Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC)

Solid oxide fuel cell (SOFC) is an electrochemical device that converts chemical energy into electric power with high efficiency. Traditional SOFC has its disadvantages, such as redox cycling instability and carbon deposition while using hydrocarbon fuels. It is because traditional SOFC uses Ni-cermet as anode. In order to solve these problems, ceramic anode is a good candidate to replace Ni. However, the conductivity of most ceramic anode materials are much lower than Ni metal, and it introduces high ohmic resistance. How to increase the conductivity is a hot topic in this research field. Based on our proposed mechanism, several types of ceramic materials have been developed. Vanadium doped perovskite, Sr1-x/2VxTi1-xO3 (SVT) and Sr0.2Na0.8Nb1-xVxO3 (SNNV), achieved the conductivity as high as 300 S*cm-1 in hydrogen, without any high temperature reduction. GDC electrolyte supported cell was fabricated with Sr0.2Na0.8Nb0.9V0.1O3 and the performance was measured in hydrogen and methane respectively. Due to vanadium’s intrinsic problems, the anode supported cell is not easy. Fe doped double perovskite Sr2CoMoO6 (SFCM) was also developed. By carefully doping Fe, the conductivity was improved over one magnitude, without any vigorous reducing conditions. SFCM anode supported cell was successfully fabricated with GDC as the electrolyte. By impregnating Ni-GDC nano particles into the anode, the cell can be operated at lower temperatures while having higher performance than the traditional Ni-cermet cells. Meanwhile, this SFCM anode supported SOFC has long term stability in the reformate containing methane. During the anode development, cathode improvement caused by a thin Co-GDC layer was observed. By adding this Co-GDC layer between the electrolyte and the cathode, the interfacial resistance decreases due to fast oxygen ion transport. This mechanism was confirmed via isotope exchange. This Co-GDC layer works with multiple kinds of cathodes and the modified cell’s performance is 3 times as the traditional Ni-GDC cell. With this new method, lowering the SOFC operation temperature is feasible.

Diversity in intermediate care

This paper discusses the evolution of intermediate care and presents some interim observations from a survey of providers in England being conducted as part of a national evaluation of intermediate care. Telephone interviews covering various issues concerning the level of provision and style of delivery of intermediate care have been conducted with 70 services to date. Data from these are used to discuss the progress, range and nature of intermediate care in relation to clinician viewpoints and academic and official literature on the subject. Intermediate care ‘on the ground’ is a multiplicitous entity, with provision apparently evolving in accordance with the particularities of local need. Whilst protocols for medical involvement in intermediate care generally appear to be well established, there are some tensions concerning integration of services in a locality, care management processes and questions of flexibility and inclusiveness in relation to eligibility criteria. The definitive version is available at www.blackwell-synergy.com

The organization, form and function of intermediate care services and systems in England: results from a national survey

This paper reports the results of a postal survey of intermediate care co-ordinators (ICCs) on the organization and delivery of intermediate care services for older people in England, conducted between November 2003 and May 2004. Questionnaires, which covered a range of issues with a variety of quantitative, ‘tick-box’ and open-ended questions, were returned by 106 respondents, representing just over 35% of primary care trusts (PCTs). We discuss the role of ICCs, the integration of local systems of intermediate care provision, and the form, function and model of delivery of services described by respondents. Using descriptive and statistical analysis of the responses, we highlight in particular the relationship between provision of admission avoidance and supported discharge, the availability of 24-hour care, and the locations in which care is provided, and relate our findings to the emerging evidence base for intermediate care, guidance on implementation from central government, and debate in the literature. Whilst the expansion and integration of intermediate care appear to be continuing apace, much provision seems concentrated in supported discharge services rather than acute admission avoidance, and particularly in residential forms of post-acute intermediate care. Supported discharge services tend to be found in residential settings, while admission avoidance provision tends to be non-residential in nature. Twenty-four hour care in non-residential settings is not available in several responding PCTs. These findings raise questions about the relationship between the implementation of intermediate care and the evidence for and aims of the policy as part of NHS modernization, and the extent to which intermediate care represents a genuinely novel approach to the care and rehabilitation of older people.

The Southeast Indian Ridge between 88°E and 118°E: Gravity anomalies and crustal accretion at intermediate spreading rates

Although slow spreading ridges characterized by a deep axial valley and fast spreading ridges characterized by an axial bathymetric high have been extensively studied, the transition between these two modes of axial morphology is not well understood. We conducted a geophysical-survey of the intermediate spreading rate Southeast Indian Ridge between 88 degrees E and 118 degrees E, a 2300-km-long section of the ridge located between the Amsterdam hot spot and the Australian-Antarctic Discordance where satellite gravity data suggest that the Southeast Indian Ridge (SEIR) undergoes a change from an axial high in the west to an axial valley in the east. A basic change in axial morphology is found near 103 degrees 30'E in the shipboard data; the axis to the west is marked by an axial high, while a valley is found to the east. Although a well-developed axial high, characteristic of the East Pacific Rise (EPR), is occasionally present, the more common observation is a rifted high that is lower and pervasively faulted, sometimes with significant (> 50 m throw) faults within a kilometer of the axis. A shallow axial valley (< 700 m deep) is observed from 104 degrees E to 114 degrees E with a sudden change to a deep (>1200 m deep) valley across a transform at 114 degrees E. The changes in axial morphology along the SEIR are accompanied by a 500 m increase in near-axis ridge flank depth from 2800 m near 88 degrees E to 3300 m near 114 degrees E and by a 50 mGal increase in the regional level of mantle Bouguer gravity anomalies over the same distance, The regional changes in depth and mantle Bouguer anomaly (MBA) gravity can be both explained by a 1.7-2.4 km change in crustal thickness or by a mantle temperature change of 50 degrees C-90 degrees C. In reality, melt supply (crustal thickness) and mantle temperature are linked, so that changes in both may occur simultaneously and these estimates serve as upper bounds. The along-axis MBA gradient is not uniform. Pronounced steps in the regional level of the MBA gravity occur at 103 degrees 30'E-104 degrees E and at 114 degrees E-116 degrees E and correspond to the changes in the nature of the axial morphology and in the amplitude of abyssal hill morphology suggesting that the different forms of morphology do not grade into each other but rather represent distinctly different forms of axial (s)tructure and tectonics with a sharp transition between them. The change from an axial high to an axial valley requires a threshold effect in which the strength of the lithosphere changes quickly. The presence or absence of a quasi-steady state magma chamber may provide such a mechanism. The different forms of axial morphology are also associated with different intrasegment MBA gravity patterns. Segments with an axial high have an MBA low located at a depth minimum near the center of the segment, At EPR-like segments, the MBA low is about 10 mGal with along-axis gradients of 0.15-0.25 mGal/km, similar to those observed at the EPR, Rifted highs have a shallower low and lower gradients suggesting an attenuated composite magma chamber and a reduced and perhaps episodic melt supply. Segments with a shallow axial valley have very flat along-axis MBA profiles with little correspondence between axial depth and axial MBA gravity.

The relationship between early and intermediate level spatial vision during typical development and in autism spectrum disorder

Certaines recherches ont investigué le traitement visuel de bas et de plus hauts niveaux chez des personnes neurotypiques et chez des personnes ayant un trouble du spectre de l’autisme (TSA). Cependant, l’interaction développementale entre chacun de ces niveaux du traitement visuel n’est toujours pas bien comprise. La présente thèse a donc deux objectifs principaux. Le premier objectif (Étude 1) est d’évaluer l’interaction développementale entre l’analyse visuelle de bas niveaux et de niveaux intermédiaires à travers différentes périodes développementales (âge scolaire, adolescence et âge adulte). Le second objectif (Étude 2) est d’évaluer la relation fonctionnelle entre le traitement visuel de bas niveaux et de niveaux intermédiaires chez des adolescents et des adultes ayant un TSA. Ces deux objectifs ont été évalué en utilisant les mêmes stimuli et procédures. Plus précisément, la sensibilité de formes circulaires complexes (Formes de Fréquences Radiales ou FFR), définies par de la luminance ou par de la texture, a été mesurée avec une procédure à choix forcés à deux alternatives. Les résultats de la première étude ont illustré que l’information locale des FFR sous-jacents aux processus visuels de niveaux intermédiaires, affecte différemment la sensibilité à travers des périodes développementales distinctes. Plus précisément, lorsque le contour est défini par de la luminance, la performance des enfants est plus faible comparativement à celle des adolescents et des adultes pour les FFR sollicitant la perception globale. Lorsque les FFR sont définies par la texture, la sensibilité des enfants est plus faible comparativement à celle des adolescents et des adultes pour les conditions locales et globales. Par conséquent, le type d’information locale, qui définit les éléments locaux de la forme globale, influence la période à laquelle la sensibilité visuelle atteint un niveau développemental similaire à celle identifiée chez les adultes. Il est possible qu’une faible intégration visuelle entre les mécanismes de bas et de niveaux intermédiaires explique la sensibilité réduite des FFR chez les enfants. Ceci peut être attribué à des connexions descendantes et horizontales immatures ainsi qu’au sous-développement de certaines aires cérébrales du système visuel. Les résultats de la deuxième étude ont démontré que la sensibilité visuelle en autisme est influencée par la manipulation de l’information locale. Plus précisément, en présence de luminance, la sensibilité est seulement affectée pour les conditions sollicitant un traitement local chez les personnes avec un TSA. Cependant, en présence de texture, la sensibilité est réduite pour le traitement visuel global et local. Ces résultats suggèrent que la perception de formes en autisme est reliée à l’efficacité à laquelle les éléments locaux (luminance versus texture) sont traités. Les connexions latérales et ascendantes / descendantes des aires visuelles primaires sont possiblement tributaires d’un déséquilibre entre les signaux excitateurs et inhibiteurs, influençant ainsi l’efficacité à laquelle l’information visuelle de luminance et de texture est traitée en autisme. Ces résultats supportent l’hypothèse selon laquelle les altérations de la perception visuelle de bas niveaux (local) sont à l’origine des atypies de plus hauts niveaux chez les personnes avec un TSA.

Characterization of patients undergoing noninvasive ventilation admitted in unit intermediate care

Non-invasive ventilation (NIV) is the application of a ventilatory support without resorting to invasive methods. Today it’s considered a credible therapeutic option, with enough scientiic evidence to support its application in various situations and clinical settings related to the treatment of acute respiratory disease, as well as chronic respiratory disease. Objectives: Characterize patients undergoing NIV admitted in Unit Intermediate Care (ICU) in the period from October 1st 2015 to June 30th 2016. Methods: Prospective study conducted in ICU between October 2015 and June 2016. In this study were included all patients hospitalized in this unit (ICU) and in that time period a sample of 57 participants was obtained. As data collection instruments we used a questionnaire for sociodemographic and clinical data and the Braden scale. Results: Participants were mostly male 38 (66.7%), the average age 69.5 ± 11.3 years, ranging between 43 and 92 years. They weighed on average 76.6 kg (52 and 150), with an average body mass index of 28.5 kg/m2 (20 to 58.5). With skin intact 28 (49.1%) with abnormal perfusion 12 (21.1%), with altered sensitivity 11 (19.3%) and a high risk of ulcer on the scale of Braden 37 (65%). The admission diagnosis was respiratory failure 33 (57.3%) and had different backgrounds. We used reused mask 53 (93.0%), the average time of NIV was 7.1 days (1-28), 4.8 days of hospitalization (1-18) and an average of 7.8 IPAP pressure. 11 (19.3%) of the participants developed face ulcer pressure.Conclusions: The NIV is used in patients with advanced age, obesity, respiratory failure and high risk of face ulcer development.

Nitrogen requirements at bulb initiation for production of intermediate-day onions

Nitrogen requirements at bulb initiation for production of intermediate-day onions Article in Acta horticulturae · October 2016 DOI: 10.17660/ActaHortic.2016.1142.11 1st Rui Machado 16.44 · Universidade de Évora 2nd David R. Bryla 30.16 · United States Department of Agriculture Abstract Nitrogen requirements at bulb initiation for production of intermediate-day onions Authors: R.M.A. Machado, D.R. Bryla Keywords: Allium cepa, crop growth, nitrogen uptake, soil nitrate Abstract: The effect of nitrogen application on growth, nitrogen (N) uptake, yield, and quality of intermediate-day onion (Allium cepa 'Guimar') was evaluated in the field in southern Portugal. Plants were fertilized with 30 kg ha-1 N at transplanting, 10 kg ha-1 N at 29 days after transplanting (DAT) during early leaf growth, and with 0, 20, 40 and 60 kg ha-1 N at 51 DAT at the initiation of bulbing. The root system of plants in each treatment were concentrated in the top 0.1 m of soil and limited to 0.3 m depth but neither root length density nor rooting depth were affected by N application during later stages of bulb development. Leaf and bulb dry matter, on the other hand, increased linearly with N rate during bulb growth (85 DAT) and at harvest (114 DAT), respectively. Soil nitrate-N (NO3-N) at 0-0.3 m depth likewise increased linearly with N rate during bulb growth but declined from 15-30 mg kg-1 at bulbing to >10 mg kg-1 in each treatment by harvest. A substantial amount of N in the plants, which ranged from 302-525 mg, was taken up from the soil. Application of 60 kg ha-1 N resulted in luxury consumption. Yield (fresh bulb weight) increased from 0.19 kg plant-1 with no N at bulbing to as much as 0.28 kg plant-1 with 60 kg ha-1 N. Bulbs harvested from plants fertilized 40-60 kg ha-1 N averaged 8.2-8.5 cm in diameter, while those from plants with no N at bulbing averaged only 7.2 cm in diameter. Application of N fertilizer is thus recommended at bulbing to increase N uptake, yield, and bulb size of intermediate-day onions, particularly in dry Mediterranean climates where many onions are produced. Other components of quality, including neck diameter, bulb water content, total soluble solids, and juice pH, were not affect by N applied at bulbing.

Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations

A new semi-implicit stress integration algorithm for finite strain plasticity (compatible with hyperelas- ticity) is introduced. Its most distinctive feature is the use of different parameterizations of equilibrium and reference configurations. Rotation terms (nonlinear trigonometric functions) are integrated explicitly and correspond to a change in the reference configuration. In contrast, relative Green–Lagrange strains (which are quadratic in terms of displacements) represent the equilibrium configuration implicitly. In addition, the adequacy of several objective stress rates in the semi-implicit context is studied. We para- metrize both reference and equilibrium configurations, in contrast with the so-called objective stress integration algorithms which use coinciding configurations. A single constitutive framework provides quantities needed by common discretization schemes. This is computationally convenient and robust, as all elements only need to provide pre-established quantities irrespectively of the constitutive model. In this work, mixed strain/stress control is used, as well as our smoothing algorithm for the complemen- tarity condition. Exceptional time-step robustness is achieved in elasto-plastic problems: often fewer than one-tenth of the typical number of time increments can be used with a quantifiable effect in accuracy. The proposed algorithm is general: all hyperelastic models and all classical elasto-plastic models can be employed. Plane-stress, Shell and 3D examples are used to illustrate the new algorithm. Both isotropic and anisotropic behavior is presented in elasto-plastic and hyperelastic examples.

Drought tolerance phenotyping in maize and sorghum: preliminary, intermediate and advanced evaluations.

2008

Tuning the valence of the cerium center in (Na)phthalocyaninato and porphyrinato cerium double-deckers by changing the nature of the tetrapyrrole ligands

A series of 7 cerium double-decker complexes with various tetrapyrrole ligands including porphyrinates, phthalocyaninates, and 2,3-naphthalocyaninates have been prepared by previously described methodologies and characterized with elemental analysis and a range of spectroscopic methods. The molecular structures of two heteroleptic \[(na)phthalocyaninato](porphyrinato) complexes have also been determined by X-ray diffraction analysis which exhibit a slightly distorted square antiprismatic geometry with two domed ligands. Having a range of tetrapyrrole ligands with very different electronic properties, these compounds have been systematically investigated for the effects of ligands on the valence of the cerium center. On the basis of the spectroscopic (UV−vis, near-IR, IR, and Raman), electrochemical, and structural data of these compounds and compared with those of the other rare earth(III) counterparts reported earlier, it has been found that the cerium center adopts an intermediate valence in these complexes. It assumes a virtually trivalent state in cerium bis(tetra-tert-butylnaphthalocyaninate) as a result of the two electron rich naphthalocyaninato ligands, which facilitate the delocalization of electron from the ligands to the metal center. For the rest of the cerium double-deckers, the cerium center is predominantly tetravalent. The valences (3.59−3.68) have been quantified according to their LIII-edge X-ray absorption near-edge structure (XANES) profiles.

Influence of host plant structure and microclimate on the abundance and behaviour of Tephritid fly

Microclimate and host plant architecture significantly influence the abundance and behavior of insects. However, most research in this field has focused at the invertebrate assemblage level, with few studies at the single-species level. Using wild Solanum mauritianum plants, we evaluated the influence of plant structure (number of leaves and branches and height of plant) and microclimate (temperature, relative humidity, and light intensity) on the abundance and behavior of a single insect species, the monophagous tephritid fly Bactrocera cacuminata (Hering). Abundance and oviposition behavior were signficantly influenced by the host structure (density of foliage) and associated microclimate. Resting behavior of both sexes was influenced positively by foliage density, while temperature positively influenced the numbers of resting females. The number of ovipositing females was positively influenced by temperature and negatively by relative humidity. Feeding behavior was rare on the host plant, as was mating. The relatively low explanatory power of the measured variables suggests that, in addition to host plant architecture and associated microclimate, other cues (e.g., olfactory or visual) could affect visitation and use of the larval host plant by adult fruit flies. For 12 plants observed at dusk (the time of fly mating), mating pairs were observed on only one tree. Principal component analyses of the plant and microclimate factors associated with these plants revealed that the plant on which mating was observed had specific characteristics (intermediate light intensity, greater height, and greater quantity of fruit) that may have influenced its selection as a mating site.

Raman spectroscopic characteristics of phthalocyanine and naphthalocyanine in sandwich-type phthalocyaninato and porphyrinato rare earth complexes Part 5. – Raman spectroscopic characteristics of naphthalocyanine in mixed [tetrakis(4-tert-butylphenyl)porphyrinato]-(naphthalocyaninato) rare earth double-deckers

Raman spectra were recorded in the range 400–1800 cm−1 for a series of 15 mixed \[tetrakis(4-tert-butylphenyl)porphyrinato](2,3-naphthalocyaninato) rare earth double-deckers M(TBPP)(Nc) (M = Y; La–Lu except Pm) using laser excitation at 632.8 and 785 nm. Comparisons with bis(naphthalocyaninato) rare earth counterparts reveal that the vibrations of the metallonaphthalocyanine M(Nc) fragment dominate the Raman features of M(TBPP)(Nc). When excited with radiation of 632.8 nm, the most intense vibration appears at about 1595 cm−1, due to the naphthalene stretching. These complexes exhibit the marker Raman band for Nc•− as a medium-intense band in the range 1496–1507 cm−1, attributed to the coupling of pyrrole and aza stretching, while the marker Raman band of Nc2− in intermediate-valence Ce(TBPP)(Nc) appears as a strong band at 1493 cm−1 and is due to the isoindole stretchings. By contrast, when excited with radiation of 785 nm that is in close resonance with the main Q absorption band of the naphthalocyanine ligand, the ring radial vibrations at ca 680 and 735 cm−1 for MIII(TBPP)(Nc) are selectively intensified and are the most intense bands. For the cerium double-decker, the most intense vibration also acting as the marker Raman band of Nc2− appears at 1497 cm−1 with contributions from both pyrrole CC and aza CN stretches. The same vibrational modes show weak to medium intensity scattering at 1506–1509 cm−1 for MIII(TBPP)(Nc) and this is the marker Raman band of Nc•− when thus excited. The scatterings due to the Nc breathings, ring radial vibration, aza group stretchings, naphthalene stretchings, benzoisoindole stretchings and the coupling of pyrrole CC and aza CN stretchings in MIII(TBPP)(Nc) are all slightly blue shifted along with the decrease in rare earth ionic radius, confirming the effects of increased ring–ring interactions on the Raman characteristics of naphthalocyanine in the mixed ring double-deckers.

The importance of gestation process dynamics

Principal Topic In this paper we seek to highlight the important intermediate role that the gestation process plays in entrepreneurship by examining its key antecedents and its consequences for new venture emergence. In doing so we take a behavioural perspective and argue that it is not only what a nascent venture is, but what it does (Katz & Gartner, 1988; Shane & Delmar, 2004; Reynolds, 2007) and when it does it during start-up (Reynolds & Miller, 1992; Lichtenstein, Carter, Dooley & Gartner, 2007) that is important. To extend an analogy from biological development, what we suggest is that the way a new venture is nurtured is just as fundamental as its nature. Much prior research has focused on the nature of new ventures and attempted to attribute variations in outcomes directly to the impact resource endowments and investments have. While there is little doubt that venture resource attributes such as human capital, and specifically prior entrepreneurial experience (Alsos & Kolvereid, 1998), access to social (Davidsson & Honig, 2003) and financial capital have an influence. Resource attributes themselves are distal from successful start-up endeavours and remain inanimate if not for the actions of the nascent venture. The key contribution we make is to shift focus from whether or not actions are taken, but when these actions happen and how that is situated in the overall gestation process. Thus, we suggest that it is gestation process dynamics, or when gestation actions occur, that is more proximal to venture outcomes and we focus on this. Recently scholars have highlighted the complexity that exists in the start-up or gestation process, be it temporal or contextual (Liao, Welsch & Tan, 2005; Lichtenstein et al. 2007). There is great variation in how long a start-up process might take (Reynolds & Miller, 1992), some processes require less action than others (Carter, Gartner & Reynolds, 1996), and the overall intensity of the start-up effort is also deemed important (Reynolds, 2007). And, despite some evidence that particular activities are more influential than others (Delmar & Shane, 2003), the order in which events may happen is, until now, largely indeterminate as regard its influence on success (Liao & Welsch, 2008). We suggest that it is this complexity of the intervening gestation process that attenuates the effect of resource endowment and has resulted in mixed findings in previous research. Thus, in order to reduce complexity we shall take a holistic view of the gestation process and argue that it is its’ dynamic properties that determine nascent venture attempt outcomes. Importantly, we acknowledge that particular gestation processes of themselves would not guarantee successful start-up, but it is more correctly the fit between the process dynamics and the ventures attributes (Davidsson, 2005) that is influential. So we aim to examine process dynamics by comparing sub-groups of venture types by resource attributes. Thus, as an initial step toward unpacking the complexity of the gestation process, this paper aims to establish the importance of its role as an intermediary between attributes of the nascent venture and the emergence of that venture. Here, we make a contribution by empirically examining gestation process dynamics and their fit with venture attributes. We do this by firstly, examining that nature of the influence that venture attributes such as human and social capital have on the dynamics of the gestation process, and secondly by investigating the effect that gestation process dynamics have on venture creation outcomes. Methodology and Propositions In order to explore the importance that gestation processes dynamics have in nascent entrepreneurship we conduct an empirical study of ventures start-ups. Data is drawn from a screened random sample of 625 Australian nascent business ventures prior to them achieving consistent outcomes in the market. This data was collected during 2007/8 and 2008/9 as part of the Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE) project (Davidsson et al., 2008). CAUSEE is a longitudinal panel study conducted over four years, sourcing information from annually administered telephone surveys. Importantly for our study, this methodology allows for the capture and tracking of active nascent venture creation as it happens, thus reducing hindsight and selection biases. In addition, improved tests of causality may be made given that outcome measures are temporally removed from preceding events. The data analysed in this paper represents the first two of these four years, and for the first time has access to follow-up outcome measures for these venture attempts: where 260 were successful, 126 were abandoned, and 191 are still in progress. With regards to venture attributes as gestation process antecedents, we examine specific human capital measured as successful prior experience in entrepreneurship, and direct social capital of the venture as ‘team start-ups’. In assessing gestation process dynamics we follow Lichtenstein et al. (2007) to suggest that the rate, concentration and timing of gestation activities may be used to summarise the complexity dynamics of that process. In addition, we extend this set of measures to include the interaction of discovery and exploitation by way of changes made to the venture idea. Those ventures with successful prior experience or those who conduct symbiotic parallel start-up attempts may be able to, or be forced to, leave their gestation action until later and still derive a successful outcome. In addition access to direct social capital may provide the support upon which the venture may draw in order to persevere in the face of adversity, turning a seemingly futile start-up attempt into a success. On the other hand prior experience may engender the foresight to terminate a venture attempt early should it be seen to be going nowhere. The temporal nature of these conjectures highlight the importance that process dynamics play and will be examined in this research Statistical models are developed to examine gestation process dynamics. We use multivariate general linear modelling to analyse how human and social capital factors influence gestation process dynamics. In turn, we use event history models and stratified Cox regression to assess the influence that gestation process dynamics have on venture outcomes. Results and Implications What entrepreneurs do is of interest to both scholars and practitioners’ alike. Thus the results of this research are important since they focus on nascent behaviour and its outcomes. While venture attributes themselves may be influential this is of little actionable assistance to practitioners. For example it is unhelpful to say to the prospective first time entrepreneur “you’ll be more successful if you have lots of prior experience in firm start-ups”. This research attempts to close this relevance gap by addressing what gestation behaviours might be appropriate, when actions best be focused, and most importantly in what circumstances. Further, we make a contribution to the entrepreneurship literature, examining the role that gestation process dynamics play in outcomes, by specifically attributing these to the nature of the venture itself. This extension is to the best of our knowledge new to the research field.

Improvements to the design of Litesteel Beams undergoing lateral distortional buckling

An Australian manufacturer has recently developed an innovative group of cold-formed steel hollow flange sections, one of them is LiteSteel Beams (LSBs). The LSB sections are produced from thin and high strength steels by a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. They have a unique geometry consisting of rectangular hollow flanges and a relatively slender web. The LSB flexural members are subjected to lateral distortional buckling effects and hence their capacities are reduced for intermediate spans. The current design rules for lateral distortional buckling were developed based on the lower bound of numerical and experimental results. The effect of LSB section geometry was not considered although it could influence the lateral distortional buckling performance. Therefore an accurate finite element model of LSB flexural members was developed and validated using experimental and finite strip analysis results. It was then used to investigate the effect of LSB geometry. The extensive moment capacity data thus developed was used to develop improved design rules for LSBs with one of them considering the LSB geometry effects through a modified slenderness parameter. The use of the new design rules gave higher lateral distortional buckling capacities for LSB sections with intermediate slenderness. The new design rule is also able to accurately predict the lateral distortional buckling moment capacities of other hollow flange beams (HFBs).