Energy efficiency, resilience to future climates and long-term sustainability: the role of the built environment.

Just under half of all energy consumption in the UK today takes place indoors, and over a quarter within our homes. The challenges associated with energy security, climate change and sustainable consumption will be overcome or lost in our existing buildings. A background analysis, and the scale of the engineering challenge for the next three to four decades, is described in this paper.

Development of miniaturized wireless sensor nodes suitable for building energy management and modelling

Buildings consume 40% of Ireland's total annual energy translating to 3.5 billion (2004). The EPBD directive (effective January 2003) places an onus on all member states to rate the energy performance of all buildings in excess of 50m2. Energy and environmental performance management systems for residential buildings do not exist and consist of an ad-hoc integration of wired building management systems and Monitoring & Targeting systems for non-residential buildings. These systems are unsophisticated and do not easily lend themselves to cost effective retrofit or integration with other enterprise management systems. It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operating buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance based building assessment. The cost of installing additional sensors and meters is extremely high, primarily due to the estimated cost of wiring and the needed labour. From this perspective wireless sensor technology provides the capability to provide reliable sensor data at the required temporal and spatial granularity associated with building energy management. In this paper, a wireless sensor network mote hardware design and implementation is presented for a building energy management application. Appropriate sensors were selected and interfaced with the developed system based on user requirements to meet both the building monitoring and metering requirements. Beside the sensing capability, actuation and interfacing to external meters/sensors are provided to perform different management control and data recording tasks associated with minimisation of energy consumption in the built environment and the development of appropriate Building information models(BIM)to enable the design and development of energy efficient spaces.

The specification and design of an interactive virtual environment for use in teacher training

The original concept was to create a 'simulation' which would provide trainee teachers, specializing in Information and Communications Technology (ICT) with the opportunity to explore a primary school environment. Within the simulation, factors affecting the development and implementation of ICT would be modelled so that trainees would be able to develop the skills, knowledge and understanding necessary to identify appropriate strategies to overcome the limitations. To this end, we have developed Allsorts Primary - the prototype of a simulated interactive environment, representing a typical primary school

A design model: the Autism Spectrum Disorder Classroom Design Kit

Architects and designers have a responsibility to provide an inclusive built environment. However for those with a diagnosis of Autism Spectrum Disorder (ASD), the built environment can be a frightening and confusing place, difficult to negotiate and tolerate. The challenge of integrating more fully into society is denied by an alienating built environment. For ASD pupils in a poorly designed school, their environment can distance them from learning. Instead, if more at ease in their surroundings, in an ASD-friendly environment, the ASD pupil stands a greater chance of doing better.

However a difficulty exists in that most architects are not knowledgeable in designing for those with ASD. Any available design guidelines for architects tend, because of the inherent difficulties associated with a spectrum, to be general in their information. Therefore, if wanting to provide an ASD-friendly learning environment, there is a need to ensure that teachers, as the experts, can most clearly and effectively impart their knowledge and requirements to architects.

This paper sets out the challenges and difficulties inherent in the design process when designing for ASD. It then sets out an alternative strategy to the usual method of drawing-centric dialogue between teacher and architect by using models instead as a basis for a more common language. An ASD Classroom Design Kit was designed and developed by Queen’s University of Belfast Architecture students. It was then used by ASD teaching staff from the Southern Education and Library Board in Northern Ireland as a case study to trial its effectiveness. The paper outlines how the study was carried out before concluding with reflections by both teaching staff and architect on using the ASD Classroom Design Kit.

It is hoped that this paper will firstly highlight the need for better dialogue between expert and architect when considering ASD and the Built Environment and secondly, that it may encourage others to consider using models to convey their ideas and knowledge when designing, not just for ASD, but for other Special Educational Needs and disabilities.

Can publicly available webcameras and mechanical Turks be used to evaluate physical activity policy and built environment change?

Introduction: Fewer than 50% of adults and 40% of youth meet US CDC guidelines for physical activity (PA) with the built environment (BE) a culprit for limited PA. A challenge in evaluating policy and BE change is the forethought to capture a priori PA behaviors and the ability to eliminate bias in post-change environments. The present objective was to analyze existing public data feeds to quantify effectiveness of BE interventions. The Archive of Many Outdoor Scenes (AMOS) has collected 135 million images of outdoor environments from 12,000 webcams since 2006. Many of these environments have experienced BE change. Methods: One example of BE change is the addition of protected bike lanes and a bike share program in Washington, DC.Weselected an AMOS webcam that captured this change. AMOS captures a photograph from eachwebcamevery half hour.AMOScaptured the 120 webcam photographs between 0700 and 1900 during the first work week of June 2009 and the 120 photographs from the same week in 2010. We used the Amazon Mechanical Turk (MTurk) website to crowd-source the image annotation. MTurk workers were paid US$0.01 to mark each pedestrian, cyclist and vehicle in a photograph. Each image was coded 5 unique times (n=1200). The data, counts of transportation mode, was downloaded to SPSS for analysis. Results: The number of cyclists per scene increased four-fold between 2009 and 2010 (F=36.72, p=0.002). There was no significant increase in pedestrians between the two years, however there was a significant increase in number of vehicles per scene (F=16.81, p

Higher education, professionalism and skills in the built environment: the impact of the new urban agenda on teaching and learning

In the mid-to-late 1990s, the New Urban Agenda initiated a rethinking of urban development strategies placing a greater focus on regeneration of central urban spaces. The skills and competencies required by urban planners and built environment professionals to successfully implement regeneration schemes tend to differ from those required for greenfield development. The working paper summarises skills and competencies required by urban regeneration practitioners and how they are delivered through public and/or private sector providers at present. The role of the newly established regional Centres of Excellence and the professional bodies of the Built Environment professions in defining skills and educational requirements and providing training are explored. An analysis of supply and demand of skills training reveals that there is a mismatch rather than a lack of provision. The report draws on a conference where research findings were presented and discussed. It concludes with suggestions for improving the skills provision at the local government as well as community level. Skills audits were found useful tools in defining training needs. A set of sample workshop programmes outline flexible, tailor-made approaches guaranteed to address specific and identified needs.

Professionalism and skills enhancement in the built environment: the role of higher education in a changing policy context in England

Since the election of the Labour Government in 1997 there have been a series of policy initiatives emphasising the importance of co-ordinated and integrated approaches to the delivery of urban regeneration and in particular Sustainable Communities. This changing policy context has given rise to a shortage of practitioners with both the technical skills to deliver specific programmes, and more especially the generic skills to work in multi-disciplinary teams in conjunction with partnership-based management boards. This paper discusses the origins of the debate about skills shortages and deficiencies and reviews the main government reports which have advocated a new approach to the provision of skills for community regeneration. It focuses particularly on the work of the Planning Network which was funded by the Centre for Education in the Built Environment (CEBE) to examine the contribution of higher education to the wider skills debate. It concludes by arguing that higher education has an important part to play in the provision of a more appropriate skills set for professional practice within a broader and more inclusive strategy involving all key stakeholders. However, employers also have a major responsibility in ensuring that key skills are maintained and enhanced within their own organisations.