Oxidation of toluene in waste gas streams using mesoporous Ti-hexagonal mesoporous silica

Various mesoporous catalysts with titanium loadings between 0.5 and 4 Ti wt. % and surface areas between 600 and 1,600 m(2)/g were synthesized using the molecular designed dispersion technique. These catalysts were tested using toluene oxidation in a fixed bed reactor at temperatures between 300 and 550degreesC. The reaction products were found to be CO2 and CO with selectivity towards CO2 above 80% for all catalysts. The catalytic activity of the catalysts increases with titanium loading. The total conversion at 550degreesC was not affected by the textural porosity, but increased textural porosity did significantly reduce the ignition temperature by up to 50degreesC. The Thiele modulus was calculated to be much less than one for all these materials indicating that the reaction rate is not diffusion, limited.

In Australia are people born in other countries at higher risk of road trauma than locally born people?

This study examined whether people born in other countries had higher rates of death and hospitalization due to road crashes than people born in Australia. Data on deaths that occurred in the whole of Australia between 1994 and 1997 and hospitalizations that occurred in the state of New South Wales, Australia, between I July 1995 and 30 June 1997 due to road crashes were analyzed. The rates of death and hospitalization, adjusted for age and area of residence, were calculated using population data from the 1996 Australian census. The study categorized people born in other countries according to the language (English speaking, non-English speaking) and the road convention (left-hand side, right-hand side) of their country of birth. Australia has the left-hand side driving convention. The study found that drivers born in other countries had rates of death or hospitalization due to road trauma equal to or below those of Australian born drivers. In contrast, pedestrians born in other countries, especially older pedestrians had higher rates of death and hospitalization due to road crashes. Pedestrians aged 60 years or more born in non-English speaking countries where traffic travels on the right-hand side of the road had risks about twice those of Australian born pedestrians in the same age group. (C) 2003 Elsevier Ltd. All rights reserved.

The ambivalent practices of reflexivity

Reflexivity involves turning one's reflexive gaze oil discourse-turning language back on itself to see the Work it does in constituting the world. The subject/researcher sees simultaneously the object of her or his gaze and the means by which the object (which may include oneself as subject) is being constituted. The consciousness of self that reflexive writing sometimes entails may be seen to slip inadvertently into constituting the very (real) self that seems to contradict a focus on the constitutive power of discourse. This article explores this site of slippage and of ambivalence. In a collective biography oil the topic of reflexivity, the authors tell and write stories about reflexivity and in a doubled reflexive arc, examine themselves at work during the workshop. Examining their own memories and reflexive practices, they explore this place of slippage and provide theoretical and practical insight into what is going on in reflexive research and writing.

Characterization of pore wall heterogeneity in nanoporous carbons using adsorption: the slit pore model revisited

In this paper, we propose a new nonlocal density functional theory characterization procedure, the finite wall thickness model, for nanoporous carbons, whereby heterogeneity of pore size and pore walls in the carbon is probed simultaneously. We determine the pore size distributions and pore wall thickness distributions of several commercial activated carbons and coal chars, with good correspondence with X-ray diffraction. It is shown that the conventional infinite wall thickness approach overestimates the pore size slightly. Pore-pore correlation has been shown to have a negligible effect on prediction of pore size and pore wall thickness distributions for small molecules such as argon used in characterization. By utilizing the structural parameters (pore size and pore wall thickness distribution) in the generalized adsorption isotherm (GAI) we are able to predict adsorption uptake of supercritical gases in BPL and Norit RI Extra carbons, in excellent agreement with experimental adsorption uptake data up to 60 MPa. The method offers a useful technique for probing features of the solid skeleton, hitherto studied by crystallographic methods.

Material influence on the stress corrosion cracking of rock bolts

Rock bolt stress corrosion cracking (SCC) has been investigated using the linearly increasing stress test (LIST). One series of experiments determined the threshold stress of various bolt metallurgies (900 MPa for 1355AXRC, and 800 MPa for MAC and MA840B steels). The high values of threshold stress suggest that SCC begins in rock bolts when they are sheared by moving rock strata. SCC only occurred for environmental conditions which produce hydrogen on the sample surface, leading to hydrogen embrittlement and SCC. Different threshold potentials were determined for a range of metallurgies. Cold work was shown to increase the resistance of the steel to SCC. Rock bolt rib geometry does not have a direct impact on the SCC resistance properties of the bolt, although the process by which the ribs are produced can introduce tensile stresses into the bolt which lower its resistance to SCC. (C) 2004 Elsevier Ltd. All rights reserved.

Drinfeld twists and symmetric Bethe vectors of supersymmetric fermion models

We construct the Drinfeld twists ( factorizing F-matrices) of the gl(m-n)-invariant fermion model. Completely symmetric representation of the pseudo-particle creation operators of the model are obtained in the basis provided by the F-matrix ( the F-basis). We resolve the hierarchy of the nested Bethe vectors in the F-basis for the gl(m-n) supersymmetric model.

Determination of mechanical properties of PECVD silicon nitride thin films for tunable MEMS Fabry-Pérot optical filters

This paper reports an investigation on techniques for determining elastic modulus and intrinsic stress gradient in plasma-enhanced chemical vapor deposition (PECVD) silicon nitride thin films. The elastic property of the silicon nitride thin films was determined using the nanoindentation method on silicon nitride/silicon bilayer systems. A simple empirical formula was developed to deconvolute the film elastic modulus. The intrinsic stress gradient in the films was determined by using micrometric cantilever beams, cross-membrane structures and mechanical simulation. The deflections of the silicon nitride thin film cantilever beams and cross-membranes caused by in-thickness stress gradients were measured using optical interference microscopy. Finite-element beam models were built to compute the deflection induced by the stress gradient. Matching the deflection computed under a given gradient with that measured experimentally on fabricated samples allows the stress gradient of the PECVD silicon nitride thin films introduced from the fabrication process to be evaluated.

Ground-State Entanglement of the BCS Model

The concept of local concurrence is used to quantify the entanglement between a single qubit and the remainder of a multiqubit system. For the ground state of the BCS model in the thermodynamic limit the set of local concurrences completely describes the entanglement. As a measure for the entanglement of the full system we investigate the average local concurrence (ALC). We find that the ALC satisfies a simple relation with the order parameter. We then show that for finite systems with a fixed particle number, a relation between the ALC and the condensation energy exposes a threshold coupling. Below the threshold, entanglement measures besides the ALC are significant.

A study on stress corrosion cracking and hydrogen embrittlement of AZ31 magnesium alloy

The stress corrosion cracking (SCC) behavior and pre-exposure embrittlement of AZ31 magnesium alloy have been studied by slow strain rate tensile (SSRT) tests in this paper. It is showed that AZ31 sheet material is susceptible to SCC in distilled water, ASTM D1.387 solution, 0.01 M NaCl and 0.1 M NaCl solution. The AZ31 magnesium alloy also becomes embrittled if pre-exposed to 0.01 M NaCl solution prior to tensile testing. The degree of embrittlement increased with increasing the pre-exposure time, It is proposed that both the pre-exposure embrittlement and SCC were due to hydrogen which reduces the cohesive strength. i,e,. hydrogen embrittlement, (c) 2005 Elsevier B.V. All rights reserved.

Post-familial families and the domestic division of labour

This paper takes as its starting point recent claims by Beck-Gernsheim (2002) that we are living in an era of post-familial families. Beck-Gernsheim (2002) argues that our lives are no longer structured as they once were by tradition, class, religion and kin. Instead the family has become a transitional phase as individuals strive for fulfillment of personal goals and personal life projects. The demographic evidence to support these claims is clearly evident in relation to changing patterns of family formation and dissolution, as well as the movement of married women into paid employment. But what is less evident is a decline in traditional patterns of gender stratification within families. This paper uses recent national data from Australia to examine the relationship between post-familial status, as indicated by marital status and employment, and time spent on housework. The results show that gender is still a clear predictor of time spent on housework, but that within gender there is evidence that gender inequality may be declining in non-traditional households.

'Lots of little kindnesses': valuing the role of older Australians as informal volunteers in the community

This paper describes the ways in which older people contribute to their communities and families as informal volunteers. It challenges current ways of thinking that assign an economic value to the productive activities undertaken by older people. Using qualitative data from a study of older people resident in Queensland, Australia, the paper explores the ways that older people contribute to their families and to the community and the outcomes associated with these activities. Two specific themes emerged from the data: first, the ways' in which older people contribute to strong inter-generational relations, and second, how they provide essential mutual support that permits many older people to remain living in the community. These contributions, while often small in themselves, are in aggregate critical both to family functioning and to the maintenance of sustainable and healthy communities. Many are reciprocal interactions that add value to the lives of individuals and offer positive social roles in later life, and they may be particularly important for those from minority cultural backgrounds or at risk of social isolation. The findings suggest that older people are integral to community and civil society and, therefore, that social policy should respond to the ageing of Australia's population and recognise the positive contributions of older people, rather than emphasising the costs of demographic change.

Distribution of an asymmetrical copepod, Hatschekia plectropomi, on the gills of Plectropomus leopardus

Hatschekia plectropomi, an ectoparasitic copepod found on the gills, infected Plectropomus leopardus from Heron Island Reef with 100% prevalence (n = 32) and a mean +/- S.E. infection intensity of 131.9 +/- 22.1. The distribution of 4222 adult female parasites across 32 individual host fish was investigated at several organizational levels ranging from the level of holobranch pairs to that of individual filaments. Parasites demonstrated a site preference for the two central holobranchs (2 and 3). Along the lengths of hemibranchs, filaments near the dorsal and ventral ends and those in the proximity of the bend region were rarely occupied. The probability of coming into contact with a suitable attachment site and the ability to withstand ventilation forces at that site were proposed as the major factors affecting distribution. Two H. plectropomi morphotypes were identified based on the direction of body curvature. Regardless of morphotype, 99.9% of individuals were attached such that the convex side of the body was oriented towards the oncoming ventilating water currents. Further, 93.3% of individuals attached to the posterior faces of filaments, leading to a predictable pattern of attachment for this species. It is suggested that the direction of body curvature develops in response to the direction of the ventilating water currents. (c) 2006 The Fisheries Society of the British Isles.

Disruption of NaS1 sulfate transport function in mice leads to enhanced acetaminophen-induced hepatotoxicity

Sulfate is required for detoxification of xenobiotics such as acetaminophen (APAP), a leading cause of liver failure in humans. The NaS1 sulfate transporter maintains blood sulfate levels sufficiently high for sulforiation reactions to work effectively for drug detoxification. In the present study, we identified two loss-of-function polymorphisms in the human NaS1 gene and showed the Nas1-null mouse to be hypersensitive to APAP hepatotoxicity. APAP treatment led to increased liver damage and decreased hepatic glutathione levels in the hyposulfatemic Nas1-null mice compared with that in normosulfatemic wild-type mice. Analysis of urinary APAP metabolites revealed a significantly lower ratio of APAP-sulfate to APAP-glucuronide in the Nas1-null mice. These results suggest hyposulfatemia increases sensitivity to APAP-induced hepatotoxicity by decreasing the sulfonation capacity to metabolize APAP. In conclusion, the results of this study highlight the importance of plasma sulfate level as a key modulator of acetaminophen metabolism and suggest that individuals with reduced NaS1 sulfate transporter function would be more sensitive to hepatotoxic agents.