Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Monotherapy and combined therapy of new potential antitumor compounds: antiproliferative activities and biological targets

Review article Martins, P., Marques, M., Coito, L., Pombeiro, A.J.L., Baptista, P.V., Fernandes, A.R. 2014. Organometallic Compounds in Cancer Therapy: Past Lessons and Future Directions. Anti-cancer Agents in Medicinal Chemistry 14. PMID: 25173559

Development of bio-batteries based on electrospun membranes

Fundação para a Ciência e a Tecnologia (FCT-MCTES) under the grant SFRH/BD/69306/2010

Identifying the urban communities of New York City using bikeshare data from NYC citibike

This study identifies a measure of the cultural importance of an area within a city. It does so by making use of origindestination trip data and the bike stations of the bike share system in New York City as a proxy to study the city. Rarely is movement in the city studied at such a small scale. The change in strength of the similarity of movement between each station is studied. It is the first study to provide this measure of importance for every point in the system. This measure is then related to the characteristics which make for vibrant city communities, namely highly mixed land use types. It reveals that the spatial pattern of important areas remains constant over differing time periods. Communities are then characterised by the land uses surrounding these stations with high measures of importance. Finally it identifies the areas of global cultural importance alongside the areas of local importance to the city.

Genetic diversity of dengue virus serotypes 1 and 2 in the State of Paraná, Brazil, based on a fragment of the capsid/premembrane junction region

INTRODUCTION: The precise identification of the genetic variants of the dengue virus is important to understand its dispersion and virulence patterns and to identify the strains responsible for epidemic outbreaks. This study investigated the genetic variants of the capsid-premembrane junction region fragment in the dengue virus serotypes 1 and 2 (DENV1-2). METHODS: Samples from 11 municipalities in the State of Paraná, Brazil, were provided by the Central Laboratory of Paraná. They were isolated from the cell culture line C6/36 (Aedes albopictus) and were positive for indirect immunofluorescence. Ribonucleic acid (RNA) extracted from these samples was submitted to the reverse transcription polymerase chain reaction (RT-PCR) and nested PCR. RESULTS: RT-PCR revealed that 4 of the samples were co-infected with both serotypes. The isolated DENV-1 sequences were 95-100% similar to the sequences of other serotype 1 strains deposited in GenBank. Similarly, the isolated DENV-2 sequences were 98-100% similar to other serotype 2 sequences in GenBank. According to our neighbor-joining tree, all strains obtained in this study belonged to genotype V of DENV-1. The DENV-2 strains, by contrast, belonged to the American/Asian genotypes. CONCLUSIONS: The monitoring of circulating strains is an important tool to detect the migration of virus subtypes involved in dengue epidemics.

The economic valuation of noise reduction projects: A cost-benefit analysis approach

The main purpose of this Work Project consists in performing a practical Cost-Benefit Analysis from a social perspective of two noise reduction projects in industrial sites that aim at complying with the existing regulation. By doing so, one may expect a more comprehensive view of the benefits and costs of both projects, as well as relevant insight to the way noise exposure regulation must be optimally defined in Portugal and within the EU area.

Report of new cases of Trypanosoma caninum in Brazil

INTRODUCTION: Trypanosoma caninum is a protozoan species recently described in dogs, whose occurrence has been reported in areas of overlap with visceral leishmaniasis. METHODS: Trypanosoma sp. were isolated from nine dogs and characterized by molecular methods. RESULTS: PCR and sequencing confirmed the presence of T. caninum in all dogs, revealing two new areas of transmission: Barra Mansa and São João do Piauí. CONCLUSIONS: The nine new cases described, when added to those already published, account for 62 cases of natural infection by T. caninum and show the geographical spread of this species to new areas, where other trypanosomatids circulate.

Historical reconstructions of raw materials based on a blue smalt coating applied to a seventeenth-century altarpiece

Based on samples cross-sections from the Main Altarpiece of the Coimbra Old Cathedral, where a blue coating performed in 1685 is observed (that was partly covered with a Prussian blue-containing overpaint), the raw materials present in this coating were reproduced and studied. Blue areas were painted with smalt in oil, according to the contract signed by Manoel da Costa Pereira in 1684 and the analysis by Le Gac in 2009. Based on these, three batches of cobalt-based glasses (S1, S2 and S3) were heated and melted in alumina crucibles in the kiln. S1 contained 6.03 % of cobalt oxide, S2 contained 2.10 %, with the addition of 1.49 % of magnesium oxide, and S3 contained 6.82 % of cobalt oxide, with the addition of 4.63% of antimony trioxide. These batches were ground mechanically with water and manually with different vehicles stated in recipes. The results were studied by means of OM, SEM-EDS, X-Ray CT, Colorimetry and Vickers HT. Different binders were also produced and analyzed by means of μ-FTIR, in order to perform their characterization and obtain Standard Spectra. Since anhydrite was identified in the ground layers, gypsum from Óbidos was also characterized by XRD. The main goal of this thesis was to study all the raw materials present in the 1685-blue coating, in order to allow the historically accurate reconstruction of the layers build-up in the next future.

Basel III: The impact of new capital requirements on profitability of Portuguese Banks

This empirical study aims to explore the impact of increased capital ratio requirements, on the ROE of the Portuguese banking sector. The paper employs both a quantitative- and qualitative approach, with the qualitative approach as the main method of research. The method adopted to conduct the qualitative research was semi structured elite interviews with banking executives. Higher capital requirements decrease the ROE of banks in Portugal, but huge impairments charges, macroeconomic factors and increased costs of deposits are clearly the dominant reasons for the reduced levels of ROE the past years. Among the measures taken to increase capital ratios, reduction of RWAs and non-core assets have been the main focus, but the issuance of CoCos is regarded as the most expensive measure due to high interest payments. However, the CoCos will not have any effect on the ROE in the long term. It is difficult to draw any conclusions on the impact of more equity in the balance sheet on the ROE of Portuguese banks, as many banks currently don’t generate enough money to pay back on shareholders´ investments.

Monte Carlo valuation of worst-of auto-callable equity swaps

This thesis proposes a Monte Carlo valuation method for Worst-of Auto-callable equity swaps. The valuation of this type of swap usually requires complex numerical methods which are implemented in “black-box” valuation systems. The method proposed is an alternative benchmark tool that is relatively simple to implement and customize. The performance of the method was evaluated according to the variance and bias of the output and to the accuracy when compared to a leading valuation system in the market.

Asking why

The growth of a solid, knowledge-intensive firm, OutSystems—an IT company recognized in 2003 by Fortune magazine as one of the most promising start-ups in the world—is accompanied by efforts to create a strong culture that preserves the traits that have driven OutSystems’ success and that drives innovation, adaptability, high performance, and accountability. The lessons OutSystems learned from previous international experiences are presented along with its latest growth model of branded local partners. The case study is intended to introduce concepts related to organizational culture, traits of cultures that drive innovation, national versus organizational culture, and the challenges of globalization. It is designed to be used in Organizational Behavior classes and is appropriate for MBA- and Master’s-level courses in the area of management. It is suggested as a guideline for 60- to 90-minute classes. Participants are invited to discuss the importance of organizational cultures and their fit with the company strategy. Participants are also encouraged to brainstorm about the best approach to face OutSystems’ new stage of growth, specifically the advantages and consequences of growing as a metanational company. Finally, in the conclusion, the most relevant findings taken from the discussions proposed are revisited: The importance of an organizational culture adapted to the market needs and the potential of innovation behind metanational companies. Other considerations are made about: how the case illustrates the importance of leadership, group age, and group size in the process of building a culture; and how OutSystems’ culture solves the apparent contradiction behind adaptable culture.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Design of a case-based reasoner for information security in military organizations

Information security is concerned with the protection of information, which can be stored, processed or transmitted within critical information systems of the organizations, against loss of confidentiality, integrity or availability. Protection measures to prevent these problems result through the implementation of controls at several dimensions: technical, administrative or physical. A vital objective for military organizations is to ensure superiority in contexts of information warfare and competitive intelligence. Therefore, the problem of information security in military organizations has been a topic of intensive work at both national and transnational levels, and extensive conceptual and standardization work is being produced. A current effort is therefore to develop automated decision support systems to assist military decision makers, at different levels in the command chain, to provide suitable control measures that can effectively deal with potential attacks and, at the same time, prevent, detect and contain vulnerabilities targeted at their information systems. The concept and processes of the Case-Based Reasoning (CBR) methodology outstandingly resembles classical military processes and doctrine, in particular the analysis of “lessons learned” and definition of “modes of action”. Therefore, the present paper addresses the modeling and design of a CBR system with two key objectives: to support an effective response in context of information security for military organizations; to allow for scenario planning and analysis for training and auditing processes.