Tidal and sea level changes at Jeddah, Red Sea

Tidal and sea level changes during 1991 at a coastal station (Jeddah) in the central part of the Red Sea are investigated. Analysis shows higher sea levels in winter and lower in summer. The amplitude of change at Jeddah is above 50cm. Analysis of wind stress at Jeddah indicates an insignificant contribution of the cross-shore component, while a major part of the changes in the sea level can be accounted for by the long-shore component.

Lunar, diurnal and tidal periodicity in relation to the prawn abundance and migration in the Godavari estuarine systems

Preliminary investigations to study the lunar, diurnal and tidal periodicity in abundance and migrations of prawns were made in the Bairavapalam distributary of the Goutami branch of the Godavari estuary during the period of November 1961 to July 1962. The study was based on observation of the catches of a stake net (bag net) operated near the mouth of the estuary. Records of the catches were maintained tidewise daily. Comparative estimates of abundance were made on the basis of catch per hour's operation. It was generally observed that the catches were higher during the darker half of the month than in the brighter fortnight. The landings during low tides were generally higher than those during high tides and usually heavier catches were made during nocturnal low tides than during the day low tides. A continuous inward and outward (immigration and emigration) movement of prawns of all size groups was observed in the estuary from November to July. In general, more penaeid prawns were found to be immigrating at dawn than at dusk. Similarly, the number of emigrants was also found to be generally higher during the new moon period than during the full moon. Metapenaeus monoceros showed an almost distinct nocturnal periodicity in migration, while no such periodicity was observed, distinctly, in other species. In the case of Penaeus indicus the movement of migrants was prolonged. In M. brevicornis the migrants were scarce till March and thereafter increased numerically. The migrant forms of Metapenaeus dobsoni continued to be abundant till May with peak periods in January and February. The migratory pattern of Metapenaeus affinis was similar to that of Metapenaeus brevicornis, though the migrants of the former species appeared a month earlier than the latter. Intensive studies over extended areas for longer periods are required to understand clearly the migratory pattern of the various species. The phenomenon of immigration of prawns can be clearly understood only by vital staining or tagging studies. Perhaps the emigrants might be returning with the succeeding changing life. To verify this, laboratory experiments, by vital stains, were conducted. The marked specimens, if released during the low tides on a large scale, may be recaptured during the subsequent high tides and the duration also may be calculated. At least some percentage of the emigrants remains in the sea for maturity and breeding.

Preliminary observations on the effect of a. c. current on Catla catla and Ophicephalus punctatus

In order to evolve suitable electrical fishing gear for inland waters, preliminary experiments have been conducted to observe effect of a. c. currents on Catla catla at voltages of 30, 90 and 120, pH 7.3 and 8.4, temperature 48°F, 78°F and 105°F, distance between electrodes 25 cm, 50 cm and 75 cm, size range of fish 100 mm, to 235 mm. Apparatus used was a 5 kw; a. c. 60 cycles generator with resistance control. Larger sizes of fish were more prone to electric shock. Higher temperature increases the intensity of the shock, while variation of pH between 7.3 to 8.4 did not materially affect the intensity of the shock. Fishing with a mixed population of Catla catla and Ophicephalus punctatus gave a greater percentage of mortality for the latter.

Stray current corrosion of copper sheathing and keel cooling pipe of a 36' trawler

The results of investigations into the cause of an accelerated corrosion of copper sheathing and keel cooling pipe of a 36' wooden trawler are reported. The corrosion is attributed to the stray electric currents originating from the electrical wiring system. The sources of stray currents and the remedial measures have been suggested.

KNOCK DETECTION BY AUDIBLE, ACCELEROMETER, PRESSURE AND IONIC CURRENT METHODS.

This paper describes the ways which are used at the present time by the Ford Motor Company for the detection of knock. A description of the available methods is given, and their relative effectiveness is assessed by analysing data taken simultaneously by all of these methods. It is shown that no one technique has an overwhelming advantage, but that each technique has its individual merits and demerits.

Investigation of the losses in the stator duct spacers of large A.C. motors using the A -ip 3-D eddy current formulation

This paper describes how the A -if) formulation may be applied to determine the losses in the stator duct spacers of large a.c. motors. The model is described in terms of its geometry and boundary conditions. The novel aspects of the application of the formulation to this problem are explained. These include the modelling of fixed currents sources (the stator windings), the location of the necessary cut surfaces and the determination of their magnetic scalar potential differences, and the implementation of periodic boundary conditions for vector variables. Results are presented showing how the duct spacer losses vary with load, and with the relative permeability of the spacer material. The effects of modelling iron nonlinearity, of both the spacer and the steel laminations, are also illustrated. © 1996 IEEE.

Distribution of critical current density in large YBa2Cu3O7-δ grains fabricated using seeded peritectic solidification

High quality large grain high Tc superconducting ceramics offer enormous potential as 'permanent' magnets and in magnetic screening applications at 77K. This requires sample dimensions -cm with uniform high critical current densities of the order 105 A/cm2 in applied magnetic fields of IT. We report a study of the magnetic characterisation of a typical large YBa2Cu3O7-δ grain, prepared by seeded peritectic solidification, and correlate the magnetically determined critical current density, Jc, with microstuctural features from different regions of the bulk sample. From this data we extract the temperature, field and positional dependence of the critical current density of the samples and the irreversibility line. We find that whilst the bulk sample exhibits a good Jc of order 104 A/cm2 (77K, 1T), the local Jc is strongly correlated with the sample microstructure towards the edge of the sample and more severely at the centre of the sample by the presence of SmBa2Cu3O7-δ seed crystal. © 1997 IEEE.