Vientiyhteistyö strategisena allianssimuotona

Tutkimuksen tavoitteena on ollut selvittää suomalaisten bioenergia-alan pk-yritysten halukkuus tehdä vientiyhteistyötä ja selvittää millaiset vientiyhteistyömuodot soveltuvat alalle. Tutkimuksessa on lisäksi selvitetty mitkä tekijät vaikuttavat menestyksekkääseen yhteistyöhön. Tutkimuskysymykset ovat: 1. Mitkä tekijät vaikuttavat strategisen allianssin ja vientiyhteistyön menestykseen? 2. Minkälaiset vientiyhteistyömuodot soveltuvat parhaiten bioenergia-alalle? Tutkimuksessa on käytetty kvalitatiivisia tutkimusmenetelmiä. Ensimmäisessä osiossa on vastattu kirjallisuuskatsauksen avulla ensimmäiseen tutkimuskysymykseen. Toisessa osiossa jälkimmäiseen tutkimuskysymykseen on vastattu analysoimalla teemahaastatteluita, joihin on valittu suomalaisia bioenergia-alan pk-yrityksiä. Tutkimuksessa saatiin selville, että luottamus ja sitoutuminen ovat yhteisiä päätekijöitä, kun tarkastellaan strategisia alliansseja ja vientiyhteistyötä. Muita menestykseen vaikuttavia yhteisiä tekijöitä on partnereiden valinta, yritysten yhteensopivuus, ystävyyssuhteet ja henkilökemiat, johtaminen sekä pitkän aikavälin suhteet. Bioenergia-alalle parhaiten soveltuvat vientiyhteistyömuodot ovat tutkimuksen mukaan yhteistyö suorassa viennissä (jälleenmyyjien tai tuontiagenttien kautta) ja markkinointiyhteistyö.

Panel Method Formulation for Oscillating Airfoils in Sonic Flow

The mathematical model for two-dimensional unsteady sonic flow, based on the classical diffusion equation with imaginary coefficient, is presented and discussed. The main purpose is to develop a rigorous formulation in order to bring into light the correspondence between the sonic, supersonic and subsonic panel method theory. Source and doublet integrals are obtained and Laplace transformation demonstrates that, in fact, the source integral is the solution of the doublet integral equation. It is shown that the doublet-only formulation reduces to a Volterra integral equation of the first kind and a numerical method is proposed in order to solve it. To the authors' knowledge this is the first reported solution to the unsteady sonic thin airfoil problem through the use of doublet singularities. Comparisons with the source-only formulation are shown for the problem of a flat plate in combined harmonic heaving and pitching motion.

A Well Stated Time Domain Integral Representation for Elastodynamic Analysis and Applications

This article discusses three possible ways to derive time domain boundary integral representations for elastodynamics. This discussion points out possible difficulties found when using those formulations to deal with practical applications. The discussion points out recommendations to select the convenient integral representation to deal with elastodynamic problems and opens the possibility of deriving simplified schemes. The proper way to take into account initial conditions applied to the body is an interesting topict shown. It illustrates the main differences between the discussed boundary integral representation expressions, their singularities and possible numerical problems. The correct way to use collocation points outside the analyzed domain is carefully described. Some applications are shown at the end of the paper, in order to demonstrate the capabilities of the technique when properly used.

Rakennuskonepalveluita tuottavan pk-yrityksen investointi- ja kustannusmalli

Tämän tutkimuksen päätavoitteena oli luoda yleisellä tasolla kustannusmalli maarakennuskonepalveluita tuottavien pk-yritysten käyttöön ja käytännön päätöstilanteiden avuksi osana päätöksenteko organisaation ja myyntityötä tekevän portaan kustannustarkkailuun. Mallin luomisen tarkoituksena oli että mallia voidaan helposti muokata erilaisten myyntitilanteiden kannattavuuksien tarkasteluun ja sitä kautta malli luo käyttäjilleen etulyöntiaseman luodessa pitkiä palvelusopimuksia ja erilaisten projektityömaiden myyntisopimuksia simuloimalla kaluston siirtokustannuksia olemassa olevien tiedettyjen kustannustekijöiden toimesta. Teollisuudessa ja palvelujentarjoajapuolella on vastaavia malleja esitetty, mutta erityisesti maarakennuspuolen ja konevuokrauksen kustannuslaskentamalleja ei julkisesta ole juurikaan saatavilla. Työn kustannusmallin muutoksia simuloitiin ja testattiin luomalla erilaisia kysyntäskenaarioita joista yksi esitellään tarkemmin työn testausosiossa. mallilla on helppo kasata kustannusdataa erilaisina yhtälöinä miten uudet työmaat ovat kannattavampia luomalla kokonaisvaltaisesti paljon lisää uusia työkohteita. Kustannusmallin rakentamiselle oli kysyntää ja tärkeänä tietona pidettiin kokonaisvaltaista muutosta ja tietoa millä tehollisilla tunneilla vastaavat hankinnat olisivat kannattavia. Työn teoriaosa pohjautuu pääasiassa hinnoittelun, kannattavuuden ja investointilaskelmien teoriaan, artikkeleihin ja tutkimuksiin sekä kirjoihin. Työn empiirinen osa perustuu arvioihin tämän hetken hintatasoista sekä arvioihin kustannusten kertymisestä maarakennuspalveluita tuottavissa pk-yrityksissä joissa organisaatiokaavio on matala ja toiminta tehokasta. Keskeisimmät tulokset liittyvät siihen miten kustannuksia tulee huomioida erilaisille asiakkaille ja millainen kustannusmalli on käyttökelpoinen eri tilanteissa.

Tehollisen lovijännityksen menetelmän käytettävyys ultralujien terästen korkealaatuisten hitsien väsymismitoituksessa

Tässä diplomityössä on tutkittu tehollisen lovijännityksen menetelmän soveltuvuutta ultralujien terästen korkealaatuisten hitsien väsymismitoitukseen. International Institute of Welding suosittelee käyttämään elementtimenetelmässä hitsin rajaviivoilla sekä juuressa fiktiivistä 1 mm pyöristystä, jonka avulla tehollinen lovijännitys määritetään. Kaikille liitostyypeille sovelletaan samaa, kaltevuudeltaan m = 3 olevaa SN-käyrää, jolloin maksimipääjännitystä vastaava väsymisluokka FAT saa arvon 225. Nykyisiä mitoitusohjeita on pidetty kuitenkin liian konservatiivisina, etenkin jos kyseessä on suurilujuuksisesta teräksestä valmistettu korkealaatuinen hitsi. Rajaviivalla vaikuttavaa lovijännitystä on tutkittu mallintamalla liitokset FEMAP – elementtimenetelmäohjelmalla varioimalla rajaviivan pyöristystä. Elementtimenetelmän tuloksia on verrattu analyyttisiin loven muotoluvun laskentakaavoihin. Tutkittavana on ollut Ruukin Optim 960 QC sekä Optim 1100 QC – teräksistä valmistettuja koesauvoja. Koesauvat on valmistettu sekä koestettu pääasiassa Lappeenrannan teknillisen yliopiston teräsrakenteiden laboratoriossa. Tutkittavat koesauvat ovat olleet kuormaa kantamattomia ristiliitoksia sekä päittäisliitoksia. Suurin osa koesauvoista on väsytetty käyttämällä jännityssuhdetta R < 0,11. Koesauvat on jaoteltu jännityssuhteen sekä liitostyypin mukaan. Kaikkien koekappaleiden karakteristiseksi väsymisluokan arvoksi on määritetty FAT 200. Alle 0,11 jännityssuhteella väsytettyjen koekappaleiden karakteristinen väsymisluokka on FAT 230 ja isoilla jännityssuhteilla väsytettyjen FAT 126. Tulosten perusteella nykyiset mitoitusohjeet eivät ole liian konservatiivisia. Väsymisluokkaa FAT 225 voidaan käyttää väsymislaskennassa, mikäli rakenteen kuormitusten suhde on alle 0,1. Isoilla jännityssuhteilla koestettujen koekappaleiden lukumäärä on ollut pieni, joten niiden mitoitukselle ei voida antaa tarkkoja ohjeita.

Manifestation of the pairing symmetry in the vortex core structure in iron-based superconductors

The superconducting gap is a basic character of a superconductor. While the cuprates and conventional phonon-mediated superconductors are characterized by distinct d- and s-wave pairing symmetries with nodal and nodeless gap distributions respectively, the superconducting gap distributions in iron-based superconductors are rather diversified. While nodeless gap distributions have been directly observed in Ba1–xKxFe2As2, BaFe2–xCoxAs2, LiFeAs, KxFe2–ySe2, and FeTe1–xSex, the signatures of a nodal superconducting gap have been reported in LaOFeP, LiFeP, FeSe, KFe2As2, BaFe2–xRuxAs2, and BaFe2(As1–xPx)2. Due to the multiplicity of the Fermi surface in these compounds s± and d pairing states can be both nodeless and nodal. A nontrivial orbital structure of the order parameter, in particular the presence of the gap nodes, leads to effects in which the disorder is much richer in dx2–y2-wave superconductors than in conventional materials. In contrast to the s-wave case, the Anderson theorem does not work, and nonmagnetic impurities exhibit a strong pair-breaking influence. In addition, a finite concentration of disorder produces a nonzero density of quasiparticle states at zero energy, which results in a considerable modification of the thermodynamic and transport properties at low temperatures. The influence of order parameter symmetry on the vortex core structure in iron-based pnictide and chalcogenide superconductors has been investigated in the framework of quasiclassical Eilenberger equations. The main results of the thesis are as follows. The vortex core characteristics, such as, cutoff parameter, ξh, and core size, ξ2, determined as the distance at which density of the vortex supercurrent reaches its maximum, are calculated in wide temperature, impurity scattering rate, and magnetic field ranges. The cutoff parameter, ξh(B; T; Г), determines the form factor of the flux-line lattice, which can be obtained in _SR, NMR, and SANS experiments. A comparison among the applied pairing symmetries is done. In contrast to s-wave systems, in dx2–y2-wave superconductors, ξh/ξc2 always increases with the scattering rate Г. Field dependence of the cutoff parameter affects strongly on the second moment of the magnetic field distributions, resulting in a significant difference with nonlocal London theory. It is found that normalized ξ2/ξc2(B/Bc2) dependence is increasing with pair-breaking impurity scattering (interband scattering for s±-wave and intraband impurity scattering for d-wave superconductors). Here, ξc2 is the Ginzburg-Landau coherence length determined from the upper critical field Bc2 = Φ0/2πξ2 c2, where Φ0 is a flux quantum. Two types of ξ2/ξc2 magnetic field dependences are obtained for s± superconductors. It has a minimum at low temperatures and small impurity scattering transforming in monotonously decreasing function at strong scattering and high temperatures. The second kind of this dependence has been also found for d-wave superconductors at intermediate and high temperatures. In contrast, impurity scattering results in decreasing of ξ2/ξc2(B/Bc2) dependence in s++ superconductors. A reasonable agreement between calculated ξh/ξc2 values and those obtained experimentally in nonstoichiometric BaFe2–xCoxAs2 (μSR) and stoichiometric LiFeAs (SANS) was found. The values of ξh/ξc2 are much less than one in case of the first compound and much more than one for the other compound. This is explained by different influence of two factors: the value of impurity scattering rate and pairing symmetry.

Ein schlafend Kind aus "Adrast", D. 137

Konserttitaltiointi Sommerliche Musiktage Hitzacker -festivaaleilta 1973.

Liiketoiminta-analytiikka osana yritysten päätöksentekoa

Liiketoiminta-analytiikka on yksi yritysten suorituskyvyn johtamisen osa-alue, joka on viime aikoina noussut vahvasti esille yritysten kilpailuedun mahdollistavana avaintekijänä. Tämän tutkimuksen tavoitteena oli kartoittaa yritysten liiketoiminta-analytiikan nykytila ja tarpeet Suomessa. Tutkimus on luonteeltaan kvalitatiivinen vertaileva tutkimus. Tutkimuksen empiirinen aineisto kerättiin kahden menetelmän yhdistelmänä. Liiketoiminta-analytiikan hyödyntämisessä edistyneempien yrityksien asiantuntijoille toteutettiin haastattelut. Lisäksi toteutettiin sähköpostitse lomakemuotoinen kyselytutkimus, jotta saavutettaisiin kattavampi näkemys analytiikan markkinoista. Tutkimuksessa on kartoitettu, miten Suomessa ymmärretään liiketoiminta- analytiikan käsite eri yrityksien analytiikan asiantuntijoiden toimesta, sekä minkälaisissa päätöksentekotilanteissa liiketoiminta-analytiikkaa hyödynnetään ja minkälaisilla tavoilla. Lisäksi on selvitetty, miten liiketoiminta-analytiikan kehittämistä ja analytiikan kyvykkyyksiä hallitaan yrityksissä. Liiketoiminta-analytiikka on Suomessa tietyillä toimialoilla erittäin kehittynyttä, mutta yleisesti ollaan jäljessä alan edelläkävijöitä ja esimerkiksi Ruotsia. Liiketoiminta-analytiikan hyödyntäminen ja tarpeet ovat pitkälti kohdistuneet päätöksentekotilanteisiin, joissa yritys kohtaa asiakkaansa. Suurin yksittäinen este liiketoiminta-analytiikan hyödyntämiselle on resurssi- ja osaamisvaje.

Adaptive Markov chain Monte Carlo and Bayesian filtering for state space models

This thesis is concerned with the state and parameter estimation in state space models. The estimation of states and parameters is an important task when mathematical modeling is applied to many different application areas such as the global positioning systems, target tracking, navigation, brain imaging, spread of infectious diseases, biological processes, telecommunications, audio signal processing, stochastic optimal control, machine learning, and physical systems. In Bayesian settings, the estimation of states or parameters amounts to computation of the posterior probability density function. Except for a very restricted number of models, it is impossible to compute this density function in a closed form. Hence, we need approximation methods. A state estimation problem involves estimating the states (latent variables) that are not directly observed in the output of the system. In this thesis, we use the Kalman filter, extended Kalman filter, Gauss–Hermite filters, and particle filters to estimate the states based on available measurements. Among these filters, particle filters are numerical methods for approximating the filtering distributions of non-linear non-Gaussian state space models via Monte Carlo. The performance of a particle filter heavily depends on the chosen importance distribution. For instance, inappropriate choice of the importance distribution can lead to the failure of convergence of the particle filter algorithm. In this thesis, we analyze the theoretical Lᵖ particle filter convergence with general importance distributions, where p ≥2 is an integer. A parameter estimation problem is considered with inferring the model parameters from measurements. For high-dimensional complex models, estimation of parameters can be done by Markov chain Monte Carlo (MCMC) methods. In its operation, the MCMC method requires the unnormalized posterior distribution of the parameters and a proposal distribution. In this thesis, we show how the posterior density function of the parameters of a state space model can be computed by filtering based methods, where the states are integrated out. This type of computation is then applied to estimate parameters of stochastic differential equations. Furthermore, we compute the partial derivatives of the log-posterior density function and use the hybrid Monte Carlo and scaled conjugate gradient methods to infer the parameters of stochastic differential equations. The computational efficiency of MCMC methods is highly depend on the chosen proposal distribution. A commonly used proposal distribution is Gaussian. In this kind of proposal, the covariance matrix must be well tuned. To tune it, adaptive MCMC methods can be used. In this thesis, we propose a new way of updating the covariance matrix using the variational Bayesian adaptive Kalman filter algorithm.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Composição química da biomassa de levedura integral (Saccharomyces sp.) e determinação do valor nutritivo da proteína em células íntegras ou rompidas mecanicamente

Levedura de cerveja foi submetida a estudos analíticos para determinação de sua composição química e a ensaios biológicos em ratos para determinação de seu valor protéico, na forma de células íntegras e com as paredes celulares rompidas mecanicamente, através de um moinho com esferas de vidro (Dynomill). Na composição da biomassa predominam as proteínas (48,52%), os carboidratos (32,92%), minerais (8,32%), RNA (7,52%) e lípides totais (3,4%). O perfil de aminoácidos da proteína é adequado para nutrição humana, superando as recomendações da FAO/WHO/UNU de aminoácidos essenciais, sendo particularmente rica em lisina, podendo ser indicada para complementar a proteína de cereais. O valor protéico determinado através de ensaios biológicos (PER e NPUa) representou 70-80% dos valores para caseína, utilizada como referência.

Farinha integral de trigo germinado: 3. Características nutricionais e estabilidade ao armazenamento

O trigo (Triticum aestivum L.) é usado principalmente para alimentação humana, na forma de farinhas. A germinação pode ser útil para melhorar a qualidade protéica, bem como a de outros nutrientes do trigo, e a estabilidade das farinhas produzidas de trigo germinado é desconhecida. Assim, este trabalho investigou, em laboratório, o efeito da germinação sobre algumas características nutricionais e sobre a estabilidade ao armazenamento de farinhas integrais de trigo germinado por 48 (FITG48), 72 (FITG72) e 96 horas (FITG96). O perfil de aminoácidos das FITGs foi considerado bom, quando comparado com o da farinha controle e com o do padrão teórico da FAO para pré-escolares (2-5 anos). Somente a lisina (primeiro aminoácido limitante) e a treonina das FITGs mostraram valores mais baixos que o do citado padrão. O escore químico (em torno de 56-57) e o escore de aminoácidos corrigido pela digestibilidade protéica (em torno de 54-58) foram mais altos nas FITGs que na farinha integral controle (48 e 42, respectivamente). Com base nesses resultados, as características nutricionais das FITGs foram melhoradas pela germinação de trigo. Com relação à estabilidade ao armazenamento, o pH diminuiu e a acidez álcool-solúvel aumentou de acordo com o tempo de germinação de trigo. As FITGs foram estáveis até 4 meses de armazenamento, com exceção da FITG96, que apresentou alto nível de acidez álcool-solúvel, provavelmente devido à rancidez hidrolítica. O hexanal, uma medida da deterioração oxidativa, foi encontrado somente na farinha controle; nas FITGs não foi detectado, indicando boa estabilidade oxidativa durante 6 meses de armazenamento.

Ocorrência de Bacillus sporothermodurans em leite UAT integral e desnatado

Por sua composição completa e balanceada, o leite é um substrato ideal para o desenvolvimento de diversos grupos de microrganismos. Bactérias, fungos, vírus e outros podem provocar significativas alterações no leite e derivados. Apesar do tratamento a Ultra Alta Temperatura a que o leite longa vida é submetido, constatou-se nos últimos anos, a presença de um novo tipo de bactéria altamente resistente ao calor, denominada Bacillus sporothermodurans, em função de sua capacidade de formação de esporos. O presente trabalho teve como objetivos verificar a presença desta bactéria em leites UAT (Ultra Alta Temperatura) integral e desnatado, comercializados na região do Alto Uruguai - RS e quantificar a capacidade de resistência à altas temperaturas das formas encontradas. Os resultados revelaram a presença desta bactéria em 54,5% das marcas analisadas, com 36,5% dos lotes analisados contaminados. A resistência térmica desta bactéria em relação ao teor de lipídios mostraram tendência a uma maior resistência em leite integral. Pode-se concluir que, embora esta bactéria seja descrita como não patogênica, é importante salientar a importância de novos estudos para obter maiores conhecimentos sobre suas características, uma vez que sua presença mostrou-se comum.

Avaliação da qualidade microbiológica de ovo integral pasteurizado produzido com e sem a etapa de lavagem no processamento

Microrganismos patogênicos podem contaminar ovos em diferentes estágios do processamento. Na tentativa de reduzir problemas decorrentes dessa contaminação por microrganismos patogênicos e/ou deteriorantes, os ovos são submetidos a processos como lavagem da casca e pasteurização. Vários estudos mostraram que alguns agentes químicos utilizados nessa lavagem podem causar danos físicos ao produto, facilitando a entrada de microrganismos através da casca. O nosso objetivo foi avaliar a eficiência da lavagem dos ovos, anteriormente à quebra, na redução da contaminação de ovo integral líquido. Foram colhidas amostras de ovo integral em 3 pontos da linha de produção, provenientes de ovos lavados e não lavados. Foram feitas pesquisa de Salmonella sp e enumeração de S. aureus, L. monocytogenes e bactérias aeróbias. Os resultados foram analisados no nível de significância de 5% e pôde-se concluir que o emprego, ou não, da etapa de lavagem não tem influência na qualidade microbiológica do produto final.