Digestilidade in vitro do bagaço de cana-de-açúcar hidrolisado, submetido a diferentes tempos de estocagem e de adaptação ao bovino doador de fluido ruminal

An experiment was conducted to study the in vitro digestibility of dry matter (IVDMD) and gross energy (IVGED) of hydrolyzed sugarcane bagasse with different storage times and two periods of adaptation of the bovine to the diet. A completely randomized design with four treatments and five replications was used. Treatments A,B,C, and D which corresponded to the times of 0, 15, 30, and 45 days of storage time period of the bagasse, respectively. Each treatment was studied at 7 and 45 after adaptation of the bovine ruminal donor to the diet. After 30 days storage, the bagasse IVDMD was inpaired for both 7 and 45 days of adaptation. Averages values of 25.8; 25.9; 23.1 and 23.3% were obtained for IVDMD with seven days of adaptation, and 25.04; 21.6; 12.5 and 11.4% with 45 days of adaptation for storage periods of 0; 15; 30 and 45 days, respectively. For IVGED, the averages obtained were 33.4; 27.8; 30.9; and 27.2% with seven days, and 30; 26.6; 20.6 and 14.5% with 45 days of adaptation for storage periods of 0, 15, 30 and 45 days, respectively.

Valor nutritivo do feno de Brachiaria decumbens Stapf cv. Basilisk submetido a tratamento com amônia anidra ou uréia

The effects of the ammoniation of Brachiaria decumbens hay was evaluated. The hay bales were distributed into a complete randomized block design, with four replications and they were submitted to the treatments: untreated or treated with anhydrous ammonia (NH3)(2,0 and 3,0% of the DM) or with urea (3,6 and 5,4% of the DM). All the hays bales remained under plastic cover for 45 days. After three days of aeration, samples were collected for the determination of the chemical composition, nitrogenous compounds fraction and the in vitro dry matter (IVDDM) and organic matter (IVDOM) digestibility. In the metabolic study, Saanen goats breed was used in a 5x5 Latin squares design, where the apparent digestibility, the voluntary intake and the nutritive value index were evaluated. The ammoniation increased the contents of the total N, N ammonia (N-NH3) and non-protein N, with high effect on the levels of 3,0% of NH3 and 5,4% of urea. There were no differences between the level of 3,0% of NH3 and 5,4% of urea for the total N, N-NH3 and NPN. However, the treatment with 3,0% of NH3 allowed a larger fixation of N in ADIN and NDIN forms. The ammoniation increased the IVDMD and IVDMO and reduced the contents of neutral detergent fiber (NDF), hemicellulose, acid detergent fiber (ADF) and lignin, but it did not alter the cellulose and gross energy contents. The ammoniation increased the DM, OM, CP, NDF, ADF, hemicellulose, cellulose and gross energy apparent digestibility and as well as the voluntary intake of DM, digestible DM, digestible OM, digestible protein, digestible energy and the nutritive value index. The ammoniation increased the hay nutritive value index, but there were no differences between the levels of NH3 and urea.

A 4.2 kDa synthetic peptide as a potential probe to evaluate the antibacterial activity of coumarin drugs

The coumarin antibiotics are potent inhibitors of DNA replication whose target is the enzyme DNA gyrase, an ATP-dependent bacterial type II topoisomerase. The coumarin drugs inhibit gyrase action by competitive binding to the ATP-binding site of DNA gyrase B protein. The production of new biologically active products has stimulated additional studies on coumarin-gyrase interactions. In this regard, a 4.2 kDa peptide mimic of DNA gyrase B protein from Escherichia coli has been designed and synthesized. The peptide sequence includes the natural fragment 131-146 (coumarin resistance-determining region) and a segment containing the gyrase-DNA interaction region (positions 753-770). The peptide mimic binds to novobiocin (K-a = 1.4 +/- 0.3 x 10(5) m(-1)), plasmid (K-a = 1.6 +/- 0.5 x 10(6) m(-1)) and ATP (K-a = 1.9 f 0.4 x 10(3) m(-1)), results previously found with the intact B protein. on the other hand, the binding to novobiocin was reduced when a mutation of Arg-136 to Leu-136 was introduced, a change previously found in the DNA gyrase B protein from several coumarin-resistant clinical isolates of Escherichia coLi. In contrast, the binding to plasmid and to ATP was not altered. These results suggest that synthetic peptides designed in a similar way to that described here could be used as mimics of DNA gyrase in studies which seek a better understanding of the ATP, as well as coumarin, binding to the gyrase and also the mechanism of action of this class of antibacterial drugs. Copyright (C) 2004 European Peptide Society and John Wiley Sons, Ltd.

EFFECT OF ELECTROLYTIC AND CHEMICAL LESION BY IBOTENIC ACID OF THE AMYGDALA ON SALT INTAKE

Sodium chloride intake was studied in male Holtzman rats weighing 250-300 g submitted to electrolytic and chemical lesion of the cell bodies, not fibers of the amygdaloid complex. Sodium chloride (1.5%) intake increased in animals with electrolytic lesion of the corticomedial nucleus of the amygdala. Sodium chloride (1.5%) intake increased after ibotenic acid injection into the corticomedial nucleus of the amygdala to a larger extent (26.6 +/- 9.2 to 147.6 +/- 34.6 ml/5 days). The results indicate that sodium intake response can be induced by lesions, which involved only cell bodies. The fibers of passage of the corticomedial nucleus of the amygdala produce a water intake less consistent than that induced by ibotenic acid, which is more acute. The results show that cell bodies of this region of the amygdala are involved in the control of sodium chloride intake.

The caprine oxyhemoglobin dissociation curve

The caprine oxyhemoglobin dissociation curve has not been previously defined. Blood from 10 healthy goats was equilibrated in a tonometer with calibrated gas mixtures of oxygen at concentrations of 95%, 21%, 13%, 12%, 10%, 9%, 8%, 5%, 4% and 2.5%, 5% carbon dioxide, balance nitrogen. The pH, partial pressure of oxygen (PO2), partial pressure of carbon dioxide (PCO2), total hemoglobin, oxyhemoglobin saturation, carboxyhemoglobin, methemoglobin, and oxygen content were measured. The PO2/oxyhemoglobin and the PO2/oxygen content relationships were graphed with curve-fitting software and a formula for calculating oxyhemoglobin from PO2 was generated. The maximum oxygen content per gram of hemoglobin was 1.29 ml of oxygen per gram of hemoglobin. The PO2 at which hemoglobin was 50% saturated (P-50) from the PO2/oxyhemoglobin relationship was 28.6 +/- 1.5 mmHg and that from the PO2/oxygen content relationships was 29.1 +/- 1.6 mmHg. The Hill coefficient for the PO2/oxyhemoglobin data was 3.0 +/- 0.4. (c) 2005 Elsevier Ltd. All rights reserved.

Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions

Objectives. This study evaluated the effect of two different surface conditioning methods on the repair bond strength of a bis-GMA-adduct/bis-EMA/TEGDMA based resin composite after three aging conditions.Methods. Thirty-six composite resin blocks (Esthet X, Dentsply) were prepared (5 mm x 6 mm x 6 mm) and randomly assigned into three groups for aging process: (a) immersion in citric acid (pH 3.0 at 37 degrees C, 1 week) (CA); (b) boiling in water for 8h (BW) and (c) thermocycling (x5000, 5-55 degrees C, dwell time: 30s) (TC). After aging, the blocks were assigned to one of the following surface conditioning methods: (1) silica coating (30 mu m SiOx) (CoJet, 3M ESPE) + silane (ESPE-Sil) (CJ), (2) phosphoric acid + adhesive resin (Single Bond, 3M ESPE) (PA). Resin composite (Esthet.X (R)) was bonded to the conditioned substrates incrementally and light polymerized. The experimental groups formed were as follows: Gr1:CA + PA; Gr2:CA + CJ Gr3:BW + PA; Gr4: BW + CJ; Gr5:TC + PA; Gr6: TC + CJ. The specimens were sectioned in two axes (x and y) with a diamond disc under coolant irrigation in order to obtain non-trimmed bar specimens (sticks, 10 mm x 1 mm x 1 mm) with 1 mm(2) of bonding area. The microtensile test was accomplished in a universal testing machine (crosshead speed: 0.5 mm min(-1)).Results. The means and standard deviations of bond strength (MPa +/- S.D.) per group were as follows: Gr1: 25.5 +/- 10.3; Gr2: 46.3 +/- 10.1; Gr3: 21.7 +/- 7.1; Gr4: 52.3 +/- 15.1; GrS: 16.1 +/- 5.1; Gr6, 49.6 +/- 13.5. The silica coated groups showed significantly higher mean bond values after all three aging conditions (p < 0.0001) (two-way ANOVA and Tukey tests, alpha = 0.05). The interaction effect revealed significant influence of TC aging on both silica coated and acid etched groups compared to the other aging methods (p < 0.032). Citric acid was the least aggressive aging medium.Significance. Chairside silica coating and silanization provided higher resin-resin bond strength values compared to acid etching with phosphoric acid followed by adhesive resin applications. Thermocycling the composite substrates resulted in the lowest repair bond strength compared to citric acid challenge or boiling in water. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

Statement of problem. Ceramic surface treatment is crucial for bonding to resin. High crystalline ceramics are poorly conditioned using traditional procedures.Purpose. The purpose of this study was to evaluate the effect of silica coating on a densely sintered alumina ceramic relative to its bond strength to composite, using a resin luting agent.Material and methods. Blocks (6 X 6 X 5 mm) of ceramic and composite were made. The ceramic (Procera AllCeram) surfaces were polished, and the blocks were divided into 3 groups (n = 5): SB, airborne-particle abrasion with 110-mu m Al(2)O(3); RS, silica coating using Rocatec System; and CS, silica coating using CoJet System. The treated ceramic blocks were luted to the composite (W3D Master) blocks using a resin luting agent (Panavia F). Specimens were stored in distilled water at 37 degrees C for 7 days and then Cut in 2 axes, x and y, to obtain specimens with a bonding area of approximately 0.6 mm(2) (n = 30). The specimens were loaded to failure in tension in a universal testing machine, and data were statistically analyzed using a randomized complete block design analysis of variance and Tukey's test (alpha=.05). Fractured surfaces were examined using light microscopy and scanning electron microscopy to determine the type of failure. Energy-dispersive spectroscopy was used for surface compositional analysis.Results. Mean bond strength values (MPa) of Groups RS (17.1 +/- 3.9) (P = .00015) and CS (18.5 +/- 4.7) (P=.00012) were significantly higher than the values of Group SB (12.7 +/- 2.6). There was no statistical difference between Groups RS and CS. All failures occurred at the adhesive zone.Conclusion. Tribochemical silica coating systems increased the tensile bond strength values between Panavia F and Procera AllCeram ceramic.

Rapid and sensitive method for the determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with UV-Vis detection

A high-performance liquid chromatography (HPLC) method for the determination of acetaldehyde in fuel ethanol was developed. Acetaldehyde was derivatized with 0.900 mL 2,4-dinitrophenylhydrazine (DNPHi) reagent and 50 mu L phosphoric acid 1 mol L-1 at a controlled room temperature of 15 degrees C for 20 min. The separation of acetaldehyde- DNPH (ADNPH) was carried out on a Shimadzu Shim-pack C-18 column, using methanol/LiCl(aq) 1.0 mM (80/20, v/v) as a mobile phase under isocratic elution and UV-Vis detection at 365 nm. The standard curve of ADNPH was linear in the range 3-300 amg L-1 per injection (20 mu L) and the limit of detection (LOD) for acetaldehyde was 2.03 mu g L-1, with a correlation coefficient greater than 0.999 and a precision (relative standard deviation, RSD) of 5.6% (n=5). Recovery studies were performed by fortifying fuel samples with acetaldehyde at various concentrations and the results were in the range 98.7-102%, with a coefficient of variation (CV) from 0.2% to 7.2%. Several fuel samples collected from various gas stations were analyzed and the method was successfully applied to the analysis of acetaldehyde in fuel ethanol samples.

Pathogenicity of isolates of Metarhizium anisopliae (Metsch.) Sorokin towards the cattle tick Boophilus microplus (Can.) (Acari : Ixodidae) under laboratory conditions

The pathogenic activity of Metarhizium anisopliae on Boophilus microplus females was assessed using five fungal isolates. Groups of 8 engorged ticks collected from cattle on free pasture were inoculated by immersion for 5 seconds in a spore suspension containing 2.5 x 10(8) conidia/ml. The groups were transferred to moist chambers in which they were maintained at 27 +/- 1 degreesC for about 15 days, their mortality being determined every 2, or occasionally 3, days. The isolate that produced the best results in this assay was used to inoculate female ticks with spore suspensions containing 0, 7.5 x 105, 7.5 x 10(6), 7.5 x 10(7) and 7.5 x 10(8) conidia/ml, under the same conditions as described above. The pathogenic action of M. anisopliae on engorged females was clearly demonstrated. Isolates E9 and AM were more effective, causing high tick mortality as well as reduced oviposition. The concentration of 7.5 x 10(8) conidia/ml was the most effective, with the fungus sporulating on 91.1% of the ticks. Mean percent oviposition was highest in the control treatment and lowest in the treatment with 7.5 x 10(8) conidia/ml.

Effects of aerobic endurance training status and specificity on oxygen uptake kinetics during maximal exercise

The main purpose of this study was to analyze the effects of exercise mode, training status and specificity on the oxygen uptake ((V)over dot O-2) kinetics during maximal exercise performed in treadmill running and cycle ergometry. Seven runners (R), nine cyclists (C), nine triathletes (T) and eleven untrained subjects (U), performed the following tests on different days on a motorized treadmill and on a cycle ergometer: (1) incremental tests in order to determine the maximal oxygen uptake ((V)over dot O-2max) and the intensity associated with the achievement of (V)over dot O-2max (I(V)over dot O-2max); and (2) constant work-rate running and cycling exercises to exhaustion at I(V)over dot O-2max to determine the effective time constant of the (V)over dot O-2 response (tau(V)over dot O-2). Values for (V)over dotO(2max) obtained on the treadmill and cycle ergometer [R=68.8 (6.3) and 62.0 (5.0); C=60.5 (8.0) and 67.6 (7.6); T=64.5 (4.8) and 61.0 (4.1); U=43.5 (7.0) and 36.7 (5.6); respectively] were higher for the group with specific training in the modality. The U group showed the lowest values for VO2max, regardless of exercise mode. Differences in tau(V)over dot O-2 (seconds) were found only for the U group in relation to the trained groups [R=31.6 (10.5) and 40.9 (13.6); C=28.5 (5.8) and 32.7 (5.7); T=32.5 (5.6) and 40.7 (7.5); U=52.7 (8.5) and 62.2 (15.3); for the treadmill and cycle ergometer, respectively]; no effects of exercise mode were found in any of the groups. It is concluded that tauVO(2) during the exercise performed at I(V)over dot O-2max is dependent on the training status, but not dependent on the exercise mode and specificity of training. Moreover, the transfer of the training effects on tau(V)over dotO(2) between both exercise modes may be higher compared with (V)over dot O-2max.

2,3-Dihydrobenzofuran neolignans from Aristolochia pubescens

From a hexane extract of stems and roots of Aristolochia pubescens, the new neolignans (2S,3S,1'R,2'R)- and (2S,3S, 1'S,2'R)-2,3-dihydro-5-(1',2'-dihydroxypropyl)-2-(4-hydroxy-3-methylbenzofuran) and (2S,3S,1'R,2'R)- and (2S,3S,1'S,2'R)-2,3-dihydro-5-(1',2'-dihydroxypropyl)-2-(3,4-dimethoxyphenyl)-7-methoxy-3-methyl-benzofuran were isolated, together with the known neolignan licarin A, and its bisnor-neolignan aldehyde and acid derivatives. In addition, sitosterol, 8R,9R-oxide-beta-caryophyllene, kobusone, ent-kauran-16 alpha, 17-diol, vanillin, vanillic acid, (+)-sesamin, (+)eudesmin, and (-)-cubebin were isolated. The structures of the new compounds have been elucidated by spectroscopic methods and by chemical transformation using Mosher's acid chloride. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

CORRELATIONS AMONG LOW-ENERGY OBSERVABLES OF THE 4-NUCLEON SYSTEM

Using a simple effective nucleon-trinucleon interaction we predict and study certain new correlations which are expected to exist between low-energy s-wave spin-isospin singlet observables of the four-nucleon system when various potential models yielding essentially identical two- and three-nucleon observables are employed in four-nucleon calculations. The study of such correlations using different realistic potential models is expected to yield information about the nucleon-nucleon and three-nucleon interactions.

Risk factors for amenorrhea in juvenile systemic lupus erythematosus (JSLE): a Brazilian multicentre cohort study

We evaluated the prevalence and clinical associations of amenorrhea in 298 female juvenile systemic lupus erythematosus (JSLE) patients (ACR criteria) followed in 12 Brazilian Paediatric Rheumatology centres. Amenorrhea was observed in 35 patients (11.7%) with a mean duration of 7.2 +/- 3.6 months. The hormones were performed in 32/35 patients and none of them had FSH and LH levels above and estradiol below the normal range according to pubertal changes. JSLE patients with amenorrhea were younger (15.04 +/- 2.5 versus 17.8 +/- 3.1 years; P = 0.001), and had a shorter period of time between menarche and current age (3.4 +/- 2.9 versus 6.7 +/- 5.4 years; P = 0.001). Interestingly, the frequency, cumulative dose, number of pulses and duration of intravenous cyclophosphamide treatment were alike in patients with and without amenorrhea (P > 0.05). In contrast, patients with amenorrhea had significantly higher SLEDAI (P = 0.01) and SLICC/ACR-DI (P = 0.024) scores compared to those without this condition. Independent risk factors identified by multivariate analysis were higher SLEDAI (OR=1.059; CI=1.004-1.116; P=0.034) and SLICC/ACR-DI (OR=2.125; IC = 1.373-3.291; P = 0.001) scores. Our data suggest that in spite of imummosuppressive therapy, JSLE patients have an adequate ovarian follicular reserve and amenorrhea is particularly associated with disease activity and damage.