Study on effect of optical wavelength on photo induced strain sensitivity in carbon nanotubes using fiber Bragg grating

In this work, the role of optical wavelength on the photo induced strain in carbon nanotubes (CNT) is probed using a Fiber Bragg Grating (FBG), upon exposure to infrared (IR) (21 mu epsilon mW(-1)) and visible (9 mu epsilon mW(-1)) radiations. The strain sensitivity in CNT is monitored over a smaller range (10(-3) to 10(-9) epsilon) by exposing to a low optical power varying in the range 10(-3) to 10(-6) W. In addition, the wavelength dependent response and recovery periods of CNT under IR (tau(rise) = 150 ms, tau(fall) = 280 ms) and visible (tau(rise) = 1.07 s, tau(fall) = 1.18 s) radiations are evaluated in detail. This study can be further extended to measure the sensitivity of nano-scale photo induced strains in nano materials and opens avenues to control mechanical actuation using various optical wavelengths.

Photoinduced DNA Crosslink Formation by Dichloridooxidovanadium(IV) Complexes of Polypyridyl Bases

Oxidovanadium(IV) complexes VO(pyphen)Cl-2] (1) and VO(pydppz)Cl-2] (2), where pyphen is 2-(2-pyridyl)-1,10-phenanthroline and pydppz is 3-(pyridin-2-yl)dipyrido3,2-a:2,3-c]phenazine, show remarkable photoinduced DNA crosslinking ability and photocytotoxicity. The complexes are non-electrolytes in DMF, 1:1 electrolytes in 20% aqueous DMF, and 1:2 electrolytes in 20% aqueous DMF upon photoirradiation with visible light of 400-700 nm. The paramagnetic complexes, which have one unpaired electron, show a d-d band near 780 nm in aqueous DMF. The IR data suggest a V=O moiety trans to a V-N bond. Complex VO(pydppz)Cl-2] (2), as a novel photoinducible nuclear ds-DNA crosslinking agent, shows visible-light-induced cytotoxicity in HeLa and MCF-7 cancer cells by an apoptotic pathway, giving IC50 values of 0.87 +/- 0.07 and 1.4 +/- 0.2 M, respectively, while being essentially nontoxic (IC50 > 40 M) in the dark and less toxic in normal MCF-10A cells.

Energy-savvy solid-state and sonochemical synthesis of lithium sodium titanate as an anode active material for Li-ion batteries

Lithium sodium titanate insertion-type anode has been synthesized by classical solid-state (dry) and an alternate solution-assisted (wet) sonochemical synthesis routes. Successful synthesis of the target compound has been realized using simple Na- and Li-hydroxide salts along with titania. In contrast to the previous reports, these energy-savvy synthesis routes can yield the final product by calcination at 650 -750 degrees C for limited duration of 1-10 h. Owing to the restricted calcination duration (dry route for 1-2 h and wet route for 1-5 h), they yield homogeneous nanoscale lithium sodium titanate particles. Sono-chemical synthesis reduces the lithium sodium titanate particle size down to 80-100 nm vis-a-vis solid-state method delivering larger (200-500 nm) particles. Independent of the synthetic methods, the end products deliver reversible electrochemical performance with reversible capacity exceeding 80 mAh.g(-1) acting as a 1.3 V anode for Li-ion batteries. (C) 2015 Elsevier B.V. All rights reserved.

Integrating AlGaN/GaN high electron mobility transistor with Si: A comparative study of integration schemes

AlGaN/GaN high electron mobility transistor stacks deposited on a single growth platform are used to compare the most common transition, AlN to GaN, schemes used for integrating GaN with Si. The efficiency of these transitions based on linearly graded, step graded, interlayer, and superlattice schemes on dislocation density reduction, stress management, surface roughness, and eventually mobility of the 2D-gas are evaluated. In a 500 nm GaN probe layer deposited, all of these transitions result in total transmission electron microscopy measured dislocations densities of 1 to 3 x 10(9)/cm(2) and <1 nm surface roughness. The 2-D electron gas channels formed at an AlGaN-1 nm AlN/GaN interface deposited on this GaN probe layer all have mobilities of 1600-1900 cm(2)/V s at a carrier concentration of 0.7-0.9 x 10(13)/cm(2). Compressive stress and changes in composition in GaN rich regions of the AlN-GaN transition are the most effective at reducing dislocation density. Amongst all the transitions studied the step graded transition is the one that helps to implement this feature of GaN integration in the simplest and most consistent manner. (C) 2015 AIP Publishing LLC.

GRMHD formulation of highly super-Chandrasekhar rotating magnetized white dwarfs: stable configurations of non-spherical white dwarfs

Here we extend the exploration of significantly super-Chandrasekhar magnetized white dwarfs by numerically computing axisymmetric stationary equilibria of differentially rotating magnetized polytropic compact stars in general relativity (GR), within the ideal magnetohydrodynamic regime. We use a general relativistic magnetohydrodynamic (GRMHD) framework that describes rotating and magnetized axisymmetric white dwarfs, choosing appropriate rotation laws and magnetic field profiles (toroidal and poloidal). The numerical procedure for finding solutions in this framework uses the 3 + 1 formalism of numerical relativity, implemented in the open source XNS code. We construct equilibrium sequences by varying different physical quantities in turn, and highlight the plausible existence of super-Chandrasekhar white dwarfs, with masses in the range of 2-3 solar mass, with central (deep interior) magnetic fields of the order of 10(14) G and differential rotation with surface time periods of about 1-10 s. We note that such white dwarfs are candidates for the progenitors of peculiar, overluminous Type Ia supernovae, to which observational evidence ascribes mass in the range 2.1-2.8 solar mass. We also present some interesting results related to the structure of such white dwarfs, especially the existence of polar hollows in special cases.

Role of Si modification on the compressive flow behavior of Al-Si based alloy

The flow characteristics of a near-eutectic heat-treated Al-Si based cast alloy have been examined in compression at strain rates varying from 3 x 10(-4) to 10(2) s(-1) and at three different temperatures, i.e., room temperature (RT), 100 degrees C and 200 degrees C. The dependence of flow behavior on modification is examined by testing the alloy in both the unmodified and modified conditions. Modification has strong influence on strain rate sensitivity (SRS), strength and work hardening behavior of the alloy. The strength of the alloy is found to increase with increase in strain rate for both the conditions. The increase is more rapid above the strain rate of 10(-1) s(-1) for the unmodified alloy at all the temperatures. This rapid increase is observed at 1 s(-1) at RT and 100 degrees C, and at 10(-2) s(-1) at 200 degrees C for the modified alloy. The thermally dependent process of the Al matrix is rate controlling in the unmodified alloy. On the other hand, the thermally dependent process of both Al matrix and Si particles are rate controlling, which is responsible for the higher strain rate sensitivity (SRS) in the modified alloy. The unmodified alloy exhibits a larger work hardening rate than the modified alloy during the initial stages of straining due to fiber loading of unmodified Si particles. However, the hardening rate decreases sharply at higher strains for the unmodified alloy due to a higher rate of Si particle fracture. Thermal softening is observed for both alloys at 200 degrees C due to precipitate coarsening, which leads to a decrease in SRS at higher temperatures. Stress simulations by microstructure based finite element method support the experimentally observed particle and matrix fracture behavior. Negative SRS and serrated flow are observed at lower strain rate regime (3 x 10(-4) to 10(-2) s(-1)) at RT and 100 degrees C, in both alloys. The critical onset strain is found to be lower and the magnitude of serration is found to be higher for the modified alloy, which suggests that, in addition to dynamic strain aging, Si particle size and morphology also play a role in serrated flow. (C) 2015 Elsevier Inc All rights reserved.

Experimental solubilities of two lipid derivatives in supercritical carbon dioxide and new correlations based on activity coefficient models

The solubilities of two lipid derivatives, geranyl butyrate and 10-undecen-1-ol, in SCCO2 (supercritical carbon dioxide) were measured at different operating conditions of temperature (308.15 to 333.15 K) and pressure (10 to 18 MPa). The solubilities (in mole fraction) ranged from 2.1 x 10(-3) to 23.2 x 10(-3) for geranyl butyrate and 2.2 x 10(-3) to 25.0 x 10(-3) for 10-undecen-1-ol, respectively. The solubility data showed a retrograde behavior in the pressure and temperature range investigated. Various combinations of association and solution theory along with different activity coefficient models were developed. The experimental data for the solubilities of 21 liquid solutes along with geranyl butyrate and 10-undecen-1-ol were correlated using both the newly derived models and the existing models. The average deviation of the correlation of the new models was below 15%.

Stable p-type conductivity in B and N co-doped ZnO epitaxial thin film

We report on the observation of stable p-type conductivity in B and N co-doped epitaxial ZnO thin films grown by pulsed laser deposition. Films grown at higher oxygen partial pressure (similar to 10(-1) Torr) shows p-type conductivity with a carrier concentration of similar to 3 x 10(16) cm(-3). This p-type conductivity is associated with the significant decrease in defect emission peaks due to the vacancy oxygen (V-O) and Schottky type-I native defects compared to films grown at low oxygen partial pressure (similar to 10(-5) Torr). The p-type conductivity is explained with the help of density functional theory (DFT) calculation considering off-stoichiometric BN1+x in the ZnO lattice. (C) 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Remarkable photo-induced anticancer activity of vitamin-S6 Schiff base copper(II) complexes of pyridyl bases

Vitamin-B6 (VB6) Schiff base (H2L) copper(II) complexes of pyridyl bases, viz. Cu(bpy)(L)] (1), Cu(phen)(L)] (2) and Cu(dppz)(L)] (3), where bpy is 2,2'-bipyridine, phen is 1,10-phenanthroline and dppz is dipyrido3,2-a:2',3'c]phenazine are synthesized, characterized and their phto-induced anticancer activity studied. The non-electrolytic one electron paramagnetic complexes exhibit a d-d band near 700 nm in DMF. The dppz complex intercalatively binds to calf-thymus DNA with binding constant (K-b) values of similar to 10(6) M-1. This complex exhibits low chemical nuclease activity but excellent DNA photocleavage activity when irradiated with red light of 705 nm forming (OH)-O-center dot radical. It displays remarkable photocytotoxicity in human cervical cancer cells (HeLa) giving IC50 value of 0.9 mu M in visible light (400-700 nm) while being less toxic in darkness (IC50 : 23 mu M). The cellular uptake of the complexes seems to be via VB6 transporting membrane carrier mediated diffusion pathway. Photo-induced cell death follows apoptotic pathway involving photo-generated intracellular reactive oxygen species.

表面纳米化Zr的拉伸性能

利用表面机械研磨处理(SMAT)技术在Zr片状拉伸样品表面施加剧烈变形,获得超细/纳米晶粒组织的变形细化表层,其中Zr板厚度1 mm,两侧变形层厚度均为100μm.拉伸实验结果表明,表层细化组织提高了屈服强度和抗拉强度,使加工硬化能力及伸长率下降.应变速率在10~(-4)～10~(-3)s~(-1)范围时,拉伸强度随应变速率的提高而提高;应变速率增大至10~(-2)s~(-1)量级时,抗拉强度下降.扫描电镜观察显示出韧性韧窝状断裂特征.

Evaluación de tres densidades de siembra de Clitoria spp. en la producción de biomasa forrajera en base a materia seca

El presente trabajo preliminar tuvo como objetivo evaluar, el efecto de tres densidades de siembra, sobre la producción de biomasa forrajera en base a materia seca de Clitoria spp. bajo riego en época seca y su valor económico. El estudio se llevó a cabo en la Hacienda "Santa Rosa", ubicada al norte de la comunidad de Sabana Grande, Municipio de Managua. Se utilizó un diseño de bloques completos al azar (BCA), en un arreglo sencillo de tres densidades de siembra, con 42, 63 y 84 kg/ha. Se realizaron dos cortes; el primero, a los 57 días después de su establecimiento y, el segundo, 57 días después de realizado el primer corte. Los resultados mostraron que, las densidades de siembra sobre la producción de biomasa en base a materia seca total por hectárea (PBMSTH}, para cada momento de corte realizado, reflejó su mayor valor en la densidad de 84 kg/ha, con 3.153 y 4.433 ton/MS/há para el 1 10 y 2do corte, sin embargo, estos no tuvieron diferencias significativas (P>0.05) sobre las demás densidades (42 y 63 kg/ha), respectivamente. Por otra parte, las variables altura (ALT) y cobertura (COB) mostraron su mayor valor para la densidad (84 kg/ha), con 59.87 cm y 93.33 o/o respectivamente, pero estos no presentaron diferencias significativas (P>0.05) sobre las demás densidades. La prueba de rangos múltiples de Tukey, para los efectos de densidad de siembra sobre la PBMSTH, ALT y COB, no presentaron diferencias significativas. (P> 0.05; P> 0.01). De todas las densidades evaluadas, los menores costos de producción de forraje fueron para la densidad 42 kg/ha con C$ 4127.00.

Investigation of Mn-Implanted n-Type Ge

Mn+ irons were implanted to n-type Ge(1 1 1) single crystal at room temperature with an energy of 100 keV and a dose of 3 x 10(16) cm(-2). Subsequently annealing was performed at 400degreesC for 1 h under flowing nitrogen gas. X-ray diffraction measurements show that as-implanted sample is amorphous and the structure of crystal is restored after annealing. Polycrystalline germanium is formed in annealed sample. There are no new phases found except germanium. The samples surface morphologies indicate that annealed sample has island-like feature while there is no such kind of characteristic in as-implanted sample. The elemental composition of annealed sample was analyzed by Auger electron spectroscopy. It shows that manganese ions are deeply implanted into germanium substrate and the highest manganese atomic concentration is 8% at the depth of 120 nm. The magnetic properties of samples were investigated by an alternating gradient magnetometer. The annealed sample shows ferromagnetic behavior at room temperature.

Efecto de distintos nutrientes sobre el rendimiento y la calidad de soja no GMO en América, provincia de Buenos Aires

Resumen: El desarrollo genético de variedades de soja en la Argentina se ha inclinado hacia la búsqueda de altos rendimientos sin tener en cuenta la calidad del grano, en cuanto a porcentaje de proteína. Por esta razón existe la necesidad de buscar prácticas de manejo que aumenten el mismo. En el presente ensayo, se evaluó el efecto de distintas estrategias de fertilización sobre el porcentaje de proteína, aceite y rendimiento de una variedad de soja no GMO y High Pro, en la localidad de América, provincia de Buenos Aires. Los tratamientos fueron: 1. Testigo, 2. 22 kg P ha-1, 3. 22 kg P ha-1 + 13.2 kg S ha-1, 4. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1, 5. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 10 kg N ha-1, 6. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 20 kg N ha-1, 7. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 1,3 kg Zn ha-1, y 8. 44 kg P ha-1 + 26.4 kg S ha-1. Para el caso de P, S y Zn, se aplicaron al suelo un mes antes de la siembra, en cambio el B y N fueron aplicados de manera foliar en los estadios R2 y R5 del cultivo, respectivamente. El rendimiento promedió 4598 kg ha-1, el porcentaje de proteína promedió 45,1% y el de aceite 17.4%. Los tratamientos no arrojaron diferencias significativas en cuanto a rendimiento ni proteína, pero sí la aplicación de Zn, que produjo un aumento significativo en el porcentaje de aceite (10,4%).

一种基于RS—485网络的集散型控制系统

从系统构成和通信软件两方面介绍了一种基于RS-485网络的集散型控制系统。该系统的RS-485网络由1台工控机和10台可编程控制器构成。工控机通过RS-485网络控制10台独立的3自由度数控液压小车。本文提出了一种RS-485网络通信协议。

Evaluación agronómica con enfoque agroecológico en un sistema diversificado de guayaba (Psidium guajava L.), nopal (Opuntia ficus L.), piña (Ananas comosus L.) y papaya (carica papaya L.) utilizando vermicompost, Managua, Nicaragua, 2009-2011

Con el propósito de responder a preguntas de orden nutricional y biológico del suelo con un enfoque agroecológico se desarrolló el presente trabajo, en un terreno calcáreo, no salino, que permaneció en barbecho cinco años antes de iniciado el estudio. Se evaluó la implementación de una diversificación de cultivos (guayaba, nopal, piña y papaya) y tres dosis de vermicompost (a 1 :10, a 2 :15 y a 3 :20 t (ha año) - 1 . La investigación se inició en mayo del 2009 hasta diciembre del 2011 y el diseño usado fue cuasiexperimental en franjas pareadas. Las características físicas - químicas de suelo analizadas fueron: pH en H 2 O, materia orgánica , N, arena, limo y arcilla en %; P disponible, Fe, Cu, Mn y Zn en ppm; K disponible, Ca y Mg en meq, conductividad eléctrica en μS/cm y la relación C/N. Desde el punto de vista biológico del suelo se determinaron presencia de hongos, bacterias y actinomicetos. Antes de iniciar el estudio en 2009, y durante el ensayo, se determinaron las variables físicas, químicas y biológicas del suelo. Para la interpretación agronómica de la nutrición para cada cultivo se hizo un análisis combinado entre los resultados de las propiedades físico - químicas y los rangos definidos para cada cultivo por la metodología propuesta por Quintana (1983) . La diversificación de cultivos, influyó sobre las propiedades físicas, químicas y biológicas del suelo. En el cultivo de guayaba si se aplica 20 t (ha año) - 1 hay que realizar aplicaciones suplementarias de Cu. Aplicaciones de a 1 y a 2 en nopal y papaya respectivamente, además de aplicaciones complementarias de Cu, también necesitan suplemento de P. Sin efecto antropogénico los microorganismos que predominaron fueron bacterias del género Bacillus y esporádicamente Pseudomona y Sarcina . Con la diversificación de cultivos y aplicaciones de vermicompost se incrementó la diversidad de géneros de microorganismos. El total de géneros de microorganismos, al concluir el estudio fueron 13; de éstos 10 fueron diferentes (Cinco hongos: Curvularia, A spergillus, Pestalotia, Fusarium, Penicillium ; cuatro bacterias: Serratia, Erwinia, Sporolactobacillus y Caryophanon y un actinomiceto: Streptomyces). Variables del crecimiento en el cultivo de guayaba demostraron que con un mayor número de ramas terciarias existe un 70 % de probabilidad de tener más frutos comerciales. En nopal, el tratamiento con los mejores resultados para variables del crecimiento es 15 t (ha año) - 1 cosechado cada 90 días. Para piña, se encontró resultados superiores con 10 t (ha año) - 1 . Papaya obtuvo los mejores resultados con 20 t (ha año) - 1 . Con el cultivo de guayaba el mejor rendimiento se alcanzó utilizando 20 t (ha año) - 1 . En nopal un mayor número de cladodios se alcanza aplicando 15 t (ha año) - 1 cosechado cada 30 días. Un mayor peso en el cladodio se obtiene al aplicar 20 t (ha año) - 1 , cosechado cada 90 días. La piña obtiene mayor número de frutos aplicando 15 t (ha año) - 1 . En el cultivo de papaya un mayor número de frutos cosechados fue alcanzado con 15 - 20 t (ha año) - 1.