 % ;编码 6 0 0个氨基酸 ,Mr=6 6 .95× 10 3 .图 3表 3参 13

苜蓿根瘤菌聚羟丁酸解聚酶基因(phbD)突变体的构建及其特性

根据苜蓿根瘤菌(Sinorhizobiummeliloti )Rm1021基因组中与RalstoniaeutrophaphaZ基因同源部分序列设计1对引物,从S.meliloti基因组中用PCR扩增出835bpphbD 基因片段并克隆到载体pGEM-TEasy上;通过在phbD基因内插入ΩSmSp和基因置换构建了phbD突变体。该突变体可积累比野生型菌株多1.0~2.6倍的聚羟丁酶(PHB)。在YMA和TY平板上形成非粘液型菌落,而在以乙酰乙酸或3-羟丁酸为唯一碳源的M9基本培养基(M9-AA,M9-HB)上形成粘液型菌落。碱性磷酸酶测定结果表明,通过接合引入phbD突变体菌株中的exoF-phoA融合基因在YMB培养基中低量表达,而在M9-AA和M9-HB中高量表达。

拓扑异构酶的结构、功能与进化的结构生物信息学研究

拓扑异构酶（topoisomerase）是一类控制和修改双螺旋DNA复制和转录过程中的拓扑结构的酶，是生命活动中最重要的酶。以IA类和II类拓扑异构酶中共存的toprim以及CAP-like结构域为研究对象，对拓扑异构酶中的三大类酶的分子进化情况进行了分析。结果显示在IA类和II类酶之间序列保守性很低，但是具有两个保守的结构域，在IIB类拓扑异构酶中toprim结构域中存在着和其他toprim结构域相同的四个保守位点，而在CAP-like结构域中IA类和II类中存在较大差异，没有明显的序列保守性，IIB类和IIA类的CAP-like结构域在二级结构上非常相似。从toprim结构域系统进化研究中我们发现IIA类和皿类中toprim结构域的进化关系很近，两类酶的toprim结构域在亲缘关系上和primase较远，而以上三者和IA类的进化关系最远。CAP-like结构域的系统进化研究发现IIA类以及IA类的domain4的CAP-like结构域进化关系比较近，IIB类和他们之间关系稍微远一些，IA类的domain3和以上几个结构域的关系较远，这也与他们的二级结构上的一致性是相同的。通过分析，IIA、IIB类起源于类似IA类的古老的拓扑异构酶，'在IA类进化中经过基因复制产生了两个不同的CAP-like结构域。然后祖先拓扑异构酶发生了变化，N'端加入了ATPase结构域和DNAgyrase/Mutlsecond结构域，形成了严格依赖ATP供能的真核生物IIA类，在细菌中断开成为两个亚基的细菌中IIA类。IIB类是祖先细胞的IIA类的一个或者是两个亚单位在古细菌以及真核生物中通过复制、重组和缺失造成的，IIB类中的toprim结构域很接近IIA类，可以认为，llB类中的toPrim结构域直接由IIA类转移而来，而IIB类中的cAP一1汰e结构域较IIA类中产生更早一些，应该是由拓扑异构酶祖先中产生的二级结构为aβaaββ的CAP-like结构域直接进化而来。然而，两个结构域的基因在连接到一起时候发生了不同于一般顺序的拼接，于是nB类中两个结构域形成了不同于现在的IA类和IIA类的顺序。

Synthesis and properties of two kinds of CPVC carboxylated ionic copolymers

In the present work, two kinds of CPVC carboxylated ionic copolymers were prepared by a new method. First, a graft copolymer (CPVC-cg-AA) comprising of polyacrylic acid (PAA) as branched chains and chlorinated polyvinyl chloride (CPVC) as backbone was synthesized by in-situ chlorinating graft copolymerization (ISCGC). Second, the acid groups of the graft copolymer were neutralized by sodium hydroxide and aluminium hydroxide, respectively in order to prepare carboxylated ionic copolymers.

Platinum-coated gold nanoporous film surface: Electrodeposition and enhanced electrocatalytic activity for methanol oxidation

This report describes the preparation of Pt-nanoparticle-coated gold-nanoporous film (PGNF) on a gold substrate via a simple "green" approach. The gold electrode that has been anodized under a high potential of 5 V is reduced by freshly prepared ascorbic acid (AA) solution to obtain gold nanoporous film electrode. Then the Pt nanoparticle is grown on the electrode by cyclic voltammetry (CV).

Grafting acrylic acid onto polypropylene by reactive extrusion with pre-irradiated PP as initiator

In this paper, the modification of polypropylene (PP) with acrylic acid (AA) by reactive extrusion using pre-irradiated PP (rPP) as initiator was investigated. It was found the relatively high graft degree (Gd) and slight degradation of modified PP was obtained when 20 wt% rPP was used. This result can be explained in terms of effective concentration of free radicals.

Simultaneous electrochemical determination of dopamine, uric acid and ascorbic acid using palladium nanoparticle-loaded carbon nanofibers modified electrode

Palladium nanoparticle-loaded carbon nanofibers (Pd/CNFs) were prepared by electrospinning and subsequent thermal treatment processes. Pd/CNFs modified carbon paste electrode (Pd/CNF-CPE) displayed excellent electrochemical catalytic activities towards dopamine (DA), uric acid (UA) and ascorbic acid (AA). The oxidation overpotentials of DA, UA and AA were decreased significantly compared with those obtained at the bare CPE. Differential pulse voltammetry was used for the simultaneous determination of DA, UA and AA in their ternary mixture.

Simultaneous determination of dopamine, ascorbic acid and uric acid with electrospun carbon nanofibers modified electrode

A novel carbon-nanofiber-modified carbon-paste electrode (CNF-CPE) was employed for the simultaneous determination of dopamine (DA), ascorbic acid (AA) and uric acid (UA) with good selectivity and high sensitivity. The CNFs were prepared by combination of electrospinning technique with thermal treatment method and were used without any pretreatment. In application to determination of DA, AA and UA in the ternary mixture, the pristine CNF-CPE exhibited well-separated differential pulse voltammetric peaks with high catalytic current. Low detection limits of 0.04 mu M, 2 mu M and 0.2 mu M for DA, AA and UA were obtained, with the linear calibration curves over the concentration range 0.04-5.6 mu M, 2-64 mu M and 0.8-16.8 mu M, respectively.

丙烯酸-甲基丙烯酸共聚物的合成和吸湿性能

采用甲基丙烯酸(MAA)、丙烯酸(AA)为聚合单体,以亚硫酸氢钠-过硫酸铵为引发剂,采用水溶液聚合法制备了聚丙烯酸-甲基丙烯酸P(AA-MAA)。系统地研究了单体浓度、单体配比、反应温度等各项聚合条件对聚合物吸湿性能的影响。

Simultaneous electrochemical determination of uric acid, dopamine, and ascorbic acid at single-walled carbon nanohorn modified glassy carbon electrode

Single-walled carbon nanohorn modified glassy carbon electrode (SWCNH-modified GCE) was first employed for the simultaneous determination of uric acid (UA), dopamine (DA), and ascorbic acid (AA). The SWCNH-modified GCE displayed excellent electrochemical catalytic activities. The oxidation overpotentials of UA, DA, and AA decrease significantly and their oxidation peak currents increase dramatically at SWCNH-modified GCE. Linear sweep voltammetry (LSV) was used for the simultaneous determination of UA, DA, and AA in their ternary mixture. The peak separations between UA and DA, and DA and AA are large up to 152 mV and 221 mV, respectively.

Electrochemical Sensing and Biosensing Platform Based on Chemically Reduced Graphene Oxide

In this paper, the characterization and application of a chemically reduced graphene oxide modified glassy carbon (CR-GO/GC) electrode, a novel electrode system, for the preparation of electrochemical sensing and biosensing platform are proposed. Different kinds of important inorganic and organic electroactive compounds (i.e., probe molecule (potassium ferricyanide), free bases of DNA (guanine (G), adenine (A), thymine (T), and cytosine (C)), oxidase/dehydrogenase-related molecules (hydrogen peroxide (H2O2/beta-nicotinamide adenine dinucleotide (NADH)), neurotransmitters (dopamine (DA)), and other biological molecules (ascorbic acid (AA), uric acid (UA), and acetaminophen (APAP)) were employed to study their electrochemical responses at the CR-GO/GC electrode, which shows more favorable electron transfer kinetics than graphite modified glassy carbon (graphite/GC) and glassy carbon (GC) electrodes.

Fabrication and characterization of microstructured and pH sensitive interpenetrating networks hydrogel films and application in drug delivery field

Novel microstructured and pH sensitive poly(acryliac acid-co-2-hydroxyethyl methacrylate)/poly(vinyl alcohol) (P(AA-co-HEMA)/PVA) interpenetrating network (IPN) hydrogel films were prepared by radical precipitation copolymerization and sequential IPN technology. The first P(AA-co-HEMA) network was synthesized in the present of IPN aqueous solution by radical initiating, then followed by condensation reaction (Glutaraldehyde as crosslinking agent) within the resultant latex, it formed multiple IPN microstructured hydrogel film. The film samples were characterized by IR, SEM and DSC. Swelling and deswelling behaviors and mechanical property showed the novel multiple IPN nanostuctured film had rapid response and good mechanical property. The IPN films were studied as controlled drug delivery material in different pH buffer solution using cationic compound, crystal violet as a model drug.

聚丙烯酸钠/尿素多孔材料的制备与吸湿性能

首次以丙烯酸(AA)和尿素(U)为原料,N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,亚硫酸氢钠-过硫酸铵为引发剂,采用水溶液聚合法制备聚丙烯酸钠/尿素多孔材料(PAA/U)。研究了中和度、尿素含量等聚合条件对其吸湿性能的影响。由正交实验确定了最佳反应条件,其吸湿率最高达0.975 g/g。应用SigmaStat3.5进行多元线性回归分析得到各因素与吸湿率的数学关联式。红外光谱(FT-IR)和热重(TGA)分析表明,添加尿素后,形成了新的吸湿基团异氰酸根。扫描电镜(SEM)观察到PAA/U表面出现孔洞,增加了有效吸湿比表面积,其吸湿性能明显提高。

Preparation of poly(acrylamide-co-acrylic acid) aqueous latex dispersions using anionic polyelectrolyte as stabilizer

High-solids, low-viscosity, stable poly(acrylamide-co-acrylic acid) aqueous latex dispersions were prepared by the dispersion polymerization of acrylamide (AM) and acrylic acid (AA) in an aqueous solution of ammonium sulfate (AS) medium using anionic polyelectrolytes as stabilizers. The anionic polyelectrolytes employed include poly(2-acrylamido-2-methylpropanesulfonic acid sodium) (PAMPSNa) homopolymer and random copolymers of 2-acrylamido-2-methylpropanesulfonic acid sodium (AMPSNa) with methacrylic acid sodium (MAANa), acrylic acid sodium (AANa) or acrylamide (AM). The influences of stabilizer's structure, composition, molecular weight and concentration, AA/AM molar feed ratio, total monomer, initiator and aqueous solution of AS concentration, and stirring speed on the monomer conversion, the particle size and distribution, the bulk viscosity and stability of the dispersions, and the intrinsic viscosity of the resulting copolymer were systematically investigated. Polydisperse spherical as well as ellipsoidal particles were formed in the system. The broad particle size distributions indicated that coalescence of the particles takes place to a greater extent.

盐水介质中分散聚合法制备两性聚电解质的研究

利用聚丙烯酰氧乙基三甲基氯化铵(PDAC)作为分散稳定剂,阴离子单体丙烯酸(AA)、阳离子单体甲基丙烯酰氧乙基三甲基氯化铵(DMC)和非离子单体丙烯酰胺(AM)在硫酸铵水溶液中通过分散共聚合,制备了稳定分散在盐水中的聚合物微球。考察了无机盐浓度、分散剂用量对分散共聚合的影响。研究结果表明:体系内无机盐浓度的增加导致聚合物分子量降低;而随分散剂浓度的增加,微球粒径先减小后增加。制备的两性聚电解质溶液在等电点附近时,聚合物的特性黏度随盐浓度的增加而增加,显示明显的反聚电解质效应。