Situação epidemiológica da brucelose bovina no Estado de Minas Gerais

Realizou-se um estudo para caracterizar a situação epidemiológica da brucelose bovina no Estado de Minas Gerais. O Estado foi estratificado em sete circuitos produtores. Em cada circuito foram amostradas aleatoriamente cerca de 300 propriedades e, dentro dessas, foi escolhido, de forma aleatória, um número pré-estabelecido de animais, dos quais foi obtida uma amostra de sangue. No total, foram amostrados 20.643 animais, provenientes de 2.204 propriedades. Em cada propriedade visitada aplicou-se um questionário epidemiológico para verificar o tipo de exploração e as práticas zootécnicas e sanitárias que poderiam estar associadas ao risco de infecção pela doença. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo, se pelo menos um animal foi reagente às duas provas sorológicas. As prevalências de focos e de animais infectados do Estado foram de 6,0% [5,0-7,1%] e 1,1% [0,78-1,4%], respectivamente. Os resultados para os circuitos pecuários da prevalência de focos e de animais foram: circuito 1, 4,7% [2,7-7,7%] e 0,82% [0,06-1,6%]; circuito 2, 7,2% [4,6-10,6%] e 1,2% [0,53-1,8%]; circuito 3, 6,8% [4,3-10,0%] e 1,5% [0,47-2,4%]; circuito 4, 6,5% [4,1-9,8%] e 1,1% [0,39-1,7%]; circuito 5, 3,8% [2,0-6,5%] e 0,40% [0,11-0,69%]; circuito 6, 6,2% [3,8-9,6%] e 0,66% [0,29-1,0%]; circuito 7, 11,0% [7,7-15,0%] e 1,7% [0,92-2,6%], respectivamente. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: compra de reprodutores (OR = 1,66 [1,13-2,44]), ocorrência de aborto nos últimos 12 meses (OR = 1,81 [1,26-2,60]) e presença de cervídeos na propriedade (OR = 1,56 [1,08-2,27]). A vacinação contra brucelose foi identificada como fator protetor (OR = 0,38 [0,19-0,79]). Concluiu-se que o programa obrigatório de vacinação de bezerras, iniciado na década de 1990, está sendo eficaz ao reduzir a prevalência em todo o Estado e em todos os sistemas de produção animal. As autoridades sanitárias devem priorizar o controle da compra de animais para reprodução, que não apresentem garantias sanitárias e incorporar essa medida às ações de educativas.

Situação epidemiológica da brucelose bovina no Estado da Bahia

O trabalho consistiu em estratificar o Estado da Bahia em quatro regiões com características homogêneas (circuitos produtores) para que fossem amostradas aleatoriamente, em cada uma delas, 300 propriedades. Em cada propriedade foram escolhidas, de forma aleatória, 10 a 15 fêmeas bovinas adultas, das quais foi obtida uma amostra de sangue. No total, foram amostrados 10.816 animais, provenientes de 1.413 propriedades. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado (Rosa Bengala) e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo se pelo menos um animal reagiu às duas provas sorológicas. As prevalências de focos e a de fêmeas adultas soropositivas do Estado foram de 4,2% [3,1-5,3%] e 0,66% [0,41-0,93%], respectivamente. Para os circuitos produtores foram: circuito 1, 5,8% [3,6-8,7%] e 0,86% [0,41-1,3%]; circuito 2, 3,1% [1,5-5,6%] e 1,2% [0,25-2,1%]; circuito 3, 6,3% [4,0-9,3%] e 1,7% [0,66-2,7%]; e circuito 4, 0,60% [0,07-2,2%] e 0,07 [0,00-0,21%]. Para a análise de fatores de riscos associados à doença foi aplicado um questionário epidemiológico em cada propriedade visitada. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: compra de reprodutores (OR= 2,27) e presença de áreas alagadiças (OR= 1,76). A vacinação de fêmeas de três até oito meses de idade foi um fator de proteção (OR= 0,53).

Características de produção e qualidade nutricional de genótipos de capim- colonião colhidos em três estádios de maturidade

Objetivou- se verificar a existência de variação genética entre cultivares de capim- colonião quanto ao efeito da maturidade sobre a composição química e a digestibilidade, e classificar os genótipos de acordo com características produtivas e de qualidade nutricional. Utilizou- se o delineamento de blocos ao acaso, com parcelas subdivididas e três repetições, considerando parcelas as datas de corte e subparcelas, os genótipos. A produção de MS diferiu entre os genótipos somente aos 90 dias de crescimento, mas a porcentagem de folhas, colmos e material morto variou tanto aos 60 como aos 90 dias de crescimento. Ao contrário do observado para as folhas, a composição química e a digestibilidade do colmo apresentou grande variabilidade entre os genótipos. O colmo apresentou concentrações mais elevadas de FDN, FDA e lignina e menores valores de PB em comparação às folhas. Apresentou ainda maior digestibilidade da MS aos 60 dias de crescimento e maior digestibilidade da FDN aos 30 e 60 dias de crescimento. No agrupamento dos cultivares, os genótipos PM39 e PM47 foram apontados como os mais promissores no programa de melhoramento, por apresentarem alta produtividade e alta qualidade nutricional. A maturidade pouco afeta a digestibilidade de folhas em comparação ao colmo. Quando a participação de colmo no total de massa seca aumenta, esse componente passa a ser o limitador da qualidade de plantas forrageiras. Portanto, programas de melhoramento devem considerar, além da relação folha:colmo, também a digestibilidade in vitro da FDN do colmo na seleção de genótipos.

Lysine and zinc chelate in diets for brown laying hens: effects on egg production and composition

It was evaluated the effects of levels of digestible lysine and chelate zinc combined in the diet for laying on the egg quality. It was used 720 birds, from 48 to 60 weeks of age, distributed in a completely randomized design in a 3 × 5 factorial scheme with three levels of zinc and five levels of lysine, applied into six replicates in the experimental units of eight birds per plot. The levels were: 137, 309 and 655 ppm zinc and 0.482, 0.527, 0.582, 0.644 and 0.732% digestible lysine. It was not observed any interaction among digestible lysine and zinc for the primary variables of fractions and egg composition. Levels of zinc reduced egg weight, suggesting the lowest efficiency in nutrient intake. At the highest dietary concentration of zinc, the addition of digestible lysine coincided with a linear increase in shell weight. However, zinc addition, regardless of lysine level in the diet, resulted in the reduction of egg weight and of the percentage of mineral matter in the yolk, limiting the efficiency of mineral deposition in this fraction of the egg. Concentration of zinc that produced the best results was 137 ppm inasmuch as higher quantities limit the use of digestible lysine, with effects harming composition and egg quality. The study indicates the following requirement for digestible lysine: 0.639% from the 48th to the 52nd week, 0.679% from the 52nd to 56th week, and 0.635% from the 56th to the 60th week. Considering the total period from 48th to the 60th week, the level 0.638% of lysine or the daily intake of 707 mg of the amino acid met the requirement for egg quality of semi-heavy layers used in this study.

Produção in vitro de embriões de ovinos: uma visão crítica do método e de seu resultado a campo

A metodologia de produção in vitro de embriões de ovinos implica no desenvolvimento de meios de maturação, fertilização e cultivo que permitam aumentar a taxa de clivagem e desenvolvimento, tanto para o investimento biotecnológico em programas comerciais, quanto para sua utilização em clonagem e transgenia dessa espécie animal. Do ponto de vista da pesquisa, os ovócitos podem ser obtidos pelas técnicas de punção e slicing a partir de ovários oriundos de matadouros, ou através de aspiração folicular por laparoscopia. Como vantagem, este método permite o uso de uma mesma doadora estimulada hormonialmente em intervalos periódicos, mantida sob rigoroso controle sanitário, o que é de vital importância para a produção de biofármacos em programas que utilisem os ovinos como modelo biológico. Por outro lado, em nosso país a demanda pela multiplicação de animais de alto valor genético, seja pela produtividade ou pelo elevado valor comercial dos mesmos, impõe o desenvolvimento, adaptação e otimização das diferentes metodologias desenvolvidas ao longo dos ultimos anos em laboratórios de referência mundiais. Nesse contexto, cresce de importância o perfeito conhecimento da fisiologia dessa espécie e das raças criadas em nosso país, e da problemática da produção in vitro de seus embriões. Respeitando essas premissas, gerar o desenvolvimento de protocolos que permitam não apenas aumentar a população de ovócitos passíveis de maturação in vitro, mas de sua competência ao desenvolvimento ao estágio de blastocisto, ou, alternativamente, sua transferência a receptoras em estágios precoces do desenvolvimento, evitando assim as conhecidas perdas durante o desenvolvimento in vitro, e o baixo percentual de gestações que chegam a termo, com cordeiro saudáveis. Trata-se de um desafio, que já apresenta os primeiros resultados em nosso país, tanto na produção comercial de embriões produzidos in vitro, quanto em programas de clonagem e transgenia.

Clonal relationship among atypical enteropathogenic Escherichia coli strains isolated from different animal species and humans

Forty-nine typical and atypical enteropathogenic Escherichia coli (EPEC) strains belonging to different serotypes and isolated from humans, pets (cats and dogs), farm animals (bovines, sheep, and rabbits), and wild animals (monkeys) were investigated for virulence markers and clonal similarity by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). The virulence markers analyzed revealed that atypical EPEC strains isolated from animals have the potential to cause diarrhea in humans. A close clonal relationship between human and animal isolates was found by MLST and PFGE. These results indicate that these animals act as atypical EPEC reservoirs and may represent sources of infection for humans. Since humans also act as a reservoir of atypical EPEC strains, the cycle of mutual infection of atypical EPEC between animals and humans, mainly pets and their owners, cannot be ruled out since the transmission dynamics between the reservoirs are not yet clearly understood.

Microbiological indicators for the assessment of performance in the hazard analysis and critical control points (HACCP) system in meat lasagna production

The HACCP system is being increasingly used to ensure food safety. This study investigated the validation of the control measures technique in order to establish performance indicators of this HACCP system in the manufacturing process of Lasagna Bolognese (meat lasagna). Samples were collected along the manufacturing process as a whole, before and after the CCPs. The following microorganism s indicator (MIs) was assessed: total mesophile and faecal coliform counts. The same MIs were analyzed in the final product, as well as, the microbiological standards required by the current legislation. A significant reduction in the total mesophile count was observed after cooking (p < 0.001). After storage, there was a numerical, however non-significant change in the MI count. Faecal coliform counts were also significantly reduced (p < 0.001) after cooking. We were able to demonstrate that the HACCP system allowed us to meet the standards set by both, the company and the Brazilian regulations, proved by the reduction in the established indicators

Evaluation of Femtosecond Laser-Induced Breakdown Spectroscopy for Analysis of Animal Tissues

The aim of this work was to evaluate the performance of femtosecond laser-induced breakdown spectroscopy (fs-LIBS) for the determination of elements in animal tissues. Sample pellets were prepared from certified reference materials, such as liver, kidney, muscle, hepatopancreas, and oyster, after cryogenic grinding assisted homogenization. Individual samples were placed in a two-axis computer-controlled translation stage that moved in the plane orthogonal to a beam originating from a Ti:Sapphire chirped-pulse amplification (CPA) laser system operating at 800 mu and producing a train of 840 mu J and 40 fs pulses at 90 Hz. The plasma emission was coupled into the optical fiber of a high-resolution intensified charge-coupled device (ICCD)-echelle spectrometer. Time-resolved characteristics of the laser-produced plasmas showed that the best results were obtained with delay times between 80 and 120 ns. Data obtained indicate both that it is a matrix-independent sampling process and that fs-LIBS can be used for the determination of Ca, Cu, Fe, K, Mg, Na, and P, but efforts must be made to obtain more appropriate detection limits for Al, Sr, and Zn.

Do synergies improve accuracy? A study of speed-accuracy trade-offs during finger force production

We explored possible effects of negative covariation among finger forces in multifinger accurate force production tasks on the classical Fitts's speed-accuracy trade-off. Healthy subjects performed cyclic force changes between pairs of targets ""as quickly and accurately as possible."" Tasks with two force amplitudes and six ratics of force amplitude to target size were performed by each of the four fingers of the right hand and four finger combinations. There was a close to linear relation between movement time and the log-transformed ratio of target amplitude to target size across all finger combinations. There was a close to linear relation between standard deviation of force amplitude and movement time. There were no differences between the performance of either of the two ""radial"" fingers (index and middle) and the multifinger tasks. The ""ulnar"" fingers (little and ring) showed higher indices of variability and longer movement times as compared with both ""radial"" fingers and multifinger combinations. We conclude that potential effects of the negative covariation and also of the task-sharing across a set of fingers are counterbalanced by an increase in individual finger force variability in multifinger tasks as compared with single-finger tasks. The results speak in favor of a feed-forward model of multifinger synergies. They corroborate a hypothesis that multifinger synergies are created not to improve overall accuracy, but to allow the system larger flexibility, for example to deal with unexpected perturbations and concomitant tasks.

An Evaluation of Different Bioreactor Configurations with Immobilized Yeast for Bioethanol Production

The bioethanol industry expects a huge expansion and new technologies are being implemented with the aim of optimizing the fermentation process. The behavior of cells of Saccharomyces cerevisiae immobilized in PVA-LentiKats, during the production of bioethanol in two reactor systems, was studied. The entrapped cell in LentiKats lenses showed a different profile using stirred tank reactor (STR) and packed column reactor (PCR). Low free cells accumulation in the medium was observed for the STR after 72 h of fermentation. On the other hand, no free cells accumulation was observed, probably due to the absence of mechanical agitation in PCR configuration. Better fermentation results were obtained working with STR (final cellular concentration = 13 g.L-1, Pf = 28 g.L-1, Qp = 1.17 g.L-1.h-1,and Yp/s = 0.3 g.g-1) in comparison to PCR (final cellular concentration = 11.4 g.L-1, Pf = 20 g.L-1, Qp = 0.83 g.L-1.h-1,and Yp/s = 0.25 g.g-1). Such results are probably due to the mechanical agitation of the medium provided by STR configuration, which permitted a better heat and mass transference.

Biomass Refinery as a Renewable Complement to the Petroleum Refinery

Biomass Refinery is a sequential of eleven thermochemical processes and one biological process with two initial basic treatments: prehydrolysis for lignocellulosics and low temperature conversion for biomass with medium-to-high content of lipids and proteins. The other ten processes are: effluent treatment plant, furfural plant, biodiesel plant, cellulignin dryer, calcination, fluidized bed boiler, authotermal reforming of cellulignin for syngas production, combined cycle of two-stroke low-speed engine or syngas turbine with fluidized bed boiler heat recovery, GTL technologies and ethanol from cellulose, prehydrolysate and syngas. Any kind of biomass such as wood, agricultural residues, municipal solid waste, seeds, cakes, sludges, excrements and used tires can be processed at the Biomass Refinery. Twelve basic products are generated such as cellulignin, animal feed, electric energy, fuels (ethanol, crude oil, biodiesel, char), petrochemical substitutes, some materials (ash, gypsum, fertilizers, silica, carbon black) and hydrogen. The technology is clean with recovery of energy and reuse of water, acid and effluents. Based on a holistic integration of various disciplines Biomass Refinery maximizes the simultaneous production of food, electric energy, liquid fuels and chemical products and some materials, achieving a competitive position with conventional and fossil fuel technologies, as well as payment capacity for biomass production. Biomass Refinery has a technical economical capability to complement the depletion of the conventional petroleum sources and to capture its GHGs resulting a biomass + petroleum ""green"" combination.

Production of Cellulolytic Enzymes by Anaerobic Fungi Cultivated in Different Conditions

The present paper studies the influence of different nutrients for the production of two cellulolytic enzymes: endo beta-1.4 glucanase and exo beta-1.4 glucanase by anaerobic fungi taken from cow rumen, that were fed a diet of corn silage and Brachiaria decumbens grass hay. During the enzymatic degradation assays, it was observed that the addition of some essential nutrients in the formulation of the culture medium contributed positively in the cellulolytic enzyme production, with exception of riboflavin. Such results contributed in the establishment of an effective method for the evaluation of enzymatic activities in anaerobic fibrolytic fungi. In this work, nutrients added to enrich the culture medium have successfully proven that they can be used as inoculating agents (inductors) in diets rich in ensilage with law nutritive value.

Fermentation of Groundnut Shell Enzymatic Hydrolysate for Fuel Ethanol Production by Free and Sorghum Stalks Immobilized Cells of Pichia stipitis NCIM 3498

Groundnut shell (GS), after separation of pod, is readily available as a potential feedstock for production of fermentable sugars. The substrate was delignified with sodium sulfite. The delignified substrate released 670 mg/g of sugars after enzymatic hydrolysis (50 degrees C, 120 rpm, 50 hrs) using commercial cellulases (Dyadic Xylanase PLUS, Dyadic Inc. USA). The groundnut shell enzymatic hydrolysate (45.6 g/L reducing sugars) was fermented for ethanol production with free and sorghum stalks immobilized cells of Pichia stipitis NCIM 3498 under submerged cultivation conditions. Immobilization of yeast cells on sorghum stalks were confirmed by scanning electron microscopy (SEM). A maximum of ethanol production (17.83 g/L, yield 0.44 g/g and 20.45 g/L, yield 0.47 g/g) was observed with free and immobilized cells of P. stipitis respectively in batch fermentation conditions. Recycling of immobilized cells showed a stable ethanol production (20.45 g/L, yield 0.47 g/g) up to 5 batches followed by a gradual downfall in subsequent cycles.

Cooperation, interaction and learning in local production systems: Evidence in Brazilian firms

In a local production system (LPS), besides external economies, the interaction, cooperation, and learning are indicated by the literature as complementary ways of enhancing the LPS's competitiveness and gains. In Brazil, the greater part of LPSs, mostly composed by small enterprises, displays incipient relationships and low levels of interaction and cooperation among their actors. The size of the participating enterprises itself for specificities that engender organizational constraints, which, in turn, can have a considerable impact on their relationships and learning dynamics. For that reason, it is the purpose of this article to present an analysis of interaction, cooperation, and learning relationships among several types of actors pertaining to an LPS in the farming equipment and machinery sector, bearing in mind the specificities of small enterprises. To this end, the fieldwork carried out in this study aimed at: (i) investigating external and internal knowledge sources conducive to learning and (ii) identifying and analyzing motivating and inhibiting factors related to specificities of small enterprises in order to bring the LPS members closer together and increase their cooperation and interaction. Empirical evidence shows that internal aspects of the enterprises, related to management and infrastructure, can have a strong bearing on their joint actions, interaction and learning processes.

Architecture for machining process and production monitoring based in open computer numerical control

This paper proposes an architecture for machining process and production monitoring to be applied in machine tools with open Computer numerical control (CNC). A brief description of the advantages of using open CNC for machining process and production monitoring is presented with an emphasis on the CNC architecture using a personal computer (PC)-based human-machine interface. The proposed architecture uses the CNC data and sensors to gather information about the machining process and production. It allows the development of different levels of monitoring systems with mininium investment, minimum need for sensor installation, and low intrusiveness to the process. Successful examples of the utilization of this architecture in a laboratory environment are briefly described. As a Conclusion, it is shown that a wide range of monitoring solutions can be implemented in production processes using the proposed architecture.