各向同性与各向异性介质中地震波旅行时正演模拟与反演成像

By seismic tomography, interesting results have been achieved not only in the research of the geosphere with a large scale but also in the exploration of resources and projects with a small scale since 80'. Compared with traditional inversion methods, seismic tomography can offer more and detailed information about subsurface and has been being paid attention by more and more geophysicists. Since inversion based on forward modeling, we have studied and improved the methods to calculate seismic traveltimes and raypaths in isotropic and anisotropic media, and applied the improved forward methods to traveltime tomography. There are three main kinds of methods to calculate seismic traveltime field and its ray path distribution, which are ray-tracing theory, eikonal equation by the finite-difference and minimum traveltime tree algorithm. In ray tracing, five methods are introduced in the paper, including analytic ray tracing, ray shooting, ray bending, grid ray tracing and rectangle grid ray perturbation with three points. Finite-difference solution of eikonal equation is very efficient in calculation of seismic first-break, but is awkward in calculation of reflection traveltimes. We have put forward a idea to calculate traveltimes of reflected waves using a combining way of eikonal equation method and other one in order to improve its capability of dealing with reflection waves. The minimum traveltime tree algorithm has been studied with emphases. Three improved algorithms are put forward on the basis of basic algorithm of the minimum traveltime tree. The first improved algorithm is called raypath tracing backward minimum traveltime algorithm, in which not only wavelets from the current source but also wavelets from upper source points are all calculated. The algorithm can obviously improve the speed of calculating traveltimes and raypaths in layered or blocked homogeneous media and keep good accuracy. The second improved algorithm is raypath key point minimum traveltime algorithm in which traveltimes and raypaths are calculated with a view of key points of raypaths (key points of raypths mean the pivotal points which determine raypaths). The raypath key point method is developed on the basis of the first improved algorithm, and has better applicability. For example, it is very efficient even for inhomogeneous media. Another improved algorithm, double grid minimum traveltime tree algorithm, bases upon raypath key point scheme, in which a model is divided with two kinds of grids so that the unnecessary calculation can be left out. Violent undulation of curved interface often results in the phenomenon that there are no reflection points on some parts of interfaces where there should be. One efficacious scheme that curved interfaces are divided into segments, and these segments are treated respectively is presented to solve the problem. In addition, the approximation to interfaces with discrete grids leads to large errors in calculation of traveltimes and raypaths. Noting the point, we have thought a new method to remove the negative effect of mesh and to improve calculation accuracy by correcting the traveltimes with a little of additional calculation, and obtained better results.

接收函数方法与中国及邻区上地幔间断面的研究

The receiver function method applied in researching the discontinuities in upper mantle was systematically studied in this paper. Using the theoretical receiver functions, the characteristics of P410S and P660S phases were analyzed, and the influencing factors for detection of these phases were discussed. The stability of receiver function was studied, and a new computational method of receiver function, RFSSMS (Receiver Function of Stack and Smooth of Multi seismic-records at a Single station), was put forward. We built initial reference velocity model for the media beneath each of 18 seismic stations respectively; then estimated the buried depths of 410-km and 660-km discontinuities(simply marked as '410' and '660') under the stations by using the arrive time differences of P410S and P660S with P. We developed a new receiver function inversion method -PGARFI (Peeling-Genetic Algorithm of Receiver Function Inversion), to obtain the whole crust and upper mantle velocity structure and the depths of discontinuities beneath a station. The major works and results could be summarized as follows: (1) By analysis of the theoretical receiver functions with different velocity models and different ray parameters, we obtain the knowledge: The amplitudes of P410S and P660S phases are decreasing with the increasing of epicentral distance A , and the arrival time differences of these phases with P are shorter as A is longer. The multiple refracted and/or reflected waves yielded on Moho and the discontinuities in the crust interfere the identification of P410S. If existing LVZ under the lithosphere, some multiple waves caused by LVZ will interfere the identification of P410S. The multiple waves produced by discontinuity lied near 120km depth will mix with P410s phase in some range of epicentral distance; and the multiple waves concerned with the discontinuity lied near 210km depth will interfere the identification of P660S. The epicentral distance for P4i0s identification is limited, the upper limit is 80° . The identification of P660S is not restricted by the epicenter distance obviously. The identification of P410S and P6gos in the theoretical receiver functions is interfered weakly from the seismic wave attenuation caused by the media absorption if the Q value in a reasonable range. (2) The stability of receiver function was studied by using synthetic seismograms with different kind of noise. The results show that on the condition of high signal-noise-ratio of seismic records, the high frequency background noise and the low frequency microseism noise do not influence the calculating result of receiver function. But the media "scattering noise" influence the stability of receiver function. When the scattering effect reach some level, the identification of P4iOs and P66os is difficult in single receiver function which is yielded from only one seismic record. We provided a new method to calculate receiver function, that is, with a group of earthquake records, stacking the R and Z components respectively in the frequency domain, and weighted smooth the stacked Z component, then compute the complex spectrum ratio of R to Z. This method can improve the stability of receiver function and protrude the P4i0s and P66os in the receiver function curves. (3) 263 receiver functions were provided from 1364 three component broadband seismograms recorded at 18 stations in China and adjacent areas for the tele-earthquakes. The observed arrival time differences of P410S and P660S with P were obtained in these receiver functions. The initial velocity model for every station was built according to the prior research results. The buried depths of '410' and '660' under a station were acquired by the way of adjusting the depths of these two discontinuities in the initial velocity model until the theoretical arrival time differences of P410S and P660S with P well conformed to the observed. The results show an obvious lateral heterogeneity of buried depths of ' 410' and (660' . The depth of '410' is shallower beneath BJI, XAN, LZH and ENH, but deeper under QIZ and CHTO, and the average is 403km . The average depth of '660' is 663km, deeper under MDJ and MAJO, but shallower under QIZ and HYB. (4) For inversing the whole crust and upper mantle velocity structure, a new inversion method -PGARFI (Peeling-Genetic Algorithm of Receiver Function Inversion) has- been developed here. The media beneath a station is divided into segments, then the velocity structure is inversed from receiver function from surface to deep successively. Using PGARFI, the multi reflection / refraction phases of shallower discontinuities are isolated from the first order refraction transform phase of deep discontinuity. The genetic algorithm with floating-point coding was used hi the inversion of every segment, and arithmetical crossover and non-uniform mutation technologies were employed in the genetic optimization. 10 independent inversions are completed for every segment, and 50 most excellent velocity models are selected according to the priority of fitness from all models produced in the inversion process. The final velocity structure of every segment is obtained from the weighted average of these 50 models. Before inversion, a wide range of velocity variation with depth and depth range of the main discontinuities are given according to priori knowledge. PGARFI was verified with numerical test and applied in the inversion of the velocity structure beneath HIA station down to 700km depth.

中新世秦安黄土一古土壤序列记录的古气候变化周期

Analysis of periodic oscillations of climate is very important in understanding the behavior of the climate system. Milankovitch hypothesis, which holds that the glacial-interglacial climatic cycles during the Quaternary were primarily driven by variations in orbital parameters, has been supported by substantial geological evidence. Continuous long-term and high-resolution records are crucial to detect how variations of Earth's orbital parameters affected climate before the Quaternary when the boundary conditions were significantly different. Qinan loess formed in the Miocene is nearly continuous aeolian deposit in northern China. Previous study has established a constrained chronology, which provides a basis to examine long-term climatic variations. One of important issues to untangle the mechanisms behind major climate changes is the investigation of climate cycles recorded in Qinan loess. In this paper, two climatic proxies, magnetic susceptibility and redness, are analyzed for QA-I section to evaluate climate cycles using Maximum entropy spectral analysis and Blackman-Tuckey method. Main conclusions are presented as following: Results exhibit significant peaks at periods of 100 ka, 64 ka, 41 ka, 30 ka and 23 ka, but also 1000 ka, 600 ka and 400 ka. These peaks correspond to the dominant periods of the Earth's orbit parameters, which indicates that the formation of the aeolian sediment in northern China might be primarily driven by variations in orbital parameters. Fluctuations with different cycles respectively dominated in different periods. Major shifts in the dominant cycles occurred at 20.3, 19.0, 17.9, 15.2, 12.5 and 11.3 Myr ago. The transition that happened at 17.9 Myr ago was synchronous with the uplift of the Tibetan Plateau, while others at 15.2, 12.5 and 11.3 Myr ago were in good agreement with the timing of the development of Antarctic ice sheet. Therefore we inferred that these shifts might be related to changes in global ice volume and/or the Tibetan uplift. 3. The strong period of 100 ka is observed between 17.9 and 15.2, and 12.5 and 11.3 Myr ago. Ice sheet-climate models that have been used to explain the cause of the 100 ka period since the middle Pleistocene couldn't be responsible for driving the 100 ka climate cycle in the Miocene in Northern China because of the different boundary of climatic conditions between the Quaternary and Miocene. Further investigation is needed to understand how this cycle became dominant in Qinan loess records during these two time segments.

苏丹被动裂谷盆地的油气成藏机理和成藏模式

The research area of this paper covers the maximum exploration projects of CNPC, including Blocks 1/2/4 and Block 6 of the Muglad basin and the Melut basin in Bocks 3/7 in Sudan. Based on the study of the evolution history of the Central African Shear Zone (CASZ), structural styles and filling characteristics of the rift basins, it is put forward that the rift basins in Sudan are typical passive rift basins undergoing the strike-slip, extension, compression and inversion since the Cretaceous. The three-stage rift basins overlapped obliquely. The extension and rifting during the Early Cretaceous is 50-70% of the total extension. The features of the passive rift basins decided that there is a single sedimentary cycle and one set of active source rocks within the middle. Influenced by the three-stage rifting and low thermal gradient, hydrocarbon generation and charging took place very late, and the oil pool formation mechanism is very unique from the Lower Cretaceous rift sequences to the Paleogene. The reservoir-seal assemblages are very complicated in time and space. The sealing capacity of cap rocks was controlled by the CASZ. In general the oils become heavier towards the CASZ and lighter far away. The oil biodegradation is the reason causing the high total acid number. The determination of effective reservoir depth ensures that all discovered fields up to now are high-production fields. The propagation and growth of boundary faults in the rift basins can be divided into a simple fault propagation pattern and a fault growth-linkage pattern. It is firstly found that the linkage of boundary fault segments controls the formation of petroleum systems. Three methods have been established to outline petroleum systems. And a new classification scheme of rift-type petroleum system has been put forward: pre-rift, syn-rift (including passive and active) and post-rift petroleum systems. This scheme will be very important for the further exploration of rift basins. This paper firstly established the formation models of oil pools for the passive rift basins in Sudan: the coupling of accommodation zones and main plays for the formation of giant fields. The overlapping of late rifting broke the anticlines to be several fault-blocks. This process determined that anti-fault blocks are the main traptypes in the cretaceous sequences and anticlines in the Paleogene. This can explain why the traptypes are different between the Muglad and Mefut basins, and will provide theoretic guidance for the exploration strategy. The established formation mechanism and models in this paper have had great potential guidance and promotion for the exploration in Sudan, and resulted in significant economic and social benefit. A giant field of 500 million tons oil in place was found 2003. The cost in Blocks 3/7 is only 0.25

单（多）井抽灌对浅部地温场的影响研究

The technique of energy extraction using groundwater source heat pumps, as a sustainable way of low-grade thermal energy utilization, has widely been used since mid-1990's. Based on the basic theories of groundwater flow and heat transfer and by employing two analytic models, the relationship of the thermal breakthrough time for a production well with the effect factors involved is analyzed and the impact of heat transfer by means of conduction and convection, under different groundwater velocity conditions, on geo-temperature field is discussed.A mathematical model, coupling the equations for groundwater flow with those for heat transfer, was developed. The impact of energy mining using a single well system of supplying and returning water on geo-temperature field under different hydrogeological conditions, well structures, withdraw-and-reinjection rates, and natural groundwater flow velocities was quantitatively simulated using the finite difference simulator HST3D. Theoretical analyses of the simulated results were also made. The simulated results of the single well system indicate that neither the permeability nor the porosity of a homogeneous aquifer has significant effect on the temperature of the production segment provided that the production and injection capability of each well in the aquifers involved can meet the designed value. If there exists a lower permeable interlayer, compared with the main aquifer, between the production and injection segments, the temperature changes of the production segment will decrease. The thicker the interlayer and the lower the interlayer permeability, the longer the thermal breakthrough time of the production segment and the smaller the temperature changes of the production segment. According to the above modeling, it can also be found that with the increase of the aquifer thickness, the distance between the production and injection screens, and/or the regional groundwater flow velocity, and/or the decrease of the production-and-reinjection rate, the temperature changes of the production segment decline. For an aquifer of a constant thickness, continuously increase the screen lengths of production and injection segments may lead to the decrease of the distance between the production and injection screens, and the temperature changes of the production segment will increase, consequently.According to the simulation results of the single well system, the parameters, that can cause significant influence on heat transfer as well as geo-temperature field, were chosen for doublet system simulation. It is indicated that the temperature changes of the pumping well will decrease as the aquifer thickness, the distance between the well pair and/or the screen lengths of the doublet increase. In the case of a low permeable interlayer embedding in the main aquifer, if the screens of the pumping and the injection wells are installed respectively below and above the interlayer, the temperature changes of the pumping well will be smaller than that without the interlay. The lower the permeability of the interlayer, the smaller the temperature changes. The simulation results also indicate that the lower the pumping-and-reinjection rate, the greater the temperature changes of the pumping well. It can also be found that if the producer and the injector are chosen reasonably, the temperature changes of the pumping well will decline as the regional groundwater flow velocity increases. Compared with the case that the groundwater flow direction is perpendicular to the well pair, if the regional flow is directed from the pumping well to the injection well, the temperature changes of the pumping well is relatively smaller.Based on the above simulation study, a case history was conducted using the data from an operating system in Beijing. By means of the conceptual model and the mathematical model, a 3-D simulation model was developed and the hydrogeological parameters and the thermal properties were calibrated. The calibrated model was used to predict the evolution of the geo-temperature field for the next five years. The simulation results indicate that the calibrated model can represent the hydrogeological conditions and the nature of the aquifers. It can also be found that the temperature fronts in high permeable aquifers move very fast and the radiuses of temperature influence are large. Comparatively, the temperature changes in clay layers are smaller and there is an obvious lag of the temperature changes. According to the current energy mining load, the temperature of the pumping wells will increase by 0.7°C at the end of the next five years. The above case study may provide reliable base for the scientific management of the operating system studied.

Total analytical method for Radix astragali extract using two-binary multi-segment gradient elution liquid chromatography

There is an urgent need for thorough analysis of Radix astragali, a widely used Chinese herb, for quality control purposes. This paper describes the development of a total analytical method for Radix astragali extract, a multi-component complex mixture. Twenty-four components were separated step by step from the extract using a series of isocratic isopropanol-methanol elutions, and then 42 components were separated similarly using methanol-water elutions. Based on the log k(w) and -S of the 66 components obtained from the above procedure and the optimization software developed in our laboratory, an optimum elution program consisting of seven methanol-water segments and four isopropanol-methanol segments was developed to finish the task of analyzing the total components in a single run. Under optimized gradient conditions, the sample of Radix astragali extract was analyzed. As expected, most of the components were well separated and the experimental chromatogram was in a good agreement with the predicted one.

公共政策制定程序对政策可接受性的影响

This research addresses the problems of public policy-making procedures. In conducting our research, we considered public policy as the allocation or reallocation of interests or resources among different members of the public. Due to limited resources, administrations should trade off all interests among different segments of society when formulating a policy. Unfortunately, in recent years there have been several mass conflicts with administration of public policy. This infers that some people’s interests were ignored or harmed by certain policies. According to the theory of procedural justice, people may accept the unexpected result if they consider the procedure is just. This research hypothesizes that there are certain problems in current policy-making procedures and that improving these procedures may make policies more acceptable. A pilot study was conducted by interviewing ten scholars from a range of disciplines. The interview record transcripts were coded by three analysts. The results indicate that: 1) Most of the scholars criticized current public policies as lacking sensitivity to public issues; 2) Most of them considered that current public policies do not resolve problems effectively; and 3) They all considered that psychology research may enhance awareness of public issues and improve the effectiveness of policy. In study 2, the procedure of public policy was tracked and compared with a social survey. The Beijing government would like to increase the taxi fare rate to cope with the rising price of petroleum. Although the majority of delegates in a hearing of witnesses supported the policy consideration, the social survey of 186 residents and 63 taxi drivers indicated that both of them oppose the consideration. The findings indicate that the hearing of witnesses was not able to delegate the opinions of the public, resulting in the policy failing to resolve the problem. Study 3 was a nonequivalent control group quasi-experiment. Visitors of two Internet Website were chosen as subjects for original photo games. For the experiment group, visitors were invited to express their desires and suggestions on the game rules for one week, and then declare rules referencing the suggestions before starting the game. Meanwhile, the control group simply declared the rules at the beginning of the game. Compared with the two games during 23 days, the experiment group submitted more photos than the control group. The results of this research imply that, the good will of policy makers is not enough to make a policy effective. Surveys on public attitudes at the beginning of the policy-making process can allow policy makers to better determine public issues, assess the tradeoff of public interests, help ensure policies are more acceptable, and help foster a harmonious society. The authors of this research suggest that psychology research should take more social level problems into account in the policy-making process.

语音意识缺陷儿童的言语知觉技能

Considerable studies find that developmental dyslexia is associated with deficits in phonological processing skills, especially phonological awareness. In order to explore the nature of phonological awareness deficits in dyslexia, researchers have begun to investigate the role of speech perception. The findings about speech perception abilities in dyslexics are inconsistent. The heterogeneity of dyslexia may be responsible for the inconsistency of findings. Considering the general suggestion that phonological awareness deficits in dyslexia are attributed to categorical perception deficits, it is more direct to examine whether children with phonological awareness difficulties or phonological dyslexia show speech categorization deficits consistently. The present study would investigate whether Chinese children with phonological awareness deficits or phonological dyslexia showed abnormal speech perception. The whole study consisted of two parts. Part I screened children with phonological-awareness deficits from Year 3 kindergartens and examined their abilities of perceiving native category continuum, nonnative category contrasts and non-speech sound series. Part II selected phonological dyslexics from an elementary school as participants, and further explored the relation between phonological deficits and speech perception. The first two experiments of Part II examined separately the abilities to label stimuli in native category continuum and brief stops in different contexts, the last experiment investigated the adaptation effects of different participant groups. The main conclusions are as follows: 1) Children with phonological dyslexia showed categorical perception deficits: they had lower consistency than controls when perceiving stimuli within phonetic categories, especially for the stimuli which were not natural sounds. 2) Children with phonological dyslexia exhibited a general difficulty of perceiving brief segments of stops from different contexts. 3) Children with phonological dyslexia did not show adaptation to repeatedly presented stimuli. Based on the present conclusions and the findings of previous studies, we suggested that the representations of sound stimuli in phonological dyslexics’ brains are different from those in normal children’s; the representations of sound stimuli in dyslexics’ cortical neural networks are more diffuse and inconsistent.

Direct Computation of 3D Shape Invariants and the Focus of Expansion

Structure from motion often refers to the computation of 3D structure from a matched sequence of images. However, a depth map of a surface is difficult to compute and may not be a good representation for storage and recognition. Given matched images, I will first show that the sign of the normal curvature in a given direction at a given point in the image can be computed from a simple difference of slopes of line-segments in one image. Using this result, local surface patches can be classified as convex, concave, parabolic (cylindrical), hyperbolic (saddle point) or planar. At the same time the translational component of the optical flow is obtained, from which the focus of expansion can be computed.

SketchIT: A Sketch Interpretation Tool for Conceptual Mechanical Design

We describe a program called SketchIT capable of producing multiple families of designs from a single sketch. The program is given a rough sketch (drawn using line segments for part faces and icons for springs and kinematic joints) and a description of the desired behavior. The sketch is "rough" in the sense that taken literally, it may not work. From this single, perhaps flawed sketch and the behavior description, the program produces an entire family of working designs. The program also produces design variants, each of which is itself a family of designs. SketchIT represents each family of designs with a "behavior ensuring parametric model" (BEP-Model), a parametric model augmented with a set of constraints that ensure the geometry provides the desired behavior. The construction of the BEP-Model from the sketch and behavior description is the primary task and source of difficulty in this undertaking. SketchIT begins by abstracting the sketch to produce a qualitative configuration space (qc-space) which it then uses as its primary representation of behavior. SketchIT modifies this initial qc-space until qualitative simulation verifies that it produces the desired behavior. SketchIT's task is then to find geometries that implement this qc-space. It does this using a library of qc-space fragments. Each fragment is a piece of parametric geometry with a set of constraints that ensure the geometry implements a specific kind of boundary (qcs-curve) in qc-space. SketchIT assembles the fragments to produce the BEP-Model. SketchIT produces design variants by mapping the qc-space to multiple implementations, and by transforming rotating parts to translating parts and vice versa.

Robust and Efficient 3D Recognition by Alignment

Alignment is a prevalent approach for recognizing 3D objects in 2D images. A major problem with current implementations is how to robustly handle errors that propagate from uncertainties in the locations of image features. This thesis gives a technique for bounding these errors. The technique makes use of a new solution to the problem of recovering 3D pose from three matching point pairs under weak-perspective projection. Furthermore, the error bounds are used to demonstrate that using line segments for features instead of points significantly reduces the false positive rate, to the extent that alignment can remain reliable even in cluttered scenes.

Anthropometry of the Breast Region: How to Measure?

Breast region measurements are important for research, but they may also become significant in the legal field as a quantitative tool for preoperative and postoperative evaluation. Direct anthropometric measurements can be taken in clinical practice. the aim of this study was to compare direct breast anthropometric measurements taken with a tape measure and a compass.Forty women, aged 18-60 years, were evaluated. They had 14 anatomical landmarks marked on the breast region and arms. the union of these points formed eight linear segments and one angle for each side of the body. the volunteers were evaluated by direct anthropometry in a standardized way, using a tape measure and a compass.Differences were found between the tape measure and the compass measurements for all segments analyzed (p > 0.05).Measurements obtained by tape measure and compass are not identical. Therefore, once the measurement tool is chosen, it should be used for the pre- and postoperative measurements in a standardized way.This journal requires that authors assign a level of evidence to each article. for a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Il Sistema di Revenue Management strumento per lo sviluppo turistico sostenibile delle destinazioni

Businesses interact constantly with the environment, realizing several and heterogeneous exchanges. Organizations can be considered a system of different interests, frequently conflicting and the satisfaction of different stakeholders is a condition of success and survival. National and international literature attempts to explain the complex connection between companies and environment. In particular, the Stakeholder Theory considers crucial for businesses the identification of different stakeholders and their involvement in decision-making process. In this context, profit can not be considered the only purpose of companies existence and business aims become more numerous and different. The Stakeholder Theory is often utilized as framework for tourism studies, in particular in Sustainable Tourism Development research. In fact, authors consider sustainable the tourism development able to satisfy interests of different stakeholders, traditionally identified as local community and government, businesses, tourists and natural environment. Tourism businesses have to guarantee the optimal use of natural resources, the respect of socio-cultural tradition of local community and the creation of socio-economic benefits for all stakeholders in destinations. An obstacle to sustainable tourism development that characterizes a number of destinations worldwide is tourism demand seasonality. In fact, its negative impact on the environment, economy and communities may be highly significant. Pollution, difficulties in the use of public services, stress for residents, seasonal incomes, are all examples of the negative effects of seasonality. According to the World Tourism Organization (2004) the limitation of seasonality can favour the sustainability of tourism. Literature suggests private and public strategies to minimize the negative effects of tourism seasonality, as diversification of tourism products, identification of new market segments, launching events, application of public instruments like eco-taxes and use of differential pricing policies. Revenue Management is a managerial system based on differential pricing and able to affect price sensitive tourists. This research attempts to verify if Revenue Management, created to maximize profits in tourism companies, can also mitigate the seasonality of tourism demand, producing benefits for different stakeholders of destinations and contributing to Sustainable Tourism Development. In particular, the study attempts to answer the following research questions: 1) Can Revenue Management control the flow of tourist demand? 2) Can Revenue Management limit seasonality, producing benefits for different stakeholders of a destination? 3) Can Revenue Management favor the development of Sustainable Tourism? The literature review on Stakeholder Theory, Sustainable Tourism Development, tourism seasonality and Revenue Management forms the foundation of the research, based on a case study approach looking at a significant destination located in the Southern coast of Sardinia, Italy. A deductive methodology was applied and qualitative and quantitative methods were utilized. This study shows that Revenue Management has the potential to limit tourism seasonality, to mitigate negative impacts occurring from tourism activities, producing benefits for local community and to contribute to Sustainable Tourism Development.

Visual Segmentation-Based Data Record Extraction From Web Documents

Li, Longzhuang, Liu, Yonghuai, Obregon, A., Weatherston, M. Visual Segmentation-Based Data Record Extraction From Web Documents. Proceedings of IEEE International Conference on Information Reuse and Integration, 2007, pp. 502-507. Sponsorship: IEEE

Construction of a Festuca pratensis BAC library for map-based cloning in IFestulolium substitution lines

Iain S. Donnison, Donal M. O Sullivan, Ann Thomas, Peter Canter, Beverley Moore, Ian Armstead, Howard Thomas, Keith J. Edwards and Ian P. King (2005). Construction of a Festuca pratensis BAC library for map-based cloning in Festulolium substitution lines. Theoretical and Applied Genetics, 110 (5) pp.846-851 Sponsorship: BBSRC;BBSRC RAE2008